Beli Bor Radial bekas (11.547)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
iklan kecil
Concordia Sagittaria
10.941 km
Bor Radial
SASSTRM 2200
Hubungi
Kondisi: baik (bekas), Used radial drill SASS Mod. TRM 2200
Excellent condition, fully operational.
Supplied with cubing block.
Maximum drilling diameter in solid cast iron 20-22: 100 mm
Maximum drilling diameter in solid steel R=60: 80 mm
Spindle sleeve diameter (sliding): 102 mm
Spindle Morse taper: 6
Vertical spindle travel: 500 mm
Number of spindle speeds: 32
Spindle speed range with 50 Hz motor (rpm): 18 to 1,600
Automatic feeds
Maximum arm reach (from column edge to spindle axis): 2,230 mm
Drilling radius (min – max): 660 to 2,505 mm
Bodoikqz Sepfx Abkelr
Head travel on arm: 1,845 mm
Vertical arm travel: 1,040 mm
Column diameter: 550 mm
Column height with motor: 3,720 mm
Base plate height: 260 mm
Base working surface: 2,490 x 1,230 mm
Spindle motor power: 11 HP
Weight: 9,000 kg
iklan kecil
Jerman
11.023 km
Mesin bor radial
WagnerPRC 35
Hubungi
Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), Kapasitas bor: 35 mm, Dudukan spindel bor: MK4, Gerak pinol: 285 mm, Jangkauan: 300 mm–1000 mm, Kecepatan: 2500 rpm, Lengan: 500 mm, Jarak spindel ke pelat dasar: 1000 mm, Dimensi pelat dasar X/Y: 1150 mm/780 mm. Peninjauan di lokasi memungkinkan.
Bodpfx Abew Nq Suskolr
iklan kecil
Malsch
11.219 km
Mesin bor radial cepat
HKS32 MG
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Drilling capacity in steel (diameter): 32 mm
Throat depth: 636 mm
Maximum workpiece height: 720 mm
Bsdjwvl Irjpfx Abkslr
Spindle speeds: 38 - 2000 rpm
Thread cutting: 38 - 643 rpm
Stroke: 450 mm
Maximum quill travel: 170 mm
Total power requirement: 6 kW
Machine weight: approx. 1.9 t
Space requirements: approx. 2.5 x 1.5 x 2.2 m
Left/right rotation, thread cutting unit
Infinitely variable feed adjustment
iklan kecil
Goldenstedt
11.124 km
Mesin bor radial cepat
OTTO MÜLLERSR 23
Hubungi
Kondisi: bekas, Drilling capacity in steel (diameter): 23 mm
Bljdpfswugrcjx Abkjr
Spindle taper: MT 2
Spindle stroke: 130 mm
Throat depth: approx. 860 mm
Table size: 1280 x 500 mm
Clamping surface: approx. 1250 x 480 mm
Speed range: 115 – 2400 rpm
Workpiece height – max.: approx. 535 mm
Drill chuck: quick-action chuck 1–13 mm
Machine weight: approx. 690 kg
Total power requirement: 1 kW
Dimensions (L x W x H): approx. 1300 x 1800 x 2100 mm
Distance spindle centre – column centre (throat depth): approx. 860 mm
Distance table–quill (workpiece height): max. 535 mm
Adjustability of the boom, horizontal/vertical: approx. 300 – 400 mm
iklan kecil
Trittau
10.978 km
Mesin bor radial
BREDAR 55-1250
Hubungi
Kondisi: bekas, Tahun pembuatan: 1994, kedalaman tenggorokan: 1.250 mm, Radial drilling machine
Make: Breda Type: R 55-1250
Year: 1994
Technical Details
Manufacturer: BREDA
Type: R 55-1250
Arm reach: 1250 mm
Drilling capacity in steel: 55 mm
Drilling capacity in cast iron: 70 mm
Tapping in steel: M 50
Tapping in cast iron: M 65
Spindle taper: MK 5
Arm reach: 1250 mm
Cross travel of drilling head: 930 mm
Min./Max. distance from base plate: 5360 – 1375 mm
Vertical movement of arm: 705 mm
Spindle stroke: 310 mm
Number of spindle speeds: 12
Spindle speeds: 30 - 1200 rpm
Number of feeds: 8
Feed rates: 0.06 – 1.0 mm/rev
Base plate: 2070 x 910 mm
Clamping surface of base plate: 1325 x 910 mm
Motor power: 4.4 kW – 380 Volts
Dimensions (L x W x H): 2.1 x 1.0 x 2.5 m
Weight: 3 t
Accessories
Drilling table: 750 x 600 x 550 mm
Coolant system
Hydraulic clamping system
All information subject to confirmation.
Bledpfov Rpf Ssx Abkor
A demonstration is possible at any time in our showroom.
iklan kecil
Hallstadt
11.017 km
Mesin bor radial
OptimumRadialbohrmaschine RD6
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Optimum OPTIdrill RD 6
High-precision, heavy-duty radial drilling machines in top quality. Ideal for versatile use in both single-item and series production.
- Broad application range including drilling, reaming, and threading
- Electrically braked motor
- 24V DC electrics and 2-channel safety circuit according to DIN EN 12717
- Heavy, robust, high-quality cast construction
- Wide overhang thanks to horizontally adjustable machine head
- Clearly arranged control panel
- Easy-to-move swiveling and traversing axes
- Elaborately crafted column swivel system with optimized clamping for maximum stability and minimal displacement
- Durable, torsion-resistant arm construction
- Arm height adjustment via powerful motor drive and lift spindle
- Drill head gearbox runs in oil bath
- Arm guideways hardened and precision-ground
- Gear wheels made of hardened and precision-ground chrome-nickel steel for quiet and consistent running
- Drill head and column can be clamped or released together or separately
- Forward/reverse operation
- Heavy-duty, precise, large worktable
- Hardened and ground clamping table with parallel T-slots
- Machine light
- Overload protection
- Thick-walled cast column ensures smooth operation and stability
- LED lamp
- Coolant system with integrated coolant tank in the machine base
Blsdpjwa Tc Sofx Abksr
RD 6 / RD 7
- Column is hydraulically clamped
Dimensions and Weights
Column diameter: 320 mm
Length approx.: 2670 mm
Width/depth approx.: 1120 mm
Height approx.: 2760 mm
Weight approx.: 3200 kg
Outrigger Arm
Swivel angle: 180°
Drilling Performance
Drilling capacity in steel (S235JR): 50 mm
Continuous drilling capacity in steel (S235JR): 45 mm
Work Table
T-slot size: 14 mm
Number of T-slots: 4
T-slot spacing: 180 mm
Distance spindle – worktable max.: 1420 mm
Clamping table length: 630 mm
Clamping table width: 500 mm
Clamping table height: 500 mm
Clamping table T-slot size: 22 mm
Clamping table T-slot number: 3
Clamping table T-slot spacing: 150 mm
Distance spindle – clamping table min.: 0 mm
Distance spindle – clamping table max.: 910 mm
Distance spindle – worktable min.: 465 mm
Speed Range
Spindle speed range: 44–1023 rpm
Number of speed ranges: 12
Electrical Data
Total connected load: 6.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Machine Base
Working surface length: 2550 mm
Working surface width: 970 mm
Motors
Spindle motor power: 4 kW
Arm lift motor power: 1.5 kW
Coolant pump drive motor power: 90 W
Hydraulic clamping drive: 0.75 kW
Spindle
Quill stroke: 270 mm
Spindle taper: MT5
Quill feed rate: 0.06 – 0.2 mm/rev
Quill feed rate steps: 3
Travel
Drill head travel (horizontal): 1250 mm
Arm lift stroke (vertical): 680 mm
Distance spindle – column max.: 1600 mm
Distance spindle – column min.: 350 mm
iklan kecil
Kaloyanovo
10.011 km
Mesin bor radial
БългарияFU251
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, It can be sold with a power cable for an additional 100 Euro on top of the price.
Bljdpfxevpgfae Abkjr
iklan kecil
Jerman
11.023 km
Mesin bor radial
Raboma12Uh1600
Hubungi
Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Kapasitas pengeboran: 55 mm, jarak lengan: 1600 mm, dudukan spindle: MK5, langkah spindle: 400 mm, kecepatan: 1800 rpm, feeding: 1,5 mm/putaran, dimensi meja X/Y: 1500 mm/800 mm, dimensi mesin X/Y/Z: sekitar 2800 mm/1000 mm/3000 mm, berat: sekitar 5500 kg. Inspeksi di lokasi memungkinkan.
Bedpfxjw Na E Ds Abkelr
iklan kecil
Kaufungen
11.078 km
Mesin bor radial
StiminGR 820 H
Hubungi
Kondisi: baik (bekas), 1 used radial drilling machine
Manufacturer: Stimin
Model: GR 820 H
Serial No.: 773
Year of manufacture: 2004
Technical specifications:
Bedpfxotzctmj Abkelr
Drilling capacity: 80 mm
Arm reach: 1600 mm
Drill spindle taper: MK 6
Drill spindle stroke: 390 mm
Spindle speeds: 24 steps, 20 - 1400 rpm
Right- and left-hand rotation
Feed, 12 steps: 0.045 - 1.5 mm/rev
Drive: 400 V / 14.5 kVA
Electromechanical clamping of arm and drilling unit
Distance from machined machine bed to drill quill:
min. approx. 400 mm
max. approx. 1800 mm
Usable machine bed with 4 T-slots: 1170 x 2185 mm
Coolant system
2 clamping tables
Space requirement approx. L 2600 x H 3950 x W 1300 mm
Weight approx. 8,500 kg
iklan kecil
Burgoberbach
11.050 km
Mesin bor radial
DonauDR30
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1965, Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 930 mm, For sale is a Donau DR30 rapid radial drilling machine.
The machine is in good and fully functional condition.
Bljdowal Hpspfx Abksr
Technical data:
Year of manufacture: 1965
Drilling capacity in steel (diameter): approx. 30 mm
Tapping capacity in steel: approx. M36 in cast iron
Spindle taper: MK 3
Spindle speeds: stepless approx. 45 – 2240 rpm
Quill stroke: approx. 170 mm
Arm reach: approx. 930 mm
Arm swivel range: 360°
Table size: 1200 x 500 mm
Spindle motor power: 4.0 kW
Weight: approx. 1.8 t
Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m
Tapping device with cut-off and reverse function.
Motorized height adjustment of the arm.
Left-hand drilling operation by hand & foot control.
Transport and loading can be organized at extra cost, Europe-wide, on request.
All prices are plus VAT.
Viewing possible by appointment. Contact us — our team will be happy to assist you!
Trade-in or exchange possible!
Machinery purchase / sales
BUY / SELL OF PRODUCTION & METALWORKING MACHINES AND MORE.
Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours?
For more information or to contact us, please visit our website.
iklan kecil
Bächingen an der Brenz
11.083 km
Bor Radial Cepat
DONAUDR 32
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1983, Work table 600mm x 1200mm
Arm travel distance 600mm
Tool holder MK 4
Drilling capacity 32mm in steel
Tapping device
Coolant system
Electrics: 24V control voltage
Emergency stop: 2-channel
Safety guard at the drill
Bjdpfxjmt Ed Rs Abkelr
Complete overhaul in 2025
12 months warranty
New coating RAL 7035/7031
iklan kecil
Ennepetal
11.231 km
Mesin bor radial cepat
UNBEKANNTradialbohrmaschine
Hubungi
Kondisi: bekas, Tahun pembuatan: 1988, Drilling capacity in steel (diameter): 50 mm
Throat / mm
Workpiece height – max. / mm
Table dimensions: 1200 x 580 mm
Bjdpfx Aswt Dwasbkjlr
iklan kecil
Wiefelstede
11.134 km
Mesin bor radial cepat
DONAUDR30
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1962, Radial arm drilling machine, pillar radial drilling machine, bench drilling machine, radial arm drill, high-speed radial drilling machine
- Clamping table: 400 x 1100 mm
- Arm reach: 930 mm
- Spindle taper: MT4
- Motor power: 1.35/1.8 kW
- Spindle speeds: 41-1700 rpm
Bodpoirax Uefx Abkjlr
- Column diameter: Ø 200 mm
- Spindle stroke: 125 mm
- Thread cutting device: YES
- Feed: 0.075 - 0.3 mm/rev
- Dimensions: 1800/1235/H2240 mm
- Weight: 1500 kg
iklan kecil
Shildon
11.704 km
Mesin Bor Radial
AsquithOD1 mk2
Hubungi
Kondisi: sangat baik (bekas), Spezifikation
Bljdpfx Aerpiy Tobksr
Spindeldrehzahlen: 9,5 bis 1560 U/min (18 Stufen)
Spindelaufnahme: Morsekegel Nr. 5
Spindelhub: 410 mm
Vorschübe: 0,066 bis 0,963 mm/U
Maximale Spindelhöhe Spindel zu Maschinenfuß: 70”
Säulendurchmesser: —
Skalierung: metrisch
Kraftspannsystem
Ausstattung:
- Sicherheitsbremse
- Aufspanntisch (Kastenform)
- Kühlmitteleinrichtung
- Elektrik: 440 V, 3 Phasen, 50 Hz (ca.)
Abmessungen: 9’ x 5’ x 11’6” (ca. 2,74 m x 1,52 m x 3,51 m)
Gewicht: ca. 6 t
iklan kecil
Dortmund
11.215 km
Mesin bor radial
RABOMA12 V 1250
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1955, Drilling capacity in steel St 37 Ø 65 mm
Drilling capacity in cast iron Ø 75 mm
Spindle taper MK 5
Arm reach 1250 mm
Spindle stroke 400 mm
Spindle speeds 22.4 – 1800 rpm
Feed range 0.056 – 0.56 mm/rev
Column diameter Ø 300 mm
Motor power, 2-stage 3.6 / 4.8 kW
Clamping surface, base plate 1320 x 1000 mm
Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm
Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm
Weight 5100 kg
Accessories / Special features:
• Cube table L x W x H 650 x 500 x 500 mm
• Central clamping
• Power feed
Bledstwzk Dspfx Abksr
• Forward/reverse run
• Motorized height adjustment
• Wide speed range up to 1800 rpm
• Coolant system
• Lighting
Siegfried Volz Werkzeugmaschinen
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel
iklan kecil
Bächingen an der Brenz
11.083 km
Bor radial berkecepatan tinggi
DONAUDR 32
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1976, Work table 500mm x 1200mm
Arm travel 600mm
Tool holder MK 4
Drilling capacity 32mm in steel
Tapping device
Coolant system
Electrics 24V control voltage
Emergency stop, dual channel
Drill guard
Completely overhauled in 2025
12 months warranty
New paint finish RAL 7035/7031
Bsdpfx Abownn S Rokslr
iklan kecil
Ennepetal
11.231 km
Mesin bor radial
GIRARDSradialbohrmaschine
Hubungi
Kondisi: bekas, Drilling capacity in steel (diameter) / mm
Throat depth / mm
Bledpfx Aswt Dv Nsbkor
Workpiece height - max. / mm
iklan kecil
Wiefelstede
11.134 km
Mesin bor radial
Raboma12Rh2000
Hubungi
Tahun pembuatan: 1955, Kondisi: bekas, Radial drilling machine, drilling machine, radial arm drilling machine
Bljdsd Enr Iopfx Abkjr
- Arm reach: 2055 mm
- Max. distance from machine table to spindle mount: 1700 mm
- Taper: MT5
- Motor power: 7.5 kW
- Speeds: 11.2–1400 rpm
- Column diameter: Ø 450 mm
- Spindle stroke: 540 mm
- Thread cutting device
- Automatic feed: 0.037–2.0 mm/rev
- Clamping surface: 920 x 1600 mm
- Dimensions: 2580/1110/H3450 mm
- Weight: 6465 kg
iklan kecil
Shildon
11.704 km
Mesin Bor Radial
Asquith6PT 25-120
Hubungi
Kondisi: bekas, Modell: 6 PT 25-120
Seriennummer: P 36589
Baujahr: 1980
TECHNISCHE DATEN
Spindeldrehzahlen: 9,5 bis 1560 U/min
Spindelaufnahme: Morsekonus Nr. 6
Spindelweg: 406 mm (16”)
Vorschübe: 0,132 mm bis 3,21 mm
Arbeitsfläche (Grundfläche): 1360 mm x 2700 mm
Säulendurchmesser: 660 mm (26”)
Hauptmotor: 15 PS
Metrisch und zöllig
Kraftspannsystem
Sicherheitsbremse
Bsdpfev Aybusx Abkolr
Kühlmitteleinrichtung
iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanuport 540
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Dimensions and Travel
Tool Holder: SK 40
Table dimensions: 4000 x 800 mm
Number of T-slots: 6
T-slot spacing: 140 mm
Distance, spindle lower edge (min.): 140 mm
Distance, table top (max.): 740 mm
Drilling radius (min.): 540 mm
Drilling radius (max.): 1590 mm
Travel U-axis: 2,600 mm
Travel Y-axis: 1,050 mm
Quill stroke (Z-axis): 200 mm
Column stroke (W-axis): 400 mm
Machining Capabilities
Drilling capacity (solid material):
St 60: 40 mm
GG 22: 50 mm
Tapping:
St 60: M 36
GG 22: M 42
Main Spindle Drive
AC motor, frequency-controlled: 5.5 kW at 100% duty cycle
Speed range: 15 – 2800 rpm
Torque: max. 250 Nm (constant from 15 – 200 rpm)
Feed Drives
X-Axis AC servo motor: 0.25 kW
Y-Axis AC servo motor: 0.25 kW
Z-Axis AC servo motor: 4.50 kW
W-Axis AC servo motor: 2.50 kW
U-Axis AC servo motor: 2.50 kW
Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse speeds (U/W): 7.5 / 3 m/min
Infinitely variable feed rates: 5 – 2000 mm/min
Feed force: 12,000 N
Accuracy
Positioning accuracy (X/Y axis) over 1,200 mm: ± 0.075 mm
Repeatability (X/Y axis): ± 0.03 mm
Positioning accuracy (Z axis): ± 0.05 mm
Repeatability (Z axis): ± 0.03 mm
Positioning accuracy (W axis): ± 0.05 mm
Repeatability (W axis): ± 0.03 mm
Electrical Data
Operating voltage / frequency: 400 V / 50 Hz
Control voltage: 24 V
Total connected load: 13.0 kVA
CNC Control
Axes: 5 (X, Y, Z, W, U), expandable
Display: TFT flat screen, backlit, easily readable from all angles
Position data: Cartesian or polar, absolute or incremental
Units: mm or inch; angles in degrees
Interpolation: 2 axes (X, Y)
Technology database: Tool management, tool suggestions based on operation type, material-dependent cutting data recommendations
Tool management: Max. 500 tools
Sub-program technology: Yes
Bedpjv If T Tefx Abkolr
Machining cycles: Centering, drilling, tapping,
reaming, countersinking, boring, freely programmable cycle for special tools. Dwell time programmable for each cycle.
Chip breaking / chip removal: Possible in drilling cycle
Hole patterns: Linear, circular, matrix
Basic software: Conversational programming, 38 zero point offsets, rotation
and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry
Zero point determination: Cycles for zero point determination by manual probing of the workpiece for:
- Arbitrarily clamped rectangular parts
- Arbitrarily clamped round parts
- Centering cast and flame-cut parts
- Angle position detection of round parts by probing reference edges/faces
Data interfaces: USB interface
Painting (new paint)
Standard 2-component structural paint
Upper machine section: Light grey RAL 7035
Lower machine section: Signal blue RAL 5005
Documentation
Operating and programming manual
Electrical circuit diagram
Spare parts drawings
Inspection certificate for mechanics, electrics, and safety devices
iklan kecil
Siegen
11.196 km
Mesin bor radial
WEBORB 45
Hubungi
Kondisi: bekas, Drilling capacity in steel (diameter) / mm
Throat depth / mm
Workpiece height - max. / mm
Total power requirement / kW
Machine weight approx. / t
Space requirement approx. / m
Bedpfx Aboud Ttnokelr
Table dimensions: 800x800 mm Height: 590 mm
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanumeric 440
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications
• Worktable 1800 x 600 mm with 4 T-slots
• Arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping system
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servo motor
• 2 T-slots (18 mm) at the rear of the machine base
• 2 T-slots (18 mm) on the left side of the machine base
• Thread cutting device
• Central lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety guard
• USB interface
Dimensions and Travel
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Number of T-slots 4
Distance between T-slots mm 125
Quill stroke (Z-axis) mm 200
Column travel (W-axis) mm 410
Distance spindle underside - min mm 70
Table top max. mm 680
Distance spindle underside - min mm 970
Floor max. mm 1580
Drilling radius mm 540 - 1590
Working table height mm 900
Machining Capacity
Drilling capacity solid St 60 Ø 40
GG 22 Ø 50
Thread cutting St 60 M 36
Bledpfx Asu Aa I Sjbker
GG 22 M 42
Main Spindle Drive
AC motor, frequency controlled kW 5.5 at 100% ED.
Speed range: min-1 15 - 2800
Torque Nm max. 250
Constant from min-1 15 – 2000
Feed Drives
X-axis - AC servo motor kW 0.25
Y-axis - AC servo motor kW 0.25
Z-axis - AC servo motor kW 4.50
W-axis - AC servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5
Rapid traverse speed (W): m/min 3
Feeds, infinitely variable mm/min 5 – 2000
Accuracy
Positioning accuracy X-, Y-axis
over 1200 mm mm ± 0.075
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0
Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800
CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm
Position display: Cartesian or polar, absolute or incremental values
Measuring unit: mm or inch / degrees
Interpolation: 2 axes (X, Y)
Technology Database:
Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subroutine technology: yes
Machining Cycles
Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- Freely mounted rectangular parts
- Freely mounted round parts
- Centering for cast and flame-cut parts
- Angle position detection for round parts by probing reference edges/surfaces
Test graphics: Graphical display of drilling patterns
Data interfaces: USB
iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanumeric 440
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications
• Worktable 1800 x 600 mm with 4 T-slots
• Arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping system
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servo motor
• 2 T-slots (18 mm) at the rear of the machine base
• 2 T-slots (18 mm) on the left side of the machine base
• Thread cutting device
• Central lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety guard
• USB interface
Dimensions and Travel
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Number of T-slots 4
Distance between T-slots mm 125
Quill stroke (Z-axis) mm 200
Column travel (W-axis) mm 410
Bljdpfx Abovv Spkoker
Distance spindle underside - min mm 70
Table top max. mm 680
Distance spindle underside - min mm 970
Floor max. mm 1580
Drilling radius mm 540 - 1590
Working table height mm 900
Machining Capacity
Drilling capacity solid St 60 Ø 40
GG 22 Ø 50
Thread cutting St 60 M 36
GG 22 M 42
Main Spindle Drive
AC motor, frequency controlled kW 5.5 at 100% ED.
Speed range: min-1 15 - 2800
Torque Nm max. 250
Constant from min-1 15 – 2000
Feed Drives
X-axis - AC servo motor kW 0.25
Y-axis - AC servo motor kW 0.25
Z-axis - AC servo motor kW 4.50
W-axis - AC servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5
Rapid traverse speed (W): m/min 3
Feeds, infinitely variable mm/min 5 – 2000
Accuracy
Positioning accuracy X-, Y-axis
over 1200 mm mm ± 0.075
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0
Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800
CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm
Position display: Cartesian or polar, absolute or incremental values
Measuring unit: mm or inch / degrees
Interpolation: 2 axes (X, Y)
Technology Database:
Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subroutine technology: yes
Machining Cycles
Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- Freely mounted rectangular parts
- Freely mounted round parts
- Centering for cast and flame-cut parts
- Angle position detection for round parts by probing reference edges/surfaces
Test graphics: Graphical display of drilling patterns
Data interfaces: USB
iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanumeric 440
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications
• Worktable 1800 x 600 mm with 4 T-slots
• Arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping system
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servo motor
• 2 T-slots (18 mm) at the rear of the machine base
• 2 T-slots (18 mm) on the left side of the machine base
• Thread cutting device
• Central lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety guard
• USB interface
Dimensions and Travel
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Blodpfx Ajrmkfnsbkjr
Number of T-slots 4
Distance between T-slots mm 125
Quill stroke (Z-axis) mm 200
Column travel (W-axis) mm 410
Distance spindle underside - min mm 70
Table top max. mm 680
Distance spindle underside - min mm 970
Floor max. mm 1580
Drilling radius mm 540 - 1590
Working table height mm 900
Machining Capacity
Drilling capacity solid St 60 Ø 40
GG 22 Ø 50
Thread cutting St 60 M 36
GG 22 M 42
Main Spindle Drive
AC motor, frequency controlled kW 5.5 at 100% ED.
Speed range: min-1 15 - 2800
Torque Nm max. 250
Constant from min-1 15 – 2000
Feed Drives
X-axis - AC servo motor kW 0.25
Y-axis - AC servo motor kW 0.25
Z-axis - AC servo motor kW 4.50
W-axis - AC servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5
Rapid traverse speed (W): m/min 3
Feeds, infinitely variable mm/min 5 – 2000
Accuracy
Positioning accuracy X-, Y-axis
over 1200 mm mm ± 0.075
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0
Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800
CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm
Position display: Cartesian or polar, absolute or incremental values
Measuring unit: mm or inch / degrees
Interpolation: 2 axes (X, Y)
Technology Database:
Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subroutine technology: yes
Machining Cycles
Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- Freely mounted rectangular parts
- Freely mounted round parts
- Centering for cast and flame-cut parts
- Angle position detection for round parts by probing reference edges/surfaces
Test graphics: Graphical display of drilling patterns
Data interfaces: USB
iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanumeric 440
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024
Machine Specification
• Worktable 1800 x 600 mm with 4 T-slots
• Cantilever travel 1050 mm
• Drilling spindle SK 40 with automatic tool clamping
• Infinitely variable spindle speed programming
• Stepless quill feed via three-phase servomotor
• 2 x 18 mm T-slots at the rear of the machine base
• 2 x 18 mm T-slots on the left side of the machine base
• Thread cutting unit
• Centralized lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety device
• USB interface
Dimensions and Travel
Tool holder: SK 40
Column diameter: 195 mm
Table dimensions: 1800 x 600 mm
Number of T-slots: 4
T-slot spacing: 125 mm
Quill stroke (Z axis): 200 mm
Column travel (W axis): 410 mm
Distance spindle nose–table (min): 70 mm
Distance spindle nose–table (max): 680 mm
Distance spindle nose–floor (min): 970 mm
Distance spindle nose–floor (max): 1580 mm
Drilling radius: 540 - 1590 mm
Worktable height: 900 mm
Machining Capabilities
Max. solid drilling capacity: St 60: Ø 40 mm
GG 22: Ø 50 mm
Tapping capacity: St 60: M 36
GG 22: M 42
Main Spindle Drive
AC motor, frequency controlled: 5.5 kW at 100% duty cycle
Speed range: 15 – 2800 rpm
Torque: max. 250 Nm
Constant from: 15 – 2000 rpm
Feed Drives
X-axis AC servo motor: 0.25 kW
Y-axis AC servo motor: 0.25 kW
Z-axis AC servo motor: 4.50 kW
W-axis AC servo motor: 2.50 kW
Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse speed (W): 3 m/min
Feed rates infinitely variable: 5 – 2000 mm/min
Accuracy
Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm
Electrical Data
Operating voltage/frequency: 400 V / 50 Hz
Control voltage: 24 V
Hydraulic unit (clamping): 0.75 kW
Total connected load: 13.0 kVA
Weight (Danumeric 440, without packaging)
With 1800 x 600 mm table: 2800 kg
CNC Control System
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm
Position indication: Cartesian or polar, in absolute or incremental values
Units: mm or inch / degrees
Interpolation: 2 axes (X, Y)
Technology Database:
Tool management, tool suggestions by machining type, material-dependent cutting data recommendations
Tool management: max. 500 tools
Subprogram system: yes
Machining Cycles
Standard software options:
Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions
Zero point determination:
Cycles to determine zero points by manual probing of workpieces for:
- Any clamped rectangular parts
- Any clamped round parts
Bodpfou Dg D Aox Abkelr
- Alignment of cast and flame-cut parts
- Angle position detection on round parts by probing reference edges or faces
Test graphics: Graphical display of drilling patterns
Data interfaces: USB
Kami memudahkan pencarian untuk Anda: "bor radial"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.























































































































































