Beli Bwo bekas (27)

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Used Machine MAKA PM 270 R 5-Axis CNC Machining Centre for processing wood, plastic, and aluminium. Machine in gantry design, equipped with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) Working areas in 3-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm Nodpfxjvmywqe Aivelg X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse rate: X/Y-axis 45 m/min; Z-axis 24 m/min; A/B-axis 10 m/min Milling unit: - 1 universal unit for 5-axis milling with a 50° inclined head, maximum power 12.5 kW, infinitely variable speed up to 17,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 1 chain tool magazine with 32 positions for tools up to D = 90 mm. With sorted placement, max. up to 160 mm (occupies three positions). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 control circuits for stop "raise/lower" - 2 control circuits for sliding rail "raise/lower" - 2 control circuits for pneumatic "clamping/release" - 2 vacuum control circuits with push button for clamping, automatic reset via CNC programming - 1 chip conveyor integrated in the base frame for removal of chips and small offcuts up to approx. max. 100 x 100 x 100 mm Tools: Tools are not included in the scope of delivery! The system can also be supplied with various tool holders upon agreement. We are happy to prepare a separate offer for this. Vacuum supply: - 1 pc. vacuum pump, approx. 140 m³ suction capacity, including tank with 250 litres capacity for rapid vacuum build-up - 10 vacuum supports with various suction plates - Various clamping fixtures for posts and steam-bent parts - Stops raising/lowering for component positioning Miscellaneous: - Automatic central lubrication - Control cabinet with air conditioning unit - Projection laser Occupational safety: - Moving safety cabin with safety bumpers on the operator side.

Kondisi: baik (bekas), Tahun pembuatan: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact construction with control cabinet integrated into the machine base. CNC control BWO 900C, 1 MB memory, integrated PC. Technical data: Working ranges / working envelope: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm, with fixture height of 120 mm A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 45 m/min. Z-axis: 15 m/min. A/B-axis: 10,000°/min. 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed from 2,000 to 24,000 rpm, rated power from 12,000 rpm onwards. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 travelling drum-type tool magazine for 10 tools up to 60 mm diameter and - depending on tool diameter - up to 130 mm length from zero reference. Nlsdpjir Aq Tofx Aivjg Aluminium worktable 1,000 x 1,000 mm with matrix drilling pattern 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioning unit. Workplace safety: Sliding door for front loading, safety enclosure for the rear of the machine, with side access door, enclosure open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (residual-current device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.