Beli Bodo Gerhard Celle bekas (1.120)

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.030 mm, lebar total: 810 mm, tinggi total: 2.290 mm, efisiensi energi: B, tegangan masuk: 400 V, Tersertifikasi DGUV hingga: 04/2027, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, nomor mesin/kendaraan: 2026, lillnord-neu-gaerraum Podpfx Alek Itize Iegk

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, Tersertifikasi DGUV hingga: 04/2027, jenis arus masuk: tiga fasa, nomor mesin/kendaraan: 2026, ll-nord-2024-06-07-001 Pgsdpfx Ajk Iti Tol Isk

Kondisi: sangat baik (bekas), en_TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature consistency, supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature consistency, supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) - Cooling rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity consistency (in supply air, temporal): ≤ ±2.5% r.h. (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening of test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Pjdpfx Aljvx S Hhe Iegk Design: Airflow: - Supply air: perforated plate on rear wall, ceiling area - Exhaust air: perforated plate on rear wall, floor area Temperature Control: - Direct cooling by evaporating refrigerant in a finned heat exchanger - Heating with electric resistance heaters Dehumidification: - Direct dehumidification by evaporating refrigerant in a heat exchanger Interior cladding: stainless steel External cladding: galvanized, plastic-coated steel sheet Floor design: stainless steel, floor load 15,000 N/m², wheel load (contact area ≥4 cm²) 1,500 N/wheel Door: double-leaf door, stainless steel, painted exterior with observation window (W x H) 1000 x 1000 mm Test chamber lighting: 4 spotlights at 500 W each Insulation: double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration unit (1 piece): Bitzer 6G-30.2Y Refrigerant: R449A Refrigeration oil: SEZ 32 Steam humidifier (1 piece): EDB 40 Colors: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system approx. 4,900 kg - Machine module KB 127 approx. 750 kg - Control cabinet approx. 120 kg - Humidification unit approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50 Hz - Rated power: 95 kW - Rated current: 150 A

Kondisi: baik (bekas), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical Data - Climatic Chamber: Temperature range: -40 to +120 °C Temperature tolerance: +/- 0.5°C Pgsdpfxjuvi R Ao Al Iok Temperature change rate: 1 K/min Humidity range: 15 to approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone.

Kondisi: baik (bekas), RS simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% rH Pjdpjuvi Nfsfx Al Ijgk Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Light source: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information is without guarantee!) Please feel free to contact us by phone for further questions.

Kondisi: baik (bekas), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical Specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are subject to change!) Pgjdpouviydsfx Al Iok If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without thermal load): 10...85°C Temperature deviation over time during temperature operation: ≤ ± 0.5 K/min Temperature deviation over time during climate operation: ± 1.0... ± 1.5 K/min Change rates: Heating: average 2.0 K/min Cooling: average 2.0 K/min The IEC 1646 standard can be tested, for solar modules up to a max. weight of 160kg and with non-linear ramps (setpoint steps). Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95% r.h. Humidity deviation over time: ≤ ± 3.0...±5.0 % r.h. Dew point range: 8...80.9°C Test chamber Test chamber volume: 7.0 m³ Dimensions Test chamber internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Hinged door DIN right, heated, Width 900 mm x Height 2100 mm Viewing window, heated with blackout shutter and lockable, Width 500 mm x Height 600 mm Feed-through opening: 2x front right, ∅ 75 mm Radiation unit test chamber Cut-out: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area with SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system Bitzer compressor, semi-hermetic, 2-stage, air-cooled Condenser: split condenser (outdoor installation, winter control) Refrigerants: R507 / R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio: 50/50% Brine density: 1.072 kg/dm³ Filling volume: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply test chamber Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power requirement: approx. 32.0 kW Circuit breaker: 3x63, Char C (A) Power supply SolarConstant Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement: approx. 30.0 kW Circuit breaker: 3x63, Char C (A) External dimensions of the test chamber, complete with: machine room/control cabinet and control cabinet for SolarConstant 2500 Machine room external dimensions: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber, total: approx. 2700 kg Condenser weight, empty: 153 kg Weight: 2700 kg Pedpfxjklv H Is Al Iegk Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: baik (bekas), TIRA Pgedpeuvipwsfx Al Ijk Model: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260 mm x 3850 mm x 2780 mm Test chamber (W x D x H): approx. 2254 mm x 2645 mm x 2251 mm Door opening (W x H): approx. 2251 mm x 2254 mm Condition: Used Scope of delivery: (See picture) (Subject to technical modifications and errors. All information without guarantee!) For further questions, feel free to contact us by phone.

Kondisi: baik (bekas), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Data: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) Pgedpjuviumsfx Al Iok (Subject to changes and errors in technical specifications!) If you have any further questions, we would be happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS Podpsvb Hanefx Al Iegk Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) Psdpfx Aovb E Uqsl Iogk (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: bekas, Tahun pembuatan: 2023, 2023 Cloos Schweißroboterzelle mit QRC-300 Roboter & Qineo Next 452 Premium MIG/MAG-Schweißquelle – inklusive Leuze electronic MLS Sicherheits-Lichtvorhänge, Brenner-Reiniger und Handbediengerät. Doppel-Drehtisch, Tischabmessungen 650 x 450 mm. Pedpfx Aleyx Hzxs Isgk Cloos QRC-300 Roboter – Schwenkbereich Achse 1: -170° / +170°, Achse 2: -90° / +125°, Achse 3: -220° / +70°, Achse 4: -170° / +170°, Achse 5: -135° / +135°, Achse 6: -300° / +300°. Schwenkgeschwindigkeit Achse 1: 200°/s, Achse 2: 200°/s, Achse 3: 230°/s, Achse 4: 490°/s, Achse 5: 540°/s, Achse 6: 520°/s. Arbeitsbereich Ø3.000 mm. Reichweite 2.000 mm. Traglast 8 kg. Wiederholgenauigkeit +/-0,1 mm. Stellfläche 400 x 400 mm. Gewicht 110 kg. Serien-Nr. 0881590000-20040 (2023). Qineo Next 452 Premium – Schweißstrom 25A/15V – 450A/36,5V. Schweißstrom bei 60 % Einschaltdauer*: 450A/36,5V. Schweißstrom bei 100 % Einschaltdauer*: 350A/31,5V. Leerlaufspannung 80V. Netzspannung 380V–480V/3~. Anschlusskabel 4 x 6 mm². Netzsicherung träge 32 A. Schutzart IP. Isolationsklasse F. Kühlart F. Abmessungen L720 x B340 x H500 mm. Gewicht Leistungsmodul 63 kg. Gewicht Kühlmodul 28 kg. Serien-Nr. Qinx 1963 (2023). Drahtvorschubeinheit QINEO NexT – Drahtvorschub 30 m/min, Draht-Ø 0,8–2 mm. Gesamtmaße B350 x T270 x H230 mm. Gewicht 10,2 kg.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 61.469 h, produsen pengendali: TRUMPF, model controller: TASC 6000, This TRUBEND Cell 5000 featuring the TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, equipped with 6-axis backgauge sensor technology. Ensures highest repeat accuracy thanks to angle measuring technology (ACB) in automated operation. Features a robust all-steel frame, electro-hydraulic upper drive, and modern block hydraulics. The machine is controlled by the TRUMPF TASC 6000 with a 15-inch touchscreen and network capability. The TRUMPF TruBend Cell 5000 press brake is ideal for precise bending tasks. Contact us for further information on this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Press beam with spherical bearings and tilt adjustment • Electro-hydraulic upper drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics Psdpfx Aox Imqlel Ijgk • Electronic pressure scale • Measurement system with glass scale and spring compensation • Hydraulic oil within the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Backgauge/stop • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool displacement, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network capable • Teleservice via modem • Operation • Control panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety equipment • BendGuard safety device for upper tools up to 390 mm • CE marking Additional Equipment • TRUMPF BendMaster automation (standard equipment) • Robot/handling • Stable base and manipulator made of die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile, welded floor rail • Sheet sensor for contour detection • Rotary union for easy gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double-sheet detection • NC gripper handover station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operating terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access door World's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Highest repeatability thanks to angle measuring technology (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 400 h, berat keseluruhan: 34 kg, Sel robot Universal Robots UR10e 6-sumbu ini diproduksi pada tahun 2018. Memiliki daya angkut 10 kg dan jangkauan 1300 mm. Dengan berat 33,5 kg, lengan robot ini dirancang untuk tugas-tugas yang membutuhkan presisi dan fleksibilitas. Pertimbangkan untuk membeli sel UR10e dari Universal Robots ini. Hubungi kami untuk informasi lebih lanjut. • Sumbu: 6 • Daya angkut: 10 kg Pgodpfjx Tkbfox Al Iek • Jangkauan: 1300 mm • Akurasi pengulangan: +/- 0,05 mm • Rotasi: 6-sumbu

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), 1 Psdpfxjyv H Exo Al Isgk

Kondisi: bekas, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right & left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center partition): approx. 2000 x 950 mm - Table size of fixture-changing plate for welding jig setup: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control: YZNC-OP186 - Teach panel: JZNC-T834B - Robot: YRFL-NNA06WB - Automation unit by ECKHARDT type ROBO Robot payload: 6 kg Net weight (robot only): 180 kg Pgsdpfxswypqls Al Isk The entire system is configured as a compact welding cell. Robot control cabinet positioned adjacently. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirement for welding cell with robot (L x W x H): 2000 x 2000 x 2300 mm Weight of welding cell with robot: 1055 kg Space requirement for control and control cabinet (L x W x H): 1000 x 850 x 1600 mm Weight of control and control cabinet: 300 kg Overall space requirement of the system (L x W): approx. 3000 x 3000 mm Net weight of the complete system: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Kondisi: bekas, Vacuum pump, vane cell pump, rotary vane pump ALCATEL Type 100-132 Serial no.: 173082 - 3101 Year of manufacture: approx. 1995 Flow rate: approx. 50 m³/h Ultimate vacuum: 0.5 mbar (as per nameplate) Ultimate vacuum: -0.9 bar (determined during test run) Motor power: 3 kW Pgjdpfx Alod A Srgj Isk Motor speed: 1420 rpm Power supply: 400 Volt, 50 Hz - Oil-lubricated rotary vane pump Dimensions (L x W x H): 700 x 420 x 310 mm Weight: 78 kg Good condition

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 2735636, tinggi total: 2.300 mm, lebar total: 2.230 mm, panjang total: 4.000 mm, berat keseluruhan: 3.500 kg, Perlengkapan: kabin, Reis Robotics Welding Robot Cell SRV6-C (Year of manufacture 2003) Complete system consisting of robot, positioner, and power source Robot – Reis SRV6-C Type: SRV6-C Manufacturer: Reis Robotics Year of manufacture: 2003 Robot machine weight: 200 kg ID-No.: 2735636 Com.-No.: 52 1050 Axes: 6 Typical applications: MIG/MAG welding Positioner – Reis RND01 (Rotary Table) Type: RND01 Manufacturer: Reis Robotics Year of manufacture: 2003 Com.-No.: 52 1050 Machine weight: 300 kg Function: Single-axis rotary table / welding positioner Application: Fixture holding and rotational positioning for welding Control: Coupled with robot controller Cell control & switch cabinet Type: SRV6-C Manufacturer: Reis GmbH & Co Maschinen-Fabrik Year of manufacture: 2003 Electric connection: Voltage: 3~ 220/400 V Frequency: 50 Hz Connected load: 3 kVA Fuse protection: max. 5 A Pgodjyubygepfx Al Iek Pneumatics: Pmin: 5 bar Pmax: not used as per nameplate (no hydraulics available) Control cabinet weight: 125 kg Welding Power Source – Fronius TransPuls Synergic 4000 (TPS 4000) Manufacturer: Fronius Model: TransPuls Synergic 4000 (TPS 4000) Process: MIG/MAG / Pulse / Synergic programs Compatible with Reis robot controllers Accessories: Torch package Hose package Cooling water circuit (external tank visible) Dimensions: 4.0 × 2.23 × 2.3 m (Robot welding cell in closed construction) Operating hour meter: 29,593 h

Tahun pembuatan: 2013, Kondisi: bekas, de2hu-001 Pgodpfx Aoyr Skkol Iek

Kondisi: sangat baik (bekas), Yth. Bapak/Ibu, Kami menawarkan sebuah sel produksi bekas dalam kondisi sangat baik. Paket ini terdiri dari total 4 mesin, yakni: – Traub TNL 26 – Gildemeister GD 32 Psdpfeyrypzox Al Iegk – Star SV-20 – Star SR-32 termasuk dokumentasi terkait, sistem ekstraksi, serta aksesori. Jangan ragu untuk menghubungi kami untuk penawaran harga.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 10 kg, jangkauan lengan: 1.418 mm, produsen pengendali: FANUC, model controller: R-30iB Plus, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), akurasi pengulangan: 0,05 mm, masa garansi: 6 bulan, Perlengkapan: dokumentasi / manual, Sel otomatisasi bergerak GEWA "RoboFlex 10", terdiri dari... - FANUC CRX10iA - Kontroler R-30iB Plus - Tablet Teach Pendant - Rangka dasar termasuk 5 grid - Tanpa gripper (opsional tersedia) Sel ini berada di lokasi kami di Eifel dan dapat diperiksa dalam kondisi bertegangan. Penjadwalan janji temu sebelumnya diperlukan. Pjdpfxoxrknmj Al Ijgk OPSIONAL: Koneksi RoboFlex ke mesin perkakas Anda - Konfigurasi antarmuka otomatisasi - Instalasi dan commissioning - Pelatihan operator (2 jam) - Uji coba dan serah terima dengan pelanggan Kami dengan senang hati akan membuatkan penawaran sesuai kebutuhan untuk Anda.

Kondisi: bekas, Tahun pembuatan: 2017, TRUMPF - TRUBEND CELL 7000 - 2017 - sistem Siemens - termasuk press brake TRUMPF TRUBEND 7036 - gaya tekan 217 kN - panjang tekukan 2x500 mm - lebar bebas antar rak 1530 mm - tinggi instalasi efektif 300 mm - overhang 515 mm - BendMaster - ukuran benda kerja maks. 500 mm x 380 mm - berat benda kerja maks. 1,5 kg Podpfxjyl Stre Al Ijgk - kapasitas angkat maks. 15 kg - ketebalan plat min. 0,5 mm - ketebalan plat maks. 6 mm - dalam kondisi teraliri daya 34000+ jam - jam produksi 18500+ - termasuk robot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, A cell with an ABB Robot IRB 340 M2004 Type B – 34-51225 One of the fastest pick-and-place robots of the decade Delta robot for high-speed feeding, detail detection, and stacking Quantity: 10 units Year of manufacture: 2008 Controller: ABB M2004 Number of axes: 4 Payload: 1 kg Robot weight: 140 kg Workspace: Diameter – 1,130 mm Height – 250 mm Rotation – unlimited The cell is equipped with two belt conveyors, each 65 cm in length and 100 cm in width. Pjdpfxorbh Uxe Al Isgk PRICE per complete robot: €6,400 each. PRICE per robot in a cell: €7,100 each (including vision system and software).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 2014 Load capacity: 20 kg Pgjdpjr Aka Aofx Al Ijk Reach: 1726 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, kapasitas angkut: 5 kg, jangkauan lengan: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Pedeqgck Depfx Al Ijgk Controller: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56