Beli Biesse Rover 27 bekas (329)

Kondisi: sangat baik (bekas), CNC-controlled Throughfeed Boring and Dowel Inserting Line (3 machines) J06031) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps + No. 2 endless screws for chip removal J06032) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps - No. 2 endless screws for chip removal J06033) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 4 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 4 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control (Software: Tooling System + Woodmaster) Hnedpfx Ajg Urn Eea Nog CNC controls movement (X-axis and Hv) of the 2 horizontal boring units CNC controls movement (X-axis) of vertical boring units CNC controls movement (Y1 and Y2 axes) of drilling units + (Y-axis) of stops CNC controls movement (X-axis) of workpiece clamps CNC controls movement (X-axis) of conveyor belts

Kondisi: sangat baik (bekas), SINGLE-SIDED LOADING STATION Upper traverse horizontally shiftable by 180° Console table with vacuum clamps Lifting platform (internal) with motorized sheet metal roller conveyor Front safety guard for inserting plate stacks Separate control cabinet and operator panel External roller conveyor (floor-mounted) for loading plate stacks into loading station External motorized roller conveyor (receives the plates) from loading station, also equipped with belts for 90° rotation of plates. Operating capacity (cycles/min): 12-15 Plate thickness (min/max) mm: 10 - 40 Hnedpfsd Tywgox Aa Njg Min. plate dimensions mm: 250 x 320 Max. plate dimensions mm: 1200 x 3000 Total connected load kW: 11

Kondisi: sangat baik (bekas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per unit of upper drilling support (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous (endless) screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control monitors the movement (X-axis) of the horizontal drilling supports Hnsdpfsgk T Ttsx Aa Nog The CNC control monitors the movement (Y-axis) of the stops

Kondisi: sangat baik (bekas), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length/depth (Y axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (double-station gantry loader) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electro spindles ISO 30 (3.7 kW each) with tool holder magazine, 3 positions each. Center B: 2 provisions for the installation of a further 2 electro spindles 2 tool holder magazines (revolver type) with 56 positions each. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor with turner (180°, inverts with top side facing down) "RBO" Mod. Ribaltatore Hodsgvdkgspfx Aa Neng E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 spindles. Center A: 2 electro spindles ISO 30 (4.5 kW each) with 3 tool holder magazines each. Center B: 2 provisions for the installation of a further 2 electro spindles 2 tool holder magazines (chain type) with 60 positions each. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Stacking station (double-station gantry) "RBO" Mod. Advantage SC

Kondisi: sangat baik (bekas), SINGLE-SIDE DESTACKING STATION - Upper crossbeam movable by 180° (horizontal) - Console table with vacuum clamps - Lift platform (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and control panel - External roller conveyor for the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belts for transfer at 90° of the sheets Hnedpfsd Tyvxex Aa Nsg - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm 10 - 40 - Min. sheet dimensions mm 250 x 320 - Max. sheet dimensions mm 1200 x 3000 - Total connected load kW 11

Kondisi: sangat baik (bekas), Electronic control RT 483 No. 2 pass-through motorized conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit per horizontal drilling support (1 x 1.5 HP) Hnodpjfz Nansfx Aa Njg No. 20 spindles per horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles per drilling unit of upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 augers (continuous) for chip extraction Digital display of position data (axis) Total connected load (kW): 35.1 CNC control of the movement (X-axis) of horizontal drilling supports CNC control of the movement (Y-axis) of the stops

Kondisi: sangat baik (bekas), NC 400 electronic programmer Throughfeed motorised conveyor belts (qty): 2 Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Hodpfxslwqrto Aa Nong Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Upper vertical workpiece clamps (qty): 4 Continuous screws for chip removal (qty): 2 Digital display of position data (axis) Total connected load (kW): 27.7 The CNC control monitors the movement (X-axis) of the horizontal drilling supports The CNC control monitors the movement (Y-axis) of the stops The CNC controls the movement (Z-axis) of all vertical drilling supports

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in-line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam interval (mm): 500 FORMATTING UNIT (for each side): Protection cutter (pre-milling) AS 10 (5.8 kW) 2 x Hoggers DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) Hnsdpfxou Tg Uqs Aa Nsg EDGE BANDING UNIT (for each side): Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) Edge pressure section (CNC controlled). Edge magazine for rolls (6-fold) Trimming unit IT 90-S (0.3 kW x 2) 28m/min. 0 – 25°. PNEUMATIC CNC controlled multi-profile milling unit RF 30 (0.65 kW x 2) 0 – 25° Multi-function unit (radius and contour milling unit) AR 80 (0.3 kW x 2) 25 m/min – ROTAX Spindles with automatic tool change (tools with 8+8 positions) CNC controlled multi-profile scraping unit RB 30 Flat scraping unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for boards (useful height mm 80) as buffer to accelerate the working cycle

Kondisi: sangat baik (bekas), PC control system type NC 400 Deluxe Hnjdpsrm Ik Tjfx Aa Nog No. 2 through-feed motorized conveying belts No. 2 horizontal drilling supports No. 1 drilling unit per each horizontal drilling support Spindles per each horizontal drilling unit (qty.): 20 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units per each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal belts Total connected load (kW): The CNC control system regulates the movement (X-axis) of the horizontal drilling supports The CNC control system regulates the movement (Y-axis) of the stops The CNC system controls the movement (X-axis) of the conveyor belts

Kondisi: sangat baik (bekas), Complete factory for furniture production, comprising: Hedpfxeh T Dvte Aa Nong KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side moulding and edge banding line "HOMAG", comprising: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC line for drilling, milling, and hardware insertion, consisting of: Carousel loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfer modules KZ2090) Wide-belt sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with automatic infeed and stacking system "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with through-feed carcass press KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter) with stacking system "ESSE2" KZ2009) Veneer department (double-knife veneer bundle guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; veneer splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate applications KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, glue application machines, etc.), extraction systems, roller conveyors, shelf systems (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user's site and can be inspected by appointment.

Kondisi: sangat baik (bekas), Longitudinal panel saw (Splitter) for grooving and/or for cutting a single panel into two parts - Min. panel length: 500 mm - Max. panel length: 2700 mm - Min. panel width: approx. 300 mm - Max. panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Max. feed speed: 50 m/min (4 kW) - Installed total power: 43.2 kW The machine consists of the following units: POS. 1 Milling unit for grooving from below (7.4 kW), max. diameter 300 mm POS. 2 Lower scoring saw (7.4 kW), max. diameter 350 mm Hnjdpfx Asu Tqb Uoa Nsg POS. 3 Upper scoring saw (7.4 kW), max. diameter 350 mm POS. 4 Lower main saw (splitting blade) (7.4 kW), max. diameter 350 mm

Kondisi: sangat baik (bekas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC - 2 powered continuous-feed conveyor belts, feed speed up to 75 m/min Hnedew Uhbkjpfx Aa Nog - 2 horizontal drilling units (each with 2 drilling heads, 1.8 kW each, and 22 drilling spindles per head) - 5 lower drilling units (each with 2 split and reversible drilling heads, 1.8 kW each, and various drilling heads per unit) - 3 upper drilling units (each with 2 split and reversible drilling heads, 1.8 kW each, and various drilling heads per unit) - 5 upper vertical workpiece clamps - 2 endless screws for chip removal - PC control type CNI O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC - 2 powered continuous-feed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel-driving tools) - 2 lower drilling units (each with 2 split and reversible drilling heads, 1.8 kW each, and various drilling heads per unit) - 2 upper vertical workpiece clamps - 2 endless screws for chip removal

Kondisi: sangat baik (bekas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Hjdshvahhepfx Aa Neng Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection: enclosure Lateral adjustment of aggregates carrier: manual Cam spacing (mm): 500 FORMATTING UNIT (per side): Pre-milling cutter AS 10 (5.8 kW) 2 x Hogging unit DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid release agent) EDGE BANDING UNIT (per side): Edging unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°, pneumatic Multi-profile routing unit (CNC-controlled) RF 40 (1 kW x 2) 0 - 25° Multifunctional unit (radius and profile trimming) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool change (tools) 2 universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC-controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) INFEED STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. Hnsdpfjhvah Nsx Aa Nsg B) ROTATING TRANSFER UNIT (longitudinal/crosswise), with double-cone "RBO" Model GPK-1 C) Double-sided Sizing and Edge Banding Machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180° face-down) "RBO" Model Ribaltatore E) ROTATING TRANSFER UNIT (crosswise/longitudinal), with double-cone "RBO" Model GPK-2 F) OUTFEED STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Kondisi: sangat baik (bekas), Double-Sided FORMAT & EDGE BANDING MACHINE (First machine in a production line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Panel Thickness (min/max) mm: 10 - 60 Working Width (min/max) mm: 270 - 1200 Control System / Software: SINITRA Feed Speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and Noise Protection: Enclosed cabin Side Adjustment of Aggregate Carrier: Manual FORMATTING UNIT (for each side): 2 x DT 10 Pre-milling Units (5.8 kW each) Free space for jointing unit FS Jointing Unit ES30 + ER30 (5 kW each) 0° - 90° Universal Milling Unit Softforming SF 10 (2 x 2.4 kW) 0° - 45° Spraying Unit (for liquid release agent) EDGE BANDING SECTION (for each side): Hnjdpfxst N Ix Ro Aa Nsg Gluing Unit (Hot Melt Adhesive + Pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating Unit RP 10 Edge Pressure Zone (CNC-controlled) Pressure Roller Track (revolver) for Straight Edges and Softforming (softforming) Soft PF40 (4 Pos.) mm 800 (Guillotine CI10+CS10+RL10) - Edge Magazine for Rolls (6 positions) Milling Unit RS 10 (2 x 1.3 kW) Milling Unit Softforming RF 10/SF (2 x 0.65 kW) Multi-profile Milling Unit RF 30 (2 x 0.65 kW) Universal Milling Unit for Grooving/Rebating and Profiling FB 30 (2 x 4.5 kW) 0° - 90° Multi-profile Scraper Unit RB 30 Flat Scraper Unit RC 05 / Soft Spraying Units (for polishing liquid) + Buffing Unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), PC control type NC 400, Biesse software No. 2 through-feed motorized conveyor belts Feed speed (m/min): 35 - 75 Hnedpfx Aed Nuwiea Njg No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support: 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 screw conveyors (continuous) for chip extraction Total connected load (kW): CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Kondisi: sangat baik (bekas), CNC-controlled (automatic) throughfeed drilling line. Also suitable for NARROW PARTS, min. width 100 mm W05024F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 kW each and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); - No. 6 top vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control – PC DESK TOP (module editor) – Tooling System software W05024G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 kW each and 11 drilling spindles each); Hedpou Tp Sljfx Aa Njng - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); - No. 3 upper drilling supports (each with drilling heads, 2.3 kW each, each with various drilling heads); - No. 6 top vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable working head – Vertical table (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers to secure workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinets Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (qty.): 2 Independent horizontal drilling spindles (qty.): 36 (9+9 = 18 x 2) Hnodpfx Aeihfiioa Neg Motor power for drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) qty.: 1 Power of vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Carousel magazine, 10 tool positions

Kondisi: sangat baik (bekas), Mesin dua sisi yang dapat ditempatkan secara in-line setelah Multi Borer tipe melalui untuk siklus proses otomatis pengeboran dan pemasangan dowel. - Programmer Elektronik "CNI" NC 400 - Kabinet kontrol dan listrik built-in - Jarak maksimum antara kepala horizontal sekitar 3200 mm - Sisi kanan mesin dapat digerakkan dan diatur (sesuai lebar panel) - 2 sabuk konveyor bermotor (0,25 HP x 2 motor) - 1+1 tangki penyimpanan dowel untuk pengumpanan otomatis ke nozle - 6+6 nozle pemasukan horizontal (injektor lem dan penekan dowel) Hnodpfxjw Ug A Ho Aa Neg - Sistem pengumpanan lem bertekanan tinggi - Total daya terpasang sekitar 5 kW.

Kondisi: sangat baik (bekas), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps + 2 continuous augers for chip extraction CNC control NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); Hedot Ig A Sopfx Aa Neng - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps - 2 continuous augers for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers 90° turning device for panels 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Hnjdpfxsukhd Ae Aa Nog Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions

Kondisi: sangat baik (bekas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min Hedpfxsvnq Txo Aa Nsng - 2 horizontal drilling units (each equipped with 2 drilling heads, each with 1.8 kW motor and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction Numerical control system (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – for gluing and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 Pass-through motorized conveyor belts No. 2 Horizontal drilling supports No. 2 Drilling units per each horizontal drilling support Spindles per each horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Hnjdeidqd Topfx Aa Nog No. 5 Lower vertical drilling supports No. 2 Drilling units for each lower vertical drilling support No. 2 Upper vertical drilling supports No. 2 Spindles for each drilling unit of upper drilling supports No. 4 Upper vertical workpiece clamps Chip removal conveyor Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control monitors the movement (X-axis) of the horizontal drilling supports. The CNC control monitors the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the conveyor belts.

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles per drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip removal conveyor belt Digital display of position data (axis) Hsdpfxeidqf Rs Aa Nsng Total connected load (kW): 59.1 The CNC control regulates the movement (X-axis) of the horizontal drilling supports. The CNC control regulates the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the transport belts.

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Hnjdsu Rc Anopfx Aa Njg 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)