Beli Cloos Robot bekas (51)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 306 431, jenis arus masuk: tiga fasa, tinggi total: 2.165 mm, lebar total: 1.800 mm, panjang total: 3.000 mm, berat keseluruhan: 1.250 kg, tegangan masuk: 400 V, jenis pendinginan: udara, Perlengkapan: kabin, Year of manufacture: 2021. Purchased used in December 2022. Inspected, serviced, and adjusted by a specialist company in April 2023. Since then, the machine has only run for a few hours in test operation. Nsdpfxoulw E Se Abujwb

Kondisi: belum diuji (bekas), Manufacturer: Cloos Model: Romat 56 Njdpovxqy Tofx Abujwb The device has not been tested and its condition is unknown. Sold with the accessories shown in the pictures.

Kondisi: belum diuji (bekas), Manufacturer: Cloos Type: Romat 76 S Njdevxqzqspfx Abuowb The device has not been tested and its condition is unknown. Sold with the accessories shown in the pictures.

Kondisi: bekas, Tahun pembuatan: 2007, Table diameter: 4,520 mm Table load capacity: 35,000 kg Swivel range: 110 degrees Total power requirement: 44 kW Machine weight approx. / t Space requirement approx. / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m movable beam / CR-200000N / Hydraulic scissor lift table Scope of delivery: Pos. Description 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parked position) 7 Cross-travel unit QVEB 8 Robot ROMAT 350 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear travel unit LVEB 15 Vertical travel unit VVEs 16 Sliding door 2 The disc ring on the table is a device which is not included in the scope of delivery. ----- Technical Data - Mechanical dimensions (without control and add-ons): approx. 6,440(5770)x4,520(2700)x5,460(3320) LxWxH - Turntable diameter: 4,520 mm - Weight: approx. 25,000 kg (without add-ons) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load: 35 tons (as per load chart) Ambient temperature Storage / Transport: 0 to 60°C Operation: +4 to 35°C Interfaces Central transfer point for control, power supply, and ground connection ----- 2.3 Linear Travel Unit, LVEB Type: LVEB-120000N 4m Dimensions W x D x H: 7,700 x 2,440 x 776 mm Weight: 4,355 kg Travel distance: 4,000 mm Load of travel carriage: 120,000 N Drive Gear motor: Precision bevel gear motor Manufacturer: Stöber Type: K402VF0250EK703V Power: 4.21 kW Voltage UKE: 140 V / 1,000 rpm Current rated IN: 8.32 A Holding current I0: 9.04 A Motor speed: 3,000 rpm Gear ratio: i = 25.28 ----- 2.4 Vertical Travel Unit, VVEs Type VVEs-5m Dimensions W x D x H: 2,000 x 1,960 x 7,150 mm Weight: 9,500 kg Travel distance: 5,000 mm Max. moved mass: 18,000 N Drive Gear motor: Bevel gear motor with brake Manufacturer: Stöber Type: K713VF0790MQ30ED704B Power: 4.8 kW Motor speed: 2,000 rpm Gear ratio: i = 78.83 (20181/256) ----- 2.5 Cross Travel Unit, QVEB Type QVEB-2m Dimensions W x D x H: 1,270 x 4,100 x 756 mm Weight: 1,950 kg Travel distance: 2,000 mm Load of beam: 10,000 N Max. moved mass: 18,000 N Drive Gear motor: Precision parallel-shaft gear motor Manufacturer: Stöber Nwodpfx Absrmulvouob Type: FS202VQ0145ED402U Power: 1.43 kW Voltage UKE: 140 V / 1,000 rpm Rated current IN: 2.86 A Holding current I0: 3.1 A Motor speed: 3,000 rpm Gear ratio: i = 14.65 (3180/217) ----- 2.6 Rotary Indexing Table Type CR-200kN Manufacturer: Cloos Dimensions W x D x H: 1,820 x 2,120 x 541 mm Weight: 2,850 kg Drive Gear motor: Bevel gear motor Manufacturer: Stöber Type: K814VG1540EK803U Power: 6.7 kW Motor speed: 3,000 rpm Gear ratio: i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position: 1,900 x 600 x 1,500 mm Weight: 205 kg...

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Complete system consisting of: 1 Qirox QRC 350-E welding robot incl. QC2 adv. controller, 1 Qirox QRC 410-E welding robot incl. QC2 adv. controller, programming hand terminal with 25 m cable, 24 V buffering, 2 GB flash drive Software extensions per robot: Gas nozzle sensor, arc seam tracking, multilayer technique, point editor, transformation, 15" TFT with touch panel on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Nedewgd Hzepfx Abujwb Robot 1 welding equipment single-wire tandem with automatic torch changing system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single welding torch MRW 510 evo, duo drive CDD 2, individual torch inspection gauge as well as with CDD, mechanical single-wire cleaning with external cleaning, pressure booster, 1 tandem torch ZMW 850 evo, duo drive tandem CDD-T, individual torch inspection gauge as well as with CDD, mechanical tandem cleaning with external cleaning Floor track 50 kN, track length 26 m, 1 C-frame with vertical slide, 1.5 m travel for robot 1, 1 fixed C-frame for robot 2 2 WPST-30 kN rotary positioners electrical axis, synchronized drive, designed as rotators for supporting roof trusses (min. size 70x180 mm, max. 400x900 mm, load capacity 4,000 kg), on a motorized transfer rail, max. clamping length approx. 19 m 1 L-manipulator WPS-TS 20 kN, rotation radius 2750 mm Connection control, 2 light barriers for floor track safety, 2 start preselection, partition walls and sliding gates with end switch safety, 2 bumpers for floor track safety of both carriages, signal light for system status. Both robots can weld on the roof trusses, and robot 2 can additionally weld on the L-manipulator. 1 Tecau 6000 filter unit, 3,000 m³/h extraction capacity, 2 travelling extraction hoods with curtains, suction slot duct Delivery: Available immediately. Delivery date by arrangement. Inspection under power possible.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, cloos-romat-320-description Nwjdpfx Absxghrrsuob

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jumlah sumbu: 6, This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum payload of 15 kg, a workstation reach of 3400 mm, and is equipped with the advanced V6 control system. The robot comes with a 450A Qineo Pulse A welding machine, ensuring precise and efficient welding operations. Both a touch sensor and an arc sensor are included to enhance operational accuracy. Take advantage of this opportunity to purchase the CLOOS QRC 350 QIROX welding robot. Please contact us for more information about this machine. Nwodpfx Aeyaliiobuob Additional Equipment: • High-quality control panel with wall mount and cable holder • External gas cleaning unit • Adjustable electro-pneumatic valve • Wire feed units Machine Advantages Technical Advantages: • Integrated welding interface and software • Protective tube for connections • High user-friendliness with movable counter-support • Workstation reach: 3400 mm • Longitudinal travel speed: 1.8 m/sec • Longitudinal travel path: 7000 mm • Qineo touch sensor: 60 V • Arc sensor for weld seam adjustment Additional Information: Includes standard-height robot stool and a computer interface for enhanced user-friendliness. Control Unit Control: V6 Advanced Digital inputs and outputs: 16 USB ports: 2 Connectivity: expandable up to 16 axes, CAN bus, serial interfaces

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload capacity of 10 kg and a working range of Ø 3900 mm. Equipped with the advanced QC 2 control system, it comes with a handheld programming unit and supports the new tandem processes for both push and pull welding operations. This unit is ideal for high-quality welding applications and is fitted with comprehensive welding and sensor technology. Please contact us for further information regarding this machine. Machine Advantages Technical advantages: • Working range: Ø 3900 mm • Touchscreen programming pendant • Qirox technology interface • CTMS tool management • TCP measuring device Additional Information Welding Technology - Power source - Arc sensor - Water cooling module - Control module - Wire feed unit - Robot welding torch Software - Parameter loops - Distance-dependent parameter list switching - Multilayer welding technology - Programmable weave patterns - Software language: German IRPS Scanner - IPC control - Rittal control cabinet - Touchscreen - Scanner interface - Uninterruptible power supply - Scan width: 1000 mm at 500 mm product height - Scan speed: 300 to 1000 mm/sec Torch cleaning unit - Torch cleaning device - Pneumatic amplifier - Wire cutter Nwjdpfjyaimljx Abueb Control Unit - Digital inputs/outputs: 16 - Serial interface - Computer connection: QIROX control - CAN-bus - USB interfaces: 2 - Flash memory: 8 GB - Buffer module: 24V - Point editor - Expandable up to 16 axes

Kondisi: bekas, Tahun pembuatan: 2000, Stromstärke bis 300 A Brennerköpfe. Njdjyacp Hspfx Abujwb Raumbedarf ca. ... m

Kondisi: bekas, Tahun pembuatan: 2000, current_translation_001 Nwodpeyacpyefx Abueb

Kondisi: baru, Dijual satu set industri yang digunakan untuk pekerjaan pengelasan dari CLOOS – produsen sistem otomasi Jerman yang ternama. Paket terdiri dari: Poros berlubang (Hohlwelle kurz für W) • Kode: SA-Nr 455799, nomor bagian • Konstruksi baja yang kokoh • Produksi: 25.05.2018 • Kondisi teknis sangat baik, disimpan di gudang, terdapat sedikit jejak korosi permukaan Nwodpfxjw Rdyze Abusb Bracket besar / adaptor pemasangan (terlihat slot posisi) • Struktur berat dan solid • Kompatibel dengan poros – untuk pemposisian/rotasi elemen kerja • Tanpa kelonggaran, semua terpasang dengan kuat • Dudukan berkode dan lubang dalam Set ideal untuk: • positioner pengelasan • lengan robot industri • adaptasi penggerak dan gearbox

Kondisi: baru, Tahun pembuatan: 2024, Perangkat pelatihan terdiri dari: 1 robot las Qirox QRC 350 termasuk unit kontrol, alat pemrograman manual, catu daya 24 V, koneksi komputer (di sisi lemari), flash drive 2 GB; sensor nozzle gas, pencarian jalur busur, teknik multilapisan, editor titik; Qineo Next 452 dengan modul operasi Premium, feeder kawat, paket selang torch, torch las MRW 510 evo, alat ukur torch, pembersihan mekanis, penguat tekanan; rel lantai 20 kN, lintasan 6 m, robot terpasang pada dudukan C dalam posisi menggantung. 2 perangkat rotasi dengan penyangga TC 5 kN, kapasitas beban 1000 kg, panjang penjepitan 3,0 m; kontrol koneksi, 4 penghalang cahaya, 2 pemilihan awal mulai. Waktu pengiriman: 6–8 minggu. Garansi: 24 bulan. Nwedjcmbnyepfx Abujb

Kondisi: baru, Tahun pembuatan: 2019, jam operasional: 135 h, System consisting of: 1 Qirox QRC 410 welding robot incl. QC2 adv. control unit, programming hand device, 24 V buffer, PC-side controller interfacing, 2 GB flash drive Gas nozzle sensor, arc seam tracking, multilayer welding technology, point editor, QTI, QWP Qineo Puls 600 with Master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch gauge, mechanical cleaning, pressure intensifier, Floor track 20 kN, track length 12 m Nwedswhxiajpfx Abuob Interface control, 1 light barrier, 1 pre-start selection, Delivery: ex stock. Subject to prior sale. Robot is mounted in a suspended position on a C-frame. System can be retrofitted for 2 workstations and supplemented with available manipulators from stock.

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 300 h, Fungsionalitas: berfungsi sepenuhnya, de-hu-001 Nwjdpfoxvbw Hox Abujb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 29.000 h, Sistem robot las Cloos terdiri dari: Robot ROMAT 350 dengan kontrol ROTROL II V 4. (Opsional retrofit komputer ke versi 2025), sensor nozzle gas, pencarian seam busur, editor titik, mesin las Qineo Puls 600 (600 A), pengumpan kawat, torch las MRW 510 evo, paket selang torch, pembersihan mekanis, penguat tekanan. 1 manipulator L WPEK 25000, kapasitas angkut 2500 kg, radius rotasi 1500 mm, tinggi pemasangan 945 mm. 1 tiang C dengan luncuran vertikal, panjang lintasan 1500 mm, panjang lengan 2750 mm. Tirai cahaya, pra-pilihan start. Sistem dalam kondisi sangat baik dan hanya digunakan untuk tugas pengelasan TIG sederhana. Servis dan perawatan dilakukan sebelum pengiriman. Nsdpfxsw Razzo Abuswb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 2.900 h, Fungsionalitas: berfungsi sepenuhnya, de2hu2it2lt Njdpfx Aox Iu R Hobuswb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Robot ROMAT 320, ROTROL II controller including connecting cable, programming hand-held device, gas nozzle sensor, point editor, pedestal base Welding machine MC 3 353 (350 A), wire feed unit, welding torch, hose package, mechanical cleaning, pressure amplifier 1 manipulator QR-WP-TC 2.5 kN, rotation radius 400 mm, load capacity 150 kg, overhaul of drive motors 1 light barrier, 1 start preselection, 1 service door with safety interlock switch Nedpfx Asizkbpjbujwb Base frame with partition walls, extraction hood Delivery time: approx. 3 months. Subject to prior sale. The system will be cleaned and serviced prior to delivery. Warranty: 3 months on material, services not included. Installation and commissioning available upon request.

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 300 h, Fungsionalitas: berfungsi sepenuhnya, 1 Nwsdpfx Aoxvbu Esbujb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya,

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), Cloos welding robot Qirox QRC 320 incl. V6 control unit, Nwedpfx Absizwv Neueb base pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary-tilt table WPK 5000, load capacity 500 kg, 1 job selection panel, 1 control unit for customer-supplied sliding door gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional, identical rotary-tilt table is possible.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, roboter_qrc300_neuwertig_2022 Njdpfxoiyp Naj Abujwb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Cloos welding robot Qirox QRC 350, year 2016, incl. QC 6 controller, year 2013 C-type stand for suspended robot mounting, newly painted Cloos welding machine Qineo Champ 600, with wire feed, welding torch, torch hose package, mechanical cleaning, pressure booster 2-station indexing table with H-frame and rotary fixtures WPG 5000, load capacity per station 500 kg, faceplate distance 2200 mm, swing diameter approx. 500 mm. Table newly painted, all motors overhauled Arc protection on the indexing table, 2 swing doors, 1 start preselector, 1 light barrier Gas nozzle sensor, arc seam tracking, point editor System will be fully overhauled and serviced before delivery. Pre-acceptance in Burbach possible. Nwsdpfxogz S Tws Abujb With short-term order, delivery still possible in 2024.

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 42.000 h, Fungsionalitas: berfungsi sepenuhnya, 2 Nsdjw R T Twspfx Abujwb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, CLOOS QRH 390 ini diproduksi pada tahun 2013. Dilengkapi QRH 390 dengan QIROX Controller V6 dan dudukan C MH=24330. Dengan teknologi pengelasan canggih dan sistem ekstraksi, robot las ini sangat ideal untuk meningkatkan kapasitas produksi Anda. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Nedpfx Absx S Siueuowb Jenis Aplikasi Pengelasan

Kondisi: bekas, Tahun pembuatan: 2013, Roboteranlage-Description-001 Nwedpox Atp Isfx Abujb