Beli Biesse Rover 23 bekas (329)

Kondisi: sangat baik (bekas), Mesin dua sisi yang dapat ditempatkan secara in-line setelah Multi Borer tipe melalui untuk siklus proses otomatis pengeboran dan pemasangan dowel. - Programmer Elektronik "CNI" NC 400 - Kabinet kontrol dan listrik built-in - Jarak maksimum antara kepala horizontal sekitar 3200 mm - Sisi kanan mesin dapat digerakkan dan diatur (sesuai lebar panel) - 2 sabuk konveyor bermotor (0,25 HP x 2 motor) - 1+1 tangki penyimpanan dowel untuk pengumpanan otomatis ke nozle Kodpfjw Ug A Hex Aa Noll - 6+6 nozle pemasukan horizontal (injektor lem dan penekan dowel) - Sistem pengumpanan lem bertekanan tinggi - Total daya terpasang sekitar 5 kW.

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers 90° turning device for panels 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions Klsdjukhd Aepfx Aa Nel

Kondisi: sangat baik (bekas), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); Kedpfx Aot Ig A Soa Noll - 3 upper drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps + 2 continuous augers for chip extraction CNC control NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps - 2 continuous augers for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each equipped with 2 drilling heads, each with 1.8 kW motor and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction Numerical control system (software module Tooling System) for both machines. Kodpfx Aaevnq Txj Nell W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – for gluing and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction

Kondisi: sangat baik (bekas), PC control type NC 400 Kledpfxoidqd Te Aa Nol No. 2 Pass-through motorized conveyor belts No. 2 Horizontal drilling supports No. 2 Drilling units per each horizontal drilling support Spindles per each horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 Lower vertical drilling supports No. 2 Drilling units for each lower vertical drilling support No. 2 Upper vertical drilling supports No. 2 Spindles for each drilling unit of upper drilling supports No. 4 Upper vertical workpiece clamps Chip removal conveyor Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control monitors the movement (X-axis) of the horizontal drilling supports. The CNC control monitors the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the conveyor belts.

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles per drilling unit of the upper drilling supports Kjdpfoidqf Rex Aa Njll No. 5 upper vertical workpiece clamps Chip removal conveyor belt Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control regulates the movement (X-axis) of the horizontal drilling supports. The CNC control regulates the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the transport belts.

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) Klodpfx Asu Rc Anea Nsl

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Kljdpeu Rc Hyjfx Aa Nel Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), CNC-controlled electronic machine PC control system type NC 500 – Tooling System software No. 2 through-feed motorized conveyor belts – feed speed (m/min) approx. 35 – 75 No. 2 horizontal drilling supports Drilling units per horizontal drilling support (pcs.) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical drilling support (pcs.) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (pcs.) 2 x 1.8 HP Ksdpfx Aajhvi Duj Noll No. 5 upper vertical workpiece clamps No. 2 screws (endless) for chip extraction CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axis Y1 and Y2) of the drilling units CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC system manages the complete programming of automatic work cycles

Kondisi: sangat baik (bekas), PC control, type NC 400 (with software for managing work cycles) No. 2 motorized throughfeed conveyor belts Max. working width (mm): 3200 - Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Klodpsi D D Tfofx Aa Nol Spindles per horizontal drilling unit: 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit for upper drilling supports No. 2 upper vertical workpiece clamps No. 2 screws (endless) for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops OPTION: Front loader (for narrow parts: Min 60 mm - Max 260 mm)

Kondisi: sangat baik (bekas), Flexible NC-Automatiklinie zum Bohren, Fräsen und Beschlagsetzen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel-(Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC-Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC-Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC-Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch Kjdpfx Aaoidmkrj Noll KZ2054) Rollenbahn mit ebenfalls motorisierten Bändern (zum Drehen der Platten um 180° für die Übergabe an die Montagelinien)

Kondisi: bekas, Tahun pembuatan: 2020, Mesin bekas Tahun pembuatan: 2020 Perlengkapan: - Pengendalian unit melalui layar sentuh - Unit milling sambungan - Wadah lem - Unit pemotong - Unit milling radius - Unit pisau penarik radius - Unit pisau penarik permukaan - Unit pemoles - Penyemprotan depan dan belakang Lokasi: Rheinland-Pfalz Ketersediaan: Sesuai kesepakatan Kjdpfx Asx Enqusa Noll Penjualan atas nama pelanggan. Informasi tanpa jaminan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1000007687, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 1.000 mm, panjang umpan sumbu Z: 60 mm, lebar total: 4.400 mm, panjang total: 7.290 mm, daya: 20 kW (27,19 hp), kecepatan rotasi (maks.): 18.000 rpm, Deskripsi Singkat Area kerja sumbu X: 3000 mm Area kerja sumbu Y: 1000 mm Daya elektrospindle utama: 3,5 KW Jumlah sumbu terkontrol: 3 sumbu CNC untuk pengeboran fleksibel Jenis pekerjaan: Pengeboran, Area kerja sumbu X: 3000 mm Area kerja sumbu Y: 1000 mm Maks. lebar panel yang bisa dilewati: 60 mm Jumlah area kerja: 2 Kjdpfx Aox I A A Rsa Noll Jumlah sumbu terkontrol: 3 Daya motor: 3,5 kW Kecepatan putar: 18.000 RPM Unit Sistem kontrol: Kontrol PC Perangkat lunak pemrograman mesin: Biesse Works Standar keselamatan: Tanda CE Jaring pelindung terpasang pada mesin Sistem keselamatan: Mat keselamatan depan Total daya terpasang: 20 KW

Kondisi: bekas, nomor mesin/kendaraan: 008030, Tipe tepi yang terpasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR, udara panas Pengefraisan join: ya Unit multifungsi: ya Klodpfx Ajwvq Hgea Nsl Kecepatan umpan maksimum: 25 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 8 unit

Kondisi: bekas, nomor mesin/kendaraan: 007848, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, hot air Jointing cutter: yes Klodpfxowkrqpe Aa Njl Multi-function unit: yes Maximum feed speed: 20 m/min Maximum panel thickness: 60 mm Working units: 8 units

Kondisi: bekas, nomor mesin/kendaraan: 007869, max-breite-des-paneels-3200-mm Kjdpfx Aaswimzys Nsll

Kondisi: bekas, nomor mesin/kendaraan: 008027, Lebar maks. yang dapat diproses: 1350 mm Ketebalan min. yang dapat diproses: 200 mm Meja kerja: tinggi tetap Karpet vakum: ya Kodpfx Aaowvq E Ao Noll Jumlah unit kerja: 4 unit

Kondisi: bekas, nomor mesin/kendaraan: 007641, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Edgebanding machine: Machine 1 Kedpfx Aewuz R Hoa Nell Max. panel width: 1200 mm Working units, right side: 8 units Working units, left side: 9 units

Kondisi: bekas, nomor mesin/kendaraan: 007913, typ-der-angebrachten-kante Kljdpfx Aaowkf Dvs Nel

Kondisi: bekas, nomor mesin/kendaraan: 007870, max-breite-panel-3200-laenge-panel-800-an-aggregate-2-injektoren -12 Kjdpfx Aowimz Hoa Noll

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Kedpol Txw Hjfx Aa Noll Maximum panel thickness: 60 mm Working units: 12 pcs

Kondisi: bekas, nomor mesin/kendaraan: 007687, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multifunction unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Kljdpfjwuz Npex Aa Nol Working units: 7 pcs

Kondisi: bekas, nomor mesin/kendaraan: 007645, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Joint trimming: yes Kodpowuz Nijfx Aa Nell Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 units

Kondisi: bekas, nomor mesin/kendaraan: 007805, max-breite-panel-3200-laenge-1200-aggregate-6-4-nc-steuerung-sei tlich Ksdsx A E Sujpfx Aa Nsll

Kondisi: bekas, nomor mesin/kendaraan: 007673, Type of edge applied: thin edge, thick edge, solid wood Gluing system: EVA Kedpfx Aewlplgoa Njll Jointing cutters: yes Multifunctional unit: yes Maximum feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs