Beli Bagian Mesin Pembersih bekas (77.627)

Kondisi: bekas, Tahun pembuatan: 1995, Overview This bottle washing machine was manufactured in 1995 by Swiss producer PAC. The machine has been removed from production and can be inspected in person at our warehouse. Technical Details Capacity: 6,000 bottles/hour Min/Max: 3,000 bottles/h - 6,300 bottles/h Bottle types: 0.5L, Euro, NRW, incl. change parts for 330ml Vichy bottles Bottles per row: 12 Bottles inside the machine: 1,080 Bottle cell carriers: 96 Dimensions: Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3.6 m³/h Heat consumption at 80°C: 480 kJ/h x 1000 Electrical consumption: 11 kW Includes spare parts: Motors for front and rear drive Bottle cell carriers Wear parts Machine body entirely made of stainless steel All hot zones with 5 cm insulation Dodpfx Agevl Huao Decg Belt for label removal Stainless steel heat exchanger for low-pressure steam 116°C-120°C at 0.7 – 1 bar Self-cleaning stainless steel spray pipes

Kondisi: baru, Tahun pembuatan: 2026, Properties and Application The body and movable jaw are made of high-quality cast iron Interchangeable, serrated jaw inserts are induction-hardened and ground The use of a thrust bearing increases the efficiency of the clamping mechanism Designed for securing long workpieces utilizing the full length of the machine tool table Dodevxgq Uepfx Ag Decg Equipment included: crank handle, positioning keys

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The workshop parts washer is a versatile tool that should be included in every service centre, garage, or workshop. This indispensable device enables fast and cost-effective removal of contaminants. A major advantage is the possibility of operating the washer indoors. The enclosed parts washer ensures the effective removal of all types of contamination, from oils to hard-to-reach deposits, while guaranteeing safety and long-term component performance. The technology used ensures not only cleanliness but also protection against corrosion. Please note that cleaning results will depend on the detergents used. The parts washer is designed to hold up to 60 litres of cleaning fluid, with a maximum tank capacity of 80 litres. For maximum efficiency, the pump inlet should be covered during operation. The pump operates at a flow rate of 10 to 12 litres per minute, allowing thorough cleaning of surfaces, including those with fine cracks, thanks to the powerful jet. The fluid is circulated from the bottom by the pump in a closed-loop system and delivered under pressure via a flexible hose. The workshop washer features four legs for stable operation and an optimised working height. The lid locks automatically when opened. The unit also includes a worktop located below the basin, which can be used to place washing accessories or cleaned parts for drying. Dedpfxsvugvve Ag Dscg The device requires self-assembly. Technical specifications: - Tank capacity: 80 L - Maximum pump capacity: 10-12 L/min - Power supply: 230 V - Dimensions: 775 x 540 x 915 mm - Internal dimensions: 710 x 480 x 260 mm - Shelf below basin: 700 x 420 mm - Power supply: 230 V - Weight: 23 kg Price does not apply to machines purchased in Poland.

Kondisi: baru, Tahun pembuatan: 2026, Properties and Application - The body and movable jaw are made from high-quality cast iron - Interchangeable, serrated jaw inserts, induction hardened and ground - The use of a thrust bearing increases the efficiency of the clamping mechanism - Designed for clamping long workpieces utilizing the full length of the machine table Dodpfx Ajvxgp Djg Docg - Equipment includes: handle, locating keys - Bolt spacing range: 135 - 180 mm, channel width: 18 mm.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Mesin Porsi Vemag Model MMP220 Tahun 2012 Dcedpsym Uc Sofx Ag Dsg 400-460 V, 3 Ph, 50/60 Hz, 3,5 A, 1,5 kW, 6 bar, berat: 335 kg Lebar kerja: 260 mm, sabuk plastik, lebar sabuk: (2x) 250 mm Dimensi: 1760 mm x 600 mm x 1550 mm Dalam kondisi sangat baik

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Parts Cleaning Machine – Spray Cleaning System Type L90 Fully automatic hot water parts washing machine with basket drive via geared motor, stainless steel wash pump (manufacturer: Lowara), perimeter 3-sided spray system with stainless steel nozzles. - Basket diameter: 780 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar (stainless steel pump) - Tank volume: 105 liters - Heating: electrically adjustable (ambient – 90°C) Dcedpfxjd H Slcj Ag Dsg - System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm - Empty weight: approx. 220 kg - Freely adjustable wash timer (minutes and hours) Complete cleaning machine (internal components and external casing) made from stainless steel 1.4301 (AISI 304) - Water circulation system and loading basket in stainless steel 1.4301 - Complete system insulation (tank and cabin) made from stainless steel 1.4301 - Mechanical lid lock - Bath cover with fine filter (2,000 micron) - Suction filter to protect the pump - Operating hours counter - Steam extraction incl. condensate return - Oil skimmer for bath maintenance Parts washer is as-new (test system/technical system) OTHER BASKET SIZES AVAILABLE ON REQUEST!!!

Kondisi: diremajakan ulang (bekas), es-001 Dedpfxsymarfo Ag Docg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Instalasi pembersihan ultrasonik, mesin cuci ultrasonik termasuk lift barang pneumatik otomatis; berat pemuatan maks.: 250 kg Dimensi kerja: platform: 1.300x600 mm, tinggi kerja: 400 mm Transduser celup ultrasonik dipasang sebagai suara dasar Daya: 5.000 Watt efektif / 10.000 Watt puncak - Frekuensi: 25 kHz Termasuk pembilasan permukaan/pemisah minyak untuk perawatan cairan pembersih Dimensi luar unit, sekitar: P 2.130 x L 1.170 x T 1.780 mm Kontrol: Siemens Logo Daya terpasang, listrik: 17 kW Dedpfx Aoyiy Hhjg Dscg

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, MA HKA Mesin Penempel Tepi Manual dalam kondisi berfungsi penuh. Mesin pelapis tepi untuk komponen berbentuk. Berbagai selang udara bertekanan baru saja diganti sepenuhnya. Ketebalan tepi: 0,4 - 3 mm Ketebalan panel: 16 - 45 mm Lebar strip: 20 - 50 mm Daya terpasang: 2,6 kW Radius luar minimum: Tergantung pada kemampuan pelengkungan material tepi Radius dalam minimum: 150 mm, tergantung karakteristik material Termasuk lengan derek dan penarik pegas Meja vakum dengan 4 zona dapat diaktifkan Djdpfxex H Un As Ag Docg Rol, bantalan vakum (termasuk set karet baru tambahan) untuk meja vakum #C1

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, translation Djdpfx Agjg Ipp Ae Djcg

Kondisi: sangat baik (bekas), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Basic unit constructed from stainless steel - Environmentally friendly Concept With the Rosink Front Loader RFL, we offer you an economical and user-friendly solution – especially suitable for cleaning tall components. The proven Rosink cleaning technology and highest quality are combined in a single system. A 1-bath system forms the basis, featuring a rotary table as standard, which can be extended to a multi-bath system as required. Depending on equipment and requirements, various programs such as washing, rinsing, drying, etc., can be run within the washing chamber. Equipment Base unit in stainless steel grade 1.4301 Tank with sloped bottom Tanks and wash chamber including cladding and insulation Rotary drive with 4-point bearing Pneumatic lift door, operated with 2-hand safety control Transport trolley or loading table with collection tray, all in stainless steel 1.4301 Pre-filtration with return flow filter baskets; usable height Selectable filter insert: 200 μm or 500 μm Front control panel with PLC controller (stores up to 5 programs) Flat jet nozzle system entirely in stainless steel 1.4301 Automatic filling unit with bath level control Maintenance and inspection ports for the wash and rinse tanks Technical Data RFL 1650, variable depending on configuration Width: 2900 mm Height closed/open: 2800/4500 mm Dedpfsx Exuqjx Ag Docg Depth without/with transport trolley: 2650/4500 mm Grid capacity: 1000 kg Grid dimensions: 1320 x 1320 mm Grid diagonal: 1650 mm Connection voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V/DC Detergent tank volume (wash): 750 l Detergent tank volume (rinse): 500 l Pump performance (washing): 7.5 kW, 630 l/min at 4.5 bar Pump performance (rinsing): 4 kW, 250 l/min at 5.5 bar Drying: 12 kW Heating capacity (cleaner): 36 kW Heating capacity (rinse): 27 kW Weight: 3600 kg Financing through our partner bank is possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! International shipping costs on request!

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), de-schablonenreiniger-gms-leiterplattenindustrie Dcjdsxd Awdepfx Ag Dsg

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), de_flaschenreinigungsanlage_gm_gera Dodpfxoxfbczj Ag Djcg

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), de-001 Dcsdpjxwcvgofx Ag Dsg

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), WB_Busser_01 Dedpfoxa Ekxox Ag Decg

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Tank capacity: 775 l, max. batch weight: 100 kg, heating power: 26 kW, max. temperature: 75°C, basket dimensions (X/Y/Z): 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions (X/Y/Z): approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Includes basket rotation with swivel drive, automatic water filling, and oil separation with a coalescence separator unit and oil collection container. Documentation available. An on-site inspection is possible. Dcodpfx Aewr Dxhsg Dog

Kondisi: baik (bekas), Kepala pembagi, perangkat frais spiral, alat pembagi, penahan alat untuk penggerindaan, mesin gerinda bor, mesin gerinda pisau frais, penahan bor untuk penggerindaan Dedpsxfhchjfx Ag Djcg - Produsen: Stankoimport, kepala pembagi/penahan alat untuk mesin pengasah alat - Tipe: 36642.M1 - Kepala pembagi: dapat diputar/dimiringkan - Dudukan/ukuran: MK5 lihat foto - Dimensi: 300/270/T180 mm - Berat: 21,6 kg

Tahun pembuatan: 2023, jam operasional: 1 h, Kondisi: baru, nomor mesin/kendaraan: MANUWASH3128, de Dcodpfod Tg Nnjx Ag Djg

Tahun pembuatan: 2023, Kondisi: baru, de-DE Dcedpfx Agjd Iz Dne Djg

Tahun pembuatan: 2023, Kondisi: baru, INTERSONIK MINISONIK-Serie bietet schnelle, zuverlässige und wirtschaftliche Lösungen für die Teilereinigung! Perfekte Waschanlagen für das Entfetten und die präzise Reinigung von Bauteilen Funktionsprinzip: Durch Hochfrequenz (25 kHz), die in der Flüssigkeit erzeugt wird, entstehen Millionen mikroskopischer Luftblasen mit Unterdruckenergie. Diese treffen auf die verschmutzten Oberflächen, platzen und entfernen dadurch Öl, Späne, Kohlenstoff, Kalk sowie Blut- und Gewebereste. Minisonik Ultraschallreiniger sind in vier verschiedenen Größen erhältlich: 4l, 12l, 18l und 28l. Alle Minisonik-Modelle sind sofort lieferbar. Minisonik-Standards: - Komplett aus Edelstahl gefertigt - Zeitschaltuhr mechanisch oder digital [optional] - Betriebstemperatur geregelt durch mechanischen oder digitalen Thermostat [optional] Anwendungsbereiche: ► Reinigung von Automobilersatzteilen wie Injektorelementen, Pumpenelementen, Zündkerzen etc. ► In Krankenhäusern, Kliniken, Laboren, für medizinische Materialien und chirurgische Instrumente ► Zahnarztinstrumente ► Schmuckwaren ► Elektronische Komponenten und Leiterplatten (PCB) ► Textilindustrieausrüstungen Bitte entnehmen Sie die technischen Daten dem beigefügten Dokument. Ultraschallreiniger, 18-Liter-Ultraschallreiniger, 12-Liter-Ultraschallreiniger, 4-Liter-Ultraschallreiniger, 28-Liter-Ultraschallreiniger, Tisch-Ultraschallreiniger, Labor-Ultraschallreiniger Dsdpod I Dnvjfx Ag Docg Für weitere Informationen stehen wir Ihnen gerne zur Verfügung.

Tahun pembuatan: 2023, Kondisi: baru, Die INTERSONIK MIDISONIK Serie bietet eine schnelle, zuverlässige und wirtschaftliche Lösung für die Teile-Reinigung! Intersonik Ultraschallreiniger sind ideale Systeme zum Entfetten und zur präzisen Reinigung von Bauteilen. Funktionsprinzip: Eine Hochfrequenz (25 kHz), die in Flüssigkeit erzeugt wird, erzeugt Millionen mikroskopisch kleiner Luftblasen, die mit Vakuumenergie beladen sind. Diese treffen auf die verschmutzten Oberflächen, implodieren und entfernen so Öl, Späne, Kohlenstoff, Kalk oder Blutreste zuverlässig. Die MIDISONIK Ultraschallreiniger sind in vier verschiedenen Größen erhältlich: 40 l, 50 l, 60 l und 80 Liter. Standards bei Midisonik: Dcodpfjd I Dpdox Ag Deg - Komplett aus Edelstahl gefertigt - Timer wahlweise mechanisch oder digital - Betriebstemperatur über mechanischen oder digitalen Thermostat (optional) geregelt Anwendungsbereiche: ► Reinigung von Kfz-Ersatzteilen wie Injektoren, Pumpenelementen, Zündkerzen etc. ► Einsatz in Krankenhäusern, Kliniken, Laboren sowie bei medizinischen Materialien und chirurgischen Instrumenten ► Reinigung von dentistischen Instrumenten ► Schmuckindustrie ► Elektronische Bauteile und Leiterplatten (PCB) ► Ausrüstungen der Textilindustrie Bitte entnehmen Sie die technischen Daten dem beigefügten Dokument. Ultraschallreiniger, Ultraschall-Waschanlage, 40 Liter Ultraschallreiniger, 50 Liter Ultraschallreiniger, 60 Liter Ultraschallreiniger, 80 Liter Ultraschallreiniger, Ultraschallreiniger für Kfz-Teile, Ultraschall-Entfetter Kontaktieren Sie uns gerne für weitere Informationen.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Scrubber-dryer, floor cleaning machine, sweeper - Scrubber-dryer with traction drive - Working width: 850 mm - Practical area performance: 2,860 m²/h Dodpeb A Hg Eefx Ag Dscg - Battery charger included - With traction drive - Special suction foot guarantees maximum vacuum performance at low operating costs.

Kondisi: sangat baik (bekas), SCM Contura in excellent condition Dcodpfjt E T I Njx Ag Djg

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20250107, panjang total: 2.000 mm, lebar total: 1.900 mm, tinggi total: 3.050 mm, berat keseluruhan: 1.000 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, kapasitas pemanasan: 24 kW (32,63 hp), masa garansi: 12 bulan, berat muatan maksimum: 700 kg, berat benda kerja (maks.): 700 kg, diameter sangkar: 1.390 mm, Single-stage cleaning machine Dedpfx Aovvuzceg Dscg Operating principle, machine with lift door The cleaning machine’s tank is filled manually with tap water (optionally via the automatic refill valve AR-2) and is heated by heating elements and thermostat settings. The time settings for the phases—washing, dripping (optionally drying and steam extraction)—are adjusted via the "PROCESS TIMER." Parts are placed on the loading grid or loading trolley and pushed into the cleaning chamber. For heavy loads, a conveyor belt (MIU / AIU) can optionally be installed to transport the items into the cleaning cabin. The lift door is closed, the machine started, and the wash pump delivers the cleaning solution onto the objects to be cleaned via the rotating spray systems. The rotation of the upper and lower spray arms is powered by the reaction force of the jet nozzle located at one end of the spray arm. The rotational speed can be adjusted using a screw in the reaction nozzle. Optionally, the rotation of the upper spray arm can be motorized and the spray arms can be fitted with nozzles. After the wash cycle, a brief dripping phase follows, during which the used cleaning solution is returned through filter baskets to the wash tank. Optionally, the fluid from the wash stage can be filtered using a filter unit (EFG-6 or PP197). An additional stage, such as pre-washing or rinsing, is optionally possible via stationary spray pipes NS-2 / NS-TEMP. In this case, parts are rinsed with fresh water (cold or heated), which flows into the drain through the drain valve. After the cleaning process, the parts can optionally be dried using a drying unit. When the cleaning process is complete, the lift door is left ajar for steam extraction. The steam from the cleaning cabin is either extracted using the steam extractor (DF-250S) or can be condensed and returned to the tank using the steam condenser (FX6002). Both accessories are optional and are not part of the machine’s standard equipment. Once the steam extraction time has elapsed, the lift door opens fully and the cleaning cycle is complete. Optionally, the lift door can be equipped with a safety edge, which automatically stops the door if an object is detected in the doorway. The cleaned components can be removed from the cleaning chamber onto a loading surface or loading trolley.

Tahun pembuatan: 2017, Kondisi: bekas,