Beli Bubut Double Spindle bekas (25.276)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Technical Data: Gbsdevkfhpspfx Adteg • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 22.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2080594, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 400 mm, jam operasional spindle: 9.500 h, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, CNC Control SIEMENS 840D SL Electrical Connection Supply Voltage: 3 × 400 V / 50 Hz (grounded) Network Type: TN-S or TN-C network Total Connected Load: 133 kVA Power Factor: 0.6 Protection: 200 A gG (5 s) Weight Machine Operating Weight: 20,000 kg Transport Weight: 16,000 kg Tool Magazine Gjdpfx Adoxt D Ezetsbg Tool Change: Pick-up system Tool Management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum Total Tool Weight: 350 kg Feed Drives Type of Drive: Three-phase synchronous motors Travel Measurement System X/Y/Z: Direct, absolute X-Axes (X1 and X2) Rapid Traverse: 100 m/min Max. Acceleration: 12 m/s² Kv Factor: 7 Peak Force: 2 × 10,000 N Continuous Force: 2 × 5,000 N Positioning Accuracy: Tp = 0.008 mm Y-Axis Rapid Traverse: 100 m/min Max. Acceleration: 10 m/s² Kv Factor: 7 Peak Force: 10,000 N Continuous Force: 5,000 N Positioning Accuracy: Tp = 0.008 mm Z-Axes (Z1 and Z2) Rapid Traverse: 100 m/min Max. Acceleration: 20 m/s² Kv Factor: 7 Peak Force: 2 × 5,000 N Continuous Force: 2 × 2,500 N Positioning Accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, dual spindles side by side Motor spindles, liquid-cooled, synchronous drive Spindle Diameter: 40 mm Tool Interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Clamping Force (mechanical): > 18 kN Wear Limit: 16 kN Speed Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Working Area Spindle Distance: 600 mm Travel: - X-axis: 600 mm - Y-axis: 600 mm (optional 875 mm) - Z-axis: 500 mm Workpiece Clamping / Table System Swiveling mount with two separate rotary tables for fixture bridges Swivel time 0–180°: 3.5 s Max. Asymmetric Load: 800 Nm Rotary Table Ø 800 mm, Repeatability: < 0.008 mm Max. Workpiece Weight: 600 kg Peak Torque: 981 Nm Rated Torque: 698 Nm Max. Table Speed: 50 rpm Angular Acceleration: 2.5 – 10 rev/s² Positioning Accuracy: ±5" Tangential Torque: 4,500 Nm Max. Load Torque: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note The system is supplied without product-specific tools, fixtures, or robot grippers.

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Lead dan Feed Spindle Prod. WEILER Tipe: COMMODOR Tahun: 1979 Data Teknis Merek: Weiler Tipe: Commodor Jarak antara pusat: 1000 mm Diameter putar di atas alas: 400 mm Ø lubang spindle: 50 mm Rentang kecepatan putaran: 63-2000 rpm Daya penggerak: 4 kW Dimensi: sekitar P 2,2 x L 1,0 x T 1,7 m Berat: sekitar 1,5 t Perlengkapan • Indikator digital 3 sumbu • Bor chuck • Chuck 3 rahang merek Röhm, D 200 mm • Dudukan Multifix • Chuck 3 rahang tambahan yang terletak di mesin tidak termasuk dalam pengiriman! Gbsdext Ngqjpfx Adtog Semua informasi tanpa jaminan. Demonstrasi operasional dapat dilakukan kapan saja di ruang pamer kami.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 280 mm, lubang spindel: 52 mm, diameter pembubutan: 420 mm, tinggi pusat: 210 mm, panjang pembubutan: 1.000 mm, panjang total: 2.300 mm, lebar total: 1.300 mm, tinggi total: 1.700 mm, kecepatan spindel (maks.): 1.500 rpm, kecepatan spindel (min.): 33 rpm, penjepit rumah spindel: MK 4, Perlengkapan Mesin / Sorotan Heidenhain ND 780 penunjuk posisi digital Röhm chuck 3-rahang, Ø 250 mm Pemegang alat ganti cepat Multifix Perlengkapan pendingin untuk pemesinan yang efisien Pelindung chuck untuk keamanan yang lebih tinggi Dinding belakang penahan serpihan untuk lingkungan kerja yang bersih Godpfxoxqpwkj Adtobg Tahun pembuatan: 1981.

Kondisi: baik (bekas), Mesin bubut L+Z ERNAULT-SOMUA Cholet 435 Gbsdpfx Adexy Uavjtjg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, CNC – 2-Spindle Horizontal Machining Center, used year of manufacture 12/2012 Immediately available / Ready for operation Manufacturer: Schwäbische Werkzeugmaschinen - Schramberg Model: SW BA 322 / Siemens 840 D sl: Windows-based with Power Line servo drive technology Year of manufacture: 12 / 2013 Axes: X 300 mm; Y 450 mm; Z 375 mm Working spindle: HSK 63, 1-10,000 rpm, 25 kW at 4,200 rpm, internal coolant supply 40 bar Tool magazine: pick-up system; capacity 40 (2x20) tool stations Gedpfslxp Ufjx Adtebg Workpiece mounting: swivelling carrier system Q-axis; two independent swivel axes A and U axes Workpiece clamping hydraulics, workpiece support monitoring Coolant system: 1,200 l; paper band filter, cartridge filter, heat exchanger, high pressure pump Chip conveyor: scraper belt conveyor with lifting pump, discharge height 1,100 mm Automatic loading door Automatic rinsing cycle, manual spray gun Machine condition: cleaned, in good and clean condition, filled with necessary fluids and fully operational The machine will be inspected by SW Machine Service prior to collection and can be viewed at any time by appointment. Delivery: by arrangement, free loaded ex works. Subject to prior sale.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) Gbsdpfx Asvivmyodteg About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 23.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2630079, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 650 mm, pergeseran cepat sumbu Y: 120 m/menit, pergerakan cepat sumbu Z: 120 m/menit, produsen pengendali: Siemens, model controller: 840D sl, diameter benda kerja (maks.): 1.830 mm, berat benda kerja (maks.): 800 kg, kecepatan rotasi (maks.): 40 rpm, berat keseluruhan: 28.000 kg, kecepatan spindel (min.): 1 rpm, kecepatan spindel (maks.): 17.500 rpm, jam operasional spindle: 11.000 h, jarak antara spindel: 800 mm, jumlah spindel: 2, jumlah slot dalam magazin alat: 84, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, This high-precision twin-spindle machining center from the SW series is engineered for maximum productivity in high-volume production, particularly for the automotive and supplier industries. The machine features two symmetrically arranged motor spindles, a double NC swivel carrier, and two directly driven rotary tables, enabling simultaneous 5-axis machining and parallel processing. Equipped with a Siemens 840D sl CNC control, minimum quantity lubrication, high-dynamic feed drives, and an 84-position tool magazine, the machine ensures highly dynamic, precise, and energy-efficient machining operations. Its compact design and pick-up capable tool concept guarantee short chip-to-chip times and high machine availability. This machine is ideally suited for demanding precision machining tasks such as housings, structural components, transmission parts, and components made from aluminum, cast iron, and steel in large-scale series production. CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Power system: TN-S or TN-C network Total connected load: 152 kVA Power factor: 0.6 Protection: 250 A gG (5 s) Weight Operating weight: 28,000 kg Transport weight: 24,500 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool stations Capacity: 84 tools (2 × 42) Max. total tool weight: 400 kg Feed Drives Drive type: Three-phase synchronous motors Position measuring system X/Y/Z: Direct, absolute X1 and X2 axes Rapid traverse: 120 m/min Max. acceleration: 10 m/s² Kv-factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Y axis Rapid traverse: 120 m/min Max. acceleration: 11 m/s² Kv-factor: 6 Peak force: 20,000 N Continuous force: 10,000 N Positioning accuracy: Tp = 0.008 mm Z1 and Z2 axes Rapid traverse: 120 m/min Max. acceleration: 20 m/s² Kv-factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin-spindle side by side Spindle diameter: 40 mm Tool interface: HSK-A63 Cooling: Liquid-cooled motor spindles Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated) Machining Area Spindle center distance: 800 mm Travel paths: - X axis: 800 mm - Y axis: 900 mm (optionally 1,200 mm) - Z axis: 650 mm Difference between coupled Z axes: < 1.0 mm Difference between coupled X axes: < 1.0 mm Workpiece Clamping / Table System Double swivel carrier (Q-axis) with two directly driven NC rotary tables (A/U axes) Swivel time 0–180°: 5.0 s Max. asymmetric load: 1,600 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 800 kg Peak torque: 1,900 Nm Rated torque: 1,300 Nm Max. table speed: 40 rpm Tool Change Times: Chip-to-chip at n < 10,000 rpm: > 3.0 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note The machine is supplied without product-specific tools, clamping devices or robot grippers. Gsdpfxjxt D D Rj Adtebg

Kondisi: baik (bekas), diameter putar di atas sled silang: 175 mm, diameter pembubutan di atas alas geser: 310 mm, – Jarak pusat: 750 mm – Diameter ayun di atas tempat tidur: 310 mm – Diameter ayun di atas dudukan: 175 mm – Lubang spindle: 32 mm – Rentang kecepatan putar: 65–2200 rpm – Kecepatan putar dapat diatur tanpa langkah – Indikator kecepatan putar digital – Feed memanjang dan melintang Gjdoxy Ry Eepfx Adtobg – Indikator posisi digital (DRO) – Rem – Pendinginan – Perlengkapan alat – Penerangan – Penutup pelindung – Tombol stop darurat – Dokumentasi – 400V

Kondisi: baik (bekas), Tinggi pusat: 360 mm Jarak pusat: 5000 mm Godpfx Asxtu Duodtebg Diameter putar di atas tempat tidur: 720 mm Diameter putar di atas dudukan pelan: 560 mm Diameter putar di dalam alur: 1000 mm Lubang spindle: 82 mm Rentang kecepatan: 16 - 800 rpm Lebar alas: 445 mm Penjepit tailstock: MK 6 Daya penggerak: 11 kW Dimensi (P x L x T): 6750 x 1500 x 1700 mm Berat: 6500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: baik (bekas), Tahun pembuatan: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special engineering department of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2006 Godpoxyvbnsfx Adtobg EMCO EMCOMAT 14 D Technical data Working area Traverse path in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle nose: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest lathe in the EMCOMAT series. The EMCOMAT 14D is designed for demanding applications: featuring stepless speed control, constant cutting speed, and an impressive 7.5 kW drive power (40% duty cycle). This compact powerhouse is ideal wherever maximum precision is required in limited space, for example in optical, electrical, and automotive workshops, laboratories, and even Formula 1 operations. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only occasionally used for custom-built applications. The control system is very user-friendly. The guideways are regularly lubricated via the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested in our facility. Take the opportunity to inspect and test the EMCO EMCOMAT 14 D under power at our location. You will find additional lathes from reputable manufacturers on our website.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Type 4 Technical Data: Centre distance approx.: 400 mm Centre height over bed: 120 mm 24 spindle speeds: 71 – 2240 rpm Gbsdsxyqm Sjpfx Adtsg Drive power: 0.6 / 0.8 kW Stepless longitudinal feed: approx. 6 – 450 mm/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: Gedpfjxcuazex Adtebg - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Kondisi: baik (bekas), WEILER Praktikant 800 R / Mesin Bubut Poros Utama & Tarik dari lembaga pendidikan - Diameter pembubutan di atas tempat tidur: 300 mm - Diameter pembubutan di atas support: 150 mm - Panjang pembubutan: 800 mm - Lubang spindle: 42 mm - Rentang kecepatan putar: 40–2000 rpm - Feed otomatis longitudinal & melintang - Ulir / Metrik / Imperial - Tailstock MK 3 - Daya motor: 3 KW - Multifix dengan sisipan - Sistem penjepit cepat collet termasuk collet - Pelindung chuck - Dinding penahan serpihan dengan lampu kerja - Tombol darurat - Roda gigi ganti - Center putar + chuck bor - Lemari alat - Dokumentasi Gsdpoxyqxnjfx Adtjbg Dimensi: P x L x T: 1,8 x 0,8 x 1,6 meter / Berat: 750 kg Kesalahan atau kekeliruan data dapat terjadi.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 1.350 mm, lubang spindel: 120 mm, diameter pembubutan di atas alas geser: 1.000 mm, tinggi pusat: 675 mm, panjang pembubutan: 5.000 mm, Heavy Duty Lathes POREBA – Lathes after Complete Overhaul Centre Height: mm 675 Swing Diameter over Bed: mm 1350 Swing Diameter over Cross Slide: mm 1000 Swing Diameter in Gap: mm 1600 Gap Length A1-15/DIN 55027: mm 220 Distance Between Centres: mm 5000 Spindle Bore: mm 120 Main Spindle Taper: metric 130 Front Spindle Bearing: mm 220 Spindle Mounting: Standard / Mounting Bolts M22 ISO-702/I A1-15 Option: DIN 55027/15 Max. Workpiece Weight: • Between Centres: kg 9000 • With 2 Steady Rests: kg 15000 • With Face Plate (unsupported): kg 2000 Bed Width: mm 660 Tool Cross Section (H x W): mm 32 x 40 SPEEDS Mechanical: 18 speed ranges Main Motor Power: kW 45 Number of Speed Steps: 18 Speed Range: rpm 10-500 or 12.5-630 rpm TAILSTOCK Quill Diameter: mm 190 Quill Stroke: mm 300 Cross Adjustment: mm +/- 15 FEEDS Number of Feed Steps: 70 Longitudinal Feed Range: mm/rev 0.07 – 10 Gsdpfxjhmuuys Adtsbg Cross Feed Range: mm/rev 0.035 – 5 Top Slide Feed Range: mm/rev 0.017 – 2.5 Rapid Traverse Longitudinal: mm/min 4000 Rapid Traverse Cross: mm/min 2000

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2025-09/2404095, diameter putar di atas sled silang: 224 mm, lubang spindel: 51 mm, tinggi pusat: 180 mm, diameter quill: 32 mm, jarak gerak quill: 100 mm, panjang total: 1.680 mm, tinggi total: 1.400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing over bed: 360 mm Swing over cross slide: 224 mm Swing without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. tool shank cross-section: 16x16 mm Chuck mounting: D1 - 4 Spindle mount (lathe spindle): MK 6 mm Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of spindle speeds: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Godpfx Aexykafodtobg Metric thread pitches: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Tailstock taper: MK 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Power supply: 400/50 V/Hz Overall length: 1680 mm Overall height: 1400 mm Weight: 520 kg Standard equipment: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw face plate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MK 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial indicator and change gear set - Halogen machine lamp - Emergency stop button / no-volt release - Chuck guard with safety switch - Base frame / chip tray / splash guard - Tool kit / operating instructions / CE marking

Kondisi: baik (bekas), Tahun pembuatan: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the custom manufacturing department of a renowned German engineering company. CE-compliant! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical specifications: Working area Travel in X/Y/Z: 135 / - / 590 mm Distance between centers: 650 mm Center height: 140 mm Main spindle Maximum speed: 4,000 rpm Spindle nose: Size 4 (DIN 55029) Maximum drive power: 7.5 kW Tailstock Quill diameter: 30 mm Gbjdpfxoxyvbbo Adteg Quill taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. Designed for demanding tasks, the EMCOMAT 14D offers stepless speed control, constant cutting speed, and an impressive drive power of 7.5 kW (40% duty cycle). This compact lathe is ideal for environments where space is at a premium, but top precision is essential: for example, in optics, electronics, and automotive workshops, labs, and even Formula 1 applications. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine was only lightly used for special manufacturing tasks. It features an easy-to-use control system. The guideways are regularly lubricated via central lubrication. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our facility. You can find more lathes from reputable manufacturers on our website.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tampilan digital 3-sumbu Gbjdpfoxyh D Ujx Adtog Jarak antara pusat: 800 mm Tinggi pusat di atas tempat tidur: 175 mm Lubang spindle: 46 mm 18 tingkat kecepatan putar, bertingkat: 25 - 2000 rpm Daya sekitar: 2,2 / 4,4 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW Godpfx Aow Idlljdtjbg >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard About the machine: Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.

Kondisi: bekas, Mesin bubut dengan poros utama/pemimpin US 400 (kemungkinan tiruan Weiler) Godpfxovzkpts Adtjbg Panjang pembubutan: 1000 mm Tinggi pusat: 200 mm Multifix B Kecepatan putar spindle: 31 – 2000 rpm Chuck 3-jaw (⌀ 200 mm) Lubang spindle: 45 mm Motor dengan rem Tombol darurat stop Pelindung chuck

Kondisi: baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 8073, Penawaran 25432 Data teknis: - Diameter pembubutan: 320 mm - Jarak antara puncak: 750 mm - Diameter pembubutan maksimum di atas alas: 550 mm - Diameter pembubutan maksimum di atas peluncur: 175 mm - Lubang spindle: 32 mm - Dudukan spindle: - Kerucut dudukan lengan kepala lepas: MK 3 - Perjalanan pinol: 180 mm - 18 kecepatan spindle: 85 - 2000 rpm - Feeding memanjang & permukaan - Ulir metrik - Ulir inci - Ulir modul - Ulir diametral pitch - Dudukan pisau - Chuck rahang - Lunette - Daya: 400 V / 2,2 kW Gbjdpexx Sp Eefx Adtsg - Kebutuhan ruang sekitar: P 2100 x L 750 x T 1300 mm - Berat sekitar: 750 kg

Kondisi: baik (bekas), Tahun pembuatan: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from special machinery production of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working range Travel in X/Y/Z 135 / - / 590 mm Distance between centers 650 mm Center height 140 mm Main spindle Max. speed 4000 rpm Spindle mount Size 4 (DIN 55029) Max. drive power 7.5 kW Tailstock Quill diameter 30 mm Internal taper MT 2 Quill stroke 80 mm Dimensions Size (LxWxH) 1280 x 730 x 1480 mm Machine weight 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest requirements: with infinitely variable speed control, constant cutting speed, and an impressive 7.5 kW drive power (40% duty cycle). The compact powerhouse is ideal wherever maximum precision is required within a small footprint: for example, in optics, electronics, and automotive workshops, laboratories, and even in Formula 1. Godpjxyvaqefx Adtjbg Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital readout, year of manufacture 2006. This lathe is in very good original condition. It comes from a facility where it was used only occasionally in special engineering projects. Very user-friendly controls. The guides are regularly lubricated via central lubrication. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to inspect and test the EMCO EMCOMAT 14 D under power on site. Further lathes from renowned manufacturers can be found on our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock Gedowrmuxepfx Adtjbg >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system >> Machine levelling feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed shaft lathe with brand-new K&C 3-axis digital readout, direct from a training workshop! Technical Data: >> Machine No.: 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C – NEW, 12 months manufacturer warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, quick-zeroing, count direction switch, etc. >> 1 piece 3-jaw chuck NEW, 160 mm with 2 sets of jaws >> 1 piece 4-jaw chuck, 160 mm, with 1 set of jaws Gjdpfew Nw Dqsx Adtsbg >> Collet chuck NEW, and new collets from 2 to 24 mm in 1 mm increments >> Multifix toolpost size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear guard >> Fixed steady >> Machine feet Safety features: electronic spindle guard, 2 emergency stops, change gear box with limit switch, spindle brake About the Machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has undergone a thorough electrical and mechanical inspection by us, including a complete oil change. This newer generation of Weiler lathes is particularly user-friendly. Take advantage of the opportunity to view and test this machine under power at our facility.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1983 Machine no.: 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm Gbedjwb Supjpfx Adtsg >> Spindle bore: 40 mm >> Short taper spindle nose according to DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty, including operation manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 1 piece NEW 160 mm 3-jaw chuck, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine leveling feet About the machine: A used Weiler Condor 81 is offered here in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our premises.