Beli Biesse bekas (332)

Kondisi: sangat baik (bekas), COMPLETE DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (including SOFTFORMING), with throughfeed drilling machines, splitter, and high-speed automatic conveying technology. Configured as follows: A) Infeed station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) B) 1st double-sided formatting and edge banding machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided formatting and edge banding machine "BIESSE" Model Stream SB2 9.5 Lredjttgy Hopfx Agleg E) 2nd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) G) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) H) 3rd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Outfeed unstacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)

Kondisi: sangat baik (bekas), Double-sided processing machine Can be positioned after a through-feed drilling line (for automatic processing cycle of drilling and doweling) Electronic control unit: Programmer RT 486 Through-feed motorized conveyor belts (No.) 2 Horizontal drilling supports (No.) 2 Dowel driving systems (with glue injection system) No. 6 LH + 6 RH Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Lower vertical drilling supports (No.) 4 Drilling units for each lower vertical drilling support (No.): 2 x 1.8 HP Lredpfxodi R R Re Agleg Upper vertical workpiece clamps (No.) 2 Total connected load (kW): 11.5

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum System (with pump) No. 2 vertical support columns for the upper carrying beam No. 2 horizontal upper carrying beams (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups OPTIONAL: No. 2 ext. roller conveyors (on the floor) for loading stacks of panels onto the feeding station No. 1 ext. motorized roller conveyor (for receiving panels from the feeding station) Separate electrical control panel Electronic control system Lrjdpfx Aeflc T Seglsg Perimeter safety fence with safety mats Total connected load: 17.7 kW Operating capacity (cycles/min): approx. 16-20 Panel thickness (min/max): 10–50 mm (approx.) Min. panel dimensions: approx. 250 x 320 mm Max. panel dimensions: approx. 1200 x 3000 mm

Kondisi: sangat baik (bekas), DOUBLE-SIDED DESTACKING - Bridge Vacuum system (with pump) No. 2 vertical columns for the upper support beam No. 1 horizontal upper support beam (carriage travels on this) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 external roller conveyors for stacking panels from destacking No. 1 external motorized roller conveyor for destacking, also fitted with belts for 90° panel transfer. Dimensions: 7168 mm (approx.) Separate electrical control panel OMRON electronic control system Ljdod Rg Dzjpfx Aglorg Perimeter safety fencing with safety mats Working capacity (cycles/min): approx. 16 – 20 Panel thickness (min/max): approx. 10 – 50 mm Min. panel dimensions: approx. 250 x 320 mm Max. panel dimensions: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Separate electrical and control panel OMRON electronic control Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Lrjdpfsd Rg Dpsx Aglog Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit Lrsdpjcggy Sofx Aglog - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: bekas, Complete factory for furniture manufacturing, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Mod. GammaDue (3800x2200 mm) SZ0M26) Panel saw (multi-blade) "GABBIANI" (finished panels 4250 x 2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) Lredecr U Urepfx Aglsg SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper / veneer / laminated SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper / veneer / laminated SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with second double-sided sizing and edge banding machine "STEFANI" and "TOMASSINI" handling. SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with "NARDELLO" Mod. Elegance splitter. SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining centre "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and rewinding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Honeycomb panel preparation line SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (mm??x mm ??). SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Various other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelving (wall racks), forklift trucks, pallet trucks, and more. The machines are still installed at the user and can be inspected by arrangement.

Kondisi: sangat baik (bekas), CNC-controlled (automatic) drilling and dowel inserting line, consisting of: VZ0250A) "RBO" Tornado C 1300 INFEED STATION with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 motorized throughfeed belts, feed rate up to 75 m/min - 2 horizontal drilling units (each equipped with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 4 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and differing drilling heads) - 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and differing drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction CNC control NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT, with CNC - 2 motorized throughfeed belts, feed rate up to 75 m/min - 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel inserting tools) - 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and differing drilling heads) - 2 upper vertical workpiece clamps Lsdpfx Ajd Nviqegljrg - 2 (endless) screws for chip extraction VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Model GP 11 VZ0250E) STACKING STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Kondisi: sangat baik (bekas), CNC-controlled Throughfeed Boring and Dowel Inserting Line (3 machines) J06031) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps + No. 2 endless screws for chip removal J06032) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) Lrsdpfx Aog Urn Eogljg - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps - No. 2 endless screws for chip removal J06033) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 4 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 4 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control (Software: Tooling System + Woodmaster) CNC controls movement (X-axis and Hv) of the 2 horizontal boring units CNC controls movement (X-axis) of vertical boring units CNC controls movement (Y1 and Y2 axes) of drilling units + (Y-axis) of stops CNC controls movement (X-axis) of workpiece clamps CNC controls movement (X-axis) of conveyor belts

Kondisi: sangat baik (bekas), SINGLE-SIDED LOADING STATION Upper traverse horizontally shiftable by 180° Console table with vacuum clamps Lifting platform (internal) with motorized sheet metal roller conveyor Ledpfjd Tywgsx Aglsrg Front safety guard for inserting plate stacks Separate control cabinet and operator panel External roller conveyor (floor-mounted) for loading plate stacks into loading station External motorized roller conveyor (receives the plates) from loading station, also equipped with belts for 90° rotation of plates. Operating capacity (cycles/min): 12-15 Plate thickness (min/max) mm: 10 - 40 Min. plate dimensions mm: 250 x 320 Max. plate dimensions mm: 1200 x 3000 Total connected load kW: 11

Kondisi: sangat baik (bekas), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length/depth (Y axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (double-station gantry loader) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electro spindles ISO 30 (3.7 kW each) with tool holder magazine, 3 positions each. Center B: 2 provisions for the installation of a further 2 electro spindles 2 tool holder magazines (revolver type) with 56 positions each. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor with turner (180°, inverts with top side facing down) "RBO" Mod. Ribaltatore E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 spindles. Lodogvdkgspfx Aglsrg Center A: 2 electro spindles ISO 30 (4.5 kW each) with 3 tool holder magazines each. Center B: 2 provisions for the installation of a further 2 electro spindles 2 tool holder magazines (chain type) with 60 positions each. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Stacking station (double-station gantry) "RBO" Mod. Advantage SC

Kondisi: sangat baik (bekas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Lrsdpfx Asgk T Ttjglog Spindles per unit of upper drilling support (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous (endless) screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control monitors the movement (X-axis) of the horizontal drilling supports The CNC control monitors the movement (Y-axis) of the stops

Kondisi: sangat baik (bekas), SINGLE-SIDE DESTACKING STATION - Upper crossbeam movable by 180° (horizontal) - Console table with vacuum clamps - Lift platform (internal) with motorized sheet metal roller conveyor Lrjdsd Tyvxepfx Aglog - Front safety guard, movable - Separate control cabinet and control panel - External roller conveyor for the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belts for transfer at 90° of the sheets - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm 10 - 40 - Min. sheet dimensions mm 250 x 320 - Max. sheet dimensions mm 1200 x 3000 - Total connected load kW 11

Kondisi: sangat baik (bekas), Electronic control RT 483 No. 2 pass-through motorized conveyor belts Feed speed (approx. 55 m/min) Lrsdpfx Asfz Nanegljg No. 2 horizontal drilling supports No. 1 drilling unit per horizontal drilling support (1 x 1.5 HP) No. 20 spindles per horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles per drilling unit of upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 augers (continuous) for chip extraction Digital display of position data (axis) Total connected load (kW): 35.1 CNC control of the movement (X-axis) of horizontal drilling supports CNC control of the movement (Y-axis) of the stops

Kondisi: sangat baik (bekas), NC 400 electronic programmer Throughfeed motorised conveyor belts (qty): 2 Horizontal drilling supports (qty): 2 Lrsdpfxelwqrte Agljg Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Upper vertical workpiece clamps (qty): 4 Continuous screws for chip removal (qty): 2 Digital display of position data (axis) Total connected load (kW): 27.7 The CNC control monitors the movement (X-axis) of the horizontal drilling supports The CNC control monitors the movement (Y-axis) of the stops The CNC controls the movement (Z-axis) of all vertical drilling supports

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in-line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam interval (mm): 500 FORMATTING UNIT (for each side): Protection cutter (pre-milling) AS 10 (5.8 kW) 2 x Hoggers DT 10 (5.8 + 5.8 kW) Lrsdpfxsu Tg Uqj Agljg Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) Edge pressure section (CNC controlled). Edge magazine for rolls (6-fold) Trimming unit IT 90-S (0.3 kW x 2) 28m/min. 0 – 25°. PNEUMATIC CNC controlled multi-profile milling unit RF 30 (0.65 kW x 2) 0 – 25° Multi-function unit (radius and contour milling unit) AR 80 (0.3 kW x 2) 25 m/min – ROTAX Spindles with automatic tool change (tools with 8+8 positions) CNC controlled multi-profile scraping unit RB 30 Flat scraping unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for boards (useful height mm 80) as buffer to accelerate the working cycle

Kondisi: sangat baik (bekas), Longitudinal panel saw (Splitter) for grooving and/or for cutting a single panel into two parts - Min. panel length: 500 mm - Max. panel length: 2700 mm Lodpju Tqb Uefx Agljrg - Min. panel width: approx. 300 mm - Max. panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Max. feed speed: 50 m/min (4 kW) - Installed total power: 43.2 kW The machine consists of the following units: POS. 1 Milling unit for grooving from below (7.4 kW), max. diameter 300 mm POS. 2 Lower scoring saw (7.4 kW), max. diameter 350 mm POS. 3 Upper scoring saw (7.4 kW), max. diameter 350 mm POS. 4 Lower main saw (splitting blade) (7.4 kW), max. diameter 350 mm

Kondisi: sangat baik (bekas), PC control system type NC 400 Deluxe No. 2 through-feed motorized conveying belts No. 2 horizontal drilling supports No. 1 drilling unit per each horizontal drilling support Spindles per each horizontal drilling unit (qty.): 20 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units per each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal belts Total connected load (kW): The CNC control system regulates the movement (X-axis) of the horizontal drilling supports The CNC control system regulates the movement (Y-axis) of the stops Ledsrm Ik Tspfx Aglsrg The CNC system controls the movement (X-axis) of the conveyor belts

Kondisi: sangat baik (bekas), Complete factory for furniture production, comprising: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side moulding and edge banding line "HOMAG", comprising: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC line for drilling, milling, and hardware insertion, consisting of: Carousel loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfer modules KZ2090) Wide-belt sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with automatic infeed and stacking system "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with through-feed carcass press KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter) with stacking system "ESSE2" KZ2009) Veneer department (double-knife veneer bundle guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; veneer splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate applications KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, glue application machines, etc.), extraction systems, roller conveyors, shelf systems (wall racks), forklifts, pallet trucks, and more. Ledpfxeh T Dvts Aglerg The machines are still installed at the user's site and can be inspected by appointment.

Kondisi: sangat baik (bekas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC - 2 powered continuous-feed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, 1.8 kW each, and 22 drilling spindles per head) Lrjdow Uhbkspfx Aglog - 5 lower drilling units (each with 2 split and reversible drilling heads, 1.8 kW each, and various drilling heads per unit) - 3 upper drilling units (each with 2 split and reversible drilling heads, 1.8 kW each, and various drilling heads per unit) - 5 upper vertical workpiece clamps - 2 endless screws for chip removal - PC control type CNI O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC - 2 powered continuous-feed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel-driving tools) - 2 lower drilling units (each with 2 split and reversible drilling heads, 1.8 kW each, and various drilling heads per unit) - 2 upper vertical workpiece clamps - 2 endless screws for chip removal

Kondisi: sangat baik (bekas), Double-Sided FORMAT & EDGE BANDING MACHINE (First machine in a production line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Panel Thickness (min/max) mm: 10 - 60 Working Width (min/max) mm: 270 - 1200 Control System / Software: SINITRA Ljdpfxst N Ix Rs Aglorg Feed Speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and Noise Protection: Enclosed cabin Side Adjustment of Aggregate Carrier: Manual FORMATTING UNIT (for each side): 2 x DT 10 Pre-milling Units (5.8 kW each) Free space for jointing unit FS Jointing Unit ES30 + ER30 (5 kW each) 0° - 90° Universal Milling Unit Softforming SF 10 (2 x 2.4 kW) 0° - 45° Spraying Unit (for liquid release agent) EDGE BANDING SECTION (for each side): Gluing Unit (Hot Melt Adhesive + Pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating Unit RP 10 Edge Pressure Zone (CNC-controlled) Pressure Roller Track (revolver) for Straight Edges and Softforming (softforming) Soft PF40 (4 Pos.) mm 800 (Guillotine CI10+CS10+RL10) - Edge Magazine for Rolls (6 positions) Milling Unit RS 10 (2 x 1.3 kW) Milling Unit Softforming RF 10/SF (2 x 0.65 kW) Multi-profile Milling Unit RF 30 (2 x 0.65 kW) Universal Milling Unit for Grooving/Rebating and Profiling FB 30 (2 x 4.5 kW) 0° - 90° Multi-profile Scraper Unit RB 30 Flat Scraper Unit RC 05 / Soft Spraying Units (for polishing liquid) + Buffing Unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), PC control type NC 400, Biesse software No. 2 through-feed motorized conveyor belts Feed speed (m/min): 35 - 75 No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support: 2 x 1.5 kW Lredpfx Agsd Nuwielsg No. 2 upper vertical workpiece clamps No. 2 screw conveyors (continuous) for chip extraction Total connected load (kW): CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Kondisi: sangat baik (bekas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection: enclosure Lateral adjustment of aggregates carrier: manual Cam spacing (mm): 500 FORMATTING UNIT (per side): Pre-milling cutter AS 10 (5.8 kW) 2 x Hogging unit DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid release agent) Lredpfshvahhox Aglsg EDGE BANDING UNIT (per side): Edging unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°, pneumatic Multi-profile routing unit (CNC-controlled) RF 40 (1 kW x 2) 0 - 25° Multifunctional unit (radius and profile trimming) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool change (tools) 2 universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC-controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: Lrsdjhvah Nepfx Aglog A) INFEED STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) ROTATING TRANSFER UNIT (longitudinal/crosswise), with double-cone "RBO" Model GPK-1 C) Double-sided Sizing and Edge Banding Machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180° face-down) "RBO" Model Ribaltatore E) ROTATING TRANSFER UNIT (crosswise/longitudinal), with double-cone "RBO" Model GPK-2 F) OUTFEED STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC MACHINING CENTER Lrjdoihfiiopfx Aglog Movable table (workpiece), movable working head – Vertical table (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers to secure workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinets Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (qty.): 2 Independent horizontal drilling spindles (qty.): 36 (9+9 = 18 x 2) Motor power for drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) qty.: 1 Power of vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Carousel magazine, 10 tool positions