Beli Albert Goecker Kg bekas (66.569)

Kondisi: sangat baik (bekas), Type ER 9-0.8, wire range 0.5-0.8 mm, as-new condition devices, several available Cedpfx Aey Eyy Iog Dogt

Tahun pembuatan: 2024, Kondisi: baru, oris- Extruder MINI ESE 20/25 D Cgsdpfx Aehx Elfog Djt Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 min⁻¹ Screw axial pressure [bar]: 300 (continuous operation), 350 (maximum) Drive: Three-phase motor with frequency converter Drive output [kW]: max. 2.5 Reduction gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590* Electrical connection values: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control: electric resistance heating bands with mica insulation Max. processing temperature [°C]: 300 Control cabinet and control panel The electrical installation of the extruder is housed in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the buyer, and a chiller unit for water cooling is not included in the offer. Extruder tooling is not included in the offer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Cgedpjyz Af Ejfx Ag Det Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 6034, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 590 mm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, daya nominal (semu): 45 kVA, produsen pengendali: HEIDENHAIN, model controller: Bahnsteuerung iTNC 530, tinggi total: 2.900 mm, panjang total: 12.500 mm, lebar total: 4.810 mm, berat keseluruhan: 14.000 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 12.000 rpm, tekanan kerja: 7 batang, The BZ 7000 is intended exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastic, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 - Year of manufacture: 04/2008 Cgedpfjyzxfnjx Ag Djt - Control system: HEIDENHAIN iTNC 530 path control - 4 axes - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Weight: 14t Equipment - Sturdy base frame in welded construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X axis (50 m/min) via rack and pinion drive - Y and Z axes (25 m/min) via ball screw - B axis 9000°/min - Swiveling operator panel - Automatic centralized lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 –25 -25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc magazine with 12 SK 40 tool positions - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed correction: 80 – 120 % - Drilling capacity in St60/Alu: up to 28mm Ø - Thread cutting capacity in St60/Alu: up to M24 - Measurement system: rotary encoder / length measurement system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V24/RS-232-C - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB(A)

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pabrikan: DEMAG Cgjdpsyu R Dzofx Ag Dot Kapasitas beban: 860 kg + 630 kg (dilengkapi dengan dua crane) Dimensi teknis yang tepat ditunjukkan pada gambar Rel crane dapat diperpanjang dengan struktur dan kaki yang ditunjukkan pada gambar, namun, elemen rel lain juga diperlukan untuk perpanjangan, yang tidak tersedia!!

Kondisi: sangat baik (bekas), Dijual ragum mesin profesional, dirancang untuk bekerja di lingkungan produksi berat. Struktur baja yang kokoh, rel pemandu presisi, dan area penjepitan yang luas memastikan stabilitas dan kekakuan bahkan saat menangani komponen besar. Spesifikasi: • Berat per unit: sekitar 120 kg • Rahang kerja besar – lebar sekitar 200 mm • Rentang rahang kerja: sekitar 310 mm • Konstruksi besi tuang–baja yang kuat • Rel pemandu geser dikeraskan • Ideal untuk mesin frais besar dan pusat pemesinan CNC. Kondisi: bekas, berfungsi, tanda-tanda pemakaian normal. ///// HARGA TERTERA PER 1 UNIT ///// Codpfxjw R S S Ee Ag Dsgt

Kondisi: hampir baru (bekas), Staff Ice System BTX150 Mesin Pembuat Es Batu / Pembuat Es 150 kg/24 jam, Tahun 2022. Data Teknis: Gelato BTX150 A Staff Ice System Mesin pembuat es krim untuk produksi dan penyimpanan es krim. Produksi dan penyimpanan es krim. Ekstraksi otomatis. Pengaduk dengan bilah polietilena tahan lama. Tutup ganda memungkinkan penambahan bahan selama proses. Tangki vertikal untuk kontrol penuh atas transformasi proses. 50 program operasi yang dapat disesuaikan. Spesifikasi Teknis: Kapasitas produksi maksimum 2 liter es krim per siklus. Produksi es krim 15 l/jam. Dimensi 43,5 x 59,2 x 59,5 cm. Cgedsyzc Ruspfx Ag Dst

Kondisi: baru, Tahun pembuatan: 2025, Persiapan Media Peledakan Codpfx Agew Ivvce Dsgt 1x Lubang Pembersih 1x Elevator Ember 1x Separator Angin 1x Ayakan Getar Listrik 1x Bunker Media Peledakan 1x Mesin Peledak Tekanan 200l 1x Selang peledak, nosel peledak, saklar darurat (Deadman), kabel kontrol 1x Lemari Kontrol Aksesori opsional: - Sekrup transportasi melintang sepanjang lebar ruang sandblasting (juga dapat digunakan sebagai silo cadangan tambahan untuk proses peledakan berjam-jam) - Ekspansi untuk 2 media peledakan: ferit dan mineral - Drum separator magnetik - Tahap demagnetisasi akhir - Laci magnet

Kondisi: baru, Tahun pembuatan: 2025, High Cube Basic Blasting Container with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + additional blasting vessel capacity for extended blasting operations without refilling. Type: SC.20FHC.5800 Basic Standard equipment, ready for operation: (Simply fill abrasive media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo controller - 1x Pressure blasting pot - 1x Pressure regulator and water separator Cjdpfxjw Ivk Tj Ag Degt - 1x Blasting hose DN 25 with 8mm blast nozzle - 1x Remote control with dead man’s switch - 1x Feed chute/Hopper for abrasive media - 1x Abrasive sieve + coarse particle catchment container - 1x Rising air separator for blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall with louvered impact separator - 1x 4mm fabric-reinforced rubber wall lining - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, end-of-door switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open: Container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane runway 500kg - C-profile rail for powder coating applications - Blasting trolley - Filter with Big Bag - HEPA post-filter for hazardous dusts (e.g., when blasting stainless steel) - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tekanan: 6 batang, masa garansi: 60 bulan, lebar dalam: 5.000 mm, panjang dalam: 15.000 mm, tinggi dalam: 5.000 mm, luas filter: 352 m², laju aliran volumetrik: 22 m³/jam, Perlengkapan: dokumentasi / manual, pencahayaan, Blasting house *up to 5 years warranty* for all blasting media made from a steel structure/insulated panels with filtration system, recirculation system, abrasive recovery, 200l pressure blasting vessel with automatic refilling, blasting hose with dead-man control, breathing air system, LED lighting, wall cladding 70 Shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Cgedpfx Agju Hy Tpj Det Abrasive recovery via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across the full width as sweep pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with an appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air separator for abrasive separation and cleaning. Safety features: emergency lighting with battery, emergency stop switches inside the cabin and outside, inspection window to blasting chamber, door/gate limit switches, dead-man control, quick venting for pressure vessel. Warranty up to 5 years on various components. 50 years of experience and more than 3,000 installations in blast room plant engineering.

Kondisi: baru, Tahun pembuatan: 2026, Gerobak sandblasting 5t penggerak baterai untuk instalasi sandblasting Codpfsyyxidox Ag Djgt - Kapasitas muat 5t - Untuk sistem rel - Penggerak baterai - Remote control - Ukuran: P = 3000 mm, L = 1000 mm - Area untuk pemasangan dudukan benda kerja

Kondisi: baru, Tahun pembuatan: 2026, Gerobak sand blasting 10t untuk instalasi sand blasting dengan penggerak pneumatik. - Penggerak pneumatik untuk beban 10t Csdpfxjyyxfre Ag Dogt - Kapasitas muatan 10 t - Ukuran: P=2000mm L=2000mm T=500mm - Untuk sistem rel - Dengan permukaan penampang untuk dudukan benda kerja - Meja putar sebagai opsi

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Gerobak sandblasting manual untuk instalasi sandblasting, kapasitas muatan 5 ton - P= 3000 mm, L= 1500 mm, T= 500 mm - Kapasitas beban: 5 ton - Gerobak sandblasting dengan roda flens untuk rel di ruang sandblasting Cjdoyyxa Nepfx Ag Djgt - Profil berdiri tegak agar media blasting dapat mengalir - Telinga tarikan untuk forklift - Meja putar tersedia sebagai opsi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.500 kg, Perlengkapan: kendali jauh kaki, 3 Poros PEMA Meja Las APS 1500 - Ketinggian dapat diatur tanpa tingkat - Termasuk remote control manual - Beban maksimum 15.000 N - 1.500 kg - Kecepatan putar 0,07 - 1,3 rpm - Torsi rotasi 1.000 Nm Cjdpfxeyupd Hs Ag Dogt - Kemiringan hidraulis hingga 135° - Momen kemiringan 3.000 N - Arus las maksimum 700 A - Diameter pelat 700 mm - Tinggi 780 - 1.550 mm - Dimensi 1.640 x 810 mm - Sambungan 3 x 400 V / CEE 16A - Berat 730 kg

Tahun pembuatan: 2020, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan pipa KD bekas ini dengan diameter 315mm, pipa limbah KG 2000 KG, warna hijau, tahun pembuatan 2020. Sekitar 70m, panjang pipa 5m, berbagai jenis elbow, sambungan Y, dll. Cgedpfx Agoyyml Ts Det Rentang suhu: -20 hingga 90 °C Material seal: cincin karet sesuai DIN EN 681 Warna: hijau muda RAL 6017 Bahan: Polipropilena (PP) Kekakuan cincin SN: 10 kN/m² Kedap air (dijamin hingga): 7,0 bar Ketahanan kimia (rentang pH): 2 hingga 12 pH Konduktivitas termal: 0,04 W/(K·m) Koefisien muai panjang: 0,08 mm/(m·K) Modulus E jangka pendek: 2500 N/mm² Modulus E jangka panjang: 450 N/mm² Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 6.500 kg, Load capacity: 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (extendable) Space-saving and infinitely adjustable; the extension arms can be locked in position Speed continuously variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transmission: 2,000 A Cgjdpfx Aswd Twqog Dst Weight: 4,700 kg Supplied with hand and dual-foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original sales invoice from 2016 Current new price approx. €28,000

Tahun pembuatan: 2015, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED INSERTING UNIT FOR METAL SHEET REINFORCEMENTS This system is part of a larger production line; please refer to our other listings for more details. The offered equipment includes 3 staging areas for cover layers, an automated adhesive application machine for sandwich panel bonding, a conveyor belt for manual assembly of inlays/ribs, gantry systems for handling the cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, Sheet metal, Plywood, Timber/PU battens, PVC, Styrofoam ADHESIVE GANTRY FOR CONTOUR & SURFACE BONDING (of cover layers & inlays): Number of area needle valves: 104 Number of contour needle valves: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate-controlled cabin (for storage of 1K-PUR adhesive) Vacuum pump for gantry systems Csdpfx Agsyt Nm Ss Degt Punching unit

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a copying milling machine made by Franz Kuhlmann KG, model series GM ½. The machine is fully functional and ready for immediate use. Technical data: X-axis (Longitudinal travel): 330 mm Y-axis (Transversal travel): 200 mm Z-axis (Vertical travel): 280 mm Template table: 500 x 400 mm Cgsdpfxswal Dhs Ag Djt Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet chuck bore up to 8 mm Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be organized across Europe at extra cost, if required. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Mesin otomatis untuk penjilidan, jahit dan potong (VSRA), dirancang untuk produksi massal brosur dengan penjilidan kawat. Kondisi kerja. 4 stasiun (feeder otomatis) untuk memasukkan lembaran buku. Format maksimum (terpotong): 30,5 x 34,9 cm. Cgjdpfjyb Tcaox Ag Dot Format minimum (terpotong): 8,9 x 12,0 cm. Tidak ada dokumentasi.

Kondisi: hampir baru (bekas), Fungsionalitas: tidak berfungsi, kapasitas angkut: 6.500 kg, Load capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Space-saving and continuously adjustable; extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transmission: 2,000 A Weight: 4,700 kg Includes hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original offer invoice from 2016 Current new price approx. €28,000 Cjdpfx Agjx Thuco Degt

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 15.606 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.050 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 700 mm, berat bal: 500 kg, daya: 30 kW (40,79 hp), laju aliran volumetrik: 160 m³/jam, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (main control valve on hydraulic block replaced) and tested in continuous operation, both in manual and automatic mode. The machine documentation is available in German. An inspection of the press is possible in our workshop by appointment. Cgsdpfx Ageyplwfo Djt We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Kondisi: baru, Tahun pembuatan: 2026, Kabinet sandblasting tekanan untuk penyemprotan bagian dalam pipa dengan meja putar dan mode operasi manual - Sistem filter - Meja putar dengan prisma sebagai penyangga pipa Csdpfx Asyn Inwsg Dsgt - Lanse bagian dalam pipa digerakkan - Penyimpanan program, jarak tempuh, kecepatan pengumpanan, fungsi hembus - Nozzle sandblasting luar dengan osilasi (opsional)

Kondisi: baru, Tahun pembuatan: 2026, Blasting cabin, 4-axis controlled, for cleaning of casting molds, steel rings, dies in aluminum casting, tire molds, press tools, etc. The travel path of the blasting nozzles is freely programmable. Equipped with 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning parts. Hardox turntable and screw conveyor ensure long-lasting use of the blasting system. For questions regarding technical specifications, please contact us in writing or by phone. Cgodpjdrtansfx Ag Dot The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert – Georg Fischer – Schiffmann and Seidl – Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Kondisi: baru, Tahun pembuatan: 2026, 1 Cgodpfx Ajynz Idjg Det

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 40.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 88 t, lebar bukaan pengisian: 990 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), laju aliran volumetrik: 643 m³/jam, Good day, We hereby offer you, subject to prior sale, a used baler including conveyor belt, wire-tying stations, and bale slide from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Cjdpfx Asymmtcog Degt Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions incl. conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film materials. The baler is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material processing. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH