Beli Bengkel bekas (757)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit using a cleaning fluid. The agent is sprayed from the gun nozzle at a pressure of up to 8 Bar, allowing for thorough cleaning of hard-to-reach areas and heavily soiled parts contaminated with carbon deposits, grease, or oils. This washer is ideally suited for turbocharger reconditioning as well as cleaning heavily soiled parts made of steel, cast iron, aluminum, and other alloys. The washer’s lid is equipped with pneumatic actuators that enhance safety and the quality of work when using the washer. Kdjdpfxsvugwms Apvsl The cabinet is standard-equipped with work area lighting. The washer features a dual-function spray gun, which can dispense either only air or air mixed with the cleaning agent. The cleaned item can be dried with compressed air. * Please note: The washer is supplied as a self-assembly kit. Technical specifications: Capacity: 160L Fluid tank capacity: 8-14 L Operating pressure: 5-8 bar Weight: 29 kg Air regulation Pneumatic spray gun Illuminated cabinet Work area ventilation Dimensions: 770x610x700mm

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The workshop parts washer is a versatile tool that should be included in every service centre, garage, or workshop. This indispensable device enables fast and cost-effective removal of contaminants. A major advantage is the possibility of operating the washer indoors. The enclosed parts washer ensures the effective removal of all types of contamination, from oils to hard-to-reach deposits, while guaranteeing safety and long-term component performance. The technology used ensures not only cleanliness but also protection against corrosion. Please note that cleaning results will depend on the detergents used. Kodpfx Aovugvvepvodl The parts washer is designed to hold up to 60 litres of cleaning fluid, with a maximum tank capacity of 80 litres. For maximum efficiency, the pump inlet should be covered during operation. The pump operates at a flow rate of 10 to 12 litres per minute, allowing thorough cleaning of surfaces, including those with fine cracks, thanks to the powerful jet. The fluid is circulated from the bottom by the pump in a closed-loop system and delivered under pressure via a flexible hose. The workshop washer features four legs for stable operation and an optimised working height. The lid locks automatically when opened. The unit also includes a worktop located below the basin, which can be used to place washing accessories or cleaned parts for drying. The device requires self-assembly. Technical specifications: - Tank capacity: 80 L - Maximum pump capacity: 10-12 L/min - Power supply: 230 V - Dimensions: 775 x 540 x 915 mm - Internal dimensions: 710 x 480 x 260 mm - Shelf below basin: 700 x 420 mm - Power supply: 230 V - Weight: 23 kg Price does not apply to machines purchased in Poland.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Hundegger K2i 625x300 mm gergaji potong bawah meja, daya 11KW, pisau gergaji 800 mm, unit frais universal 5-sumbu, dudukan kombinasi untuk alat kerja vertikal, dudukan kombinasi untuk alat kerja horizontal, mesin bor 2,2KW, 1x vertikal 18mm x 460mm dan 2x horizontal 7mm, 8mm x 650mm. Stasiun pemutar balok otomatis sepenuhnya, hidrolik, perangkat transportasi dan pemosisian K2i, kontrol elektronik, meja penyimpanan 6 lengan, mesin frais jari vertikal 5,5 KW, mesin frais alur membujur dan melintang 15,5-30mm, alat penanda dan pelabel bawah dan belakang, area tumpuan yang diperhalus (krom), pelat penahan keselamatan yang dapat diangkat/turunkan kiri dan kanan, pisau gergaji 900 mm. Mesin siap untuk demonstrasi. Ketersediaan: Musim gugur 2026. Kodpfx Apjww Nuxsvjdl

Kondisi: sangat baik (bekas), en-GB Kodpfx Ajtk Ikmepvjdl

Kondisi: baik (bekas), Included in the scope of delivery: 01x Workbench, used System base dimensions: approx. 1,340 x 700 mm Top edge height of worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm Consisting of EACH: 02x Workbench stands, used Manufacturer: Dexion Type: P 90 Material finish: sendzimir galvanized Profile dimensions: 100 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted truss) 900 mm height 700 mm depth 04x Workbench beams, used Racking system: Dexion Type: Speedlock P90 Material finish: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO089|2 Clear span: 1,140 mm 08x Dexion safety pins, used Type: Speedlock P90 Material finish: sendzimir galvanized Head Ø: 13.58 mm Pin Ø: 5.92 mm Weight / pc.: 0.018 kg Chipboards, second choice, used Thickness: 38 mm Dimensions: 01x 1,400 x 1,000 mm 01x 1,120 x 700 mm Kdsdpfjx Itdljx Apvsl Surface: coated where applicable (single piece) 08x Wing screws countersunk head, new Dimensions: 6.3 x 70 mm Note: - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - Usual production time is approx. 3 - 5 working days. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transportation or shipping beyond this is subject to additional costs, which can be quoted separately depending on delivery location and volume.

Kondisi: sangat baik (bekas), Note: The images are provided to illustrate the material. - The workbench frames are picked and shipped unassembled; - The production time is generally about 3 to 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery: 04x square tubes, used Material colour: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drilling hole pattern: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profiles, used Material colour: Sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profiles, used Material colour: Sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x particle board, used Particle board thickness: 38 mm Particle board width: approx. 3,300 mm Particle board depth: approx. 850 mm Surface: possibly coated (may be two-piece) 08x mounting brackets, new Version: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 32x bolts: M12 32x nuts: M12 32x washers: M12 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Kdodpotk Irkofx Apvel Mr. Falk Deutsch General information regarding this item: This item is only available for collection. If transport or shipping of this item is required, it will incur additional costs, which can be provided upon request depending on the delivery location and scope of delivery.

Kondisi: sangat baik (bekas), Die Bilder dienen lediglich der Veranschaulichung des Materials. - Die Werkbankgestelle werden unmontiert kommissioniert. - Die Produktionszeit beträgt in der Regel etwa 3 bis 5 Werktage. Grundabmessungen: Breite: ca. 3,200 mm Höhe: ca. 940 mm Tiefe: ca. 850 mm Lieferumfang: 04x Quadratrohr, gebraucht Materialoberfläche: sendzimir-verzinkt Profilhöhe: ca. 900 mm Vierkantprofil: 140 x 140 x 4 mm Bohrbild: 75 x 50 mm Kedjtk Iwaspfx Apvjdl Bohrungsdurchmesser: 13 mm 02x CS Sigma Profil, gebraucht Materialoberfläche: sendzimir-verzinkt CS-Sigma Profil: ca. 300 x 85 x 28 x 15 mm Materialstärke: 2 mm Profillänge: ca. 2,900 mm 02x CS Sigma Profil, gebraucht Materialoberfläche: sendzimir-verzinkt CS-Sigma Profil: ca. 300 x 85 x 28 x 15 mm Materialstärke: 2 mm Profillänge: ca. 550 mm 01x Spanplatte, gebraucht Stärke: 38 mm Breite: ca. 3,000 mm Tiefe: ca. 850 mm Oberfläche: ggf. beschichtet (ggf. zweiteilig) 08x Montagewinkel, neu Ausführung: sendzimir-verzinkt Abmessungen: ca. 140 x 275 x 105 mm (T x B x H) Lochabstand außen: ca. 250 mm Lochabstand innen: ca. 130 mm Lochdurchmesser: ca. 13 mm Materialstärke: 3,0 mm Bohrschrauben, neu Ausführung: verzinkt Abmessungen: 6,3 x 70 mm 32x Schrauben: M12 32x Muttern: M12 32x Unterlegscheiben: M12 Ihre Ansprechpartner in unserem Hause: Herr Andre Evering Herr Mario Klöver Herr Falk Deutsch Allgemeine Hinweise zum Artikel: Dieser Artikel wird ausschließlich zur Selbstabholung angeboten. Ein gewünschter Transport bzw. Versand ist mit zusätzlichen Kosten verbunden, die individuell je nach Lieferort und Lieferumfang bei uns angefragt werden können.

Kondisi: sangat baik (bekas), The images are provided for illustration purposes. - The workbench frames are picked and packed unassembled. - Standard production time is approximately 3 to 5 business days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x Square tube, used Material finish: Sendzimir galvanized Kdodpfstk Iwpsx Apvjl Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drilling grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x Chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Chipboard depth: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting brackets, new Finish: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x Bolts: M12 32x Nuts: M12 32x Washers: M12 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping beyond this is subject to additional charges, which can be requested from us depending on the place of delivery and scope of delivery.

Kondisi: sangat baik (bekas), note-the-images-are-intended-to-illustrate-the-material-workbenc h-frames-are-picked-unassembled-production-time-is-usually-approx imately-3-5-working-days-basic-dimensions-width-approx-2-000-mm-h eight-approx-940-mm-depth-approx-850-mm-scope-of-delivery-include s-04x-square-tube-used-material-colour-sendzimir-galvanised-profi le-height-approx-900-mm-square-profile-140-x-140-x-4-mm-hole-grid -75-x-50-mm-hole-diameter-13-mm-02x-cs-sigma-profile-used-materia l-colour-sendzimir-galvanised-cs-sigma-profile-approx-300-x-85-x- 28-x-15-mm-material-thickness-2-mm-profile-length-approx-1-700-mm -02x-cs-sigma-profile-used-material-colour-sendzimir-galvanised-c s-sigma-profile-approx-300-x-85-x-28-x-15-mm-material-thickness-2 -mm-profile-length-approx-550-mm-01x-chipboard-used-chipboard-thi ckness-38-mm-chipboard-width-approx-2-000-mm-chipboard-depth-appr ox-850-mm-surface-possi Kdedortqm Djpfx Apvol

Kondisi: baru, daya: 349 kW (474,51 hp), jenis bahan bakar: diesel, ukuran ban: 325/95R24, konfigurasi gandar: 6x6, jarak roda: 4.500 mm, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, suspensi: baja, Perlengkapan: pendingin udara,

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 100 t, panjang langkah: 400 mm, - Capacity: 100 tonnes - Cylinder stroke: 400 mm - Working width: 1000 mm Kdjdpfx Aoq Nz Hmjpvsl - Movable cylinder - Pressure gauge - Supplied with V-blocks - Emergency stop - Documentation - 400V

Kondisi: baik (bekas), Stable workshop shelving Kdodsf Tx U Sjpfx Apvol Height: 2550 mm Width: 2740 mm Depth: 800 mm with wooden shelves

Tahun pembuatan: 2001, Kondisi: bekas, en-GB: Technical Details: Load capacity: 0.15 t Span: approx. 1200 mm Jib outreach: max. 1200 mm Lifting height: 2400 mm Lifting speed: manually controlled Machine weight approx.: 0.42 t Dimensions (L x W x H): 2.2 x 0.75 x 1.65 m Kodpou Nvixofx Apvedl Engine Hoist / Engine Crane Welded section steel construction Lifting movement via lifting beam, pneumatic vertical travel (pneumatic pressure cylinder) operated by hand control Load hook type SIKA 1, with rope safety latch Mobile, braked when tiller is in vertical position, double wheel swivels 90° to the right/left, two fixed front wheels Accessories: 2x various lifting slings and 1x chain approx. 950 mm in length

Kondisi: bekas, Tahun pembuatan: 2022, Technical details: Pressure: 30 t Stroke: 142.5 mm Table surface: 500 x 180 mm Kdedpfx Aou N A Eajpvol Clear opening in table: 500 x 160 mm Frame width: 1000 mm Installation height, table/ram at top: 120 - 1020 mm Machine weight approx.: 176 kg Machine dimensions (LxWxH): approx. 0.8 x 0.8 x 1.8 m (D) Simple hydraulic double-column press – special construction, welded from 20 mm steel plate. Table support with V-block: 260 x 205 mm Lower bolster installation height max./min.: 1031 / 151 mm Table height above floor max./min.: 1290 / 300 mm Lower bolster vertically adjustable manually, 10 steps, step spacing 100 mm Ram carriage with stroke cylinder Ø 63 mm and punch mount pin bore Ø 25 x 25 mm *

Kondisi: bekas,

Kondisi: bekas, Tool trolley, workshop trolley, mobile workshop cart, drawer cabinet, welding machine transport cart, machine transport cart -Width: 410 mm -Depth: 800 mm Ksdpfx Aofnqhnepvjdl -Height: 1010 mm -Weight: 49 kg

Kondisi: baik (bekas), Tool trolley, workshop trolley, mobile workshop cart, drawer cabinet, rolling cart -Manufacturer: Würth, stable workshop trolley -12 drawers: lockable, layout see photos -Dimensions (overall): 680 x 460 x H1045 mm Kdjdpfx Apjv Ivu Isvsl -Weight: 70 kg

Kondisi: bekas, Tool trolley, workshop trolley, mobile workshop cart, drawer cabinet, rolling cart - Workshop trolley: robust tool trolley - 4 drawers: lockable, partitioning as shown in photos - Contents: 25 tool holders HSK A63/B80 - Dimensions (overall): 885 x 555 x H 995 mm - Weight: 101 kg Kdodpfx Aperxgwqovsl

Kondisi: bekas, Tool trolley, workshop trolley, mobile workshop cart, drawer cabinet Kedpfxed I Da Ro Apvodl - Width: 560 mm - Depth: 665 mm - Height: 800 mm - Weight: 78 kg

Kondisi: baik (bekas), Tool trolley, workshop trolley, mobile workshop trolley, transport trolley, table trolley, assembly trolley - Workshop trolley: transport trolley, assembly trolley, foldable - Length: 1600 mm - Width: 1100 mm - Height: 1020 mm - Swivel castors: 4 pcs. with brake - Weight: 103 kg Kdsdsqzl H Aepfx Apvel

Kondisi: bekas, Tool trolley, workshop trolley, mobile workshop cart, transport cart, table cart - Workshop trolley: Transport cart made of aluminium, with drawer - Length: 1030 mm Kjdpfx Apsqxvxwovjdl - Width: 610 mm - Height: 980 mm - Swivel castors: 4 pcs., 2 with brakes - Weight: 24 kg

Kondisi: baru, Pressure 30 t Stroke 350 mm Table surface working width 750 x 260 mm Pressure 221 bar Oil capacity 37 l Working speed max. 9.8 mm/sec Return speed 14 mm/sec Kodpoi A S I Dofx Apvjdl Total power requirement 3 kW Machine weight approx. 385 kg Cylinder internal diameter [mm]: 130 Piston rod diameter [mm]: 55 Piston base diameter [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic power unit with variable speeds - Height-adjustable worktable - Joystick for piston and speed control The workshop press (30T) features a fixed cylinder and a motorised, height-adjustable worktable. Equipped with pressure regulation, pressure gauge, variable speed, and a joystick for moving the piston up and down. The joystick also allows you to adjust the speed, making this motorised hydraulic press ideal for precision work.

Kondisi: baru, Pressure 60 t Stroke 380 mm Table surface working width 750 mm Pressure 259 bar Oil capacity 38 l Approach speed 2.87 mm/sec Working speed 9.5 mm/sec Return speed 12 mm/sec Total power requirement 2.2 kW Machine weight approx. 540 kg Kdsdpfx Apji A S I Ijvel Cylinder inner diameter [mm]: 170 Piston rod diameter [mm]: 75 Piston base diameter [mm]: 100 - Integrated manometer - Pressure regulator - Hydraulic unit with 2 speeds - Height-adjustable working table - Joystick for moving the piston up/down The 60-ton workshop press is equipped with a fixed cylinder and a height-adjustable (motorized) working table. Features include pressure regulation, manometer, 2 speeds, and a joystick to control the piston up and down. Using the joystick, you can move the piston with precision, making this hydraulic press ideal for precision tasks.

Kondisi: baru, Tahun pembuatan: 2026, Pressure 200 t Stroke 400 mm Table surface working width 1300 mm Pressure 243 bar Oil capacity 64 dm³ Approach speed 5.73 mm/sec Working speed 1.84 mm/sec Return speed 7.08 mm/sec Total power requirement 3.0 kW Machine weight approx. 1690 kg Inside diameter of cylinder [mm]: 320 Piston rod diameter [mm]: 140 Piston base diameter [mm]: 175 - Adjustable cylinder (left-right) - Integrated manometer - Pressure regulator Kdedpfx Apot I D Thjvjl - Hydraulic unit with two speeds - Height-adjustable work table - Joystick for piston up/down movement - Hand pump for precision work - With digital display This 200-ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, pressure regulation, 2 speeds, a joystick, and a hand pump for precision pressing.

Kondisi: baru, Pressure 100 t Kdsdpfx Apei Db Erovol Stroke 380 mm Table surface 1740 x 996 mm Pressure 258 bar Approach speed 7.54 mm/sec Working speed 2.47 mm/sec Return speed 9.06 mm/sec Installation height 700 mm Table height 720 mm Total power requirement 2.2 kW Machine weight approx. 1685 kg - Manually movable gantry - Manually adjustable cylinder (left-right) - Cylinder extension down to the table - Integrated manometer - Pressure regulator - Hydraulic unit with two speeds - Joystick for moving the ram up/down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (sideways) and a movable frame (longitudinal direction) to provide easy access to all points of the work surface. The design of this gantry press allows heavy materials to be positioned on the table using a crane, and the gantry can then be moved over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is exceptional. In addition, the hydraulic unit features a pressure regulator, two speeds, a joystick, and a hand pump for precision pressing operations.