Beli Bentuk Tester bekas (1.740)

Kondisi: bekas, Rohranlage OME 320x8mm (A3782) Rohranlage OME 320x8mm (A3782) zur Herstellung von Rohren mit einem maximalen Durchmesser von 323 mm und einer maximalen Wandstärke von 8 mm Hersteller: Ome (Italien) Materialien: Warmgewalzt (HR), Kaltgewalzt (CR), Verzinkt (Galv) Zustand: Neu Rohrdurchmesser: 168 mm – 323 mm Wandstärke: 2 mm – 8 mm Laufrichtung: L-R Arbeitsgeschwindigkeit: 35 Meter pro Minute FORMIERGERÜST Passage Nr. 1, Angetriebene Formierung #1 Passage Nr. 2, Angetriebene Formierung #2 Passage Nr. 3, Angetriebene Formierung #3 Passage Nr. 4, Angetriebene Formierung #4 Passage Nr. 5, Angetriebene Formierung #5 Passage Nr. 6, Angetriebene Formierung #6 Passage Nr. 7, Seitliche Mitlauf-Formierungsstation Passage Nr. 9, Angetriebene Formierung #7 Passage Nr. 10, Seitliche Mitlauf-Formierungsstation FIN-PASS-SECTION, EINPUNKTVERSTELLUNG Passage Nr. 11, Angetriebener Fin-Pass #1 Passage Nr. 12, Seitlicher Mitlauf-Fin-Pass Passage Nr. 13, Angetriebener Fin-Pass #2 Passage Nr. 14, Seitlicher Mitlauf-Fin-Pass Passage Nr. 15, Angetriebener Fin-Pass #3 Passage Nr. 16, Angetriebener Fin-Pass #4 KALIBRIERGERÜST Passage Nr. 26, Angetriebene Kalibrierung #1 Passage Nr. 27, Angetriebene Kalibrierung #2 Fjdsq Ul Rvspfx Ahuega Passage Nr. 28, Angetriebene Kalibrierung #3 NDT Prueftechnik Passage Nr. 29, Angetriebene Kalibrierung #4 Passage Nr. 30, Angetriebene Kalibrierung #5 RICHT- UND VIERKANTSTATION Passage Nr. 31, Mitlaufender Richtturk’s Head #1 (Walzenhalterplatten NICHT verfügbar) Passage Nr. 32, Mitlaufender Richtturk’s Head #2 (Walzenhalterplatten NICHT verfügbar) Passage Nr. 33, Mitlaufender Richtturk’s Head #3 (Walzenhalterplatten NICHT verfügbar) Passage Nr. 34, Mitlaufender Richtturk’s Head #4 (Walzenhalterplatten NICHT verfügbar) Tische und Werkzeuge zum Walzenwechsel ABB Motoren Costamasnaga-Getriebe Zentralisierte Schmieranlage Hydraulikaggregat Komplette Mühlenautomatisierung mit Schaltplänen (OTO MILLS/Elletre 2013) Komplettes Hydrauliksystem Abgas- und Dampf-Absaugsystem mit Absaughauben (EUROFILTER) Komplettes Zink-Abgasabsaugsystem (DONALDSON)

Kondisi: baik (bekas), de-Weinig Hydromat H23, 8 Spindeln 50mm Spindeln, 6.000 U/min Untere Spindel 7,5 kW für Hobelarbeiten vorbereitet Rechte Spindel 7,5 kW für gerade Hobelarbeiten vorbereitet Linke Spindel 15 kW für gerade und Profilhobeln vorbereitet Rechte Spindel 11 kW für Profileinrichtung vorbereitet Obere Spindel 15 kW für Hobelarbeiten vorbereitet Untere Spindel 18,5 kW für Hobelarbeiten vorbereitet Obere Spindel 11 kW für gerade und Profilhobeln vorbereitet, mit Außenlager Untere Spindel 7,5 kW für gerade und Profilhobeln vorbereitet, mit Außenlager 7,5 kW Vorschubmotor Automatisches Schmiersystem Vollständig geschlossene, schwere Schallschutzkabine Fgedpjyrrh Nofx Ahuoa Lieferung mit Kehlautomaten-Einlauf- und Auslaufstrecken möglich. Werkzeugbestückung auf Wunsch verfügbar.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Leadermac Speedmac 631 Fgedpfxeyrrhpo Ahusa Lebar kerja: 310 mm, tinggi: 150 mm. Spindel: 6 x 50mm (4x spindel dengan kontrol kecepatan inverter) Bawah (22 kW) - 6000 rpm, bantalan luar Kanan (15 kW) - (4000 hingga 9000 rpm), jointer lurus Kiri (15 kW) - (4000 hingga 9000 rpm), jointer lurus Atas (22 kW) - 6000 rpm, bantalan luar Atas (22 kW) - (4000 hingga 9000 rpm), bantalan luar, jointer lurus Bawah (22 kW) - (4000 hingga 9000 rpm), bantalan luar, jointer lurus Penyesuaian posisi spindel elektronik sebagai berikut: 1. Penyesuaian lebar spindel ke-3. 2. Penyesuaian tebal spindel ke-4. 3. Penyesuaian tebal spindel ke-5. Kecepatan umpan 60 m/menit (dapat ditingkatkan). Roller pengumpan atas 200 mm (2 pertama) dan sisanya 140 mm Koneksi: 380 V / 50 Hz Dokumentasi lengkap disertakan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Weinig H1000 mesin moulding Weinig Hydromat 1000 dengan 5 spindle. (Tahun 2012) Panel listrik terpisah Fgjdpjyrrc Hsfx Ahuja Panel remote control terpisah Sistem pelumasan otomatis untuk meja feeding Sistem memori Penutup peredam suara penuh No 1. 7,5 kW - Bawah 6000 rpm + bantalan luar + jointer lurus No 2. 7,5 kW - Kanan 6000 rpm + jointer profil No 3. 7,5 kW - Kiri 6000 rpm + jointer profil No 4. 7,5 kW - Atas 6000 rpm + bantalan luar + jointer lurus No 5. 7,5 kW - Bawah 6000 rpm + bantalan luar + jointer lurus Spindle 50mm Penggerak balok 0,55 kW Dokumentasi lengkap disertakan. Manifold ekstraksi disertakan. Dapat disediakan dengan mekanisasi Weinig jika diperlukan (Tahun 2012)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Weinig Hydromat 23C dengan 6 spindle. Panel listrik terpisah. Sistem pelumasan otomatis untuk meja kerja. Dimensi maksimum 140mm x 230mm. No 1. 11kW – Bawah 6000rpm + bantalan luar – jointer lurus siap pakai. No 2. 11kW – Kanan 6000rpm – jointer lurus dan profil siap pakai. No 3. 11kW – Kiri 6000rpm – jointer lurus dan profil siap pakai. No 4. 15kW – Atas 6000rpm + bantalan luar – jointer siap pakai. No 5. 11kW – Atas 6000rpm + bantalan luar – jointer lurus. No 6. 18,5kW – Bawah 6000rpm + bantalan luar – jointer lurus. Tenaga feed 7,5 kW. 6–60 m/menit (kecepatan dapat ditingkatkan sesuai kebutuhan). Spindle 50mm. Motor pengangkut 0,55 kW. Dokumentasi lengkap termasuk. Dapat disediakan dengan pisau hidro jika dibutuhkan. Fgodpfsyrrcmsx Ahuoa Dapat disediakan dengan infeed dan outfeed jika diperlukan.

Kondisi: sangat baik (bekas), de1 Fodpfx Ajyrrb Ajhusga

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Weinig H1000 moulding dengan infeed E3 dan outfeed A3 Fgsdeyrrbpjpfx Ahuea Weinig Hydromat 1000 dengan 5 spindle. (Tahun 2012) Panel listrik terpisah Panel remote control terpisah Sistem pelumasan otomatis untuk alas mesin Sistem memori Peredam suara penuh Infeed moulding Weinig E3 + lift gunting paket (3000kg). Outfeed drop leaf Weinig A3 + lift gunting paket (3000kg) + konveyor rantai outfeed paket. No 1. 7,5kW - Bawah 6000rpm + bantalan luar + jointer lurus No 2. 7,5kW - Kanan 6000rpm + jointer profil No 3. 7,5kW - Kiri 6000rpm + jointer profil No 4. 7,5kW - Atas 6000rpm + bantalan luar + jointer lurus No 5. 7,5kW - Bawah 6000rpm + bantalan luar + jointer lurus Spindle 50mm Balok 0,55kW Dokumentasi lengkap disertakan. Manifold ekstraksi sudah termasuk.

Kondisi: baik (bekas), WEINIG UNIMAT 23EL 9 SPINDEL MEJA MASUK PENDEK 1: BAWAH 7,5KW 2: KANAN 11 KW 3: KIRI 7,5 KW 4: KANAN 7,5 KW 5: ATAS 11 KW 6: BAWAH 7,5 KW 7: ATAS 11 KW 8: BAWAH 11 KW 9: UNIVERSAL 7,5 KW, DAPAT DIMIRINGKAN 360° SPINDEL 8000 RPM. MOTOR FEED 7,5 KW KECEPATAN UMPAN MAKS. 44M/MENIT 13 x ROLLER UMPAN ATAS PENGGERAK 6 x ROLLER UMPAN MEJA PENGGERAK PELUMASAN MEJA OTOMATIS Fsdpfx Aheyrra Eousga ROLLER TEKAN SAMPING BERTENAGA PNEUMATIK PENAHAN ATAS PNEUMATIK DI 6+8 DIMENSI: KIRA-KIRA 5000 X 2000 X 1800 MM BERAT: KIRA-KIRA 6500 KG KONEKTOR DEBU: 9 x 140 MM DIAMETER MANIFOLD EKSTRAKSI TERMASUK DOKUMENTASI LENGKAP TERMASUK

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Device for scratch testing to characterize the adhesion and scratch resistance of thin coatings and solid materials. The scratch testing procedure involves scoring the surface with a diamond tip under either a constant or progressive load. During the scratch process, the sample is moved under a video system to examine various types of damages caused by the tip and correlate these with the applied load. Fodpfx Aeytrufehuoga The images can be digitized and precisely aligned with emission, acoustic, and loading diagrams. This standardized process allows for the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-scratch function (multiple scratches on the same track), friction force measurement, and a 2018 upgrade: new illumination system with analyzer, polarizer, two apertures and filters, as well as high-resolution INFINITY lenses (5X and 20X), plus a lens holder with adjusting screws for easy tip/microscope calibration. Including a calibration kit for table speed and applied load sensor.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 45802, Handtmann RF 440 round former dengan vacuum filler untuk produksi otomatis bakso dan bola-bola dengan kualitas buatan sendiri. Tahun pembuatan 2021, kondisi sangat minim pemakaian seperti baru! Fjdpfxeyk U Ezs Ahusga

Kondisi: bekas, Single-column Hydraulic Press DUNKES Type HZT 2.5 Machine No. H94-2558 Year of manufacture: 1994 Press force: 2.5 tons Throat depth: 180 mm Table dimensions: 420 x 300 mm Pass-through opening in table: 60 x 185 mm Ram area: Ø 40 mm Fgedpfx Aheh Uhqyouea Clamping pin bore: Ø 20 mm Ram stroke: 160 mm Max. installation height: 250 mm Rapid down movement: 65 mm/sec Rapid up movement: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Hydraulic tank capacity: approx. 100 liters Drive power: 1.5 kW Electrical connection: 400 Volt, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod - Pressure and stroke cut-off - Two-hand operation on the machine - Stroke counter - Fail-safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for hand insertion operations) - 32,047 recorded operating hours - Electrical and hydraulic circuit diagrams available Required space (L x W x H): 1,100 x 980 x 1,950 mm Weight: 700 kg Very good condition

Kondisi: bekas, Single-column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Fgjdpohrakvsfx Ahuja Ram stroke: 500 mm Throat depth: 300 mm Installation height: 700 mm Table size: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping bore: Ø 40 mm Table height above floor: 855 mm Rapid advance speed: 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 controller - Measurement system for stroke adjustment - Pressing speed steplessly adjustable via potentiometer - Pressure steplessly adjustable via manual pressure regulator - Short-stroke device - Mechanical tool clamping on ram with T-slots and clamping pin bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control unit prepared for electrical tool monitoring - Hydraulic and electrical schematics available Space requirement (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift Fjdpjh A S Htsfx Ahujga - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Kondisi: bekas, Test bench, test station, measuring station, test device, measuring instrument, tester for HV, PE, and insulation measurement ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High Voltage Test Device The PE/IS/HV SCT 42 / 91-3J.3 is used for measuring dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement Fsdpfof Axn Aox Ahujga - Protective conductor voltage drop measurement The unit 90-1V supplies a highly stable DC voltage with low ripple. One output pole carries the high voltage, the other output pole is near earth potential and can be set to a maximum of 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as pictured Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices available under stock numbers 57819, 57820, and 57821.

Kondisi: bekas, Edge beveller, beveling machine, weld edge preparer TRUMPF Beveling steel plates for weld seam preparation Model: TKF 103 Sheet thickness: 4 - 25 mm Max. bevel length: 10 mm Bevel angle: 30° Power: 2000 watts Power supply: 220 volts, 50 Hz - Equipped with guide handle for 30° bevel angle - Re-grindable shear blade for high tool utilization - Set up for 20 mm sheet thickness Fsdpfx Ahjdz Sq Esuega For chamfering straight and curved edges with a minimum radius of 40 mm. For beveling edges on flat and contoured workpieces, as well as pipes with a minimum inner diameter of 80 mm. Weight: 14 kg

Kondisi: bekas, Control panel, test station, measurement station, test device, measuring instrument, tester for HV, PE, IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage tester The device PE/IS/HV / 91-3J.3 is designed for testing dielectric strength, insulation resistance, and protective earth voltage drop measurements in accordance with VDE 0113 and IEC regulations per EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The device SHV 16 / 90-1V.3 delivers a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other output terminal is near ground and can be set to a maximum potential of 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 Watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact device assembly on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Fgedpfsd Dc Unjx Ahusa Good condition Many more ELABO devices under stock numbers 57820 and 57821

Kondisi: siap digunakan (bekas), 1 Fodpfx Ajytn Hkjhujga

Kondisi: sangat baik (bekas), CRM Self-Stacking Burger Former Solusi Inovatif untuk Produksi Burger yang Efisien Fedpfx Ahoyub Rxjujga CRM Self-Stacking Burger Former adalah mesin intuitif dan sangat serbaguna yang dirancang untuk memenuhi kebutuhan pembentukan dan porsi makanan Anda. Dirancang untuk kemudahan penggunaan, mesin ini menjamin hasil yang konsisten dan berkualitas tinggi saat memproduksi burger bertumpuk. Mampu mengolah berbagai bahan—termasuk daging, ikan, kentang, sayuran, makanan etnis, mentega, keju, produk roti, makanan hewan, dan kembang gula—CRM Self-Stacking Burger Former menawarkan fleksibilitas dalam memproduksi beragam bentuk dan ukuran sesuai kebutuhan produk spesifik Anda.

Kondisi: baik (bekas), WEINIG UNIMAT 23EL 9 Spindle Meja Infeed Pendek Fsdpfeyahubjx Ahusga 1: Bawah 7,5 kW 2: Kanan 11 kW 3: Kiri 7,5 kW 4: Kanan 7,5 kW 5: Atas 11 kW 6: Bawah 7,5 kW 7: Atas 11 kW 8: Bawah 11 kW 9: Universal 7,5 kW, bisa diputar 360° Spindle 8000 RPM Motor Pengumpan 7,5 kW Kecepatan pengumpan maksimal 44 m/menit 13 x Roller Pengumpan Atas Digerek 6 x Roller Pengumpan Alas Digerek Pelumasan alas otomatis Roller Tekan Samping Bertenaga Pneumatik Penahan Tekan Pneumatik pada spindle 6+8 Dimensi: Sekitar 5000 x 2000 x 1800 mm Berat: Sekitar 6500 kg Tutup debu: 9 x diameter 140 mm Manifold Ekstraksi Termasuk Dokumentasi lengkap disertakan

Kondisi: sangat baik (bekas), en-001 Fsdpfxoyr S S Ue Ahusga

Tahun pembuatan: 2026, Kondisi: baru, Instantaneous water heater with tube heat exchanger directly in the boiler water * Compact design and low weight * Energy savings up to 10%! Fgsdpfx Ahot Hfygjuja * Low maintenance * Easy cleaning * Excellent price/performance ratio * Available with oil or gas burner Technical data: * Boiler output: 100 kW * Hourly output up to 1,350 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK – Pasteurisation systems for over 30 years Proven technology – over 500 units in customer use

Tahun pembuatan: 2026, Kondisi: baru, Instantaneous water heater with tube heat exchanger directly in boiler water * Compact dimensions and low weight * Up to 10% energy savings! * Low maintenance * Easy cleaning * Excellent price/performance ratio * Available with oil or gas burner Technical data: * Boiler output: 80 kW * Hourly capacity: up to 1,100 liters (10–78 °C) Fsdpfx Ast Hfyajhusga * Dimensions (H/W/D): approx. 160 x 110 x 160 cm * Empty weight: approx. 280 kg ##### RINK – Pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Tahun pembuatan: 2026, Kondisi: baru, Instantaneous water heater with tube heat exchanger directly in the boiler water * Compact design and low weight * Energy savings of up to 10%! * Low maintenance * Easy to clean * Excellent price/performance ratio * Available with oil or gas burner Technical specifications: * Boiler output: 60 kW * Hourly capacity: up to 850 liters (10–78 °C) * Dimensions (H/W/D): approx. 160 x 110 x 140 cm * Empty weight: approx. 230 kg Fedpfx Ahjt Hfx Aouega ##### RINK - Pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Tahun pembuatan: 2026, Kondisi: baru, Tankless water heater with tube heat exchanger integrated directly in the boiler water Fgedpfx Ahjt Eui Iouea * Compact design and low weight * Energy savings up to 10%! * Low maintenance * Easy to clean * Excellent price-performance ratio * Available with oil or gas burner Technical specifications: * Boiler output: 40 kW * Hourly capacity: up to 550 liters (10-78 °C) * Dimensions (H/W/D): approx. 140 x 100 x 115 cm * Empty weight: approx. 190 kg ##### RINK – Pasteurization systems for over 30 years Proven technology – more than 500 units in customer operation

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, en-de-01 Fedpfx Ahouggpzsuoga