Beli Atlas 60 bekas (457)

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7555605, Ukuran maks: 60 x 41 cm, feeder terintegrasi SE - 18.2, pemotong kertas lintas ST - 18.2, unit die cutting D - 18, unit pengikat/pembanding PB - 18.1, pengikatan horizontal dan vertikal. Lebar kertas min. 35 x 45 mm, lebar kertas maks. 405 x 600 mm. Tinggi penumpukan min. 30 mm, tinggi penumpukan maks. 100 mm. No. mesin: 7555605 Gjdpfx Adjxc Uv Astjil

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, jam operasional: 688 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.500 kg, panjang total: 3.000 mm, lebar total: 750 mm, tinggi total: 1.440 mm, daya: 8 kW (10,88 hp), jenis bahan bakar: listrik, tekanan kerja: 32 batang, tekanan (min.): 15 batang, tekanan (maks.): 32 batang, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Ditawarkan untuk dijual kompresor tekanan tinggi ATLAS COPCO sepenuhnya berfungsi, tipe LT7 – 30UV BM, 32 bar, 5,16 kW, dipasang pada rangka logam kokoh (profil C). Dapat juga diatur sebagai kompresor bertekanan rendah mulai dari 15 bar. Pengiriman berdasarkan kesepakatan, pengambilan langsung sangat dianjurkan. Perlengkapan yang termasuk: - Pengering udara Donaldson ultrafilter - Tabung angin Drukov 100 liter - Filter SPX - Sistem pembuangan kondensat - Panel distribusi listrik - Dokumentasi lengkap Kondisi dan perawatan: - 688 jam kerja - Servis profesional dari ATLAS COPCO tahun 2024 - Setelah servis hanya dilakukan pengujian kontrol - Kondisi sepenuhnya berfungsi, tampak seperti baru Giodpfxex Stg Io Adtol Spesifikasi teknis: - Koneksi: 400 V / steker 32 A - Dimensi unit: sekitar 3000 × 750 × 1400 mm (p × l × t) Harga asli: €21.860 belum termasuk PPN Harga: €5.900 belum termasuk PPN (Informasi lebih lanjut dan foto atas permintaan)

Kondisi: bekas, warna: merah, Tahun pembuatan: 1981, jam operasional: 4.391 h, Kompresor udara    • Tekanan kerja: 11 bar    • 4391 jam Gjdpfxsx S Nxao Adtoil    • Lampu jalan    • Berfungsi sepenuhnya Kondisi: Bekas Tahun pembuatan: 1981

Kondisi: bekas, jarak tempuh: 1 km, konfigurasi gandar: 4x4, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2013, Sortiergreifer / Sorting Gripper, Atlas Copco MG 1500, MS20 mount, Year of Manufacture: 2013, Length: 2200 mm, Width: 1000 mm, Height: 1600 mm, Weight: 1480 kg, Operating Pressure: 350 Bar, Spreading Width: 2100 mm, Oil Flow open/close: 120 l/min - 170 l/min, Carrier Machine: 17-28 t, good condition Please contact Emal Jaweed for further information. Miscellaneous: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialist for transport & worldwide shipping. * No liability for typographical and printing errors. * Subject to prior sale and errors. * Trade-ins possible! * Only the General Terms and Conditions (GTC) of Jaweed GmbH apply for vehicle or used machinery sales. * Further information and our GTC can be found on our website. Gjdpfx Asx R T Tledtsil

Kondisi: baik (bekas), Tahun pembuatan: 2013, Atlas Copco Compressor used Model: GG-90-VSD Power: 62 kW Year of manufacture: 2013 Inspection only by prior telephone appointment! Preferred sale to dealers, commercial businesses, or for export. Gedpjtu Uhmsfx Adtjil All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors. We will, of course, handle all formalities for you. Loading possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 60.649 h, Fungsionalitas: berfungsi sepenuhnya, Kompresor sekrup bebas oli Atlas Copco ZT90VSDFF. Inverter dan pengering drum terintegrasi. 90 kW dengan 8,75 bar dan 15,50 m3/menit. Elemen tekanan tinggi diganti pada tahun 2013. Giedpex Nm Itefx Adtjl

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: API628950, translated_001 Gisdpfoxx Snbsx Adtsl

Kondisi: baik (bekas), Blumer Atlas D-18 M Mesin Punch Label Mesin profesional buatan Swiss. Kondisi sempurna, seperti baru. Blumer adalah pemimpin dalam industri punch label. 100% fungsional dan siap untuk produksi. Ini adalah model yang saat ini masih diproduksi. Spesifikasi teknis: Format maksimum: 150x180 mm Format minimum: 24x45 mm Siklus: 18-6/menit Tinggi tumpukan: 120 mm Berat: 600 kg Giodpfsx Hqmnsx Adtel Mesin dilengkapi dengan unit aksi cepat hidrolik. Ekor pada bagian keluar. Modul pemposisian cetakan, pisau pemotong limbah, dan cetakan.

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, en-GB Gisdpfxsx Iukgo Adtol

Kondisi: bekas, jarak tempuh: 1 km, daya: 242 kW (329,03 hp), konfigurasi gandar: 4x4, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2012, Gross vehicle weight: 24,000 kg Please contact Emal Jaweed for further information. Atlas Copco SmartRoc C50-10SF, Year of construction: 2012, Operating hours: 14,261, kW / HP: 242 / 329, Weight: 30,000 kg, Borehole diameter: 90–140 mm, Maximum drilling depth: 36 m, Air volume (FAD) at 12 bar: 223 l/s (approx. 472 cfm), Drilling method: COPROD technology—combines top hammer with down-the-hole features, Drill meter-controlled control systems, GPS/hole navigation systems (HNS) for guided drilling, Dust collector, Automatic rod changer, Good condition, Air conditioning, Auxiliary heater, Central lubrication, Radio, Video available Additional information: * We are offering more than 200 units for sale. Gsdpfxox R T N Ho Adtsil * Our location is 30 km north of Frankfurt/Main Airport. * Financing & Leasing possible. * Specialist for worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-in possible! * Only the terms and conditions of Jaweed GmbH apply to vehicle and used machine sales. * For further information and our general terms and conditions (AGB), please visit our website. We sell our goods exclusively according to our GTC (listed: ... / AGB).

Kondisi: seperti baru (mesin pameran), daya: 129 kW (175,39 hp), jenis bahan bakar: diesel, warna: merah, Tahun pembuatan: 2023, jam operasional: 18 h, Perlengkapan: pendingin udara, de-001 Gisdpsx I U Tbsfx Adtel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 17.555 h, Fungsionalitas: berfungsi sepenuhnya, Kompresor sekrup Atlas Copco GA110VSD. 110 kW dengan tekanan 8,5 bar dan debit 21,60 m3/menit. Inverter terintegrasi. Gjdpfx Aex Iu H Usdtjil

Kondisi: hampir baru (bekas), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Device XENOTEST BETA+ – Material Testing / Weathering Test Device with Humidification and Spray System Giedpfew Thykex Adtol For sale is a professional XENOTEST BETA+ weathering tester manufactured by ATLAS Material Testing Technology GmbH. This unit is used to simulate sunlight as well as weather and climate influences, and is utilized worldwide in research, quality control, and material testing applications. Features: - Professional device for UV and weather resistance testing - Ideally suited for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Equipment: - Weathering and lightfastness tester equipped with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spray system (ultrasonic humidifier, spray bars) - Measurement system with XENOSENSIV sensor for irradiance and black standard temperature monitoring - Integrated touch display for operation and programming - Pre-programmed standard tests (e.g. ISO 11341, ISO 4892-2, ISO 105-B02/B06) as well as freely definable test programs - Integrated printer for documentation (paper roll) - Water reservoir (approx. 40 liters for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information provided without guarantee!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Tipe mesin: Kompresor udara tanpa minyak • Nama produk: ZH 7000-6 • Tanda CE: Ya Produsen • Produsen: Atlas Copco • Negara produksi (sesuai pelat tipe): Belgia Identifikasi • Tipe: ZH7000-6-7 • Nomor seri: AIF124949 • Tahun pembuatan: 2007 Gijdpfx Adex Iudtetel Data teknis (pelat tipe) • Tekanan operasi maksimum: 7,7 bar(e) 112 psig • Daya masuk: 620 kW 831 HP • Kecepatan poros: 2.980 rpm Kontrol dan Pengoperasian • Sistem kontrol: Elektronikon® • Layar terintegrasi dengan keypad membran • Tombol penghenti darurat di panel depan

Kondisi: bekas, daya: 74 kW (100,61 hp), Tahun pembuatan: 2011, jam operasional: 3.926 h, Empty weight: 8,350 kg Contact Emal Jaweed for further information. Wheel loader, Atlas, Model: 95, Year: 2011, Operating hours: 3,928, Length: 6,300 mm, Width: 2,200 mm, Height: 2,950 mm, kW / HP: 74.9 / 102, Engine type: TCD 2012, 4x4, Weight: 7,750 kg, Permissible total weight: 8,350 kg, Air conditioning, digital display, windshield wiper Giodpfx Aex R T Ntedtjl Miscellaneous: * We are offering over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialist in worldwide transport & shipping. * No liability for printing & typographical errors. * Subject to error and prior sale. * Trade-in possible! * The general terms and conditions of Jaweed GmbH apply exclusively to the purchase of vehicles/used machinery. * For more information as well as our general terms and conditions, please visit our website. We are selling our goods according to our general terms and conditions (listed: ... / AGB).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 35.741 h, Fungsionalitas: berfungsi sepenuhnya, Kompresor sekrup Atlas Copco GA15VSDFF. Pengering dan inverter terintegrasi. 15 kW, 13 bar, 2,91 m3/menit. Gijdpjx Igzkofx Adtol

Kondisi: hampir baru (bekas), Here we offer you a weathering test instrument. The Xenotest Beta+ is a high-quality xenon weathering tester featuring a rotating sample carousel and an exposure area of 4000 cm². It offers comprehensive parameter control capabilities. Irradiance and temperature are measured and regulated directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger sample quantities or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - Testing with high irradiance levels up to 120 W/m² (2 suns) - Touchscreen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300–400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Diagnostic message display - Storage for 10 custom test methods Giodpfx Aeihfrrjdtjl - Pre-programmed international standard test methods - Multilingual user interface - Aging-resistant XENOCHROME filters for outdoor daylight and indoor daylight (behind window) simulation - On-rack XENOSENSIV 300–400 nm for measurement and regulation of irradiance (in W/m²) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or dual control: chamber air temperature and black standard temperature (up to 130 °C) - Fan-controlled temperature differential between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60-liter water reservoir - Outer cylinder made of special UV glass - Automatic shut-off by irradiance dosage, exposure time, or total operating hours - Extended autostart features - Data output via memory card or RS232 interface - Ethernet port for connecting to internal computer network and using XenoTouch Add-Ons 1, 2, and 3 (remote control, email service, online monitoring) Dimensions: Width x Depth x Height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We are happy to answer any further questions you may have by phone.

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, • Jenis mesin: Kompresor udara bebas oli • Nama produk: ZR 500 VSD • Tanda CE: Ya (CE 0038) Pabrikan • Produsen: Atlas Copco • Tempat manufaktur (sesuai plat tipe): Diproduksi di Belgia Identifikasi • Tipe: ZR 500 VSD • Nomor seri: AIF118346 • Tahun pembuatan: 2007 Data teknis (sesuai plat tipe) • Tekanan operasi maksimum: 8,60 bar(e) Gedpfx Adjx Iuc Aotsil • Daya masuk: 497 kW • Kecepatan poros: 2.180 rpm Kontrol dan pengoperasian • Sistem kontrol: Elektronikon® (sesuai panel kontrol) • Layar terintegrasi dengan keypad membran • Tombol penghenti darurat di panel depan

Tahun pembuatan: 1995, jam operasional: 1 h, Kondisi: bekas, abbruchgreifer-peiner-sb950-1995 Gijdox R T Hlspfx Adtol

Kondisi: baik (bekas), Atlas Type: Xenotest Alpha LM High Energy Gedpsuuaryofx Adteil Weathering Test Device The Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weather resistance of materials under standard, high-temperature, and high-performance conditions. - XENOCHROME filter - XENOSENSIV gearbox - Lamp power control in W/m² - Sample chamber temperature regulated up to 70°C - Measurement sensors at sample level: XENOSENSIV E (300–400 nm) and SST - Stationary sensor for sample chamber temperature and relative humidity - Humidification - Spraying - Water supply with integrated tank - Electronic specification: 230V, 50/60Hz Absorption filter 7 IR: Constant mode 40–140 W/m², Carousel mode 21–72 W/m² Glass filter 10 FG: Constant mode 40–110 W/m², Carousel mode 21–57 W/m² Absorption filter 4 IR + 3 glass: Constant mode 40–140 W/m², Carousel mode 21–72 W/m² Absorption filter 6 IR + 1 UV: Constant mode 40–140 W/m², Carousel mode 21–72 W/m² Relative electrical output without XENOSENSIV sensor: continuously regulated to set value, 53–120% Sample chamber temperature: 20–70°C (depending on selected filter configuration) Black standard temperature: Constant mode 25–130°C, Carousel mode 25–100°C Relative humidity: 10%–95% Fan speed: 500–2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data; all information is non-binding!) We will be happy to answer further questions by phone.

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, en20240617-01-TechSpec-FD2400VSD Godpfjx Iub Eex Adtjil

Kondisi: bekas, jarak tempuh: 1 km, daya: 1 kW (1,36 hp), konfigurasi gandar: 4x2, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2005, zGG: 1,000 kg Contact Emal Jaweed for further information. Compressor, Comp-Air, C110-9, Year of construction: 2005, Weight: 2,200 kg, Power: 93 kW, Operating hours: 1,353, Length: 4,550 mm, Width: 1,800 mm, Height: 1,750 mm, Volume: 11.3 liters (m³), Working pressure: 8.6 bar, 4-cylinder Deutz engine, Video available, good condition. Gisdpfx Aex R Tyfsdtsl Other details: * We offer more than 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-in possible! * Only the general terms and conditions (GTC) of Jaweed GmbH apply for vehicle purchases/used machine sales. * Further information and our GTC can be found on our website. We sell our goods according to our general terms and conditions (listed on our website as “AGB”).

Kondisi: sangat baik (bekas), Atlas Type: CI3000+ Ci3000+ Weather-Ometer / Fade-Ometer Model: CI3000W Year of Manufacture: 06/2022 Operating Hours: Device 816.5 h Lamp Operating Hours: Device 647.4 h Total Radiator Operation: 88.9 h Atlas CI3000+ Xenon Weather-Ometer with Calibration Case The Ci3000+ Weather-Ometer and Fade-Ometer, equipped with state-of-the-art digital control systems, represent significant advancements in the application of digital and optical technologies for easy-to-use laboratory weathering instruments. The 3000 series is approved by numerous OEMs in the textile, paint & coatings, and plastics industries as an exclusive platform for precise, reproducible, and repeatable lifetime prediction results. The 3000 series is certified to CE, UL, CSA, ISO, and EN standards. Key features of this device include: a rotating specimen rack to maximize sample uniformity; custom nozzles for homogeneous front and back specimen spraying; ASTM black panel thermometer or ISO/DIN black standard thermometer for controlling and monitoring specimen-level temperature, ensuring test repeatability. 4500 W water-cooled xenon lamp Giedpfx Ajtq Em Esdtsl Total exposure area 2,188 cm² (339 in²) 12-inch TFT full-color touchscreen control panel – display of all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of chamber air temperature Display of diagnostic messages 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Features: Climate Type Test Method: Sunlight Simulation Xenon Arc Lamp Light Source Applications: Additives and Dyes Adhesives and Sealants Architecture and Construction Automotive Industry Food and Beverage Graphics Packaging Paints and Coatings Photovoltaics Plastics Textiles Wind and Solar Consumer Electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of delivery: (See photo) (Subject to change and errors in technical data, information is without guarantee!) For further questions, please contact us by phone.

Kondisi: sangat baik (bekas), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and Fade-Ometer, with their advanced digital control systems, represent monumental achievements in the application of digital and optical technologies to user-friendly laboratory weathering equipment. The Series 3000 is approved by many OEMs in the textile, paint, and coatings industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: - Climate type - Test method: Sunlight simulation - Light source: Xenon arc lamp Applications: - Additives and dyes - Adhesives and sealants - Architecture and construction - Automotive industry - Food and beverages - Graphics - Packaging - Paints and coatings - Photovoltaics - Plastics - Textiles - Wind and solar - Consumer electronics - Compressed air supply The CI3000’s humidification system operates with a compressed air ultrasonic spray nozzle. Before entering the unit, the compressed air must be passed through a water/oil separator. The small air regulator in the CI3000 contains a secondary water-oil filter and a 5-micron particulate filter. Ensure a separate oil-water separator is installed and do not rely solely on the air regulator’s filter, as this is intended only as an auxiliary device. Compressed Air Specifications: - Pressure: 80-100 PSI (552-689 kPa) - Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000: - 37.5" width x 29" depth x 72" height - (95 cm width x 73 cm depth x 183 cm height) Required footprint: Godpfx Adeucd Rbjteil - 41.5" width x 80" depth - (105 cm width x 203 cm depth) Total weight: 404 kg Voltage: 380-220 V, 38 A, 50 Hz 3/N/PE, 8 kW 404 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors in technical data and information!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA is a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV drive system Control of lamp output in W/m² XENOCHROME 320 35–100 W/m² Gjdpfjg Dglysx Adtsil Sample chamber temperature regulated up to 80°C Measurement sensor at sample level XENOSENSIV E(300–400 nm) Humidity / spraying function Water supply with integrated tank Sample chamber temperature: ambient – 80°C Black standard temperature: surface – 130°C Relative humidity: 10% – 95% Electronic configuration: 3/N/PE AC 400V ±10% 50–60Hz Power connection: 32A Power consumption: approx. 12kVA Nominal output of xenon lamp: 2200VA Output of xenon lamp: 2800VA Nominal current: 16A Maximum lamp current: 20A Dimensions: width 900 mm x depth 1200 mm x height 1800 mm Maximum sample area: 4000 cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data and specifications!) Further questions can gladly be answered by phone.