Pusat pemrosesan

Morbidelli

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Bledpfx Ajxy Tmnoiyjh Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, en_001 Bedpfx Aijvc Akljyjlh

Kondisi: bekas, Tahun pembuatan: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Aggregate and Accessories Description (Basic) The machine base structure is a monolithic design made from thick-walled steel. It is reinforced with welded triangular plates throughout the entire machine bed, providing extreme stability. The use of a triangle shape with a broad base for all load-bearing elements is the key to ensuring long-term precision and stability. The machine layout allows the operator to achieve an optimal workflow with minimal space requirements. This foundation provides a balanced, secure base for the processing unit with excellent load distribution. The mobile portal-type aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis along ground prismatic guides via recirculating ball carriages. The working aggregate is mounted to this portal carrier on ground prismatic guides and recirculating ball carriages. Axis Movement: Y and Z axes are driven by precision-ground recirculating ball screws of the highest accuracy class. The X-axis drive is a backlash-free, preloaded precision rack-and-pinion system. This ensures even load distribution during positioning, which is crucial for balanced movements even in complex operations. Axis movements are realized by brushless AC servo motors. These provide outstanding positioning speeds with very short ramp times. Additionally, all motors feature fully integrated measurement systems, making this drivetrain entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control / Electrical Cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control system. The integrated office PC provides an unmatched level of familiarity to the NC system: the software operates on Windows XP, allowing fast and simple programming—even for inexperienced users. The system is open and allows connections to a CD-ROM drive, audio card, barcode reader, modem, printer, scanner systems, etc. Installation of any network systems or commercially available CAD programs is also possible. To save space, the electrical cabinet is mounted beneath the machine table, while the operator uses a separately mobile, wheeled console that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - Operator interface available in native language (I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, helical on selected plane - Assisted programming - Calculator for direct transfer of computed data - Graphical and syntax aids for drilling and milling operations - Parametric programming for repeating panel machining on different p Bledpevvi Nzofx Aiysh

Kondisi: bekas, Tahun pembuatan: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE - WORK CELL VERSION X400 CELL Drilling and Milling Made for You! The numerically controlled machining center comes equipped with a comprehensive range of accessories and tooling for milling and drilling, designed to meet any requirement in the processing of wood and similar materials. - High-performance: Equipped with drilling spindles capable of 8,000 rpm and industry-leading spindle technology, it features the most robust spindle currently available on the market, offering over 1,000 hours of maintenance-free operation. - Superior and more comprehensively equipped: Multiple configuration options via the multifunction table ensure the machine can be optimally adapted to any operational requirement. Bjdpevvi N Ijfx Aiyolh - Easier and more intuitive programming thanks to the integrated MAESTRO CNC CAD-CAM module. - User-friendly: The worktable is accessible at all times, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no protective barriers. Load-Bearing Structure The supporting structure consists of an exceptionally robust monolithic steel base, heavily ribbed and highly rigid; the particularly wide support surface was specially designed to give the machine stability and to maintain ongoing precision under all working conditions, with no need for anchoring to the floor. The base provides a large, solid platform for the moving gantry: the work unit thus benefits from a balanced, stable, and resilient support capable of withstanding heavy use, resulting in higher quality performance and increased accuracy. The moving gantry itself is a sturdy single piece anchored on both sides of the base and runs on top-grade prismatic linear guides with recirculating ball shoes. The dual drive system on the X-axis delivers peak performance even under heavy-duty conditions. The movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is driven by helical rack and pinion transmission, offering increased tooth-to-tooth engagement for higher acceleration and greater speed along both the X and Y axes. The specially designed helical teeth ensure reduced wear of mechanical parts and significantly quieter operation. The vertical Z-axis is driven by a recirculating ball screw, engineered to deliver perfect balance under dynamic load and handle both rapid acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the highest quality of finishing work by completely eliminating potential vibrations. Movement along the X-Y-Z axes is driven by brushless motors powered by static inverters, which provide: - Reduced processing times thanks to improved acceleration - Increased positioning accuracy due to high-resolution encoders - No need for setup resetting when the machine is powered on thanks to absolute encoders - Minimal maintenance, as the brushless system eliminates the need for brushes Axis movement and all machine work functions are managed via an industrial NS module with digital D...

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Blsdpjd N Rb Defx Aiysh Swivel heads. Drilling heads on each side at the front included. Very good condition. Available immediately.

Kondisi: bekas, Tahun pembuatan: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel range X-Y: 4,200 x 2,000 mm Description of units and accessories (standard configuration) The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, providing exceptional stability. The triangular shape used for the load-bearing elements, with a wide base, is the secret to ensuring long-term precision and stability. The machine layout allows the operator an optimal workflow even with minimal space requirements. Thus, the base structure provides the machining unit with a balanced and secure foundation with particularly good load distribution. The moving portal-type aggregate carrier is constructed as a solid monoblock. It is positioned in the X direction on prismatically ground guides and recirculating ball bearing carriages. The working unit is also mounted on prismatic, ground guides and recirculating ball carriages on this mobile aggregate carrier. Axis movement: The drive system for the Y and Z axes uses ground recirculating ball screws of the highest precision class. The drive in the X-axis is via a backlash-free, preloaded precision rack-and-pinion drive. This ensures balanced load distribution during positioning. Such characteristics are essential for smooth movement even during more complex operations. The movement of the individual axes is performed by brushless AC servomotors. These motors offer excellent positioning speed due to very low ramp-up times. Furthermore, the measuring systems are fully integrated into these motors, making this drive type completely maintenance-free. · Rapid traverse speed in X: 40 m/min · Rapid traverse speed in Y: 60 m/min · Rapid traverse speed in Z: 22.5 m/min Vacuum system (standard) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control / Control cabinet · Office PC or industrial PC (see options) · Standard NC control: ESA-GV KVARA 6.0 · Cable remote control with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unmatched level of familiarity: the software operates on Windows XP, allowing fast and easy programming that is also user-friendly for inexperienced operators. The system is open, permitting the connection of a CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Additionally, all common network systems and commercially available CAD programs can be installed. To save space, the control cabinet is placed beneath the machine table, while the operator works at a separate, movable terminal on castors. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator’s native language (available in languages: I - GB - F - D - E) - Straight line and circular interpolation in three axes, linear in space, spiral in the selected plane - supported programming - Calculator for direct data transfer - Graphic and syntax help for drilling and milling operations - Parametric programming, enabling identical panel machining on various Bjdjvvi Rfspfx Aiyolh

Kondisi: bekas, Tahun pembuatan: 1991, Fungsionalitas: belum diuji, Bidang kerja 3130 x 1100 mm Tinggi pemrosesan maksimal untuk pemrosesan pintu: 70 mm Diameter konektor ekstraksi: 200 mm 1 unit pengeboran utama dengan 29 spindle independen, jarak sumbu 32 mm Unit spindle atas dengan koneksi LEUCO: 2 unit Bedpfxjxu Eyvj Aiyelh Unit alur: 1,1 kW Unit spindle horizontal untuk kotak kunci Kepala bor horizontal dengan 2 spindle Kepala bor horizontal untuk pengeboran samping kanan dan kiri: 3 unit Konverter: 17 kW Dimensi mesin PxLxT sekitar 5000 x 3000 x 1800 mm Berat sekitar 3500 kg

Kondisi: bekas, Connect 4 – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions OUR OFFER Bljdpjvdqhbsfx Aiyeh Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of your goods. PAYMENT TERMS Payment terms are to be individually agreed upon in case of an order. The price refers to one unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US Based in Nordhorn, DLK trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for commerce, industry, and crafts. We continuously offer attractive second-hand deals from various manufacturers/brands at favorable conditions. If you have any questions, please feel free to contact us.

Kondisi: bekas, nomor mesin/kendaraan: 005449, Posisi 2: Mesin bor CNC MORBIDELLI-FLEXA 912+FLEXA 902 Bjdpfxjwucl Es Aiyslh Posisi 3: Mesin bor dan pemasang dowel horizontal otomatis MORBIDELLI-FLEXA 912+FLEXA 902

Kondisi: bekas, nomor mesin/kendaraan: 005446, Area kerja sumbu X: 3000 mm Area kerja sumbu Y: 1300 mm Bljdpfjwuciqex Aiyeh Jumlah sumbu yang dikendalikan: 3 sumbu Jumlah spindle bor: 112

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Single-screw extruder WEBER NE5 1-30:D with 2 WEBER ZE30 co-extruders Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: Suitable for PE, PP, or three-layer pipe production, or for sheathing pipes with strip application The line was used for manufacturing heating pipes Condition: Very good 2 units WEBER ZE30 co-extruders Screw diameter: 30 mm Bledpfxshy Tp De Aiysh The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany

Kondisi: bekas, Tahun pembuatan: 2011, Area kerja X-Y: 4.422 x 1.753 mm; Perjalanan X-Y: 4.955 x 1.918 mm; Panjang lintasan sumbu Z: Z = 400 mm; Spindel milling 5-sumbu MORBIDELLI; Rotasi sumbu C: 650°; Kemiringan sumbu B: 290° (-10°); Daya: 11 kW pada 20.000 rpm, dapat diatur via inverter; Pendingin cairan; Antarmuka HSK 63F; Konveyor serbuk; Pelumasan sentral CNC otomatis; Penukar alat RAPID 24 (24 slot alat); Ekstensi kepala bor dengan 30 +6 spindel; 8 alat bantu posisi; 2 laser silang; Pompa vakum 250 m³/jam; Kontrol PC dengan Windows Office; Berat sekitar 5.000 kg.\nLokasi penyimpanan: Pelanggan Bedjy D Rv Djpfx Aiyslh

Kondisi: sangat baik (bekas), NOMOR KATALOG: 6059 SPESIFIKASI TEKNIS - jumlah spindel horizontal: 2×20 buah - jumlah spindel vertikal: 1×20 buah - jarak antar spindel paling luar: 610 mm - jarak antar spindel: 32 mm - langkah silinder pendorong: 60 mm - panjang maksimum benda kerja: 3400 mm - pengaturan spindel horizontal atas/bawah, depan/belakang - pengaturan spindel vertikal kanan/kiri - setiap unit bor dapat dioperasikan secara terpisah - mata bor kanan – kiri, dipasang menggunakan ulir (diputar masuk) - 3 penjepit pneumatik - daya motor: 4×1,85 kW - kebutuhan udara: 6-8 bar - dimensi p/l/t: 4600x1180x2200 mm Bjdpfoy Sz Umsx Aiyelh - berat sekitar 1500 kg Harga netto: 12.900 PLN Harga netto: 3.070 euro (tergantung kurs, dipakai 4,2 PLN/EUR) (Harga dapat berubah jika terjadi fluktuasi nilai tukar yang signifikan)

Tahun pembuatan: 2016, Kondisi: bekas, Cortadora y dobladora MEP, SYNTAX 28 Bsdpfjxl Avvjx Aiyolh

Kondisi: bekas, Tahun pembuatan: 2006, Area kerja X-Y-Z: 5300 x 1700 x 180 mm Panjang lintasan X-Y-Z: 6040 x 1810 x 280 mm Kepala bor dengan 30 + 8 spindle Kecepatan putar: 6000 rpm Daya: 2,2 kW Pelumasan sentral otomatis Meja kerja TV dengan 10 penyangga L=1500 4 area kerja 2 laser silang Pompa vakum 250 m³/jam Kontrol PC Windows Unit frais vertikal ISO 30, 7,5 kW dengan penukar alat RAPID 14 dan poros vektor Unit bor tambahan (poros E) Dongle untuk perangkat lunak XILOG Lokasi penyimpanan: Nattheim Blsdjx Twd Hspfx Aiyjh