Beli Combima bekas (45)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Lini edgebanding lengkap IMA Combima dengan stasiun pemuatan ini diproduksi pada tahun 2002. Mesin edge bander dua sisi yang kokoh ini memiliki lebar kerja 235 hingga 2600 mm dan panjang kerja 200 hingga 2600 mm. Mampu beroperasi dengan kecepatan 10 hingga 40 m/menit, mesin ini dilengkapi dengan unit milling jointing, unit lem semi-otomatis dengan majalah edge 6 buah, serta unit pemangkasan lurus dan profil. Pertimbangkan kesempatan untuk membeli edge bander dua sisi IMA Combima ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Gijdpfx Aex D Iq Nsh Rsp Jenis Aplikasi Edgebanding

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) Gedpeyttrxsfx Ah Rjip TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. The robust double-sided edge banding machine features a maximum feed width of 3,300 mm and processes workpiece thicknesses up to 60 mm. Equipped with the precise ICOS OPEN control system, it supports both roll and strip edge materials. Ideal for high-throughput environments that require flexibility and reliability in edge processing. Please contact us for further information about this machine. Gisdpfex D I D Aox Ah Rjp Additional equipment • Gluing unit for hot-melt adhesive: single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm • End trimming unit: 2 motors, each 660 W, pneumatically tiltable 0° + 25° Machine advantages Technical machine advantages • Min. infeed width: 244 mm (during longitudinal processing) • Max. feed width: 3,300 mm • Max. workpiece width (with chain conveyor extension): 1,300 mm • Min. workpiece thickness: 8 mm • Max. workpiece thickness: 45 mm (with copying function) / 60 mm (without copying function) • Max. feed width: 3,300 mm • Fixed reference side: left in feed direction Additional information Scoring saw: 22 kW motor, 6,000 rpm, pneumatically controlled Rough trimming unit: 80 kW motor, 6,000 rpm Double trimming unit: 2 motors, each 45 kW, 9,000 rpm Flush trimming unit: 2 motors, 1,850 W, 12,000 rpm Multi-function unit: NC-controlled with 2 motors, automatic tool changer for 4 profiles Buffing unit: 2 motors, each 180 W, 1,400 rpm Grooving unit: 45 kW motor, 9,000 rpm Control unit ICOS OPEN: PC-based control system with integrated PLC and electronic track control, user-friendly interface with Windows standards

Kondisi: sangat baik (bekas), COMPLETE 4-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /440 /A /R3 B) Rotation Station (90°) Gjdpfx Asun N Dljh Reip C) W06028 2nd Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /190 /B /R3

Kondisi: sangat baik (bekas), translation-001 Gedswz Ic Aspfx Ah Rjip

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge material (thickness, min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Protective and soundproof cabins FORMATTING UNIT (each side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (slot no.): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°-30° Giodpsunrwnefx Ah Rjp Milling unit 08.055 (2 x 0.66 kW) 0°-30° Profile scraping unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving/rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°-180°

Kondisi: bekas, nomor mesin/kendaraan: 006619, 1 Giedpfx Ajqy Em Nsh Rsp

Kondisi: bekas, nomor mesin/kendaraan: 007857, translation_de-hu-it-lt-001 Gedpfxowuuf Do Ah Reip

Kondisi: bekas, nomor mesin/kendaraan: 005854, Jenis tepi yang digunakan: tepi tipis, tepi tebal Sistem lem: EVA Unit multifungsi: ya Mesin pelapis tepi: Mesin 1 & 2 Lebar panel maks: 3300 mm Kecepatan maju maks: 30 m/menit Gisdpsv Hinxefx Ah Rop Unit kerja, sisi kanan: 11 unit Unit kerja, sisi kiri: 11 unit

Kondisi: bekas, nomor mesin/kendaraan: 006561, Jenis tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA Mesin pelapis tepi: Mesin 1 Lebar maksimum panel: 2800 mm Unit kerja, sisi kanan: 11 unit Gedpfx Aoqa Rxash Rjip Unit kerja, sisi kiri: 11 unit

Kondisi: bekas, nomor mesin/kendaraan: 006017, Posisi 1: Gudang vertikal IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 2: Gergaji panel tipe sudut IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 3: Loader IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 4: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110 Gisdpfxjwukzhs Ah Rep Posisi 5: Mesin pelapis tepi Batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 6: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 7: Mesin pelapis tepi Batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 8: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 9: Mesin pelapis tepi Batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 10: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 11: Mesin pelapis tepi Batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Posisi 12: Pemindahan IMA-COMBIMA SYSTEMS/N/I/R75/1110

Kondisi: bekas, nomor mesin/kendaraan: 005635, pl-lt-hu-it-nl-lv-nb Gsdpewuudyefx Ah Rsip

Kondisi: bekas, nomor mesin/kendaraan: 007514, Position 1: Transfer IMA-COMBIMA SYSTEM I Position 2: bordatriceLottoUno IMA-COMBIMA SYSTEM I Giodpewukznsfx Ah Rsp Position 3: Transfer IMA-COMBIMA SYSTEM I Position 4: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 5: Transfer IMA-COMBIMA SYSTEM I Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 7: Transfer IMA-COMBIMA SYSTEM I Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 9: Transfer IMA-COMBIMA SYSTEM I

Kondisi: bekas, nomor mesin/kendaraan: 005642, Mesin pelapis tepi dua sisi IMA + MEINERT-COMBIMA/II/650/A/R3 Giedpfxjwuciwe Ah Rjp

Kondisi: bekas, nomor mesin/kendaraan: 008269, Position 1: Lader IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Gsdpfx Aex A Hggeh Rsip Position 2: Plattenwender IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Doppelseitige Kantenanleimmaschine IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Plattenwender IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Entlader IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Kondisi: bekas, nomor mesin/kendaraan: 007840, de-1 Godpfxoyg Eg Ij Ah Roip

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Gsdjd Nt Rqjpfx Ah Rsip Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Gijdpfx Aedh Tfgeh Rop Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Kondisi: sangat baik (bekas), de_hu_001 Giedpoxggthsfx Ah Rjp

Kondisi: diremajakan ulang (bekas), Single-sided FORMAT PROCESSING and EDGE BANDING MACHINE (LEFT SIDE) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Gisdjcr T N Dopfx Ah Rjp Edging thickness in battens/strips (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/software: IMATRONIC 121 /01 Feed speed (adjustable) m/min: 6 - 30 FORMAT PROCESSING: Jointing cutter unit with CN control 08.376 (2 x 4.5 kW) Spraying unit (for liquid anti-stick agent) EDGE BANDING SECTION: Lamps for heating workpiece edges Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for rolls (compartment No. 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0–25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°–30° + spraying unit (for sliding fluid) Contour milling unit (for fine milling), CN-controlled 08.348 (2 x 0.66 kW) Multi-profile scraper unit (CN-controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edge WI (4 x 0.75 kW)

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a machine line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open (Windows-based) Without transfer rail (master & slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (the panels fall directly onto the motorized chain conveyors) Cam interval (mm): 270 FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Protection cutter (pre-milling) 75.186 (1 x kW 4.4) Godpeum Untefx Ah Reip Milling unit (2 x kW 6.6) Free position EDGE PROCESSING (for each side): Edgebanding unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 0.66) 30 m/min Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-2 (2 x kW 0.18) Free position

Kondisi: sangat baik (bekas), KOMPLETTE_DOPPELSEITIGE_FORMAT-UND_KANTENANLEIMMASCHINEN Giedpoxftt Eofx Ah Rjp

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edging material (thickness min/max) mm: 0.3 / 3 – Maximum edge thickness in laths/strips mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Safety and soundproof cabins Panel processing (for each side): - Pre-milling unit 75.186 (1 x 4.4 kW) - Multi-blade cutting unit (2 x 6.6 kW) Max. 35 m/min - Jointing cutter unit 75.186 (1 x 4.4 kW) Edgebanding section (for each side): - Gluing unit (PUR glue + pre-melter) VTG 3-24 + 283.203 - Pressure zone + edge magazine for rolls (compartment no. 24) - End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) - Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) - Multifunctional unit (radius milling + profile milling unit) MFA 08.342 (2 x 0.66 kW) SERVO Max. 20 m/min - OPTIONAL: KFA 30 - Profile scraping unit 08.519 - Flat scraping unit 08.521 - Spraying unit (for polishing fluid) - Buffing unit 08.604 (0.25 kW x 4) - 2 x standard milling units for grooving/rebating (1 left + 1 right) 08.190 (4.5 kW x 2) 90°/180°/270° Gsdpexggzlsfx Ah Rsip

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a processing line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transfer bar (Master & Slave systems) Safety and noise protection enclosure Retractable stops, spacing (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing station (P.U.R. adhesive + pre-melter) 04.1570 + 283.205 Gsdpfxefi Tkvo Ah Rsip Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°–30° Multifunction unit (radius milling and contour trimming) MFA 08.342 (0.66 kW x 2) max. 25 m/min Contour milling unit (copier) 08.465 (0.18 kW x 4) max. 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free position

Kondisi: sangat baik (bekas), Double-sided edge banding and formatting machines – First (1st) machine in the line Edge thickness in rolls (min/max) mm Edge thickness in strips/bands (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (Master & Slave systems) Top pressure driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) Gijdpofi Tkgefx Ah Rop EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and formed edges (softforming) mm 1,050 Edge magazine for rolls (magazine slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Flat scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)