Beli Bubut Double Spindle bekas (27.254)

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), A fully overhauled CNC multi-spindle lathe by Index, refurbished in 2020, is available. Number of spindles: 6, maximum bar capacity: 32 mm, spindle speed: 6300 rpm, weight: approx. 10,800 kg, control system: Siemens Sinumerik. Spindle bearing status measurements in 2024: HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive refurbishment on the spindles, cooling system, bearings, hydraulic lines, and more. Documentation is available. On-site inspection is possible. Fpsdpfjwr Dw Rex Adqon

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 340 mm, lubang spindel: 40 mm, tinggi pusat: 150 mm, panjang pembubutan: 630 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 14 rpm, berat keseluruhan: 1.500 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Schaublin 150A Mesin Bubut Spesifikasi Pabrikan: Schaublin Tipe: 150 Tahun pembuatan: Tidak diketahui Kontrol: Konvensional Diameter putar maksimum: 340 mm Jarak antara senter: 630 mm Spindel Utama Kecepatan putar: 14 hingga 3000 rpm Fitting: Camlock D1-4'' Collet chuck: Schaublin B32 Fitur tambahan Multifix B ditambah 5 dudukan alat Chuck 3 dan 4 rahang Senter buntut Set collet B32 Instalasi pendingin Heidenhain DRO (ND780, 3 sumbu) Lampu mesin Gir reduksi Perangkat penjepit cepat Fedpfx Aew R Edujdqopn Dll.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross-slide: Ø 180 mm Centre height over cross-slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment & accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick clamping unit and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost, size B - LED work lamp - Bed stop - Automatic longitudinal and facing feeds - Electro-mechanical spindle brake, switchable - 2x Emergency stop - Electronic chuck key interlock (via sleeve with switch) - Coolant tank with pump integrated in machine base - Hinged chuck guard - Splash guard panel - Circuit diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very user-friendly and robust. The machine can be demonstrated under power on site. Fjdsvadqzopfx Adqspn All information is without guarantee. Subject to prior sale.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya,

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, 1 Fsdpfxew N Rp To Adqjpn

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 165 mm, lebar di tengah: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and an excellent ratio of footprint to center height/center distance. The Condor B is positioned in size between the Weiler Praktikant and the Weiler Commodor, making it a true all-rounder in any workshop. The machine undergoes a comprehensive partial overhaul in our workshop, ensuring both excellent technical condition and visual appearance. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine on site to verify its condition. Availability: On request Centre height: 165mm Centre distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MT3 Chuck mounting: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Spindle speeds: 22-2800 rpm Possible thread types: Metric, Whitworth, Module, Diametral Pitch Metric thread pitches: 0.18 - 28mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Fjdpew N Np Sefx Adqspn Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more available upon request… Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are at least workshop-inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine - Upon request, we can repaint the selected machine in your desired color - Upon request, you can order additional accessories such as tools - Upon request, we can fit additional accessories such as safety devices - We are happy to arrange shipping and/or installation

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Travel path X/Y/Z: 2200mm/520mm/510mm, Rapid traverse X/Y/Z: 40m/min, Number of spindles: 2, Speed: 10,000rpm, Spindle power: 22kW, Spindle bearing: 95mm, Max. torque: 300Nm, Tool holder: HSK A100, Max. milling capacity: 500cm³, Max. drilling diameter: 50mm, Max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, Spindle-to-table distance min./max.: 250mm/760mm, Max. workpiece weight: 2x 1500kg, Max. tool length: 320mm, Tool stations: 2x 21, Tool clamping force: 45,000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, Weight: approx. 11,000kg, Operating hours: 37,771h. Includes Blechtechnik SHA KMB 900, Volume: 900l, and magnetic chuck. Documentation available. Fpodpfx Adjt E Tp Teqon

Kondisi: belum diuji (bekas), Tahun pembuatan: 1991, Schütte multi-spindle automatic lathe SF 32-6 DNT Project No. Year 1991 6-spindle bar automatic lathe in DNT version (with servo drive for cycle time and spindle speed) max. bar capacity 32.0 mm for bar lengths up to 3.30 m including bar guide and stand - 1 set of cams for cross slides - 1 set of cams for longitudinal slides - Pick-off device - Additional feed on positions 2 and 4 - Thread cutting gearbox - Thread rolling attachment with Fette T 27 thread rolling head - Rotating drilling unit for off-center drilling - Rapid drilling, reaming, and thread cutting spindle - Drive for polygon machining and thread milling attachment - Balluff cam control system - Woerle plain text display - Siemens PLC with plain text display Fpedpfsrrgqzjx Adqjn - 2 swivelling operator panels - Chip flushing box

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, 2 unit mesin bubut CNC bekas dengan sumbu Y dan dua spindle Fedpjw N R Nyjfx Adqjpn Mesin termasuk loader dan aksesori (pemegang alat, rahang, dll.) Data teknis lihat file PDF

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 520 mm, lubang spindel: 71 mm, diameter pembubutan: 800 mm, panjang pembubutan: 3.000 mm, Diameter pembubutan di atas tempat tidur 800 mm, di atas support 520 mm Jarak antara senter 3000 mm Hidung spindle Gr 8, lubang spindle 71 mm Rentang kecepatan putar 11,2 - 1800 rpm Rentang feeding 0,06 - 13 mm/putaran Pitch ulir metrik 0,5 - 160 mm Pinole tailstock - langkah 210 mm, dudukan MK 6 Penggerak utama 15 kW termasuk rapid traverse, lunette tetap dengan kepala rol Fpjdpjw Nvzzofx Adqon Pemegang alat quick change Drehblitz dengan 2 kassett, pengatur putar konis, adaptor pengurang HS 3-sumbu digital Heidenhain ND 970 Chuck 3-jaw D 315 TOS, buku manual

Kondisi: bekas, nomor mesin/kendaraan: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Fpsdpfxeuqb Eme Adqjn Spindle speeds: 42-2,000 rpm Equipped with RSF 3-axis digital readout, one 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Kondisi: baik (bekas), Mesin Bubut L & Z Voest DA 3 Sumbu Monitor Digital Fagor Area pembubutan 330 x 650 mm Kecepatan putar 30 - 2500 rpm Lubang spindle 36 mm Tailstock Mk 3 Aksesori: Chuck Röhm 3 & 4 rahang, Multifix A dengan 4 holder, chuck bor quick-action, live center, kaki mesin. Perangkat collet atas permintaan Dinding pelindung cipratan, pelindung chuck dengan pengawasan elektrik, pelindung start, emergency stop, Ukuran: P 1,45m L 0,8m T 1,5m Berat sekitar 650 kg Fpodew Nbcdepfx Adqjn Kondisi: Baik, cat asli, rel dan kehalusan gerakan sangat baik, semua fungsi OK. Dapat diuji dalam keadaan teraliri listrik Siap muat di D – 88433 Schemmerhofen

Kondisi: baik (bekas), Tahun pembuatan: 1986, Hohlspindel-Drehmaschine für Ölrohre SARO SBF 710X2000 Hergestellt in Rumänien Baujahr: 1986 Haupttechnische Daten: - Max. Durchmesser durch die Hauptspindel: 263,3 mm - Max. Umlaufdurchmesser über Bett: 710 mm - Max. Umlaufdurchmesser über Planschlitten: 400 mm - Max. Umlaufdurchmesser im Bettspalt: 950 mm - Spitzenweite: 2000 mm - Drehzahlbereich der Hauptspindel: 4 – 500 U/min - Hauptantriebsleistung: 22 kW - Maschinengewicht ca. 6,3 t Die Maschine befindet sich in gutem Zustand. Die elektrische Ausrüstung wurde durch eine neue ersetzt. Fodpfx Adsumtbrjqopn Für weitere Informationen kontaktieren Sie uns bitte.

Kondisi: baik (bekas), Tahun pembuatan: 1984, Schuette Multi-Spindle Automatic Lathe Model: Schuette SF 20-6 Cam-controlled Number of spindles: 6 Year of manufacture: 1984 Max. bar diameter: round: 20 mm hexagon: 17 mm AF: 18 mm VK: 14 mm Max. bar feed: 80/(160) mm Number of independent longitudinal slides: 6 Total/travel distance (standard): 63/40 mm Special version up to: 100/63 mm Number of independent cross slides: 6 Fedperrgr Ujfx Adqjpn Total/travel distance middle and upper slides up to: 32/20 mm lower slides up to: 40/25 mm Spindle drum diameter: 224 mm Main machining time min/max: 0.36/150 sec Idle times min/max: 0.45/0.80 sec Spindle speed range: 900–5,000 rpm 2nd range: 355–2,000 rpm Rated drive motor power: 15 kW Connected load: 50 kVA Drive motor speed: 1,500 rpm Length x width (standard version): 3,705 x 1,320 mm incl. bar guide (standard version): 6,335 mm Weight without bar guide and accessories: approx. 4.6 t bar guide: approx. 0.5 t total without accessories: approx. 5.1 t (all information according to manufacturer) Additional equipment: - Pick-off attachment with backworking - Thread cutting gearbox - Separate control panel on operator and rear sides - IEMCA bar loader

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Fedpjw I A Uxsfx Adqopn Tinggi ujung: 120 mm Lubang spindle: 23 mm Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1330 mm Pewarnaan: Reseda hijau RAL 6011 Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori lainnya tersedia sesuai permintaan

Tahun pembuatan: 1985, Kondisi: sangat baik (bekas), Table: 1100 x 900 mm, Fedpfx Adeiu Awxjqjpn 4 speeds: 3000, 5000, 6000, 10000 rpm, Spindle diameter: 50 mm, Motor: 5.5 kW, Feed unit with 3 rollers, Possibility to sell without the feed unit at a lower price

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Schaublin 150 High-Precision Lathe with 2-axis Digital Readout ND780 Technical Specifications: Fjdpfewynluex Adqjpn >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025 - 0.35 mm/rev >> Metric threads: 0.25 – 14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-jaw chuck 160 mm, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck with collets >> Change gears >> Stops >> Coolant system >> 1 box of spare jaws >> Centres >> Operating manual About the machine: For sale is a Schaublin 150 high-precision lathe. The machine is operational, equipped with rapid traverse, and is in good used condition. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Vertical turning lathe – double column with 5 controlled axes – Manufacturer: CKD Blansko / Type: SKD / Year of manufacture: 2008 Refurbishment and overhaul work was carried out in 2019 (completed January 2020); additional work has been/was performed ... The machine can be inspected under power by appointment. TECHNICAL SPECIFICATIONS: Working area: - Table diameter: 4,000 mm - Max. swing diameter: 5,000 mm - Max. workpiece height: 2,500 mm - Max. table load: 50 t C-Axis: - C-axis speed: 0.01 – 2 rpm - Max. torque at table: 35,000 Nm Machine: - Total connected load: 160 kVA - Machine weight: approx. 74 t EQUIPMENT: - Control: SIEMENS SINUMERIK 840D - Automatic tool changer - Pick-up magazine: 1 angle head - Angular milling head - Oil coolant system - Coolant system with paper filter - AC drive for rotary tools - AC drives for X/Z/C/U/W axes - Full enclosure - 2-segment rotary chip conveyor around the table - Hinged belt conveyor - Documentation - CE marking Fpsdpfoww H Ivsx Adqen No guarantee for completeness or accuracy of the technical data and the equipment. – Subject to prior sale – A detailed technical data sheet and further information on equipment available upon request.

Kondisi: bekas, Tahun pembuatan: 1990, diameter putar di atas sled silang: 210 mm, lubang spindel: 31 mm, diameter pembubutan: 320 mm, tinggi pusat: 165 mm, Machine can be tested under power and is fully operational. Includes accessories. Collet equipment is included. Fpedpewpkd Sefx Adqsn

Kondisi: baik (bekas), Tahun pembuatan: 1989, Schüttes multi-spindle automatic lathe Schuette SF 20-6 Cam-controlled Number of spindles: 6 with mechanical gearbox max. bar diameter: round 20 mm AF (across flats) 17 mm AK (across corners) 18 mm VK (across flats) 14 mm max. bar feed: 80 /(160) mm Number of independent longitudinal slides: 6 Total / working stroke (standard): 63 / 40 mm “ “ (special) up to: 100 / 63 mm Number of independent cross slides: 6 Total / working stroke Middle and upper slides up to: 32 / 20 mm Lower slide up to: 40 / 25 mm Spindle circle diameter: 224 mm Main times min / max: 0.36 / 150 sec. Secondary times min / max: 0.45 / 0.80 sec. Spindle speed range: 900 - 5000 rpm in 2nd range: 355 - 2000 rpm Rated drive motor power: 15 kW Connected load: 50 kVA Drive motor speed: 1500 rpm Length x width (standard version): 3705 x 1320 mm incl. bar guide (standard): 6335 mm Weight without bar guide and accessories approx.: 4.6 t Fjdpfx Asrrgqdedqjpn bar guide approx.: 0.5 t total w/o accessories approx.: 5.1 t (all data according to manufacturer information) Equipment: Pick-off device with rear-side machining Thread cutting gearbox with electric clutch Thread cutting spindle Additional longitudinal slides at positions: 1, 2 + 4, 5 Chip chute Hydraulic parts catcher at position 6 Kraft & Bauer CO2 extinguishing system (out of service) electrical: Siemens S5 control system Cam switch box: Balluff Separate control panel/operator panel on operator and rear side Woerle plain text display Electrically pre-equipped for bar loader (n) Other: Prepared for decentralized oil mist separator Machine is available for viewing under power in our showroom!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 150150900039, lebar di tengah: 1.500 mm, berat keseluruhan: 2.820 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Range Between centers: 1,500 mm MACHINE DETAILS Weight: 2,820 kg Fsdpfxjw Hwuro Adqjpn EQUIPMENT Various lathe chucks

Tahun pembuatan: 1989, Kondisi: sangat baik (bekas), 4 kW motor Fpsdpjiu Awusfx Adqon 50 mm diameter spindle

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake Fpodpfx Aevivmyedqjn >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: baik (bekas), Tahun pembuatan: 1991, Schütte multi-spindle automatic lathe 6-spindle with mechanical gearbox - Thread cutting gearbox - Pick-off device Fpodpfxjrrgpyj Adqsn - Rear machining - Chip conveyor - Bar feeder etc. Can be inspected under power!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, WEILER Condor 81 Centre Lathe with Lead and Feed Screw, 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet locking >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev Fpedpfx Adstlu Scjqjn >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm, 40 pcs collets partly double >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre Safety features: >> Lead- and feed screw guard >> 2 emergency stop buttons >> Spindle brake About the machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is, of course, fully functional. The lead and feed screws are fitted with a guard for safety. A very robust and powerful machine. The Heidenhain 3-axis digital readout makes operation easier and more precise. The machine has been electrically and mechanically inspected by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.