Wadah lipat

Monza 13,8 m³ - Doppelflügeltür

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Shear rotor, shredder dua poros, Daya penggerak: 110 kW (2 x 55 kW), Arus nominal: 210 ampere Lebar pisau: 75 mm Ukuran unit pemotong: panjang 1600 mm x lebar 980 mm Sistem penggantian pisau cepat, gearbox SEW, Termasuk unit penekan hidrolik, daya hidrolik nominal: 7,5 kW, Panel kontrol, Unit pemotong telah direkondisi, Dksdpfx Aewva Hiodgeg Dimensi: panjang sekitar 6150 mm x lebar sekitar 3100 mm x tinggi sekitar 3150 mm, Berat total: sekitar 17 ton

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Heating Oil Tank – Storage Container – Diesel Tank 5,000-liter capacity – brand new – compliant with EN 12285-2 – Class B (replacement for DIN 6616), aboveground, double-walled, incl. inspection certificate, suitable for installation in areas classified as earthquake zone 0. The tank is fitted with two saddle feet, a manhole with domed cover, and is equipped with the following fittings: - 1 filling pipe with TW cap (filling cap) and dip tube Dksdji Ar D Sspfx Adgeg - 1 gauging pipe with dipstick and dipstick cap - 1 vent pipe with vent hood - 1 brand-new overfill prevention device with type approval (AIII) - 1 ladder plus 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak detection fluid The tank exterior is sandblasted, primed, and painted in RAL1018 zinc yellow. (Other RAL colors available, e.g., RAL7011 iron grey) L = approx. 2.80 m – D = 1.60 m – Weight approx. 1.5 t – ex works, free loaded. The tank is suitable for storing HVO (Hydrotreated Vegetable Oil). General: You will receive an invoice with VAT shown separately. Purchase is made subject to our general terms and conditions. Additional tank systems (new and used), as well as rental units, are also available! Furthermore, we also purchase existing tank systems and can professionally empty, clean, dismantle, and transport them with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG).

Kondisi: baru, berat kosong: 17.250 kg, berat muatan maksimum: 48.700 kg, berat keseluruhan: 66.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 7.550 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 375 mm, ukuran ban: 245/70 R 17.5, warna: abu-abu, berat operasi: 17.250 kg, Perlengkapan: ABS,

Tahun pembuatan: 2025, Kondisi: baru, 1 Dkodjqxrhcopfx Adgeg

Kondisi: bekas, jarak tempuh: 570.000 km, daya: 294 kW (399,73 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, konfigurasi gandar: 3 gandar, berat keseluruhan: 26.000 kg, pendaftaran pertama: 05/2002, panjang ruang muatan: 8.400 mm, lebar ruang muat: 2.350 mm, kelas emisi: Euro 3, warna: merah, Perlengkapan: pemanas parkir, pendingin udara, * Mercedes-Benz 2540 Actros MP1 construction machinery transporter * First registration: 2002 * 570,000 km * Euro 3 * Telligent manual transmission with clutch * Air conditioning * Auxiliary heater * 6x2 axle configuration * Leaf/air suspension * Rear-steer tag axle * Hydraulic ramps * Superstructure dimensions: 8.40 x 2.35 m * Loading height: 110 cm Dksdpsv H Iaysfx Adgog * Wheelbase: 5.90 m * Unladen weight: 12,300 kg * Payload: 13,700 kg * Overall vehicle length: 11.35 m

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: Dedpfx Asvf E Avodgjkg - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baru, berat kosong: 17.500 kg, berat muatan maksimum: 43.500 kg, berat keseluruhan: 61.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 7.550 mm, lebar ruang muat: 2.750 mm, tinggi ruang muatan: 400 mm, ukuran ban: 245/70 R 17.5, warna: abu-abu, Perlengkapan: ABS,

Kondisi: baru, 1 Dkjdpfew Rzn Njx Adgog

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Shredder 2 poros RSS seri 600, 2 x 7,5 kW Panjang rotor: 600 mm Pisau: 30 mm Mesin dapat disesuaikan sesuai keinginan Anda, termasuk panel kontrol. Waktu pengiriman berdasarkan kesepakatan. Opsi konveyor masuk dan keluar tersedia. Shredder ini sangat cocok untuk penghancuran harddisk, laptop, ponsel, karet, kayu, kertas, dll. Ingin tahu lebih lanjut? Silakan hubungi kami via telepon atau email. Dedpfx Adow Ry Alsgekg Pengiriman dan instalasi mesin juga bisa kami lakukan berdasarkan kesepakatan. Mohon balas dengan nama, nama perusahaan, dan nomor telepon yang valid untuk respon cepat.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Diesel fueling station – Yard fueling station – On-site fueling station – consisting of: 1 x storage tank, 10,000 liters capacity, used 1 x dispenser/pump, type Eco 75, brand new Tank Description: In accordance with DIN 6616-D, above ground, double-walled, incl. certification. The tank is equipped with two saddle supports, a manhole with domed cover, is used, internally emptied and professionally cleaned, and is supplied with the following fittings: - 1 fill pipe with TW cap (tank fill cap) and dip pipe - 1 gauge pipe with measuring rod and cap - 1 vent pipe with vent cap - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection fluid The exterior of the tank will be newly primed and painted (RAL color). L = approx. 5.30 m - D = 1.60 m - Weight approx. 2.4 t - ex works, free loaded - Pump/Dispenser Description: Type Eco 75 – not for metrological use, Flow rate up to approx. 75 l/min, suitable for diesel fuel, incl. - Pump terminal with connection to myTecalemit Cloud - incl. web-based tank data management software – Basic Module - 2 identification systems (driver/vehicle) for up to 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane pump with single-phase asynchronous motor – 230 Volts - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle-seat filter / fine particle filter - 4 m dispensing hose DN 25 with type-approved automatic nozzle, incl. swivel and hose holder Dsdpfji An Ufox Adgokg - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Two-line, illuminated monochrome display, character height 8 or 19 mm - Storage for up to 10,000 transaction records - Menu navigation in German, English and French Magnetic keys / transponders are additionally required. General: You will receive an invoice showing VAT. Purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental systems also available! Additionally, we purchase existing tank systems and can, with certified specialist qualifications in accordance with the German Water Resources Act (§62 WHG), professionally empty, clean, dismantle and remove them.