Beli Mubea Kbl bekas (91)

Kondisi: baik (bekas), - Mechanical - 5 stations - 380V Bedowt Urzjpfx Abksdk

Kondisi: bekas, Round steel 33 mm Square steel 30 mm Angle steel 60 x 8 mm Hole diameter in sheet thickness 20 in 13 mm Punching unit: Press force 35 t Punching unit: Throat depth 320 mm Punching unit: Max. stroke length 24 mm Punching unit: Capacity (Dia. x Thickness) 28 x 10 mm Punching unit: Capacity (Dia. x Thickness) 23 x 12 mm Total power requirement 1.5 kW Machine weight approx. 1.7 t Bdedovkix Eepfx Abkok Space requirement approx. 1.5 x 0.7 x 1.8 m Section steel shear with punching unit

Kondisi: bekas, Profile steel shear, profile shear, punch, punching machine, hole punch - Pressing force: 29 tons - Punching: Bdodsf Ek H Uopfx Abkjk - Shearing: - Cutting: - Notching: - Mechanical actuation: - Various punches and dies: - Length stop: - Installation dimensions: 1300/1570/H1900 mm - Transport dimensions: 1300/770/H1900 mm - Weight: 1112 kg

Kondisi: baik (bekas), Mubea Muhr and Bender profile steel shear Type: KBL 16 Dimensions: 200 x 75 x 197 cm (L x W x H) Bdsdencc Hujpfx Abksk

Kondisi: bekas, stanze-schere-mubea-hydraulic-kblh-1000 Bdodpfxswnhd Ho Abkok

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1991, Punching machine with 700 kN punching force, 510 mm throat depth, punches 30 mm holes in up to 20 mm material thickness. Flat bar shear: 500 x 18 mm. Notching device with rectangular tooling up to 13 mm. Bdsdpfx Abjxtqu Neksk Section steel shear for angle steel, 90°. - Machine in good original condition! Approx. 70 sets of punching tools included.

Kondisi: bekas, Tahun pembuatan: 1986, Daya tekan maksimum: 700 kN Jarak overhang: 510 mm Memotong pada gunting besi datar 500 x 18 mm Melubangi misalnya diameter 30 mm pada besi plat 20 mm Bodpfxef Nwqdj Abksdk Perlengkapan alat sudah termasuk dalam harga Berat: 3.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Model: KLH 500 / 610 Year of manufacture: 1995 Bjdpswxy Dgsfx Abkedk - Punching force: 50 t - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm material, Ø 50 mm in 9 mm material, Ø 100 mm in 4.5 mm material - Throat depth: 610 mm - Equipped with support table

Kondisi: bekas, Maximum punching force: 1,000 kN Bodpfxewyuvas Abkedk Throat depth: 510 mm Positioning unit by PEHU from year of manufacture 2019 for the punching side (Max. X-axis approx. 1,100 mm, Y-axis approx. 350 mm) Hydraulic hold-down device for profile and flat bar shear Cuts 500 x 20 mm on the flat bar shear Punches, for example, 40 mm diameter holes in 22 mm flat bar A selection of tools is included in the price Weight: 5,000 kg

Kondisi: bekas, Tahun pembuatan: 1993, Maximum punching force: 1000 kN Throat depth: 510 mm Large support table with material stops on the punching side Electric stroke length stop for the shearing side Hydraulic hold-down device for the section and flat bar shear Cuts up to 500 x 20 mm on the flat bar shear Punches, for example, 40 mm diameter holes in 22 mm flat bar Assortment of tools included in the price Bdjdpfxef Nwn As Abkjk Weight: 5,000 kg

Kondisi: bekas, Max. punching force: 700 kN Throat depth: 510 mm Flat bar shear capacity: 500 x 18 mm Bdsdpfx Absumluqekjk Punches, for example: 30 mm diameter in 20 mm flat bar Support table on punching side with stops Assortment of tools included in the price Weight: 3,000 kg

Kondisi: bekas, Maximum punching force: 700 kN Throat depth: 510 mm Cuts 500 x 18 mm with the flat bar shear Punches, for example, 30 mm diameter holes in 20 mm flat bar Quick-change device, assortment of tools included in the price Weight: 3,000 kg Bdodjq Iyvvepfx Abkek

Kondisi: bekas, stanzkraft-560kn-werkzeuge-inkl Bjdpexz Ep Djfx Abkedk

Kondisi: baik (bekas), Tahun pembuatan: 1991, 1 piece hydraulic punching machine, Manufacturer: MUBEA, Type HP 1000 / 760. Bedpfxotv Hzvj Abkodk Year of manufacture: 1991 Punching force: 100 tons With punch saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m), pivotable and with digital display, carriage clamping and foot switch Dimensions (L x W x H): 1930 x 780 x 1980 mm Throat depth: 760 mm Working height: 1135 mm Hole: 40 in 22 mm Stroke: 0 - 70 strokes Stroke rate at full stroke: 11 strokes Drive power: 8.5 kW Weight: 3800 kg / 3600 kg Used, fully functional

Kondisi: baik (bekas), Hydraulic Profile Steel Shear, Profile Shear, Punching Machine, Punch, Hole Punch, ch/b Steel Shear -Manufacturer: Mubea, hydraulic profile steel shear type HPSN 350 -Drive: hydraulic -Pressing force: 35 t -Equipment: large support table with stops for punching Bsdpfx Aofndy Nebkodk -Punching -Shearing -Cutting -Notching -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080 kg

Kondisi: bekas, de2hu-it-lt-lv-nb-nl-pl-001 Bdsdpfx Abexu Dxqeksk

Kondisi: bekas, lochstanze-muhr-bender-mubea-kl-350-203-engl Bdjdsxf Utaepfx Abkjk

Kondisi: bekas, Tahun pembuatan: 1970, Sheet width 170 mm Sheet thickness 0 mm Number of rolls 0 Machine weight approx. 0.1 t +++++ Please note that the machine is dismantled and ready for loading. For this reason, a live demonstration or the production of a video is not possible. Bdedpfx Asd N Spmebkjk Furthermore, our listing contains the most representative photos of the best possible quality. Unfortunately, sending additional images is not possible. +++++

Kondisi: bekas, de Bdedpfx Abovcmrgskjk

Kondisi: bekas, Lebar pelat - maks. 300 mm Tebal pelat 8 mm Besi datar 80 x 10 mm Panjang pisau 300 mm Panjang mesin 860 mm Bdodpouvd A Eofx Abkok Tinggi mesin 565 mm Berat mesin sekitar 172 kg Gunting pisau panjang berat Ini adalah mesin bekas, oleh karena itu dijual tanpa jaminan apapun. PEDAGANG DENGAN PERSEDIAAN DAN SHOWROOM SELUAS 1600 m²

Kondisi: bekas, Sheet width - max. 200 mm Sheet thickness - 6 mm Flat steel - 70 x 7 mm Bsdjg Sx R Rspfx Abksdk Round steel - 13 mm Machine weight approx. 50 kg Space requirements approx. 800 x 500 x 1800 mm

Kondisi: bekas, Tahun pembuatan: 1993, Technical details: Workpiece thickness - max.: 80 mm Workpiece thickness - min.: 5 mm Plate size without repositioning: 2000x1000 mm Bdodpou Id Rujfx Abkok Minimum plate size: 100x100 mm Longitudinal travel: 2800 mm Cross travel: 1000 mm Control: CNC Mubea Matic100 Hole diameter min/max: 10/40 mm Tool holder: Taper/cone/cono DIN 6327 Drill spindle stroke: max. 150 mm Positioning accuracy: +/- 0.5 mm Spindle speeds: 112-180-224-280-355-560 rpm Traverse speed: 80 m/min Feed length: max. 150 mm Rapid traverse: 8 m/min Worktable: L: 2500; W: 950 mm Workpiece weight: 750 kg Deburring unit max.: d = 40 mm Working height: 1050 mm Gripper device: 4 pieces Gripper opening min/max, Type I: 5/45 mm Gripper opening min/max, Type II: 45/85 mm Compressed air connection: 6 bar Total power requirement: 30 kW Machine weight approx.: 5.5 t Space requirement approx. LxWxH: 5.0 x 5.5 x 2.7 m (depending on configuration) Description: 2-axis CNC-controlled plate drilling system for automatic processing of sheet metal and flat material Consisting of: machine body, Y-axis drive unit, X-axis drive unit, positioning unit, deburring unit, drilling unit, workpiece support tables, hydraulic unit, and control system Additional technical specifications: - Processing of plate sizes up to 1000x4000 mm possible through repositioning! - Material support tables with support elements, guide rail for positioning carriage transport (approx. L: 2500 x W: 950 mm, load approx. 750 kg) - Drill cooling via compressed air - Control system for 2-axis positioning: X-axis 80 m/min and Y-axis 30 m/min - Controller with memory capacity for approx. 10,000 programs Equipment: - 1 positioning carriage, 2 material support tables, full-length material conveyor - Control cabinet, operator panel, shelving, deburring device - CNC display control Accessories: Roller conveyor 1800x1000 mm and roller tracks 2x1000 mm The machine is available ex works Leipzig, ready for transport.

Kondisi: baik (bekas), Tahun pembuatan: 1978, Punch, punching machine, punching unit, hole punching machine, hole punch, copying punch, stop punch, hole punch, eccentric punch, multi-hole punch, punching machine, punching press - Manufacturer: Mubea, hole punch type KL 100 - Pressing force: 100 tons - Punching capacity: see photo of nameplate - Throat depth: 500 mm - Accessories: included, see photos - Dimensions: 1460/880/H2100 mm Bodpfx Abowrn U Hekodk - Weight: 2660 kg

Kondisi: bekas, Daya tekan: 350 kN (misalnya meninju 23 mm pada material 12 mm) Bdedpfx Abjxqqphjkok Memotong 150 x 10 mm di mesin gunting baja pelat Dua pedal kaki terpisah untuk sisi punching dan sisi gunting sehingga proses punching dan pemotongan dapat dilakukan secara independen Meja penyangga di sisi punching dengan pin penahan. Paket alat sudah termasuk dalam harga.

Kondisi: bekas, Tahun pembuatan: 1993, en-001 Bedpfsu Ickyjx Abkedk