Beli Beratnya Sistem bekas (19.145)

Kondisi: sangat baik (bekas), Active cooling system We offer you an active cooling system here. Active cooling system Type: EOL EMP 242 Condition: used Scope of delivery: (see photo) Ksden Apnaopfx Aayodw (Subject to modifications and errors in the technical specifications!) If you have any further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Thermo Finnigan Type: Thermo Finnigan Trace MS 2160 / Thermo Finnigan DSQ II Thermo Finnigan Mass Spectrometer Thermo Finnigan GC/MS System Trace MS 2160 with Thermo Finnigan DSQ II Description: Mass spectrometer Mass range up to m/z 1050 Ionization methods: EI, (CI) Quadrupole separation system Automatic sample changer Kdsdpfxevyd S Ss Aayow Data system: Xcalibur with NIST spectral library Split/splitless injector and PTV injector Direct sample introduction via push rod Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) If you have further questions, we will be happy to advise you by phone.

Kondisi: sangat baik (bekas), Laser system with Laserline diode laser and Lascon Controller Here we offer you a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser ‘LDM 500-60’ has a wavelength of 935 nanometres and an output power of 550 watt. Laser Type: LDM 500-60 Wavelength: 935 nanometres +-10% Laser Power: 550 W Mains Voltage: 100-264V +- 10% Kedpfx Aodux Dueayjdw Max Power Consumption: 1.7 kW Frequency: 1 phase, 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a full-fledged PC in a compact design. Instead of a hard drive, a removable flash disk has been installed. With the absence of a hard drive and very low heat generation, the LPC03 is ideally suited for measurement, control, and regulation tasks in industrial environments. Fibre-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is simply connected at the rear panel. The case also offers space for the PCI-1P card. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, maximum length 180mm Drives: none Storage medium: removable flash disk Connections: USB (front), Ethernet, RS232, VGA, Keypad, Mouse, USB (rear) Housing: 212mm x 80mm x 250mm (H x W x D) Protection rating: Front: IP40 Operating environment: 15°C - 40°C Type: LPC03 Condition: used Scope of delivery: (See photo) (Subject to technical modifications and errors! All information is non-binding.) For further questions please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Here we offer you a RIVSET punch riveting system. Including punch riveting tongs 9524-640-826-7 Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 With Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Max. permissible riveting pressure: 250 bar Max. permissible riveting force: 78 kN Weight of tongs: approx. 195 kg Kdedpjpfcx Iefx Aayow Type: 9524-640-826-7 The system has been inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data!) For further questions, please feel free to contact us by phone.

Kondisi: baik (bekas), Horiba Type: Mexa 7100D Technical Data: The device measures the exhaust gas concentration of CO(L), CO(H), CO2, O2, THC, CH4, non-Ch4, NO, NOx, and NO2 individually. The system includes the following analyzers: Kdsdpfeuz Tvyox Aayow - CO/CO2 Analyzer AIA-72X - O2 Analyzer MPA-720 - NO/NOx Analyzer CLA-757 - THC Analyzer FIA-/26 The calculated and measured values from the MEXA can be output via an analog interface or network connection. Year of manufacture: 2011 Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications and information!) If you have any further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Here, we offer you an Iridex Laser System OcuLight SLx. IRIDEX Oculight SLx Tri-Mode 810 nm Diode Laser Description: - Engineered for durability, featuring a thermal management system to enhance efficiency and the reliability of laser output - Upgraded user interface with conveniently arranged, easy-to-understand controls - Designed for easy transport between rooms and offices - Tri-Mode capability delivers three different laser energy delivery modalities: CW-Pulse, MicroPulse, and Long-Pulse - Highly ergonomic user interface, infrared wavelength - Broad selection of delivery systems enables a wide range of treatment options - Well-suited for Retinopathy of Prematurity and advanced-stage glaucoma - CW-Pulse mode delivers energy in single or repeated exposures - LongPulse mode provides laser energy over extended periods - MicroPulse mode delivers laser energy in a sequence of short pulses, allowing for precise control of thermal effects Key Features: - Application area: Ophthalmic - Amplifying medium: Solid-state - Ergonomics: Table-top unit - Wavelength: 810 nm - Treatment laser power: Infrared diode laser 810 nm, 0–3000 mW - Aiming laser power: Red diode laser 650–670 nm, 0 to < 1.0 mW - Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot SLAs, LIO and OMAs - Exposure durations: CW-Pulse 10–9000 ms, MicroPulse 0.1–1.0 ms, LongPulse 10 s–30 min - No external air or water cooling required - Weight: 6.4 kg Kdjdpfx Aenp Icdeayow - Length: 10 mm - Width: 30 mm - Height: 30 mm Clinical Applications: The Oculight SLx laser system can be used for performing retinal photocoagulation and glaucoma interventions. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also provides some unique treatment capabilities, such as: - Transscleral retinal photocoagulation for retinal tears and detachments - Transscleral cyclophotocoagulation for refractory glaucoma - Transpupillary thermotherapy photocoagulation for choroidal lesions - Subthreshold MicroPulse photocoagulation for diabetic retinopathy and age-related macular degeneration (AMD) Laser Indirect Ophthalmoscope (LIO) - The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients best examined and treated in the supine position. - It is considered an industry-unique optical design that eliminates the need for laser focus adjustment and accommodates a wide range of working distances. Type: Iridex OcuLight SLx Condition: Used Scope of delivery: (See photo) (Specifications and technical data are subject to change and errors are excepted!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), RS simulators RS Simulator ST2K 320/70D Water-cooled shock test system For sale is a high-performance thermal shock test system, model ST2K 320/70D. This system is ideally suited for standardized thermal shock testing according to DIN EN 60068-2-14, including optional humidity testing in the upper test chamber. With its two temperature chambers (–70 °C to +240 °C) and automatic test basket transfer, this unit provides the perfect solution for component, material, and reliability testing in industrial, research, and quality assurance applications. Main technical data: Temperature ranges Upper test chamber: +40 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Lower test chamber: –70 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Humidity testing (optional) – Upper test chamber Temperature: +40 °C to +90 °C Humidity: 20% to 98% rH (±2–5%) Test basket transfer: Vertical movement, < 10 seconds changeover time Power supply: Total power: 16 kVA Current draw: 32 A Main fuse: 3× 35 A slow-blow Power connection: 3× 400 V / N / PE / 50 Hz Main supply line: 5× 16 mm² Water & compressed air connections Cooling water supply: G ¾", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 1.4 m³/h Cooling water return: G ¾", max. 25.2 °C Condensate drains: 2× G ½", 1× G ¼", no pressure Supply of demineralized water: G ⅜", approx. 3 bar, max. 6 bar Compressed air connection: Quick coupling NW 7.2 (G ¼"), min. 4 bar, max. 10 bar Dimensions & weight: Test basket internal dimensions (Type ST2K 320) Internal dimensions: width approx. 430 mm, height approx. 470 mm, depth approx. 700 mm External dimensions: width: approx. 1100 mm, height: approx. 2300 mm, depth: approx. 2300 mm Weight: approx. 1150 kg Other technical data Sound pressure level: approx. 60 dB(A) at 1 m distance (free field) Refrigerants: R-404A: approx. 2.5 kg (GWP 3,800, threshold 0.48 kg/m³) R-23: approx. 0.8 kg (GWP 12,100, threshold 0.68 kg/m³) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25%–75% rH Important safety information for buyers! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally approved refrigerant if required 3. Leak test with certificate 4. Upon successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) Kdsdswx Ip Depfx Aayew For further questions, please feel free to call us.

Kondisi: baik (bekas), Here we offer a Bosch Sigpack Systems unit with Manz Aico pendant hand programmer. Bosch Sigpack Systems with Manz Aico Pendant Hand Programmer Bosch Sigpack Systems XR31-3 Kdedpfx Aasdqbbceyew with Manz Aico Pendant P51 Hand Programmer 80017134 Bosch Sigpack Systems Type: XR31-3 Manz Hand Programmer Type: 80017134 Condition: used Scope of delivery: (see picture) (Technical specifications are subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone. Written orders are possible via email or fax.

Kondisi: sangat baik (bekas), Here we offer you a TOX complete punch riveting system. TOX Complete Punch Riveting System Type TZ-VSN The punch rivet first penetrates all joining materials and ejects the punch slug from the joining point. With this innovative punch riveting technology, TOX PRESSOTECHNIK, the specialist for sheet metal connections, expands its range of products and services with a future-oriented process. Punch riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight construction, as well as for joining hybrid components and assemblies. Kjdpjdz Afwefx Aayodw The rivet feeders, tong and tool holders are designed to be so universal that punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be flexibly processed using both TOX hand tongs and TOX robot tongs. Type TZ-VSN Pressing force: 55 kN Total stroke: 140 mm Rivet type: diameter 5x4.6 Connection data Power: 3.4 kW Voltage supply: 400/15/50-60 V/A/Hz Speed: 200 mm/s Network configuration: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See image) (Technical data subject to change and errors excepted!) Further questions can be answered by phone. Written orders possible by email or fax.

Kondisi: sangat baik (bekas), IPG Kodpfstr Ep Nox Aayodw Type: YLS - 5000 Description: IPG Ytterbium Laser System YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processing heads Independent power control via fieldbus interface Advanced IPG power supply with integrated safety features Laser emission ON watchdog Specifications: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA Year of manufacture: 2011 S/N: 11101050 Condition: used Scope of delivery: (See images) (Specifications and technical details subject to change and errors reserved!) For further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), en-GB Kdsdpfx Ajw Tbvreayew

Kondisi: sangat baik (bekas), Here we offer you a TOX self-pierce riveting system. TOX Self-Pierce Riveting System Type TZ-VSN The self-pierce rivet initially penetrates all joining partners and pushes the punched slug out of the joint area. With this innovative self-pierce riveting technology, TOX PRESSOTECHNIK, the specialist for sheet metal connections, expands its product and service portfolio with a pioneering joining process. Self-pierce riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and for joining hybrid parts and assemblies. The rivet feed systems, tongs, and tool holders are universally designed so that self-pierce rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as self-pierce rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be flexibly processed with either TOX hand tongs or TOX robotic tongs. Type: TZ-VSN Pressing force: 55 kN Total stroke: 140 mm Rivet type: diameter 5 x 4.6 mm Electrical specifications: • Power: 3.4 kW Kdjdpfodz Af Aox Aaysw • Mains supply: 400/15/50-60 V/A/Hz • Speed: 200 mm/s • Network type: 3P+N+PE • Control voltage: 24 V DC • Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Specifications and technical details are subject to change and correction!) If you have further questions, we are happy to answer them by phone. Written orders are possible via email or fax.

Kondisi: sangat baik (bekas), Fries Research & Technology Device Designation: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series by Fries Research & Technology GmbH (FRT). These systems are designed for non-destructive and non-contact analysis of surface parameters such as topography, roughness, layer thickness, and more. Features of the FRT MicroProf: Device Details: Model: FRT MicroProf® MPR1250 Article number: 200 00 Sensor type: CWL 300 µm Serial number: 0904001 Measurement principle: Chromatic confocal point sensor Light source: Halogen lamp, white light Vertical resolution: up to 3 nm Measurement accuracy (Z): 100 nm Lateral resolution (XY): 2.5 µm Measuring angle to surface: 90° ±30° Max. sample size: approx. 310 x 310 x 50 mm Technical Data (excerpt): XY Table: Type: Compact XY-cross table Travel range (measuring range): 200 x 200 mm Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Position measurement system: Heidenhain glass scale with reference mark Measurement system resolution: 0.2 µm Repeatability: < ±1 µm Squareness XY: < 4 µm / 200 mm Height deviation (per axis): < 2 µm / 200 mm Z-Axis (motorized): Type: Linear axis Travel range: 50 mm (optionally 100 mm) Drive: Stepper motor with spindle drive Side deviation: < 2 µm / 50 mm Manual Coarse Adjustment (optional): Type: dovetail guide Adjustment range: up to 300 mm sample height Measurement: Minimum point spacing (XY): 0.6 µm Sample size: approx. 310 x 310 x 50 mm Max. sample weight: 5 kg (optionally 10 kg) Measuring speed: 1 µm/s up to max. 100 mm/s System: Total weight: approx. 275 kg (measuring setup: 225 kg) Footprint measuring setup: approx. 0.9 x 0.8 m Dimensions control unit (W x D x H): approx. 0.55 x 0.53 x 0.32 m Power supply (EU/US): 110–240 V, 50–60 Hz, 16 A Power consumption: approx. 300–400 W Operating Conditions: Temperature range: 22 °C ±5 °C Temperature stability: < 0.5 °C Weight approx. 500 kg Condition: The system is in very good technical and visual condition. All axes move precisely and smoothly. Scope of Delivery: MicroProf® MPR200 00 XY measuring system Control unit Connection cables (Subject to alterations and errors in technical data and information!) Inspection & on-site testing possible by arrangement. Kdsdpfxjwh Swdj Aayjw We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Here we offer you a control unit. Control unit for RIVSET clinching system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was checked by the manufacturer and is operational. Condition: used Scope of delivery: (see picture) Kodpfepgul Eox Aaysdw (Subject to technical changes and errors in the specifications!) For further questions, we are happy to assist you by phone.

Kondisi: baik (bekas), Heinzinger We are offering you a battery module tester here. Description: High-dynamic test bench energy system Bidirectional DC power supply with active energy recovery, liquid-cooled Voltage [max]: 20 - 600 V adjustable Kedpfxoq Nzwaj Aayodw Current [max]: ± 500 A adjustable System power [max]: ± 160,000 W Mains connection (3/N/PE): 3x400V ±10% 47 ... 63Hz Software: Battery simulation software for load-change-optimized control Dimensions (W/H/D): 1800/2330/800 mm Type: ERS 600-500/160 Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and corrections!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Votan Type: Jenoptik Votan W4 Ksdpfshr Dliox Aayjdw Votan Jenoptik modular laser welding system Votan Jenoptik laser machine Votan W modular laser welding system Laser welding allows you to join plastic parts with precision, energy efficiency, and speed. This process creates strong and durable welds that are free from any visible markings on the finished side. As such, plastic welding using laser technology also meets the highest aesthetic requirements. Nominal voltage/frequency: 3x 400 V / N / PE / 50 Hz Control voltage: 24 V DC Maximum current: 20 A Main fuse: 25 A Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors. All data provided without guarantee!) For any further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), RMS vibration exciter with power amplifier and cooling fan Here we offer you an RMS vibration exciter with power amplifier. Vibration Exciter SW 1507 Max force: 2158 N Max velocity: 1.3 m/s Power Amplifier TGA 1500 3 x 380V / 50Hz / 35A / 8 kVA Condition: used Scope of delivery: (see photo) (Subject to alterations and errors in the technical data. All data provided without guarantee!) If you have further questions, we will be happy to answer them by phone. Ksdpfx Asgkafijaysdw Written orders possible by email or fax.

Kondisi: bekas, LDS Type: V875 Shaker System V875-440 with SPA40K Amplifier Electrodynamic shaker for medium force applications Technical specifications: Head expander: 850 x 850 mm Armature size: 440 mm Sine force vector: 35.6 kN (peak) Random force vector: 35.6 kN (RMS) Shock force vector: 106.75 kN (peak) Frequency range: 5 to 3000 Hz Maximum specimen mass: 600 kg Maximum acceleration: 1078.7 m/s² Maximum velocity: 1.8 m/s Condition: used Weight: Shaker approx. 2200 kg Kodpfx Aajuxcpweyjdw Blower: 181 kg Amplifier: 622 kg Scope of delivery: (see photos) (Subject to technical modifications and errors in the specifications!) For further questions, we are happy to assist you by phone.

Kondisi: hampir baru (bekas), Scanlab PowerScanII 50i Aperture: 50 mm Encoder: Galvanometer scanner with analog position detector Optical wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics Number of installed tunings: 1 Typical tuning: Fast-vector tuning Tracking delay: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full scale): - 1% full scale: 1.0 ms - 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position resolution (max.):* 18 bit for XY, 16 bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hour drift (after 30 min.): - Offset: < 50 µrad - Gain: < 50 ppm Kdodpsxp Iw Hofx Aayow Electrical / Control Control: Galvanometer scanner, digital controller board Control interface (alternatives): digital SL2-100 Advanced diagnostic functions: yes (iDRIVE) Supply voltage: (48±2)V DC, max. 10 A each (20 A peak current) Mechanics Scan axes: 3-axis system with integrated varioSCAN Enclosure versions: Scan head Connector positions: opposite beam exit Weight without objective (standard housing): 35 kg Dimensions (L x W x H) (standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other features Water cooling: yes Air cooling: yes Other specifications Operating temperature: 25 °C ± 10 °C Deflection angle deviation: < 5 mrad Zero position deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in technical data. Information is provided without guarantee!) Shipping & pickup: Secure shipping on pallet (by arrangement) or local pickup possible. If you have further questions, we are happy to answer them by phone.

Kondisi: bekas, dr. wiesner Type: INTEGRA DDV -1...1 bar Product description: dr. wiesner Integra Leak Testing System The classic choice – suitable for all standard testing procedures Leak testing system for industrial tightness and flow testing applications with full-color graphical display Up to three independent test circuits can be operated simultaneously 255 test programs storable automatic process optimization autoTune (optional) Communication via flexibly interchangeable bus-coupler modules Freely programmable fixture control Freely programmable special test procedures The device is suitable for pressure and differential pressure testing with overpressure. Special versions: none Technical data: Power supply: 110 ... 230V~; 50 ... 60Hz (connection via mains cable to plug XO) Pneumatics: clean and dry compressed air max. 7 bar (to connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Gauge pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) Pneumatic interfaces: Connection for the test specimen (Test) Connection for the reference circuit (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (W x H x D) Weight approx. 15.5kg Kedpfswqm Ddex Aayjdw Condition: used (Specifications are subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, Spesifikasi teknis (Tipe produsen/model – tanpa jaminan): Daya puncak: "sesuai keterangan produsen" sekitar 10 kN Akselerasi maks.: "hingga sekitar 1.000 m/s²" Kecepatan maks.: "biasanya sekitar 1 m/s hingga beberapa m/s" Kjdpfx Ajxtdl Ieayodw Komponen: Lemari kontrol TGA 022/3 Penggetar SW 6507 Amplifier daya TG D 9000-000.00 Blower Kondisi: bekas Lingkup pengiriman: Sistem uji getaran seperti pada gambar (Perubahan dan kesalahan dalam data teknis tetap dimungkinkan!) Pertanyaan lebih lanjut dapat kami jawab dengan senang hati melalui telepon.

Kondisi: sangat baik (bekas), Sentek Type: L1024m with PA115 Technical data: Sine Max (kgf / N): 1,000 / 9,810 Random force rms (kgf / N): 1,000 / 9,810 Shock force (6 ms) kgf: 2,000 / 19,620 Usable frequency range Hz: 5-3,500 Continuous motion test pk-pk mm: 51 Shock displacement pk-pk mm: 51 Max velocity m/s: 2 Max acceleration sine peak m/s²: 980 Shaker: Shaker head diameter mm: 240 Armature insert pattern PCD mm plus 1 in center: 8-100 / 8-200 Thread M10 Resonant frequency ±5% Hz: 3,050 Max payload kg: 200 Axial natural frequency Hz: < 5 Stray flux density Gauss: < 10 Weight kg: 1,150 Dimensions (W x D x H) mm: 884 x 890 x 841 Ksdpfx Aajr A Ezzsyjdw Amplifier Dimensions (W x D x H) mm: 580 x 850 x 1,800 Amplifier weight uncrated kg: 290 Cooler Type: VAPE500/P2 Dimensions (W x D x H) mm: 620 x 710 x 1,120 Weight kg: 120 Total weight approx.: 1,540 Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data. All information is without guarantee!) If you have any further questions, we will be happy to answer them by phone.

Kondisi: baik (bekas), en-GB: Keyence Type: VR-6200 + VR-6000 Technical Data: Measurable XY range: 300 mm × 150 mm *2 Stage XY travel: 278 mm × 134 mm Z travel: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Image sensor: 4-megapixel CMOS, B/W Macro mode: Magnification (based on a 15" monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification: 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification: 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification: 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification: 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification: 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification: 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification: 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Display resolution: 0.1 μm Height measurement range Without image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image composition in Z: 0.4 μm *1 With image composition in Z: 1.0 μm *1 Measurement accuracy Without image composition in Z: ±2.5 μm *1 With image composition in Z: ±4.0 μm *1 Only 50 operating hours! With software CD, without PC! Condition: (like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (as shown!) (Changes and errors in technical data are reserved!) Please feel free to contact us by phone for further questions. Kodpfxsr Dby Io Aayjdw

Kondisi: sangat baik (bekas), MDS Type: MDS A220-PD MDS A220-PD Autoriv Manual Workstation The A220-PD assembly system is a stationary manual workstation designed for the processing of press-in fasteners. Intended Use: The machine is used to press-in fasteners. The operator manually inserts the relevant screws, plastic nuts, and the part to be processed into the machine. The pressing process is then started by the operator via a footswitch. The pressing procedure runs automatically. Fastener types: Press-in nut, rivet nut, self-piercing nut, press-in bolt, punch bolt / rivet bolt Thread sizes - M5, M6, M8, M10, M12 Technical Data: Control voltage: 230V/10A Connection plug: HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Kdedpfxetgik Rj Aayjw Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free and oil-free air Connection: 1⁄2" threaded connection Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values refer to a working height (WH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control system: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating Modes: The operating modes can be selected via the control panel. Automatic mode: Pressing of fasteners is performed in automatic mode. Movements are only activated when the operator actuates the foot pedal, thereby starting the pressing process. Manual mode: In manual mode, setup tasks can be carried out on the machine. In this mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data. All information is without guarantee!) If you have further questions, we would be pleased to answer them by telephone.

Kondisi: sangat baik (bekas), Stäubli Measuring Robot We are offering a very well-maintained Stäubli measuring robot. Measuring robotics for measuring, analyzing, and evaluating quality features. RobFlow (measuring robotics software) full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser distance sensor Model ILR 1181-30 Technical data: Measurement range: 0.1 to 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m with reflector target Linearity: ±2 mm (+15°C to +30°C), ±5 mm (-10°C to +50°C) Resolution: 0.1 mm Repeatability: ≤ 0.5 mm Response time: 100 ms to 6 s (ILR 1181-30), 20 ms to 6 s (ILR 1182-30) Laser in accordance with IEC 825-1 / EN 60825 Red 650 nm, Laser class 2, output ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature: -10°C to +50°C Storage temperature: -20°C to +70°C Applications: RobFlow is a modular system. The range of functions of the standard package can be extended with additional plugins for special tasks and customer-specific expansions. Using the available features, for example, the following applications can be implemented: Infotainment testing: • Optical and tactile inspections • Individual actuations and path movements – straight, meandering, curved segments • Analysis and evaluation functions Steering column tests: • Tactile testing along complex paths • Large measuring range due to multiple-calibrated force/torque sensor • Easy to program thanks to RobFlow Ksdpfxjfz Dhts Aaysdw Air vent end-of-line testing: • Tactile and optical inspections • Interchangeable test adapters for various devices • Automatic inspection, evaluation and marking – including integrated air leakage testing Vehicle seat testing: • Functional and tactile inspections • Headrest spacing measurements • Comfort and stiffness assessments • Lifetime and operational durability tests Benefits of RobFlow at a glance: • User-friendly operation • No programming knowledge required • Variable and dynamic test sequences • Branching sequence control • Easy exchange of test programs between development and production • Comprehensive analysis and evaluation functions • Graphical measurement data visualization and reporting • Flexible and expandable thanks to plugin architecture Stäubli Robot RX160 with 379 operating hours Controller CS8C RX160 Nominal load (charge nominale–kg): 20 kg and SP1 handheld control unit Total weight: 500 kg Type: Stäubli Robot RX160 and controller CS8C with handheld control unit, software, PC Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data. All information provided without guarantee!) For further questions, please feel free to contact us by phone.