Beli Biesse Rover 321 R bekas (311)

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Fpodsukhd Ajpfx Aaged Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers 90° turning device for panels 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Fsdpfju Rc Anjx Aagepd Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) Fodpfx Asu Rc Hysagopd FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), Flexible NC-Automatiklinie zum Bohren, Fräsen und Beschlagsetzen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel-(Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC-Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC-Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC-Modell Idrak 3 Fsdpsidmkrjfx Aagepd KZ2053) Übergabe mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn mit ebenfalls motorisierten Bändern (zum Drehen der Platten um 180° für die Übergabe an die Montagelinien)

Kondisi: bekas, Tahun pembuatan: 2020, Mesin bekas Fedpfx Aaex Enquogopd Tahun pembuatan: 2020 Perlengkapan: - Pengendalian unit melalui layar sentuh - Unit milling sambungan - Wadah lem - Unit pemotong - Unit milling radius - Unit pisau penarik radius - Unit pisau penarik permukaan - Unit pemoles - Penyemprotan depan dan belakang Lokasi: Rheinland-Pfalz Ketersediaan: Sesuai kesepakatan Penjualan atas nama pelanggan. Informasi tanpa jaminan.

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0008932 - Manufacturer Code: DRG4425 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested, we offer an overhaul service, please contact us. Fedpfx Aev Hp Avsagjpd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 1.300 mm, panjang benda kerja (maks.): 3.200 mm, ketebalan tepi (maks.): 3 mm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Min. panel height: 10 mm Max. panel height: 60 mm Min. panel length: 320 mm Max. panel length: 3,200 mm Min. panel width: 150 mm Max. panel width: 1,300 mm Min. edge thickness: 0.3 mm Max. edge thickness: 3 mm Number of working units: 8 UNITS Unit Trimming 1 Unit: Corrections Model: RT30 Motor power: 3.5 kW Max. speed: 9,000 rpm Fjdpfxsxw T Tpo Aagjpd Edge processing unit 1 Unit: End trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge processing unit 4 Unit: Edge scraper Model: RB40 Edge processing unit 5 Unit: Glue scraper Model: RC20 Edge processing unit 6 Unit: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing unit Multifunction unit Top pressure Pressure with rubber-coated belts Panel support guide NC positioning Panel introduction system at angle Automatic engagement by timing Edge heating lamps Coil magazine Glue pot for hot melt adhesive Prefuser for hot melt adhesive Edge pressure roller track Spraying unit Machine programming software: SINTRA Panel ejection with transfer roller conveyor Panel feed with motorized conveyor belt Return conveyor for edgebander left CE marking

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 36956, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 3 mm, panjang total: 9.800 mm, berat keseluruhan: 600 kg, tinggi pelat: 1.060 mm, RINCIAN TEKNIS Tinggi benda kerja: 60 mm Ketebalan tepi: hingga 3 mm Lebar panel minimum: 55 mm Panjang panel minimum: 100 mm Tinggi panel: 1.060 mm Tipe dudukan alat: ISO 30 DETAIL MESIN Fpsdpfx Aaox A Tzqeged Dimensi & Berat Panjang total: 9.800 mm Berat: 600 kg Frekuensi input: 50 Hz PERLENGKAPAN Sistem pengembalian Bekerja dengan lem PUR Sistem penyemprotan Unit pra-pemotongan RT 20 Unit lem SP 20 Majalah tepi 6 posisi Unit pemangkasan akhir IT 90-S Unit rough-milling RS 10 Unit trimming halus RF 40 Catatan: Informasi lebih lanjut mengenai perlengkapan tersedia pada kartu mesin terlampir.

Kondisi: baik (bekas), de Fedpfexqntdjx Aagepd

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, automatic edge banding machine model BIESSE AKRON 245 Used machine CE-compliant: Yes Includes operating manuals Suitable for edging wood, PVC, veneer, melamine, and ABS for furniture, fittings, kitchens, bathrooms, doors, panels, and more NC 321 electronic positioner Technical Data: - Min. panel height to be edge-banded: 10 mm - Max. panel height to be edge-banded: 45 mm - Min. tape edge thickness: 0.4 mm - Max. tape edge thickness: 3 mm - Max. solid wood edge thickness: 8 mm - Min. panel width: 50 mm - Min. panel length: 150 mm - Feed speed motor power: 2 HP - Electric pressure beam lift - Telescopic support for large panels - Sound insulation cabin Fpsdpfx Aaegipk Ajged Configuration: - Gluing unit with glue pot - Pressure rollers - Edge feeding system - End trimming unit for vertical cutting of excess edge, front and rear, with 2 motors - Top/bottom trimming unit for trimming upper and lower excess edge, with 2 motors - Tiltable top/bottom trimming unit for final trimming of upper and lower excess edge, with 2 motors - Glue scraper unit for removal of glue residues - Overlapping brushing unit for brushing and polishing applied edges, with 2 tiltable motors - Air pressure: 7-8 bar - Weight: 1700 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, stapelanlage-biesse-rbo-winner-sc-2004 Fsdpfoxyah Ssx Aagopd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Robot KuKa dengan peralatan penanganan Biesse RBO. Dibuat oleh Biesse - RBO - Meja untuk penunjukan titik referensi - Balok sepanjang 4 meter dengan kereta untuk pergerakan pada arah X, sejajar dengan sumbu X mesin - Sistem vakum Schmaltz - Kabinet listrik terpisah untuk robot dan kabinet listrik lain untuk penanganan RBO Sel robot ini terhubung ke mesin Biesse Rover hingga 10.11.2025, untuk penanganan panel masuk dan keluar dari mesin. Semua fungsi robot 100% operasional. Penjualan karena penutupan pabrik. Silakan lihat video terlampir. Fodpfx Ajxy Afteagspd Rekman Maskin & Service - layanan mesin CNC sejak 1986.

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machine for gluing and processing straight panel edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, knife-cut veneers, etc.) • NC control with touchscreen display • Automatic start of unit motors. • Direct selection for second pass. • Production data acquisition. • Software-guided maintenance. TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU unit (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material) (*): 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Fpsdpfjxzb Iijx Aaged Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air: 7 bar Glue pot capacity: approx. 2 kg * Depending on selected units. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge material to the workpiece, automatically cuts the edge from the coil, and presses it onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming front and rear edge projections at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made from synthetic materials up to max. 3 mm thickness. PRE-MILLING UNIT RT02 Prepares the workpiece prior to glue application. Equipped with two 1.8 kW high-frequency motors running at 12,000 rpm. SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. GLUE JOINT SCRAPER RC02 Unit for removing excess adhesive in the transition area between the edge and the panel. Equipped with tracing rollers and a flat knife with insertion control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using cloth polishing wheels. The unit automatically adjusts to the workpiece thickness. ANTI-ADHESIVE SPRAY SYSTEM ADZ02 Precision application of anti-adhesive via injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing via: - controlled monitoring of the glue roller - automatic retraction at feed stop - automatic ON/OFF of the gluing unit REVERSE system for switching the glue roller between forward and reverse operation. Electrical and mechanical preparation for use of special glue pots for POLYURETHANE adhesive in machines configured for EVA glue. NC axis for the fine trimming unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface. Pair of multi-profile cutters for fine trimming unit: 25-degree chamfer cutter, R=2 mm + R=1 mm, and straight profile for solid wood. NC axis for the profile milling unit Kit for automatic setting of the sensor according to edge thickness. Adjustment is controlled via the operator interface. Function for corner-only processing NC axis for the scraper unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 50 kg, tinggi benda kerja (maks.): 900 mm, panjang benda kerja (maks.): 2.600 mm, kedalaman pengeboran: 25 mm, kecepatan spindel (maks.): 24.000 rpm, TECHNICAL DETAILS Workpiece Dimensions Length min: 200 mm Length max: 2,600 mm Height min: 35 mm Height max: 900 mm Thickness min: 8 mm Thickness max: 60 mm Maximum panel weight: 50 kg Length with extension: max. 3,200 mm Drilling Head Unit BH17 Vertical chucks: 10 Horizontal double chucks: 3 Circular saw blade diameter: 120 mm Max. working depth: 25 mm Saw blade thickness: 4 mm Rotation: clockwise Electrospindle Power at 12,000 – 15,000 rpm (S1): 5.5 kW Speed range: 1,000 – 24,000 rpm Rotation: clockwise EQUIPMENT Fpedpfx Aasw Hqrkogod BSolid Software – 3D CAD-CAM design software (simulation and management of processes for machining and drilling centers, option to select additional modules for extended functions according to production requirements) Note: Disassembly and loading can be offered by a Biesse service partner for €2,000.

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: 100007528, Fungsionalitas: berfungsi sepenuhnya, daya: 13 kW (17,68 hp), jenis arus masuk: tiga fasa, tinggi total: 1.700 mm, panjang total: 9.000 mm, lebar total: 3.000 mm, Biesse Akron 1440 A dengan meja pengembalian otomatis dan konveyor, pot lem PUR. Dikendalikan NC, pre-miller, pagar, pemotong radius, dan scraper. Ketebalan edging dapat dipilih dari PC dengan pengaturan otomatis. Pengiriman dapat diatur di Republik Irlandia. Fpedpfxexmi E He Aagsd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Digital automatic drilling machine BIESSE SKIPPER 130 In working condition. Ready for loading. Fedsrkm R Hopfx Aagspd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 80709, Fungsionalitas: berfungsi sepenuhnya, berat kosong: 2.900 kg, kecepatan operasi: 333 mm/dtk, tinggi pelat: 45 mm, Perlengkapan: Penandaan CE, DETAIL TEKNIS Ketebalan papan maks.: 45 mm Ketebalan pita: 13-60 mm Ketebalan material tepi gulungan maks.: 3 mm Lebar panel minimum: 50 mm Panjang minimum: 150 mm Kecepatan kerja: 10 - 20 m/menit DETAIL MESIN Data listrik Tegangan: 400 V Frekuensi: 50 Hz Dimensi & Berat Dimensi (P x L x T): 4.950 mm x 1.700 mm x 1.530 mm Berat: 2.900 kg PERLENGKAPAN Pot lem VC 700 Unit pemotong 701 Unit frais pinggir RS 700 Unit pembulatan sudut CR 200 Unit frais pinggir miring + chamfer RI 700 Pisau penyerut tepi kompak RBK501 Sikat SP700 Unit pengamplas tepi LV 700 Pemandu masuk berpemanas Kontrol PLC Pemandu penyangga papan Penahan gulungan diameter besar Fpodpoxuqufsfx Aagjd Unit pemotong tepi untuk pita gulung tebal 3 mm Penandaan CE

Kondisi: bekas, Tahun pembuatan: 1997, - Edge banding unit Fpsdpsd Inktefx Aagod - Cross-cutting unit - Milling unit - Fine milling unit - Scraper - Buffing unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, en-001 Fjdpfx Aaet N Rkvsgepd

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, I am selling a CNC dowel drilling machine with dowel insertion unit, BIESSE COMIL INSIDER KT2, year of manufacture 1999. - 2 x CNC drilling heads from above - 1 x groove saw Fodpfxet N Hmms Aagopd - 3 x 3Master vibratory dowel insertion units This unit is part of a Biesse production line consisting of: COMIL Insider dowel boring – milling – grooving – dowel insertion – glue application – accessory insertion – complete line Year of manufacture: 1999–2001. The machines can also be sold separately. Vibratory dowel hoppers and powered conveyors included in the offer. For more photos and details, please send an inquiry.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, I am selling a CNC dowel drilling machine with dowel insertion unit, BIESSE COMIL INSIDER KTC, year of manufacture 2002. - 2 pcs. CNC drilling heads from the side - 1 pc. glue injection head - 3 pcs. 3Master vibratory dowel insertion units Fpodpfx Aajt N Rixjgod These are part of a Biesse production line consisting of: COMIL Insider dowel drilling - milling - grooving - dowel insertion - glue application - accessory insertion - line Manufacture years: 1999-2001. It is possible to sell the machines separately. Vibratory feeder and motorized conveyor included in the offer. For more photos and details, please send us an inquiry.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, I am selling a CNC accessory inserting machine with glue injection: BIESSE COMIL INSIDER IT2G, year of manufacture 2001. Fpedpfx Aaot N N Aqjgsd Includes: - 2 pcs. CNC drawer slide insertion units from above - 6 pcs. glue injection heads - 1 pc. vibration accessory insertion unit These are parts of a Biesse production line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue injection - accessory insertion - line Year of manufacture: 1999-2001 It is possible to buy the machines individually. Vibration dispensers and motorized conveyors can be included in the contract. For more photos and details, please send an inquiry.

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), I am offering for sale a Biesse production line consisting of: - COMIL Insider dowel insertion machine - Drilling, grooving, dowel insertion, glue application, accessory insertion units - Complete line Year of manufacture: 1999-2001. It is possible to sell the machines separately. Vibration feeders and motorised conveyors are included in the offer. Fpsdpfx Aaod Iv H Reged For more photos and details, please send an enquiry.

Tahun pembuatan: 1982, Kondisi: baik (bekas), BIESSE – Multi-Spindle Drilling Machine Model: BEAVER Year: 1982 Manufacturer: Biesse S.p.A, Italy S/N: 312/82 Technical Specifications Fsdpfx Aaefriztogjpd - 1 horizontal drilling unit, 21 spindles - 2 vertical drilling units, 2 x 10 spindles, 32 mm pitch horizontal - Drilling motor: 2.2 kW - Vertical drilling motor: 2 x 1.5 kW - Spindle speed: 2800 rpm - Blade dimensions: 10 x 1.5 mm - Operating pressure: 0–6 MPa - 7 pneumatic clamps with manual control levers - Weight: 865 kg Dimensions (L x W x H): 280 cm × 150 cm × 150 cm

Tahun pembuatan: 1999, Kondisi: baik (bekas), Edge Bander Biesse Polymac ERGHO 5, year of manufacture 1999 Biesse Italy S/N 80709 Max. panel thickness: 10–45 mm Min. and max. edge band thickness: 13–60 mm Max. thickness of edging material (roll): 0.4–3 mm Min. panel width: 50 mm Min. panel length: 150 mm Feed speed: 10/20 m/min Technical specifications: - Glue pot VC 700 - End trimming unit 701 - Edge trimming unit RS 700 - Corner rounding unit CR 200 - Tilting trimming unit + chamfering RI 700 - Compact scraper RBK501 - Buffing unit SP700 - Edge sanding unit LV 700 Features: - Heated infeed guide - PLC control - Panel support guide - Large-diameter roller holder - Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz Fodjgtx Aqjpfx Aagspd CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg