Perangkat analisis air

Spectro Ciros CCD

Kondisi: sangat baik (bekas), Spectro Type: Ciros Vision CCD Analyzer Ciros Vision CCD Overall height: 162 cm, overall width: 150 cm, overall depth: 90 cm Adjustable exhaust Total air capacity 500 m³/h Condition: used Scope of delivery: (autosampler as shown) Itedpevyd Rusfx Aahor (Subject to alterations and errors in technical specifications and information!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Trafo distribusi kering kering, 3 unit, 2000kVA, produsen SGB Jerman, rasio tegangan 22000 (± 2 x 2,5 %) /400V, Dyn1, IP31 atau IP00, Al/Al, unit evaluasi suhu, berfungsi, kondisi fungsional. Itedpfx Aolpd Tceahor

Kondisi: bekas, System: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel on container frame, 30' container, scraper plates in PP (polypropylene) Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Principle: Wastewater is fed into the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected underneath the plates and flows upward through the lamellas. As a result, solids settle down onto the lamella plates. The clarified water is transported to the outlet. Solids on the lamella plates gradually slide down along the plates, where the sludge hopper is located. Rake Mechanism: Optionally, we offer the inclined clarifier with a rake mechanism to keep the sludge fluid. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be sized smaller in terms of filter area. Iodpfsppyhtox Aahstr The system is in good condition and available for rent or sale. Inspection at our plant is possible by appointment. We also offer new inclined clarifiers with a delivery time of approximately 8 to 10 weeks!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 06.E.400.020, Country of manufacture: CH Itjdpfeiqt S Aox Aaher Voltage: 3x400V - 24V DC Dimensions: 237x206x195 cm Net weight: 5500 kg TECHNICAL DATA Control: Fanuc 21i-MB 3 Axes U: Work grinding wheel axis W: Workpiece to workpiece / dressing axis X: Dressing wheel axis Working area Through-feed grinding Workpiece diameter: Ø 1.5 - 50 mm Working area Plunge grinding Workpiece diameter: Ø 1.5 - 100 mm Max. grinding length: 270 mm Grinding wheel Outer diameter max.: Ø 400 mm Inner diameter: Ø 203.2 mm Max. speed: 50 m/sec Drive power: 11 kW Optional drive power: 29 kW Regulating wheel Max. outer diameter: Ø 250 mm Inner diameter: Ø 127 mm Speed: 5 - 1,000 min⁻¹ Inclination angle: +5° / -5° Drive power: 3.7 kW Positioning accuracy All 3 axes: 0.1 µm Glass scale resolution: 0.05 µm Dimensions Length: 2060 mm Width (with door open): 2370 mm (3120 mm) Height (with guard open): 1950 mm (2100 mm) Weight: 5500 kg Compressed air Max. pressure: 16 bar Air consumption: 165 L/min Air consumption with dressing spindle: 250 L/min Temperature: +15° / +40°C Errors and omissions excepted, the technical data is provided without obligation.

Kondisi: baru, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with its advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping electrically and hydraulically pre-installed Itodjfg E Hwjpfx Aahjr • Chip conveyor The SNC 20 control system enables convenient and uncomplicated input of up to 20 different sawing jobs (length and quantity). Once the desired dimension is entered, the control system automatically calculates the kerf and the number of feed cycles. Additionally, the error code display system enables rapid fault analysis and troubleshooting.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, jam operasional: 16 h, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 400 mm, rentang pengukuran sumbu Y: 400 mm, rentang pengukuran sumbu Z: 200 mm, masa garansi: 12 bulan, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 200 mm, tegangan masuk: 230 V, panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 200 mm, tahun perombakan terakhir: 2025, suhu lingkungan (min.): 16 °C, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pencahayaan, Mahr Multiscope 442 Multisensor measuring device equipped with camera, laser, and Renishaw touch probe system With warranty and acceptance certificate upon delivery +++INTEREST-FREE FINANCING WITHOUT BANK TRANSACTION AVAILABLE ON REQUEST+++ Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCL. latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery with factory service or forwarding agent, worldwide. Online or optionally on-site demonstrations with customer parts, application-specific consulting by accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, installation, commissioning, accuracy verification according to standards, certification, and comprehensive acceptance documentation. Individual training and instruction programs also available as online courses. Iedpjdy Uvmofx Aahstr Rental, hire-purchase, or financing directly via Profitech and without financial institution possible. Measuring device can be individually configured to customer requirements. Measuring range all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: approx. 800kg Max. load capacity: glass stage 30kg Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. travel speed: 250mm/s incl. camera incl. laser incl. LED ring light incl. new frame grabber (Eagle) incl. dual monitor operation incl. CNC control and PC incl. new software OptiCheck3D V5.0 (full version, no subscription model) Possible upgrades: Windows 11, 64-bit CNC control, extended accuracy, complete package including calibration and training.

Tahun pembuatan: 2023, Kondisi: baru, - modern ergonomic design - manual testing process with analog dial gauge (reading accuracy 0.2 HR units) - simple operation and fast testing procedure - test space height approx. 185 mm - test space depth approx. 160 mm - dimensions 545 x 182 x 755 mm Iedopbbc Hepfx Aahstr Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - Prism support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16'' ball holder with ball - 120° Rockwell diamond indenter - Spindle protection - Accessory case

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 400 mm, rentang pengukuran sumbu Y: 500 mm, rentang pengukuran sumbu Z: 300 mm, Visio 500 mesin ukur 3D optik/taktile Ruang gerak 453 (400 X, 500 Y, 300 Z) Perangkat lunak pengukuran: PC-DMIS CAD Versi 2015 Gudang pengganti probe 6 slot, dengan total 2 modul TESASTAR MP Silent PC Big Tower dengan Windows 7 (semua sudah terinstal dan siap pakai) Kamera dengan zoom optik 200x, pencahayaan cincin/koaksial dan transmisif (diascopic) Semua berfungsi penuh. Sumbu Y memiliki goresan ringan, sudah dihaluskan. Tidak mempengaruhi fungsi atau akurasi. Itjdpoiyymrofx Aahor

Kondisi: baru, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangular 1250x600 mm Cutting range at 45 degrees: round 680 mm Cutting range at 45 degrees: square 600 mm Cutting range at 45 degrees: flat 870x600 mm Cutting range at 60 degrees: round 580/550 mm Cutting range at 60 degrees: square 530/450 mm Cutting range at 60 degrees: flat 550x450 mm Saw blade length: 8140 x 54 x 1.6 mm Isdofg E Hnopfx Aahstr Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter bandsaw for fast cutting with pusher system P15. Optionally P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to -60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved by the new "B&S positioning system". An intelligent NC control ensures smooth interaction between the linear encoder and the self-braking positioning motor, in combination with a reliable hydraulic brake via large radial center positioning. The worktable is supported by high-quality preloaded bearings, enabling very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided gripper positioning system The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper claws" which are hydraulically controlled. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is separately constructed and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. Iedpfx Aajfg E Hpjhjtr - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.