Beli Chiron bekas (99)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 550 mm, produsen pengendali: FANUC, model controller: 18i MB5, This 5-axis CHIRON Mill 800 was manufactured in 2007 and is equipped with a swivel head, bar loader, internal cooling system, and a Knoll paper band chip conveyor. Fitted with a Fanuc 310i Model A5 control unit and HSK-A 63, it includes approximately 20 tool holders. Take the opportunity to purchase this CHIRON Mill 800 mill-turn machining center. Contact us for further information about this machine. Additional Equipment • Includes approx. 20 tool holders • Short bar loader • Knoll paper band chip conveyor HL450/900 Machine Advantages Technical Machine Advantages • Swivel head • Internal cooling supply • HSK-A 63 • Maximum diameter: 65 mm / collets available up to 50 mm Pedpfx Abox D Enrjuepl Additional Information Machine still under power // Main spindle drive with AC motor/ Power: 7.5 kW (100% duty cycle), 22.5 kW (10% duty cycle)/ Speed range: 20 - 9,000 rpm/ Torque: 140 Nm/ Tool Changer: 24 tool stations (expandable to 92 with background magazine)/ Tool shank: steep taper 40 DIN 69871/72/ Max. tool diameter: 75 mm (160 mm with empty adjacent stations)/ Tool change time: approx. 1.5 s (chip-to-chip time: 5.0 s)/ Work Area: Start-up table with chip tray (clamping area: 1,400 × 550 mm²)/ Max. table load: 1,200 kg Control/ Control type: FANUC 18i MB5 (5-axis path control)/ Program memory: 256 KB (expandable to 512 KB)/ Functions: drilling and milling cycles, 3D interpolation, tool radius compensation, macro programming/ Interfaces: RS232C, PCMCIA memory card/ High-speed package (optional)/ Rapid traverse speed: 60 m/min (X/Y/Z)/ Speed range: 20 - 12,000 rpm/ Chip-to-chip time: approx. 2.9 s/ 5-axis swivel head (optional)/ Motor Spindle: Power: 25 kW (100% duty cycle), 40 kW (10% duty cycle)/ Speed range: 20 - 20,000 rpm/ Tool interface: HSK-A 63/ Swivel Axis: Range of motion: ±100°/ Indexing accuracy: ±10 arc seconds/ Drive torque: 280 Nm/ Coolant and Chip Handling/ Standard coolant system: Tank capacity: 200 l/ Pump output: 80 l/min at 1.5 bar/ High-pressure coolant option (70 bar): Delivery rate: 20 l/min (30 bar) to 11 l/min (70 bar)/ Chip conveyor (option): scraper belt with container (150 l)/ Measuring Technology Renishaw probe (OMP 40): Automatic workpiece measurement and machine compensation/ Ruby ball Ø 4 mm/ Electrical Connection & Environment/ Power supply: 400/230 V ±10%, 50 Hz/ Compressed air: min. 6 bar/ Ambient temperature: 10-40 °C/ Optional Equipment: Background magazine: 92 tool stations/ Bar Machining: Turning spindle for bars up to Ø 65 mm/ NC slide for bar feed (60 m/min)/ Automatic grease lubrication/ Automatic loader for short bars (ILS-RBK-10012)/

Tahun pembuatan: 2021, jam operasional: 9.159 h, Kondisi: bekas, nomor mesin/kendaraan: 374-19, dokumentasi terlampir sebagai PDF Ppodjyciu Iopfx Abuol

Tahun pembuatan: 2021, jam operasional: 16.807 h, Kondisi: bekas, nomor mesin/kendaraan: 374-20, dokumentasi terlampir sebagai PDF Psdpoyciu Ujfx Abuspl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 530 mm, jarak gerak sumbu Z: 450 mm, produsen pengendali: FANUC, model controller: 31i-B5, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.000 W, berat alat: 8.000 g, jumlah sumbu: 5, This 5-axis CHIRON FZ18W was manufactured in 2019 and is equipped with a FANUC 31i-B5 CNC and true 5-axis continuous control. It features a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. With its automatic pallet changer and two rotary tables, it is ideally suited for complex machining applications. If you are looking for a high-quality milling machine, consider the CHIRON FZ18W we have for sale. Contact us for more details. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: • AC spindle motor: 7.5 kW (100% duty cycle), 22.0 kW (10% duty cycle) • Maximum torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm • Tapping capacity: M30 • Milling performance: 500 cm³/min (Steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max. tool diameter: 78 mm (160 mm with adjacent pockets empty) • Max. tool length: 380 mm • Max. magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 - 1.2 - 1.4 g • Drives: Digital direct drives with absolute measurement system • Machine functions/features: Pjdpfx Abeyaz Emsuepl • Automatic flushing of work area and fixtures • Automatic centralized lubrication with grease • Hydraulic unit: 200 bar • Compressed air preparation with filtration to 0.01 µm • Cooling unit for machine components • Measurement, monitoring, software: • FANUC 3D collision control • Tool monitoring and sister tool management • Electricity & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robotics, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (changeover time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max. clamping torque: 1,200 Nm • Max. load per side (APC): 250 kg • Max. weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (prepared) • High-pressure coolant system up to 30 bar • Coolant filtration: Drum filter TPF 350 S (50 µm) • Chip conveyor: hinged belt • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q touch probe (prepared) • Laser tool breakage control (Single F1000)

Kondisi: siap digunakan (bekas), termasuk pemegang alat Ppedpfxeyaxyho Abujl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 16.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 259-45, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 550 mm, model controller: Siemens 840 D, kecepatan spindel (maks.): 12.000 rpm, RINCIAN TEKNIS Perjalanan Sumbu X: 800 mm Perjalanan Sumbu Y: 550 mm Perjalanan Sumbu Z: 550 mm Tipe Dudukan Alat: HSK 63 Putaran Spindel: 12.000 rpm Jumlah Tempat Alat: 65 RINCIAN MESIN Kontrol: Siemens 840 D Jam Operasi Spindel: sekitar 16.000 jam Ppedpfx Aboyfum Usuol PERLENGKAPAN Konveyor serbuk Knoll Filter pita kertas Knoll Sistem penjepit titik nol System 3R GPS 240 Sistem pengukuran laser Blum LaserControl Sensor pengukuran digital 3D Renishaw Antarmuka otomatisasi Pintu otomatis Sistem penyedot kabut oli Pendingin internal

Kondisi: bekas, Tahun pembuatan: 2008, Mesin frais Chiron FZ 12 W, mesin ini tahun produksi 2008 dan masih dalam kondisi sangat baik. Dijual karena mesin dioperasikan dengan oli dan hanya digunakan untuk operasi pengeboran ringan. Psdpsydu U Aofx Abuspl Sistem ekstraksi dan perlengkapan tidak termasuk dalam penawaran.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 630 mm, jarak gerak sumbu Z: 550 mm, model controller: Siemens 840D solution line, kecepatan spindel (maks.): 12.000 rpm, translation-1 Ppsdpoyfgf Njfx Abujl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 550 mm, berat keseluruhan: 9.600 kg, kecepatan spindel (maks.): 6.000 rpm, en Ppjdpfx Absyaagpjuel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 5.000 h, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 840D, berat keseluruhan: 3.600 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 2.200 W, jumlah sumbu: 3, This 3-axis vertical machining center CHIRON FZ 08K W was manufactured in 2004. It is equipped with a Siemens 840D control unit, offering rapid traverse speeds of up to 60 m/min and a high-pressure coolant system up to 150 bar. With approximately 5,000 operating hours and a robust 24-station tool changer, this is an outstanding opportunity to purchase the CHIRON FZ 08K W vertical machining center. Please contact us for further information regarding this machine. Additional equipment: • Options: Optionally expandable to a 4th and 5th axis (e.g. rotary table or swivel axis) Machine Advantages Technical Features: • High-pressure coolant system: up to 150 bar (programmable) • Chip conveyor: scraper belt with 110-liter bin • Filtration: dual-switching 60-μm filter • Main drive: digital, air-sealed • Max. torque: 23 Nm • Acceleration: X/Y 0.7 g, Z 1.0 g • Tool changer type: pick-up chain magazine (fully enclosed) Ppedoyaafrjpfx Abujl • Tool change time: 0.8 s (controller dependent) • Chip-to-chip time: approx. 2.2 s Additional Information: Machine acquired as a retrofit Power supply: 400/230 V three-phase, 50 Hz, N/PE Compressed air: min. 6 bar (±1 bar) Ambient temperature: max. 40°C Splash guard: Fully enclosed with stainless steel panels Safety: CE compliant (no RCD required) Workpiece handling: Workpiece changer: 0/180° with steel sheet partition Clamping area: 2 x 550 x 300 mm² Max. load capacity: 200 kg per side (max. 50 kg difference) Workpiece change time: Approx. 2.0 s (depending on weight) Media: High-pressure coolant system: Up to 150 bar (programmable) Chip conveyor: Scraper belt with 110-liter container Filtration: Dual-switching 60-μm filter

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, produsen pengendali: SIEMENS, model controller: Sinumerik, CHIRON FZ 18 W 4-sumbu ini diproduksi pada tahun 1993. Mesin ini dilengkapi dengan dua sumbu ke-4 dan sistem kontrol SIEMENS SINUMERIK yang meningkatkan presisi dan efisiensinya. Konveyor serbuk tambahan berkontribusi pada lingkungan kerja yang bersih. Manfaatkan kesempatan ini untuk membeli pusat pemesinan vertikal CHIRON FZ 18 W ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Keunggulan Mesin Ppsdpfx Aoyaaduebuel Keunggulan Teknis Mesin • Sumbu: 4 dengan 2x sumbu ke-4

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, gerak cepat sumbu X: 75 m/menit, pergeseran cepat sumbu Y: 75 m/menit, pergerakan cepat sumbu Z: 75 m/menit, daya nominal (semu): 17 kVA, tinggi total: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.600 mm, berat keseluruhan: 3.400 kg, kecepatan spindel (maks.): 30.000 rpm, hidung spindel: HSK40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, cnc-chiron-fz08-hsp Ppjdox U U Hbepfx Abujl

Kondisi: bekas, Tahun pembuatan: 2010, Palettes: 2 Number of axes: 4 pcs. Tool holder: HSK 63 Tool stations: 60 Weight: 9,600 kg Spindle speed: 18,000 rpm Coolant filtration system: Yes Ppodpfjqn A Rkex Abuol Chip conveyor: Yes

Tahun pembuatan: 2000, Kondisi: bekas, Serial number 143-86 X-travel 550 mm y-travel 300 mm z-travel 425 mm Operating hours 58,046 h Internal cooling no Max. spindle speed 10,500 rpm 4th axis no Ppjdper D Tu Djfx Abuol Control unit Siemens Sinumerik 810D Weight 4,600 kg

Kondisi: bekas, Tahun pembuatan: 2000, Number of axes: 4 units Pallets: 2 Ppodpfx Aswhq Disbuel Tool changer: 20 positions Spindle speeds: 20,000 rpm Control: Siemens 840 D Tool holder: HSK 63 Weight: 6,670 kg Machine no.: 143-68

Kondisi: bekas, Tahun pembuatan: 1995, x-travel 2000 mm y-travel 425 mm Pedpfjr D Tu Iex Abuspl z-travel 425 mm Operating hours cannot be read h Cooling Yes Max. spindle speed 10,500 rpm 4th axis Yes Control Siemens Sinumerik 810 Weight 6,700 kg

Kondisi: siap digunakan (bekas), Verfahrweg X/Y/Z: 650mm/400mm/425mm, Tischdimensionen X/Y: 545mm/540mm, max. Tischbelastung: 500kg, Drehzahl: 10000U/min, Werkzeugplätze: 20, Eilgang: 30m/min, Vorschub: 20m/min. Maschinendimensionen X/Y/Z: ca. 3400mm/2100mm/2800mm, Gewicht: ca. 5500kg. Eine Besichtigung vor Ort ist möglich. Psdpfx Asycwrbobuspl

Kondisi: bekas, Tahun pembuatan: 2007, Immediately available from location: CNC Vertical Machining Center CHIRON Model: Mill 2000 highspeed Year of manufacture: 2007 Siemens Sinumerik 840 D Clamping surface: 2600 x 550 mm Travel X/Y/Z: 2000/500/550 mm Reinforced spindle drive: 47.2 kW, 17 kW at 100% duty cycle Spindle speeds: 20 – 12,000 rpm Spindle mount: SK 40 2 x 4th axis with horizontal faceplate Tool changer: 40 positions (instead of 24) Drilling capacity: 45 mm, tapping M 33, milling capacity: 700 cm³/min Clamping table: 100 mm deeper ICS (internal coolant supply) Coolant system HL 450/900 Ppjdpfoycb Itex Abuel Chip conveyor Rotary table package with horizontal faceplate fully installed NC rotary table, 280 mm diameter Remote diagnostics and teleservice Portable mini handwheel High speed package: all axes rapid traverse 60 m/min 2 x extraction units as air cleaners Measuring probe for automatic in-machine measurement Renishaw probe package OMP 40 Stainless steel bellows on X-axis Central partition Many tools, many holders Weight: 13.5 tons Offered at: EURO 17,500.— plus VAT, ex-location

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 29.688 h, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 630 mm, jarak gerak sumbu Z: 550 mm, produsen pengendali: SIEMENS, model controller: 840D-SL, tinggi total: 1.350 mm, berat keseluruhan: 110 kg, kecepatan spindel (maks.): 20.000 rpm, daya motor spindle: 60.000 W, jumlah sumbu: 4, This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It features a single-spindle head, HSK-A 63 tool interface, and a maximum spindle speed of 20,000 rpm. The machine offers an X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse rates of 75 m/min. Take advantage of this opportunity to purchase the CHIRON Mill 2000 High Dynamics vertical machining center. Contact us for more information about this machine. Additional Equipment • Rated pressure: 200 bar • Test pressure: 260 bar • Temperature range: -10 to 120 °C • Bypass opening pressure: 7 bar • Differential pressure indicator: 5 bar • Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V • Maximum switching current: 1 A • Switching capacity: 70 W • Protection class: IP 65 • Weight: 37 kg • Lubrication: oil-air • Maximum hydraulic fluid reservoir temperature: 55°C Benefits of the machine Technical Advantages of the Machine • Main spindle max. torque: 75 Nm Pjdpfxex D Dr Ae Abujpl • Spindle head version: Single spindle Additional Information No swiveling spindle head. Cooling unit for the control gear: Dimensions: 400 mm (W) x 950 mm (H) x 260 mm (D) Set flow rate: 40 l/min Discharge pressure at 50 Hz: 4.0 bar Rated power: 1.5 kW Maximum rated current: 4.1 A Unit: Dimensions: 600 mm (L) x 600 mm (W) x 1350 mm (H) Weight: 110 kg Rated connection power: 4.60 kW Maximum rated current: 9.20 A Maximum fuse rating: 16 A Table rotary table: Transport load without counter bearing: 300 kg Max. axial load: 9000 N Max. radial load: 40000 N Max. tilting moment: 2000 Nm Max. transferable torque from worm to worm gear: 30 Nm Counter bearing: Transport load for vertical use with rotary table NC1.03: 600 kg Required clamping pressure of the hydraulic fixture (nominal pressure): 75 bar Permissible clamping pressure of the hydraulic clamp: 85 bar Permissible peak pressure of the hydraulic clamp: 120 bar Permissible tangential moment with hydraulic clamp: 1000 Nm Dimensions Machine depth: 600 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 4, Bediengerät Marke SIEMENS Modell 840D Hauptantrieb Werkzeugaufnahme HSK-A 63 Anzahl Achsen 4 Ppjdpfx Asx D Nmxebusl Dieses 4-Achsen-Vertikal-Bearbeitungszentrum CHIRON DZ 18 W wurde 2021 hergestellt. Nutzen Sie die Gelegenheit, dieses CHIRON DZ 18 W Vertikal-Bearbeitungszentrum zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsarten Fräsen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Dijual sebuah pusat pemesinan Chiron tipe FZ 08 W yang berfungsi dengan baik. Ppsdpfx Ajx Swg Ssbuel

Kondisi: bekas, Tahun pembuatan: 2014, de_maschine_cnc_technische_daten_1 Pjdpfx Absyan Rcjuopl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, HEIDENHAIN_iTNC_530 Podjx R Uxpjpfx Abuepl

Kondisi: bekas, Technical Details: X-travel: approx. 1000 mm y-travel: 400 mm z-travel: 420 mm Control: Siemens Sinumerik 805/810 Thread cutting up to max.: M 22 Drilling capacity in St 60 - solid drilling: 25 mm Ppjdpou Idnmsfx Abujl Milling area: Performance in St 60: 150 mm Saw stroke: approx. 55 mm Speed range - stepless: 20-6000 rpm Operating hours (manual): 26,180 h Tool turret: 12 positions Tool holder: SK 40 Total connected load: 18 kVA Machine weight approx.: 5.0 t Machine dimensions LxWxH: 2.9x2.5x2.8 m Transport dimensions (machine): 2.4x2.6x2.75 m Equipment: - Special equipment/fixture (modular clamping system) for milling profile materials, including automatic cut-to-length device for workpieces using a circular saw module (non-functional) - Horizontal workpiece clamping (force-fit) with vise clamping system and parallel strips (currently approx. 80 mm) - Tool changer type: Chiron basket tool changer - Mechanical tool clamping, clamping force 5000N - Chip conveyor, make: Knoll - Loading and unloading system: FMB LM RP 3000 The machine is not operational. Sale at clearance price only.

Kondisi: bekas, Tahun pembuatan: 2003, Pusat permesinan 5 sumbu Chiron FZ 12 KS, tahun produksi: 2003. Data teknis lebih lanjut dan foto tambahan tersedia atas permintaan. Ppjdex T A Rxopfx Abuol