Beli Benang Cutter Pemegang bekas (3.645)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Cedpodqzcxjfx Aagoha

Kondisi: baru, Tahun pembuatan: 2025, Spindle moulder type: minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment cost Article No.: 5502045 Brand: Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Net weight approx.: 290 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1000 mm Sliding table length: 1000 mm Work table width: 435 mm Sliding table width: 270 mm Table height: 900 mm Installation Information Space requirement (length): 1945 mm Machine body width/depth: 710 mm Space requirement (width/depth): 2220 mm Working area (length): 1600 mm Explanation of space requirement: Maximum travel range or effective lengths are considered in these dimensions. Working area (width/depth): 1600 mm Machine body length: 1000 mm Explanation of working area: Add the working area dimensions to the space requirement to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Main drive motor power: 5.0 kW Mains frequency: 50 Hz Spindle Spindle tilt: 0 to -45° Spindle speeds: 3500/7000/10000 rpm Usable spindle length: 100 mm Spindle shaft diameter: 30 mm Maximum spindle projection above table: 130 mm Maximum Cutter Diameters Maximum tool diameter (retractable): 180 mm Maximum tenoning cutter diameter: 275 mm Maximum profile cutter diameter: 210 mm Chjdpfx Aaohp Rcysgsa INCLUDED ACCESSORIES Curved workpiece guard Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Kondisi: baru, Tahun pembuatan: 2026, en_Holzkraft_Minimax_ST_5es Codpfx Asd Hx Hmjageha

Kondisi: baru, Tahun pembuatan: 2026, en Chodpfx Aaocbtpkegea

Kondisi: baik (bekas), Penawaran terdiri dari: Polar 92X, tahun pembuatan 2005, sekitar 700.000 potongan, termasuk pisau pengganti, meja cor samping, pemeriksaan dan demonstrasi dapat dilakukan, tersedia segera. Cedpozkwtmefx Aageha

Kondisi: bekas, Used machine Features and Technical Data: Codpfszk N Tlox Aagjha Versatile copy router with extremely short setup times, both when switching from manual operations to automatic operations and when changing between various automatic machining processes. The automatic template feed (consisting of a central tracing roller and a pressure roller) was developed by SCM to automatically guide workpieces fastened to a template past the milling tool. The automatic tracing roller and pressure roller can be removed within seconds, freeing the machine for custom and single-piece hand operations. Distance between tool axis and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table size with extensions: 1510 x 1170 mm Motor power: 4 kW Template feed motor power: 0.14 kW Template feed speed: 1.5–12 m/min Number of adjustable turret depth stops: 6 Dimensions approx.: 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 1995, Used machine Year of manufacture: 1995 Chsdjzk N Nyepfx Aagja Features and technical data: Versatile copy router with extremely short setup times, both when switching from manual operations to automatic processes as well as when changing between different automatic machining operations. The automatic template feed (consisting of a central copy roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the milling tool. The automatic copying roller and pressure roller can be removed in seconds, making the machine ready for single-piece and custom manual production. Distance between tool axis and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000 / 20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Motor power for template feed: 0.14 kW Template feed speed: 1.5 – 12 m/min Number of adjustable turret depth stops: 6 Dimensions (approx.): 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short notice Location: 63934 Röllbach

Kondisi: sangat baik (bekas), Mesin Pengasah Alat AUTOOL Model VS300 Chedjxfk T Aopfx Aagja

Kondisi: hampir baru (bekas), Tool grinding machine GRIFO model U10 Chedpfeinbilex Aagja

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: AGG0055 - Kondisi: Bekas - Fungsionalitas: Belum diuji - Jika berminat, kami menawarkan layanan peremajaan, silakan hubungi kami. Berat dan dimensi untuk transportasi: 7KG, 36x26x21 CM. Chedpfx Asvu An Ieagja

Kondisi: bekas, Tahun pembuatan: 2006, Offer in progress! Chodpfx Aaswftufegea

Kondisi: bekas, Tahun pembuatan: 1982, en-GB-01 Chjdpot Hwr Ujfx Aagoa

Kondisi: bekas, Tahun pembuatan: 1991, Workpiece diameter 30 mm Thread length 110 mm Cedpfx Aaet Hwzcegeha Thread pitch 0.5-2.75 mm/rev Total power requirement 4.5 kW Machine weight approx. 1.7 t Space requirement approx. m M O N N I E R & ZAHNER Switzerland Thread whirling machine with workpiece loading system Type MZ 600, year of manufacture approx. 1991, #3591 _____ Max. workpiece diameter approx. 30 mm Max. workpiece length approx. 110 mm Axial milling length approx. 100 mm Module in steel approx. 1 Worm starts 1 Axis distance tool-workpiece min./max. 0 - 70 mm Whirling head swiveling +/- 12° Tool size approx. 70 x 16 mm Whirling head speeds approx. 1,000 - 6,000 rpm Pitch range approx. 0.5 - 2.75 mm/rev Whirling head drive approx. 1.5 kW Total drive approx. 4.5 kW - 220 V/380 V / 50 Hz Weight approx. 1,700 kg Accessories / Special Equipment: Machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a vibratory bowl feeder from Rübenach with pneumatic swing gripper for inserting the blanks, as well as a tailstock (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew while the cross slide sets the thread depth. Copying unit at the end of the cross slide with template holder for tapered screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electrical program control with display of movement sequence. Error display, workpiece counter, oil mist extraction, coolant system, etc.

Kondisi: bekas, Tahun pembuatan: 1986, de-en Chsdpfxet H Smte Aagja

Kondisi: sangat baik (bekas), gewinde-36-beschreibung Codpfx Aoyhq S Eeagoha

Tahun pembuatan: 1985, Kondisi: bekas, Workpiece diameter 50 mm Thread length 100 mm Thread pitch mm Total power requirement 1 kW Machine weight approx. 1500 kg Space requirement approx. m M O N N I E R & ZAHNER Switzerland Horizontal thread and worm milling machine with workpiece loading device Type 256 Year of manufacture approx. 1985 # 1349 _____ Workpiece Ø max. 1.5 - 50 mm Workpiece length max. 100 mm Chodpfxet Hwn Nj Aagea Axial milling length 100 mm Modulus for steel 1 Number of worm starts minimum 1 Centre distance tool–workpiece min./max. 0 – 70 mm Milling slide swiveling +/- 30° Cutter size Ø x length 70 x 16 mm Cutter speeds approx. 1,000 rpm Feed rate steplessly adjustable 0 – 6 m/min Spindle drive approx. 0.6 kW Total drive approx. 1 kW - 220 V/380 V / 50 Hz Weight approx. 1,500 kg Accessories / Special Equipment: • Simple machine for manufacturing (medical) screws or worm gears on shaft-type workpieces • LANDIS & GYR program control PCA • Swiveling workpiece magazine, however incomplete • Pneumatic tailstock slide, resp. steady rest holder, approx. 100 mm stroke • Approx. 20 collets for workpiece clamping • Various change gears for thread pitch generation • Workpiece counter Condition: good – ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – after order confirmation We currently have approx. 100 gear machines in stock and look forward to receiving your inquiry.

Kondisi: bekas, Tahun pembuatan: 1990, Motor power 5 kW Weight 1,500 kg Control system: CNC Offer in progress! Chedpfx Ajwgnz Njagea

Kondisi: bekas, Tahun pembuatan: 2011, Werkpiece diameter 320 mm Thread length 570 mm Chjdpfx Aet Hxbdoagja Thread pitch 315 mm Total power requirement 17 kW Machine weight approx. 12 t Space requirement approx. m O F F E R We can offer you, subject to prior sale and errors excepted, the following from stock on a non-binding basis: M I K R O M A T Universal Thread and Worm Grinding Machine Type GSU 320/1 PC Year 2011, completely overhauled # 2319.01.27 _____ Max. / Min. Grinding Ø 3 – 320 mm Max. Grinding length (Grinding wheel width 50 / 8 mm) 520 / 570 mm Distance between centers 1,000 mm Max. Workpiece weight 160 kg Workpiece spindle bore 40 mm Pitch range min./max. 0.25 - 315 mm Max. pitch angle + / - 40 ° Max. profile size 20 module Automatic radial indexing device 2/3/4/5/6/8/10/12/15/20/24/30/40/60 Relief grinding stroke 0 - 6 mm Plunge depth 0 - 6 mm Workpiece speeds 0.125 - 100 rpm Rapid traverse return 2 m/min Grinding wheel Ø x width x bore 500 x 60 x 203 mm Max. grinding wheel speed 1,595 rpm During rolling/dressing 12 - 32 rpm Spindle drive approx. 6.5 kW Total drive 17 kW - 380 V - 50 Hz Weight 9,500 / 12,000 kg Accessories / Special features • The machine was bought in 2011 directly from the manufacturer MIKROMAT as a fully overhauled and electronically modernized (as-new) machine! • Universal machine for automatic grinding of single- and multi-start worms as well as threads with straight and curved flanks using single- or multi-profile grinding wheels. • The machining processes longitudinal grinding, relief grinding, plunge grinding, groove grinding, and taper grinding can be executed via easy cycles in the SCHLEICHER PLC control PROMODUL U. In-feed and compensation take place automatically. Additional cams are needed for relief and taper grinding; indexing is performed via change gears! • Manual dressing device for profiling single-profile wheels, left and right flank • Non-driven steel pressure roller rolling attachment to be mounted above the grinding wheel • Open steady rest for mounting on the grinding table, as well as a closed 3-point steady rest • Workpiece driver system in the workpiece spindle with various centers, various workpiece arbors • Manual indexing device for circumferential division for mounting on the workpiece spindle • Large number of change gears, further accessories and various spare parts, operating manuals • Elaborate KNOLL coolant band filter system HL650/1500 with HYFRA cooling unit Condition: Very good – ready for demonstration – Delivery: Immediately ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. We always have thread grinding machines in stock – please inquire about your requirements!

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Chodpfx Aaotzdyzegoa

Kondisi: bekas, Tahun pembuatan: 2001, CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Druck 0,2-40 t Werkstückdurchmesser - max. 70 mm Gewindelänge 120 mm Steuerung Gesamtleistungsbedarf 29 kW Maschinengewicht ca. 9,5 t Raumbedarf ca. m Angebot Wir freuen uns, Ihnen aus unserem Lagerbestand anbieten zu können, vorbehaltlich vorherigen Verkaufs und Fehler in den technischen Daten: PROFIROLL - BAD DÜBEN (Deutschland) CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Modell ROLLEX Jahr 2001 Walzkraft stufenlos einstellbar 0,2 - 40 Tonnen Walzspindel-Ø 120 mm Werkstück-Ø, max. (ungefähr) 70 mm Spindelantrieb je ca. 8,5 kW Gesamtstromaufnahme ca. 29 kW - 400 V - 50 Hz Gewicht ca. 9.500 kg Zubehör / Besondere Merkmale Die Maschine ist mit einem modernen CNC-Steuerungssystem ausgestattet, das vom Hersteller entwickelt wurde. Mit Eingabe aller relevanten Prozessdaten und Werkstückdaten, um die Maschine einfach und schnell für andere Werkstückgrößen einzustellen (Umrüstzeit). Alle Prozessparameter werden grafisch auf dem Monitor dargestellt und bieten dem Benutzer einen optimierten Prozesszyklus. Aufgesetzte (Werkstück-) Zentrumswalzvorrichtung für wellenförmige Werkstücke (wie Getriebewellen) mit Mittellöchern, mit einer Spannvorrichtung, mit prismatischen Vorhaltern zur Positionierung des Werkstücks vor dem Spannen und mit einem motorisierten (angetriebenen) Reitstockzentrum auf der Vorderseite des Werkstücks. Der Hub des Werkstückschlittens beträgt ca. 500 mm - das Werkstück wird also geklemmt und hydraulisch zwischen den beiden Walzwerkzeugen bewegt. Kühlgerät für das Hydrauliköl, separater Schaltschrank, CNC-Bedienfeld usw. Durchsichtige Sicherheitsabdeckungen im Arbeitsbereich. Zentralschmierung. English translation: CNC Thread, Gear and Profile Rolling Machine Pressing force: 0.2 - 40 t Workpiece diameter - max. 70 mm Thread length: 120 mm CNC control Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. ... m OFFER We are pleased to offer you the following item from our stock, subject to prior sale and errors in technical data: PROFIROLL - BAD DÜBEN (Germany) Csdpfxst Hw N To Aageha CNC Thread, Gear and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force infinitely adjustable: 0.2 - 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive (each): approx. 8.5 kW Total electrical load: approx. 29 kW, 400 V, 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: * The machine is equipped with a modern CNC control system developed by the manufacturer. Entry of all relevant process data and workpiece data allows easy and quick retooling for different workpiece sizes (short changeover time). All process parameters are graphically displayed on the monitor and provide the user with an optimized process cycle. * Integrated (workpiece) center rolling device for shaft-type workpieces (such as gear shafts) with center holes, featuring a clamping device and prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the front of the workpiece. The stroke of the workpiece slide is approx. 500 mm; the workpiece is clamped and hydraulically moved between the two rolling tools. * Cooling unit for the hydraulic oil, separate control cabinet, CNC control panel, etc. * Transparent safety covers in the working area. Centralized lubrication system.

Kondisi: bekas, Tahun pembuatan: 1992, Grinding diameter - max. 0 mm Grinding length 0 mm Workpiece length 970 mm Chjdpot Hwpasfx Aagea Total power requirement 12 kW Machine weight approx. 5 t Space requirement approx. m Centre height with base 220 mm Centre distance/clamping length (without tailstock) 970 mm Table size 1,900 x 300 mm Upper table 1,500 x 160 mm X / Y / Z axis 750/320/320 mm Grinding head swivellable (B-axis) +/- 25° Grinding head rotatable about vertical axis (C-axis) 200° Speed range of R-axis (cylindrical grinding) 0-50 rpm Feed speed X / Y / Z axis 0.005 - 5 m/min Grinding spindle speeds, stepless 2,000 - 12,000 rpm Workpiece carrier mount 50 ISO Division possibility 1 - 999° Pitch options 0.5-10,000 mm Spindle drive/total drive 6/12 kW - 380 V - 50 Hz SCHÜTTE / NUM 760 CNC – Path control for 4+2 axes with BOSCH and SIEMENS components and screen, program input directly via keyboard in plain text or via external PC; free programming as per ISO/DIN for all workpieces; extensive archive of standard tool grinding programs available, combination programs, etc. C-axis as rotary table on the Z-axis column for rotating the grinding head 10-180-10°, lockable hydraulically B-axis as grinding head tiltable by motor +/- 25°, with hydraulic clamping B and C axis ideal for multiple grinding operations in an automatic cycle, e.g., flute grinding, hobbing cutter, peripheral grinding and face machining of workpieces, etc. R-axis for dividing and cylindrical grinding, manually rotatable and swivellable, hydraulic workpiece clamping 4+2 axis interpolation for finish grinding of complex straight-fluted and helical cutting tools, solid carbide tools, deep-hole drills, etc. Grinding spindle with stepless speeds (6 kW) and acceptance of grinding wheels left and right RENISHAW LP 2 probe on the grinding head for setting up and determining workpiece data Large coolant system with HD nozzle and POLO belt filter from 1999, oil mist extraction system Complete splash guard enclosure for working area with 3 doors (locked by CNC) 3 grinding wheel mounts, workpiece holder SK 50, reductions, etc. Probe insert SK 50 in conjunction with alignment arbor and grinding spindle reference standard.

Kondisi: bekas, Tahun pembuatan: 1977, Max. grinding diameter: 400 mm Grinding width: 0 mm Module - max.: (not specified) Module - min.: (not specified) Total power requirement: 3 kW Machine weight approx.: 4.2 t Space requirement approx.: (not specified) Wheel diameter (min./max.): 64 - 320 mm Grindable module size: 1 - 12 module Max. hob width: 40 mm Number of teeth: 13 - 240 Roll radius - Ø: 73 - 320 mm Workpiece table feed rates: 5 - 20 - 30 - 40 teeth/min Grinding wheel speed: 690 rpm Grinding wheel diameter: 762 mm Cedpfst Hwnvox Aagjha Grinding wheel swivel (engagement angle): 5-21° Grinding slide swivel (helix angle): 2 x 35° Vertical grinding slide adjustment: 240 mm Dressing speed: 1 / 0.5 / 0.25 m/min Grinding spindle drive / Total drive: 1.1 / 3 kW - 380 V - 50 Hz Weight approx.: 4,200 kg Accessories / Special equipment: The machine is suitable for grinding external and internal gear shaper wheels as well as for grinding master gears or cutter wheels for gear shaping machines. Unfortunately, no further accessories are available for the machine—an investment as a secondary machine is recommended if suitable tooling is already available.

Kondisi: bekas, Tahun pembuatan: 1985, Thread diameter 254 mm Grinding length 350 mm Thread pitch 51 mm Control system SIEMENS S 8 Chjdpjt Hw U Aofx Aagja Total power requirement 12 kW Machine weight approx. 5,000 kg Space requirement approx. ... m Internal thread grinding machine with PLC control

Kondisi: bekas, Tahun pembuatan: 1979, Workpiece diameter: 320 mm Thread length: 300 mm Thread pitch: mm Total power requirement: 90 kW Machine weight approx.: 12,000 kg Chodpfjt Hwnpjx Aagoa Space requirement approx.: m² Thread/Worm grinding machine for steering worm

Kondisi: bekas, Tahun pembuatan: 1994, en-001 Cedpfst Hw Nmox Aagjha