Mori Seiki NZ2000T2Y

Kondisi: bekas, Tahun pembuatan: 2011, Maximum turning diameter: 320 mm Maximum turning length: 810 mm Control unit: MSX-701 IV Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Distance between centers: 1,130 mm Maximum spindle speed: 5,000 rpm Main spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter in front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis resolution: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Maximum spindle speed: 5,000 rpm Sub spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter in front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis resolution: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed of driven tools: 6,000 rpm Driven tool drive power: 7.5 / 5.5 kW Njdpfxjv E R E Nj Abuowb Y-axis travel: 110 mm Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed of driven tools: 6,000 rpm Driven tool drive power: 7.5 / 5.5 kW Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm Sub-spindle travel B: 870 mm Rapid traverse (X / Y / Z) 1: 30 / 20 / 50 m/min Rapid traverse (X / Y / Z) 2: 30 / - / 50 m/min Feed rate: 0 - 5,000 mm/min Total power requirement: 94 kVA Machine weight approx.: 8.3 t Space requirements approx.: 10.0 x 3.0 x 2.5 m CNC Turning and Milling Center MORI SEIKI - NZ 2000 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Kondisi: baik (bekas), Tahun pembuatan: 2013, de-1 Nedpfx Abexpg Ecsuewb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 810 mm, diameter putar di atas sled silang: 800 mm, diameter pembubutan: 320 mm, daya motor spindle: 25.000 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 73 mm, jarak pergerakan sumbu X: 210 mm, jarak lintasan sumbu Y: 110 mm, jarak gerak sumbu Z: 810 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan rotasi (maks.): 6.000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centers: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret axes X1 and X2: 210 mm Turret axes Y1 and Y2: +65 / -45 mm Turret axes Z1 and Z2: 810 mm Head B-axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Motor power (30 min/continuous): 25/22 kW Maximum bar machining diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum spindle speed: 5,000 rpm Motor power (30 min/continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank cross-section: 20 x 20 mm Maximum boring bar diameter: 32 mm Turret indexing time (1 station): 0.18 s Nedewlvlgjpfx Abuowb Maximum speed of driven tools: 6,000 rpm Driven tool power (5 min/continuous): 7.5/5.5 kW DIMENSIONS Installation area with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry-type parts unloading arm • Cutting load management and load monitor system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 hydraulic chucks, dia. 210 mm • 1 set of jaws for each hydraulic chuck • Manuals and CE Declaration of Conformity Year of manufacture: 2010

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management Njdoxmhdnspfx Abuowb - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2000, 1250 mm x 880 mm x 800 mm Spindel motor 12.000 rpm Kepala H/V Meja putar NC sumbu C Kontrol Heidenhain MillPlus SK-40 Penukar alat otomatis 30 posisi Pendinginan bertekanan internal 40 bar dengan sistem filter celah terpasang tambahan Konveyor serbuk Handwheel elektronik Kecepatan pemakanan 15.000 mm/menit Gerak cepat 40 m/menit Nwedpfxoxfi I Eo Abueb Berat mesin 12.200 kg Daya terpasang 46,00 kVA

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.540 mm, diameter pembubutan: 660 mm, Ayunan di atas crosslide: 660mm Panjang pembubutan: 1540mm Lubang spindle: 91mm Kecepatan spindle utama/sub: 4000/5000rpm Majalah alat: 76 posisi Tirus pada spindle milling: Capto C6 Kecepatan spindle milling: 12000rpm Motor spindle: 26/22kW Daya masukan maksimum: 200V/255A Tahun pembuatan: 2013/9 Panjang: 5825mm Lebar: 2850mm Tinggi: 2750mm Berat: 15860kg Sumbu B penuh Pendingin melalui spindle milling 70Bar Knoll 110/700 Pengambil komponen dan sabuk keluar Presetter otomatis untuk turret bawah & spindle milling Antarmuka robot (tanpa robot), pintu otomatis & siap untuk barfeeder Fungsi tailstock pada spindle 2 Probe Renishaw OMP60 Nwodpfx Abox A E U Neusb Kontrol CNC simultan 5-sumbu MAPPS-IV 5 kode M tambahan

Kondisi: sangat baik (bekas), Doppelspindel_Y-Achse Nwjdpfox A Eupox Abueb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NL201IJ3007, MORI SEIKI NL2000/500 PUSAT BUBUT CNC TAHUN 2005, 2006, 2009 KONTROL MSX-850 CHUCK KOLLET TOOLING BERGERAK 4 AXIS Nodpfx Abjwxw Ivjuswb BAK PENAMPUNG SERPIHAN REVOLVER 16 ALAT TAILSTOCK CATCHER PARTS PROBING ALAT UKUR KECEPATAN SPINDEL MAKS 6000 RPM MAX DIAMETER BUBUT 356 MM PERGERAKAN X 260 MM PERGERAKAN Y 100 (+-50) MM PERGERAKAN Z 590 MM GERAK C AXIS 0.001 KAPASITAS BATANG 65 MM MESIN DILENGKAPI TANGKI EKSTRAKSI PLASTIK MESIN UTAMA DIGUNAKAN UNTUK PLASTIK, KONDISI SANGAT BAIK TERIMA KASIH TELAH MELIHAT DIMENSI MESIN: - Panjang: 2.705 mm - Lebar: 2.000 mm - Tinggi: 2.120 mm - Berat: 5.800 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, DETAIL TEKNIS Perjalanan X / Y / Z: 1.250 / 880 / 800 mm Kontrol: Heidenhain Kecepatan putar: 10.000 rpm Sumbu B: otomatis Jumlah posisi pengganti alat: 60 Tipe dudukan alat: SK-50 Jumlah palet: 2 unit Ukuran palet: 1.000 x 800 mm DETAIL MESIN Waktu hidup mesin: 59.112 jam Jam spindle: 21.619 jam Dimensi transportasi mesin: 5,5 x 3,0 x 3,1 m; 14,3 t PERLENGKAPAN - Handwheel elektronik - MillPlus kontrol lintasan 3D - Udara tekan tengah spindle - Probe pengukur - Pistol pembilas - Dokumentasi - Konveyor serbuk (belt engsel) - Sistem pendingin Nodpjxdnclsfx Abuswb - Penyedot kabut oli

Kondisi: baik (bekas), Tahun pembuatan: 2000, panjang pembubutan: 300 mm, diameter putar di atas sled silang: 520 mm, diameter pembubutan: 320 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 219 mm, jarak gerak sumbu Z: 310 mm, de Nedpfx Aex Hp Hgjbuewb