Beli Bingkai Kayu-Bautisch bekas (13.093)

Kondisi: seperti baru (mesin pameran), EX-DEMO MACHINE For sale is an as-new Drechselmeister Stratos FU 230 LV (Long Version) woodturning lathe, turning machine, featuring a center distance of approx. 1,000 mm / 1 meter. The exhibition machine is in its original condition, so you receive the full warranty. Technical Specifications: - Center height: 230 mm - Swing diameter: 455 mm (up to 800 mm with optional outboard turning device!) - Center distance: approx. 955 mm with the SPECIAL MODEL STRATOS FU-230 LV (can be further extended with optional bed extension!) - Spindle thread: M33 x 3.5 (hardened) with ASR (Euro) safety groove* - Spindle and tailstock taper: MT2 - Speeds (2 belt ranges): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight SPECIAL MODEL LV: 195 kg The machine is located at A-5431 Kuchl and can be inspected any time during our opening hours. Subject to prior sale! Tsdpfstpxw Aox Aatjf Freight shipping: Austria: €105.00 incl. VAT Germany: €125.00 incl. VAT South Tyrol: €150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry seriously! Thank you, your NEUREITER Team Related keywords: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning tools, wood turning, machine Reference: R-A0117

Kondisi: siap digunakan (bekas), Detektor logam dengan kabinet pengoperasian listrik Tsdpfex Agttex Aatof

Kondisi: hampir baru (bekas), - German made - new knives and counter-knife TECHNICAL SPECIFICATIONS: - feed opening: 520x1000 mm - motor power: 80 kW - four rows of knives - counter-knife - screen: 20 x 20 mm - screen dimensions: 1000 x 900 mm - rotor diameter: 600 mm Tjdpfxeqy Ek Hs Aatef - shaft speed: 830 rpm Machine dimensions: 235x170x290 cm weight approx. 4000 kg

Kondisi: sangat baik (bekas), PL-7826-2024-06-28 Todjxykfbepfx Aatsf

Kondisi: bekas, de Tjdpfx Aswp Rqfeatof

Kondisi: bekas, nomor mesin/kendaraan: YT9T201521200xxxx, Tahun pembuatan: 2015, 20797 Tjdpjwvzawefx Aatsf

Kondisi: seperti baru (mesin pameran), EX-DEMO MACHINE For sale: As-new Drechselmeister TWISTER XL wood lathe (turning machine) with a center distance of 800 mm. This demonstration unit is in original condition and comes with a full warranty. Technical data: - Center height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning attachment!) Tjdpstpxx Isfx Aatsf - Center distance: approx. 800 mm (extendable!) - Spindle thread: M33 x 3.5 with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Tailstock travel: 150 mm (with scale), trapezoidal thread - Motor: 2 HP - Weight: approx. 290 kg The machine is located in A-5431 Kuchl and can be inspected during business hours. Subject to prior sale! Forwarding shipping: Austria: €125.00 incl. VAT Germany: €150.00 incl. VAT South Tyrol: €180.00 incl. VAT Related terms: wood lathe, lathe, turning machine, woodturning, turning, turning tool, woodturner, machine Reference: R-A0117

Kondisi: bekas, Tahun pembuatan: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200 kW elektrik termasuk panel kontrol sepenuhnya diperbaharui pendingin baru MESIN DAPAT DIDEMONSTRASIKAN. Tedpfjxyz Uyjx Aatef

Kondisi: bekas, Guillotine for strips Todpsh Ab H Asfx Aatef Cutting with blades An ideal machine for frame manufacturers Machine operated by foot pedal

Kondisi: bekas, with pneumatic clamping system. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty, base frame construction for a flat working surface. - Clamping of components via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 up to 3,800 mm. The stroke of the cylinders is 320 mm, and the clamping force per cylinder is approx. 420 kg / 4,200 N at 10 bar operating pressure. Clamping can be done in two groups of 5 and 4 each, allowing two elements to be clamped/processed simultaneously. - Surface of the workstation is panelled with wooden boards as far as technically possible. (Optional: a perforated steel plate as shown in the photo is available.) - Positioning system at the bottom with 9 removable locating pins and on the side with 7 removable locating pins for precise component dimensions. - Tilting device for the assembly station via 3 hydraulic cylinders for element weights up to 4,000 kg at 85° (95°). The hydraulic system is compactly integrated within the frame area of the assembly station. The electrical control cabinet is also securely installed underneath the assembly station. - All functions are operated via a control pendant. - At both front ends of the station, a compressed air connection and electric socket are installed. On each long side of the station, two sockets and two compressed air connections for connecting hand tools are provided. - The stations are modular in design, so they can be upgraded with a receiver station to form a complete turning station either immediately or at a later time. You can see a turning station in image 3. - Further options: assembly table without tilting function perforated steel plates other working dimensions upon request Working area: Tjdpfx Aaowv Tqbstjf - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Locating/positioning pin height: 120 mm - Working height: approx. 700 mm - Colour: RAL 7035 light grey

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 9.300 h, Fungsionalitas: berfungsi sepenuhnya, Mesin pencacah Doppstadt DW3060 Tahun produksi: 2007 Tsdpfxjx Ap Aqe Aatjf Magnet di atas sabuk konveyor. Jumlah jam kerja: 9300 jam Harga: 59.000 EURO

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Device description Pump motor power - 1.35 kW 10 hydraulic pressing cylinders - spring return 17 top hydraulic cylinders for beam pressing Todpfx Aovy Uqfsatef Maximum working dimensions 7 x 1.5 m

Kondisi: seperti baru (mesin pameran), EX-DEMO MACHINE For sale: As-new Drechselmeister MIDI PRO bench lathe with a centre distance of 450 mm. This ex-demo machine is in original condition, meaning you receive the full manufacturer’s warranty. Technical Specifications - Centre height approx. 178 mm (turning diameter 355 mm over the bed) - Centre distance approx. 450 mm (expandable!) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-rotation groove* - Tailstock with interchangeable quill MK2, 100 mm - Motor 0.7 kW / 1 HP (230 V) - Forward / reverse operation - 4-prong drive centre and live centre MK2 - Tool rest 250 mm (shaft 25.4 mm) - Faceplate 95 mm Tjdpfjtpn Tlex Aatef - Machine weight assembled approx. 67 kg - Weight of individual parts (for easy transport, e.g. to markets): - Headstock 27 kg - Bed 26.4 kg - Tailstock 7.5 kg - Tool rest assembly 6.2 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping (pallet freight): Austria: €60.00 incl. VAT Germany: €70.00 incl. VAT South Tyrol: €95.00 incl. VAT If you are interested in this machine, please include your complete address in the enquiry form so we can process your request professionally. Thank you, your NEUREITER Team Related terms: wood lathe, metal lathe, turning machine, bench lathe, woodturning, turning tools, lathe chisels, wood turning, machine Reference: R-A0117

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de-01 Tsdpexyz Umsfx Aatsf

Kondisi: bekas, jarak tempuh: 391.200 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 06/2019, berat keseluruhan: 26.000 kg, jenis bahan bakar: diesel, konfigurasi gandar: 3 gandar, berat muatan maksimum: 11.995 kg, berat kosong: 13.930 kg, ukuran ban: 385/65R22,5, jarak roda: 4.200 mm, rem: intarder, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, panjang ruang muatan: 6.100 mm, ukuran ban belakang: 315/80R22,5, jumlah tempat duduk: 2, kecepatan maksimum: 90 km/j, jumlah tempat tidur: 1, Perlengkapan: ABS, derek, kendali jelajah, komputer bawaan, kunci diferensial, kunci sentral, lampu depan tambahan, pemanas parkir, pendaftaran truk, pendingin udara, rem angin bertekanan,

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Professional Drum Dryer: SB-3000 OPTIMECH Todpfx Aev D D Axsatef Suitable for drying sawdust, wood chips, peat, flax, hemp, grain, biomass, manure, corn, rapeseed, tobacco leaves, mint, herbs, plastic granulate, copper, aluminum, sand, fruits, vegetables, pits, seeds, mushrooms, bread, and more. Complete, ready-to-operate unit. Our dryers have been successfully operating at clients' facilities for over 15 years without any issues. The machine is adaptable to virtually any type of raw material. The material never comes into contact with exhaust gases or an open flame. Drying is performed via a heat exchanger, using only hot air. No risk of spontaneous ignition or scorching (drying temperature is adjustable). The dryer is best suited for indoor use in environments with a minimum ambient temperature of +10°C. Performance: approx. 10-15% moisture removal per hour; - Drum rotation drive: 1.1 kW (minimal power consumption due to large gear wheel use); - Hot air heater supply: heating oil/diesel fuel; - Heating oil consumption: about 5 L/h; - Total electrical power consumption: approx. 3 kW; - Efficient Italian fans (2 x 2500 m³/h); - Flue gas is discharged exclusively at a single outlet; - Mechanical steam extraction with cyclone separator; - Rotary heat recovery unit (entirely made of acid-resistant stainless steel); - Safe and easy to operate; - Drum rotation: left/right; - Control cabinet and all wiring installed by a qualified electrician; - All spare parts available immediately, as we are the machine’s manufacturer; - Custom modifications available upon customer's request; - We have a complete machine park and a comprehensive production hall, continuously operating in the same location for over 40 years. We are trustworthy, transparent, always reachable by phone, and at your service. Single batch raw material input: up to 1.5 m³. Thermal output: 40–100 kW. Adjustable drying temperature (controller with temperature sensor included). Fitted with a reliable oil burner from the renowned brand: LAMBORGHINI. The machine can be purchased without the horizontal conveyor shown in photos and video.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.800 h, Fungsionalitas: berfungsi sepenuhnya, Doppstad AK 640/K Tahun produksi: 2023 1.800 jam kerja Pemilik pertama Sistem penyemprotan Separator magnetik Harga: 425.000,00 Euro Leasing dapat diteruskan hingga 09.2028. Tjdjx Apzajpfx Aatjf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Schuster® Wood Shredder LL600 PLLA – only 500 operating hours The Schuster LL600 Polyoid wood shredder is among the most efficient and economical machines in its class. Its specially designed rotor shape achieves maximum efficiency with comparatively low motor power. Benefit from our many years of experience in mechanical engineering with this advanced wood processing system. Your advantages - State-of-the-art technology – robust quality - Space-saving design - High performance with low power requirement - Special cutting rotor for maximum throughput - Reusable cutting tools - Tooth plate made of special steel - Belt drive for vibration damping - 2,000-hour warranty on the high-performance gearbox - Replaceable screens with various hole sizes - Intelligent PLC control with contaminant shutdown (incl. 5 m cable) Tedpex Ah Dmefx Aatsf Technical specifications Dimensions: 1150x1130x1920 mm (LxWxH) Motor power: 11 kW Rotor speed: 570 rpm Rotor diameter: 280 mm Cutting tools: 34 pieces Cutting width: 600 mm Throughput capacity: 0.6 – 1.7 m³/h Extraction port: 200x200 mm Weight: 920 kg Year of manufacture: 2021

Kondisi: seperti baru (mesin pameran), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 woodturning lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive the full warranty. Tedotphy Ajpfx Aatjf Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (even greater with optional outboard turning attachment – depending on the workpiece!) - Center distance: approx. 560 mm (extendable!) - Spindle connection: M33 x 3.5, with ASR (Euro) anti-drop groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Overall width: 1,345 mm - Weight, stand version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please provide your complete address in the contact form so we can process your enquiry properly. Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning tools, wood turning, metal turning, machine Reference: R-A0117

Kondisi: baik (bekas), Tahun pembuatan: 2014, Mesin penggiling tipe PALLMANN PS-H 1000 x 1400, 132 kW Tedpfjxyz Utjx Aatjf Kondisi sangat baik Termasuk 3 set pisau rotor dan stator Termasuk 2 set saringan, 5 dan 8 mm TERSEDIA DAN SIAP DIGUNAKAN SEGERA

Kondisi: sangat baik (bekas), Diameter piring pengupas: 600 mm Jumlah pisau: 6 Tegangan: 380 V, 50 Hz Kapasitas penggerak: 11 kW Tedexz Unpjpfx Aatsf

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), CASATI BIG 2600 ini diproduksi pada tahun 1995. Mesin ini dilengkapi dengan sistem pisau ganda, baik atas maupun bawah yang memangkas bundel veneer dari kedua sisi secara bersamaan, memastikan hasil potongan yang presisi. Mesin ini memiliki lebar kerja yang besar dengan panjang potong efektif 2600 mm, ideal untuk menyiapkan veneer untuk furnitur dan pintu. Manfaatkan kesempatan untuk membeli CASATI BIG 2600 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Tedpfoxyl Sijx Aatof Mesin Pengolahan Kayu Lainnya

Kondisi: seperti baru (mesin pameran), FOR SALE: DEMONSTRATION MACHINE Available for sale is an as-new Drechselmeister Twister FU 200 wood lathe with a centre distance of 715 mm. The demonstration machine is in its original condition and comes with full warranty. Technical Specifications: - Centre height: 200 mm - Swing over bed: 395 mm (700 mm with optional outboard turning device) - Centre distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Headstock and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with trapezoidal thread), prepared for ER-25 drilling quill - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch - Weight (stand version): 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Todotpnawjpfx Aatsf Shipping charges: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so that we can process your enquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, metal lathe, turning machine, wood lathe, turning, turning tools, woodturning, machine Reference: R-A0117

Kondisi: seperti baru (mesin pameran), 1a9fa6e4-en-GB Tedpfetpn Nlex Aatef

Kondisi: seperti baru (mesin pameran), EX-DEMO MACHINE For sale is an as-new Drechselmeister MIDI 2 PLUS woodturning lathe with a max turning diameter of 355 mm. This ex-demo model is in original condition and comes with full warranty. Technical Specifications - Center height approx. 178 mm / Turning diameter 355 mm - Distance between centers approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (MK2 taper) with ASR (Euro) anti-rotation groove* - Tailstock with exchangeable quill 100 mm MK2, trapezoidal thread and graduated scale - (Optional: exchangeable quill with ER25 collet chuck system for drilling) - Motor 1 HP (230 V) with high-quality frequency converter - Approx. weight 53 kg The machine is located in A-5431 Kuchl and can be inspected during our opening hours. Subject to prior sale! Freight Shipping: Tjdpjtpn Srofx Aatjf Austria: € 50.00 incl. VAT Germany: € 60.00 incl. VAT South Tyrol: € 80.00 incl. VAT If you are interested in this machine, please include your full contact details in the inquiry form so we can handle your request professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe machine, turning machine, wood lathe, turning tools, woodturning, turning, machine Reference: R-A0117