Beli Bingkai bekas (266)

Kondisi: baru, Technical Data • System: for frame assembly • Minimum external frame dimensions (mm): 120 x 120 • Maximum external frame dimensions (mm): 700 x 2200 • System length (mm): 2750 • System width (mm): 1250 • System height (mm): 900 • Custom sizes: available Machine Features • Precise alignment of frame rails prevents displacement of mitre surfaces relative to each other • Manual alignment of frame rails is unnecessary • Cost-effective frame production through automation Gbjdpfxsfiqlle Ah Rsi • No fixture-dependent limitation of frame dimensions • Popular techniques for joining frame mitres are supported • Compact design ensures a small footprint • Simultaneous bonding of centre layer possible • Complete front panels can be bonded in a single operation

Tahun pembuatan: 1984, Kondisi: sangat baik (bekas), Complete sawmill line, manufacturer Linck. Can also be sold individually. Heavy-duty log machine with up to 900 mm feed opening. Stroke 600 mm with intermediate gear and drive. Dismantled and available from stock, 36110 Schlitz. Gbodpfofym Edex Ah Rji

Tahun pembuatan: 1980, Kondisi: bekas, Passage width: 560 mm Passage height: 560 mm Lift: 600 mm Gbjdpfxscvhndo Ah Rei Max. speed: 320 rpm The saw frame system is fully mechanized, equipped with a new Moehringer quick-feed unit.

Kondisi: sangat baik (bekas), ORMA DE-30-20 Frame-type Assembly Press Working length: 3000 mm Working height: 1800 mm Number of top hydraulic cylinders: 3 Gbedpfx Ahow Avcms Rei Stroke of top cylinders: 200 mm Number of side hydraulic cylinders: 2 Stroke of side cylinders: 100 mm 3 operating modes Maximum operating pressure: 100 bar Hydraulic pump motor: 1.5 kW

Kondisi: baru, Tahun pembuatan: 2024, Frame and Edge Press with Manual Hydraulic Press Units, single-sided, stationary > Sturdy welded frame construction > Frame press device with continuous left-hand abutment > 1 sliding carriage for width adjustment with locking in 50 mm hole grid system, with central locking drive bolt > 2 horizontally and infinitely adjustable manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke > 5 roller-bearing, vertical pressure beams made of heavy-duty profile tube, electro-galvanized, with manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke. Press units adjustable in 50 mm hole grid. Abutment adjustable in 6 steps with anti-drop protection. Abutment and pressure plate 140 mm long, 80 mm deep. > 1 hold-down clamp, galvanized, for manual suspension with spindle pressure > Paint finish: grey white RAL 9002, pressure plate and abutment gentian blue RAL 5010. > Overall dimensions (W x H x D): 3340 x 2350 x 730 mm (long version: 3690 x 2350 x 730 mm) > Optionally available with a different number of vertical pressure beams (see accessories list) Usable dimensions (W x H in mm) as frame press: 2700 x 1800 Gbedpfjyuxksx Ah Roi Usable dimensions (W x H in mm) as edge press: 3000 x 1800 Price plus packaging: €92 net Special solutions on request!!

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Ruchser roller conveyor for windows with 90° rotary device, left/right, length 4400mm. Electrically driven accumulating rollers with 2 parallel, pneumatically tiltable sections adjustable from vertical to 7°; outer side up to 7° vertical, inner side. Sections are 1900 mm high with rubber roller strips. Between the rubber strips are stainless steel sheets recessed by 2 mm to serve as gliding surfaces with clip holders. Infeed and outfeed equipped with edge-protection rollers, up to 3000mm high, designed as rubber rollers. Infeed section: 2000 mm; outfeed section: 4000 mm with driven accumulating rollers. Control system and operator panel mounted on freely adjustable stand. Godpfx Aelpcc Ioh Rebi

Kondisi: baik (bekas), Tahun pembuatan: 1971, Esterer frame saw including many spare parts and at least 40 new and used saw blades. The frame saw is in good, ready-to-use condition with minimal bearing play. Upon agreement, the saw blade sharpening machines can also be included in the sale. Gbsdpfxsncfiys Ah Roi

Kondisi: baik (bekas), 0119 Brand: KOLMAG - ITALIA Modello: PGP 600 F Pressa idraulica per stampi, telai, elementi per mobili, porte in legno massiccio, materiali plastici, materiali compositi e vari. Gsdpfxewk Ntzs Ah Rebi Struttura modulare della pressa realizzata con piastre pesanti di grosso spessore, senza saldature e lavorate a macchina utensile. Impianto oleodinamico dotato di sistema di prefilling dei pistoni per consentire una rapida apertura e chiusura dei piani. Dimensioni piani in acciaio massiccio: mm 1600 x 500 - Spessore mm 60, con resistenze elettriche - Temperatura massima 260°. N° 3 pistoni, diametro mm 240 Pressione kg/cm2 56 Spinta tonnellate 450 Barriere fotoelettriche di sicurezza Centralina idraulica Kw 7,5 Assorbimento potenza piani riscaldanti 31 Kw Quadro di comando con manometro controllo pressione - Timer di apertura piani - Teletermometro per regolazione temperatura piano superiore - Teletermometro per regolazione temperatura piano inferiore - Selettori apertura/chiusura piani - Pulsante di emergenza Ingombro totale mm 2250 x 1700 x 3300 h Peso kg 9000

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Y: 3.000 mm, panjang umpan sumbu Z: 180 mm, lebar total: 2.300 mm, panjang total: 4.120 mm, tinggi total: 2.650 mm, tinggi kerja: 180 mm, lebar kerja: 2.000 mm, kedalaman pelat tekanan: 120 mm, gaya penekanan: 2 t, berat keseluruhan: 2.000 kg, panjang langkah: 100 mm, masa garansi: 12 bulan, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis penyesuaian ketinggian: mekanis, daya: 3 kW (4,08 hp), Doppelte hydraulische Rahmenpresse – Industrielle Lösung für präzise und effiziente Montage Für anspruchsvolle Produktionsumgebungen konzipiert, bietet diese doppelte hydraulische Rahmenpresse höchste Anpassungsfähigkeit und strukturelle Integrität. Sie ist ideal für das Verpressen von Holzrahmen – von Fenstern und Türen bis hin zu maßgefertigten Möbelkomponenten unterschiedlichster Formen und Größen. Maximale Flexibilität für vielseitige Einsatzbereiche Dank ihrer intelligenten Konstruktion und verstellbaren Spannsysteme passt sich die Presse zügig an Rahmen mit verschiedenen Stärken und Geometrien an, ohne aufwendige Umrüstungen oder manuelle Eingriffe. Der Wechsel zwischen Werkstücken erfolgt schnell und unkompliziert, was die Produktionseffizienz erheblich steigert. Industrietauglicher Aufbau für schwere Beanspruchung Der Pressenrahmen besteht aus hochwertigem Baustahl und gewährleistet durch seine robuste Konstruktion erhöhte Verwindungssteifigkeit und Stabilität auch unter hoher Last. Die Seitenholme werden aus einem einzigen massiven Stück gefertigt, wodurch Schwachstellen durch Verschraubungen oder Schweißnähte entfallen. Gezielt eingesetzte Verstärkungen minimieren die Torsionsverformung beim Pressen und sichern die exakte Ausrichtung und Rechtwinkligkeit aller Rahmenkomponenten. Diese stabile Bauweise fördert nicht nur die Betriebssicherheit, sondern verlängert auch die Lebensdauer der Maschine selbst bei kontinuierlichem industriellen Einsatz. Effizientes hydraulisches Pressen mit präziser Kraftregelung Das System verfügt über 10 hocheffiziente Hydraulikzylinder (6 vertikale, 4 horizontale), die über die gesamte Rahmenfläche gleichmäßigen und kontrollierten Pressdruck ausüben. Das garantiert eine konstante Pressung der Verbindungen und eine gleichmäßige Leimverteilung – Fugen oder Schwachstellen werden vermieden. Zusätzlich sorgen drei frontale Presssysteme für optimalen Kontakt zwischen Werkstück und Pressentisch und ermöglichen eine präzise Positionierung vor dem Spannen. Gedpfjwgybuex Ah Rebi Modulare Presskolben mit Schnellspannvorrichtung lassen sich einfach umpositionieren, um punktgenau Druck auf unterschiedlich große oder komplex geformte Rahmen auszuüben. Dies ist besonders vorteilhaft bei anspruchsvollen Geometrien oder sensiblen Bereichen. Einfache Bedienung durch vollautomatisches Hydrauliksystem Dank einer leistungsstarken Hydraulikpumpe arbeitet die Presse autark – externe Druckquellen sind nicht erforderlich. Alle Pressfunktionen und Druckeinstellungen werden über benutzerfreundliche elektrische Bedienelemente aktiviert, wodurch körperliche Belastung für den Bediener entfällt. Jeder Arbeitsbereich verfügt über ein separates Fußpedal für noch mehr Flexibilität am Arbeitsplatz. Die Hydraulikpumpe gewährleistet während des gesamten Presszyklus einen konstanten und gleichmäßigen Druck, was eine durchgehend hohe Qualität der Pressergebnisse sicherstellt. Ausgelegt für industrielle Hochleistungsproduktion Diese doppelte Rahmenpresse überzeugt durch: - hohe Verarbeitungskapazität, - Anpassungsfähigkeit an verschiedene Rahmen- und Materialtypen, - effizienten und zuverlässigen Betrieb. Sie ist die ideale Lösung für Unternehmen in der industriellen Serienfertigung und verschafft Ihrem Betrieb einen echten Wettbewerbsvorteil in punkto Geschwindigkeit und Präzision bei Montagearbeiten. Technischer Support verfügbar in Englisch – Rumänisch – Deutsch.

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, Gbedpou Uvalofx Ah Rji ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Article ,00 pcs Double swing pressure plate for pointed (triangle) windows ----- Total price as specified above ex works: On request! -----

Kondisi: baru, en-GB Gedpfx Ahjd Ih H Sj Rsbi

Kondisi: baru, Working width: 3500 mm Working height: 2300 mm Number of pressure cylinders: 4 pcs. S&S Frame Press Type T 35 – CE Version ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment available with intermediate pressure beams, angled window device, counter profiles for single-piece production, and much more! Request our complete price list! Description: Robust frame welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm grid hole spacing. Gsdpsd Ih H Nefx Ah Rebi Continuous left-side counter-bearing for wide surface pressing, lower counter-bearing on 2 levels. Vertical pressing cylinders mounted on special pressure beams with single-hand quick adjustment and weight compensation, height adjustable in 50 mm grid holes. Long sliding carriages ensure permanently high pressing force absorption. Quick, smooth width adjustment by ball-bearing carriage with central locking; fixing in 50 mm raster. Upper horizontal pressing cylinder continuously height adjustable and equipped with weight compensation. Lower horizontal pressing cylinder with centering bores for the two counter-bearing levels, without weight compensation. Counter-bearing and pressure plate depth: 100 mm Pressure plate and support width: 130 mm. Machine is electro-hydraulically controlled, with 2 vertical pressing cylinders d = 60 mm, stroke 120 mm, double-acting, with weight compensation and single-hand quick setting; 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 130 bar, equivalent to 550 to 3500 kg pressing force vertically. Equipped with 3 kW three-phase motor for 400 Volt, 50 Hz operating voltage. Complete with electrical connection. Paint finish RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data according to manufacturer's information, errors excepted. Image may show optional equipment!)

Kondisi: bekas, Working width: 3600 mm Working height: 2600 mm Number of pressing cylinders: 5 units Loading dimensions (L x W x H): 4400 x 1150 x 2970 mm Weight: 3000 kg Schafberger + Sprödhuber Frame Press Bavaria ----- Machine will be overhauled by us prior to delivery With automatic pressing cycle + manual control For corner joints with mortise and tenon CE version Base machine in heavy-duty welded frame construction, with thick-walled special hollow sections. Guide rails for the pressure beams at the press corners manufactured for low wear. Quick and smooth manual width adjustment via ball bearing carriage, locking in detent system. Gbodpjw T Un Usfx Ah Roi Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, thus no vertical positioning of the horizontal pressing cylinders necessary, which avoids cylinder collisions. The lower abutments can be set at multiple positions to the most favorable insertion height in each case. 3 vertical pressing cylinders, double-acting, stroke adapted to working height, 2 horizontal pressing cylinders, double-acting Abutment and pressure plate depth: 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Required space/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing aids for angled windows (Technical data according to manufacturer's specifications – subject to change! Images may differ from original, prices net, plus VAT (domestic))

Kondisi: bekas, de-hu-001 Gjdpfx Aoxbn Ntsh Rebi

Kondisi: bekas, sterilisierbarer-universalfilter Gbedpfxexbn N Ho Ah Rsi

Kondisi: bekas, Tahun pembuatan: 1991, frame press bekas pneumatis ukuran kerja 3500 x 2500 mm dengan balok tekanan tengah presisi sudut absolut tanpa koreksi tinggi kerja yang nyaman karena semua sudut tekan dapat disesuaikan pengoperasian silinder kerja menggunakan 2 katup udara tekan semua sudut tekan dapat disesuaikan tekanan dapat diatur dari 0-15 bar Ketersediaan: segera Lokasi gudang: Röllbach Gbedpfxew I Un Ro Ah Rsi

Kondisi: bekas, Tahun pembuatan: 1993, Mesin bekas Tahun pembuatan: 1993 Press rangka otomatis Area kerja: 3550 x 2400/2600 mm Tekanan kerja: 120 bar Tekanan per: 21000 N/kp Stroke silinder vertikal: 250 mm, horizontal: 20 atau 80 mm Kontrol: otomatis Koneksi listrik dengan balok tekanan tengah Perlengkapan khusus: - Impuls "Buka press" - Perangkat pemposisian vertikal - Kompensasi lebar untuk 1 MB - 1 silinder tekan horizontal tambahan - Penyeimbang berat pegas Gbjdsw I Ui Uepfx Ah Rsi - Perlengkapan keselamatan kerja: tali pengaman Dimensi pemasangan: 5150 x 1500 x 3340 mm Berat: 2500 kg Koneksi listrik: 3,5 kW Koneksi udara tekan: R 3/8” maks 8 bar Ketersediaan: segera Lokasi: Röllbach

Kondisi: baik (bekas), 21-26 - Hydraulische Presse KALLESOE (gebraucht) Werkstücklänge: 2.200 mm Werkstückhöhe: 1.400 mm Vertikalzylinder Ø70 mm Motorleistung: 1,5 kW Hergestellt in Dänemark Transportmaße: 2.900 x 2.500 x 900 mm Gewicht: 500 kg Preis: 1.250 EUR (EXW Jonava, Litauen) Gjdpfx Aouctlnjh Robi

Kondisi: bekas, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type: RSD 1500 - 125 Machine no.: 317 / 690 Year of manufacture: approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram surface with 4 threaded holes M16 and 20 mm guide slot, centered centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Gbodpfx Aod Swtaeh Rsi Good condition

Kondisi: bekas, lt:Geros būklės Gbsdpfx Asq Tn Nuoh Rei Darbinis stalas: 2450x1000 mm Presuojamų dalių skaičius: 3 Presuojamos dalies plotas: 800x1000 mm Maksimalus darbinis aukštis: 500 mm Transportavimo matmenys: 2700x1000x1800 mm Svoris: 1055 kg Kaina: 1100 Eur (EXW Jonava, Lietuva)

Kondisi: bekas, Tahun pembuatan: 1992, 1 Gbjdpfx Ahewwxywe Rei

Tahun pembuatan: 2024, Kondisi: baru, Wagen zum Handling und zur Lagerung von übergroßen Flügeln/Rahmen COMALL CARR 900-93/15 Q, neu Technische Merkmale: - Kontaktflächen mit kratz- und stoßfestem Kunststoff beschichtet - Maximale Flügel-/Rahmenhöhe: 2.500 mm - 16 Stützenpaare - 15 Fächer mit einem Nutzmaß von 93 mm - 4 Räder Ø 125 mm, davon 2 mit Feststellvorrichtung Gedpfxem H Twge Ah Robi - Tragfähigkeit: 850 kg

Tahun pembuatan: 2024, Kondisi: baru, Trolley para el transporte de hojas y marcos COMALL CARR 600 - 85/9 Q, nuevo Especificaciones técnicas: - 9 compartimentos con tamaño útil de 84 mm Gbedpolfargsfx Ah Roi - Superficies de contacto recubiertas con material plástico antigolpes y resistente a los arañazos - Rodillos para el transporte de hojas - 4 ruedas de Ø 125 mm, 2 de ellas con freno - Capacidad de carga: 560 kg - Embalaje en cartón

Kondisi: bekas, nomor mesin/kendaraan: 478, Press force: 36 t Gbsdpfx Asbb Tgueh Roi Max. installation height: 135 mm Electrical connection: 380 V, 7.5 kW Required space: 1700 x 700 x 2150 mm Weight: 1800 kg

Kondisi: bekas, Tahun pembuatan: 1986, - 2 pneumatic pressure cylinders for longitudinal axis - 2 pneumatic pressure cylinders for transverse axis - 2 pneumatic workpiece hold-down devices - Feed belt width: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Machine dimensions: Gbedpeiim Rnofx Ah Roi - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg