Mesin hobbing gigi - horizontal

MONNIER & ZAHNER KOEPFER MZ 120

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Technical Details Max. workpiece diameter: 2-45 mm Max. workpiece width: 250 mm Max. module: 1.5 mm Min. module: 0.5 mm Control: Fanuc 18i-MB Total power requirement: kW Machine weight approx.: 2.2 t Space requirement approx.: 2100 x 1440 x 1700 mm Additional Information: The KOEPFER MZ 120 combined CNC gear hobbing and worm milling machine is characterized by its flexible application and is used for small module production. The simple pivoting of the milling spindle from horizontal to vertical position and selecting the corresponding operating mode on the CNC control converts the worm milling machine into a gear hobbing machine and vice versa. CNC Control: Fanuc 18i-MB (Dialog/ISO) CNC axes: X-axis: Plunge axis Z-axis: Longitudinal axis C-axis: Workpiece spindle B-axis: Tool spindle V-axis: Loader axis, longitudinal A-axis: Swivel axis of the tool spindle head (available as option) Y-axis: Shift axis (available as option) With the following machining programs: Worm milling Gear hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles: Fpedpfx Adsx Sqiyjgjb Straight, helical, crowned gears Radial, radial-axial, climb and conventional milling Roughing, finishing Worm gears Straight-toothed bevel gears, face gear cutting (option only in partial process) Worms [Equipment] Coolant tank 300 liters with LNS Turbo MS 250 chip conveyor Retrofitted and from year 2021!!! Kraft und Bauer fire extinguishing system Helical parts feeder Machine documentation [Technical Data] Workpieces: Workpiece diameter: 2-45 mm Max. workpiece length: 250 mm Gear cutting length: 150 mm Max. module in steel: 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter: 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head: +/- 45° (hobbing) +/- 30° (worm milling) Shift travel: 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction arbor W 20 Max. speed of workpiece spindle: 770 rpm Milling spindle drive: 0.55 kW Max. speed of milling spindle: 8,000 rpm Axis drives: X-axis (plunge) / travel: 80 mm CNC-controlled Z-axis (longitudinal feed) / travel: 190 mm CNC-controlled C-axis (workpiece axis) CNC-controlled Rapid traverse: X-axis: 6,000 mm/min Z-axis: 6,000 mm/min Hydraulic unit: 0.37 kW

Kondisi: baik (bekas), Tahun pembuatan: 2002, Mesin dalam kondisi kerja yang baik. Suku cadang yang ditunjukkan dengan tangan tidak termasuk. Fodpfx Adjxbqnxjgopb

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control: Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travels (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3,000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Dimensions of the complete unit: 2670 x 2870 x 2645 mm Total weight of the unit: 6,300 kg Fpjdpjuuz Iijfx Adgsb The machine will be cleaned, overhauled, and all functions will be tested by us after receipt of order. Optional: - Commissioning at your location - On-site training - Chiller unit - Transport - Clamping bar set

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Mesin CNC pengasah alat Walter Helitronic Power FH, dengan pemuat palet silinder, penukar cakram 8-posisi, pemisah kabut elektrostatis, sistem pemadam kebakaran, pompa suplai oli, perangkat lunak Walter Window-Mode dan Toolstudio, paket perangkat lunak: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, dengan persiapan sistem hidrolik (lunette). Spindle penggiling (satu spindle) digerakkan langsung dan dilengkapi pendingin oli. Motor poros berlubang pada sumbu A dengan kecepatan putar 0-750 rpm. Sumbu C, X, Z, dan A telah direkondisi pada tahun 2022. Fpedpox E Dfbefx Adgsb

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), de-hu-20240615 Fpodpfxjw Rqwaj Adgob

Kondisi: bekas, en-technical-data-001 Fpsdpfjuha Elsx Adgeb

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: Heidenhain, model controller: TNC640, Technology: Direct drive Speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool holder: SK 40 Tool changer: 40 positions Working area Fpodpfx Aotpm Stedgjb Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 650 mm Fixed table (X/Y): 1,100 x 600 mm Table load capacity: 1,100 kg Miscellaneous Rapid traverse (X/Y/Z): 36/36/32 m/min Equipment Chip management: Hinged belt conveyor Coolant management: Internal coolant supply 20 bar Coolant filtration: Oil separator Electrical cabinet cooling: Air conditioning unit Workpiece measurement: Renishaw OMP 40

Tahun pembuatan: 2021, Kondisi: baru, Type: gas-fired with central recuperator Max. temperature: 1,300°C Fsdpfxjg E S Ino Adgjpb Max. furnace capacity: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA PLC: Siemens S7

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock / fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100% / 40% duty cycle kW 3.0 / 5.5 Torque 100% / 40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Toolholder stations quantity 8 driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Holder diameter mm 45 Drive power 100% / 40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Toolholder stations quantity 8 driven tools quantity 8 Max. speed rpm 12,000 Fodpswuddvsfx Adgepb Holder diameter mm 45 Drive power 100% / 40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back-working attachment Toolholder stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle capacity mm 20 Max. speed rpm 10,000 Drive power 100% / 40% duty cycle kW 3.0 / 5.5 Torque 100% / 40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system basic unit Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x width x height mm see installation plan* Weight kg 5,000* Connected load kW 40 (47 kVA)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds Fsdpfx Ajuxfucjdgopb - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...