Beli Anfas bekas (63)

Kondisi: baru, daya: 290 kW (394,29 hp), jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 4x2, jarak roda: 3.900 mm, rem: pengereman mesin, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja, jumlah tempat duduk: 2, panjang ruang muatan: 4.000 mm, lebar ruang muat: 2.420 mm, tinggi ruang muatan: 600 mm, Perlengkapan: ABS, derek, kabin, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, kunci diferensial, kunci sentral, lampu depan tambahan, lampu kabut, pemanas jok,

Kondisi: baru, daya: 350 kW (475,87 hp), jenis bahan bakar: diesel, berat kosong: 16.128 kg, berat muatan maksimum: 9.872 kg, berat keseluruhan: 26.000 kg, konfigurasi gandar: 6x4, jarak roda: 3.900 mm, inspeksi berikutnya (TÜV): 01/2027, rem: pengereman mesin, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja, jumlah tempat duduk: 2, panjang ruang muatan: 4.800 mm, lebar ruang muat: 2.380 mm, tinggi ruang muatan: 800 mm, Perlengkapan: ABS, derek, kabin, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, kunci diferensial, kunci sentral, lampu depan tambahan, lampu kabut, pemanas jok, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 26.000 kg, Tahun pembuatan: 2026, masa garansi: 36 bulan, Perlengkapan: derek, kendali jelajah, kopling trailer, pemanas jok, pemanas parkir,

Kondisi: baru, Model designation Bjdpsk D Nyisfx Anpoww Chamfering system UZ12 ULTRALIGHT

Kondisi: bekas, manual trolley, push trolley, crane cat, cat trolley, crane trolley, crane travel gear, traveling trolley Bjdpfx Ansd N Rt Depoww - Beam width: max. 100 mm - Load capacity: 2,500 kg - Dimensions: 327/200/H270 mm - Weight: 27 kg

Kondisi: baru, Model designation Bwodek Au Dvspfx Anpow Chamfering system B22 ZERO

Kondisi: baru, Diameter -- mm Workpiece length -- mm Bwjdpfx Anok Egrtopew Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width: 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic feed beveling machines available on the market. It is suitable not only for workshops, but also for on-site assembly. The machine features a stepless adjustable working angle system. Thanks to the special design of its drive system, the UZ18 Hardworker is also suitable for processing harder materials. The machine comes equipped with an automatic feed. Working with the UZ18 Hardworker is therefore highly convenient. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Operating range for sheet thickness: 6 – 40 mm * The bevel angle can be easily adjusted steplessly from 15° to 50° without the need for part replacement * Double-sided bevel (X, K) without material handling * Simple connection to a 3D manipulator for easier operation and handling * Quiet operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine can process large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces can be inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm - Steplessly adjustable angle: 15° - 50° - Operating range for sheet thickness: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We also offer an optional (mobile) 3D manipulator for this unit.

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Bedpfxsppgcye Anpsww Angle range 30/45/22.5/37.5/50° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic feed beveling machines on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with automatic feed, making operation of the UZ12 ULTRALIGHT very convenient. * Suitable for conventional steels (up to a tensile strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Sheet thickness working range: 3 – 35 mm * Beveling of pipes from an internal diameter of 95 mm * Variable adjustment of the required bevel angle using interchangeable holder kits for each specific angle * Double-sided bevel (X, K) without handling the material * Quiet operation * Equipped with automatic feed * For stationary or mobile use * The machine can process large workpieces without additional support at a speed of 1.8 m/min * Smaller workpieces can be inserted directly into the machine * Lightweight and compact design, manageable by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable kits) - Sheet thickness range: 3 – 35 mm - Motor: 400 W - Feed speed: 1.8 m/min - Dimensions: 470 x 294 x 523 mm We are pleased to optionally offer you a mobile 3D manipulator for this unit.

Kondisi: baru, Model designation Bwedpfx Ansk Au Drepsw B3 deburring/chamfering machine

Kondisi: baru, en-GB Bsdpfx Anjk Uqhajpjww

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Spindle speeds 2850 rpm Angle range 0 - 60° (steplessly adjustable) Machine weight approx. 19.5 kg Maximum bevel width 20 mm + face side machining Designed for beveling and deburring straight edges, for so-called FACING – removing an unwanted layer of material from the face end of the workpiece, e.g. resulting from oxy-fuel cutting on sheet metal. Specifically developed for visible bevels and weld seam preparation. Powerful electric drive for extreme loads. * High-performance motor * Stepless adjustment of the working angle within the range of 0° - 60° * FACING – edge machining at an angle of 0° for removing undesirable layers after oxy-fuel cutting * Unique mechanical scale for setting the bevel width for higher precision * Very compact and ergonomic design for high productivity * Surrounding protective frame to prevent damage and provide versatile gripping options * With appropriate accessories, pipes from D=150 mm can also be processed Bwsdpfxeppgcve Anpow * Additional adjustable handle - Bevel width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We can optionally offer you a pipe beveling device (D=150mm) for this machine.

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Bodpjppgcrefx Anpjww Spindle speeds 3600 rpm Angle range 30 - 60° (continuously adjustable) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width of 3 mm – Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable processing angle * Suitable for steel, stainless steel, aluminum, and other materials * Precise, heavy-duty, extra-long mechanical guide - Number of indexable inserts: 5 pcs. (four cutting edges) - Feed: manual

Kondisi: baru, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Chamfering System UZ30 EXPRESS Maximum chamfer width 30 mm with automatic feed Bwedpfx Anor I E Exjpow Stationary UZ30 EXPRESS is one of the best solutions for chamfering both large and small batches, as well as smaller workpieces or long, narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be set up to 3.5 m/min. For longer workpieces, the machine can be equipped with an additional infeed and outfeed table, expanding the working surface to an impressive 2,824 mm. - The machine is designed for chamfering steel, aluminium, copper, and other materials such as flat bars, pipes, and welding bevels - High-quality milling ensures mirror-finish surfaces - Feed control via rotary knob - Cutter speed is regulated by frequency inverter - Additional optional accessories available for pipe chamfering - Option to extend the worktable to a total of 2,824 mm - Fast and precise machine adjustment via gauge Technical data: Approximate maximum chamfer widths: at 30° - 30 mm / at 45° - 20 mm / at 60° - 17 mm Adjustable bevel angle: 30° - 60° (stepless) Sheet thickness range: 3 - 100 mm Pipe chamfering: OD 102 mm - OD 156 mm Milling motor power: 4,000 W Milling head speed: Adjustable by frequency inverter Feed rate: 0.6 – 3.5 m/min Weight: 400 kg Dimensions: 825 x 1,200 x 1,615 mm Number of indexable inserts: 5 pieces