Beli Colchester Master 2500 bekas (57)

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 42 mm, tinggi pusat: 165 mm, lebar di tengah: 635 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 30 rpm, berat keseluruhan: 900 kg, Sehr geehrte Damen und Herren, We offer for sale a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully operational and can be inspected and tested on site at any time. Availability: Immediate Distance between centers: 635 mm Dodpfx Abou St S Ajhecc Center height over bed: 165 mm Center height over cross slide: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Required space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Kondisi: bekas, Tahun pembuatan: 1986, Swing over bed: 335 mm Swing over cross slide: 165 mm Turning length: 635 mm Total power requirement: 2.2 kW Digital readout: 3-axis digital readout Bar capacity: Ø 40 mm Spindle speed range: 30 – 2500 rpm Spindle nose: D1-4 Camlock Four-jaw chuck diameter: 200 mm Three-jaw chuck diameter: 200 mm Tailstock: MT 3 Approx. machine weight: 860 kg Approx. required space: 1700 x 1000 x 1700 mm Digital readout: Heidenhain Various accessories such as drill chuck for tailstock, tool holder, etc. The machine is in good condition. Dodpfeufud Rjx Abhocc

Kondisi: baru, Tahun pembuatan: 2025, Centre lathe swing over bed: 330 mm Swing over cross slide: 210 mm Turning length: 1000 mm Centre height: 167 mm Spindle bore: 40 mm Drive power: 2.2 kW - New machine - Dcedowp Tq Uspfx Abhsc with 3-axis ACU-RITE digital readout and MULTIFIX quick-change tool post size MA * For further information regarding the exact standard equipment and available options, please visit our website or contact us directly *

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, - Digital display. - Accessories included. Centers Center height: 170 mm Center distance: 650 mm Swing diameter Over bed: 350 mm Over cross slide: 196 mm In the gap: 535 mm Width in front of face plate: 165 mm Spindle Spindle bore: 42 mm Spindle nose: D1-4" Camlock Taper in sleeve: No. 3 MT Spindle speeds 3 speed ranges: 0 – 3,250 rpm Main motor: 7.5 kW (10 HP) Bed Slideway width: 318 mm Guideway type: V and flat Cross slide Width and length: 180 - 850 mm Travel: 250 mm Top slide Width: 90 mm Travel: 130 mm Tool holder: 20 x 20 mm Quick change toolpost: Dickson No. 2 Tailstock Quill diameter (nominal): 63 mm Travel: 145 mm Taper: No. 4 MT Offset: ±12 mm Leadscrew Diameter: 32 mm Thread: 6 mm pitch or 4 T.P.I. Threads Metric pitch: 0.2 – 14 mm (51) Inch thread T.P.I.: 2 - 56 (56) Module pitches: 0.2 – 3.5 (20) Diametral pitch (D.P.): 8 – 56 (20) Feed Metric (R10 series): 0.018 – 1.2 mm/rev Inch (R10 series): 0.0007 – 0.048 "/rev Face feed = approx. half of longitudinal values Machine height Floor to spindle center: 1,070 mm Overall length 1,250 mm between centers: 2,500 mm Overall width: 1,100 mm Overall height: 1,300 mm Coolant pump Type: AQ 3MG Headstock oil pump Type: Interlube three-phase 27662-131 Weight Dedpfx Astr Ud Sjbhscc 1,250 mm between centers: approx. 1,450 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 5.000 h, kecepatan spindel (maks.): 2.500 rpm, berat keseluruhan: 1.800 kg, en Dcedpfx Abex D Nwdehoc

Kondisi: baik (bekas), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Centre distance: 650 mm Spindle bore: 42 mm Dcsdpfjuqkf Nox Abhec Infinitely variable speed from 15 to 3250 rpm 1 x SCHUNK wedge bar power chuck Ø160 mm 1 x MULTIFIX tool holder size B with 4 inserts Machine light, chuck guard with electrical interlock, machine feet 1 x revolving centre, 1 x revolving centre with pressure gauge 1 x drill chuck with taper shank The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing is possible by appointment.

Kondisi: bekas, Tahun pembuatan: 2003, nomor mesin/kendaraan: 1527, mesin bubut poros utama dan poros penuntun bekas COLCHESTER Triumph VS 2500 Tinggi senter: 195mm Panjang benda kerja antara senter: 650mm Lubang spindle: 54mm Kecepatan variabel tanpa tingkat dari 14-2500 rpm Pinol kepala lepas MK5, perangkat pendingin, perangkat pemotong ulir cepat Display digital FAGOR NUP 300 TS-RS 1 x chuck tiga rahang RÖHM, pembatas drum 5 posisi, pembatas spindle berlubang Lampu mesin, 1 x kepala revolver PARAT 4 posisi, 4 x dudukan alat ganti PARAT Djdpsx Hrumofx Abhscc center yang ikut berputar dan chuck bor quick-change Mesin tersedia di lokasi kami di 71334 Waiblingen-Beinstein dan siap langsung digunakan. Peninjauan mesin dapat dilakukan dengan perjanjian.

Kondisi: siap digunakan (bekas), Colchester Triumph 2500 Lathe Turning diameter (over bed): 400 mm Turning diameter (over cross slide): 246 mm Distance between centers: 1270 mm Center height: 195 mm Swing diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2500 rpm Spindle speed ranges (infinitely variable): Low: 14 rpm - 300 rpm Medium: 36 rpm - 830 rpm High: 109 rpm - 2500 rpm Overall dimensions: 2600 mm x 1300 mm x 1800 mm (L x W x H) Accessories: - 5 Multifix tool holders - Steady rest - Center, live centers - Drill chuck - Jaws - Cabinet - Coolant pump You are welcome to schedule an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (subject to a valid VAT identification number). Sale subject to prior sale. Visit our shop and see our other offers as well. Dodpfoxfrgdsx Abhocc Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description may occur and are subject to change.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LVM50GIRJA/02115, SPESIFIKASI MESIN Tinggi pusat: 170 mm Putaran di atas tempat tidur: 350 mm Putaran di atas eretan silang: 196 mm Putaran pada celah: 535 mm Lebar depan pelat muka: 165 mm Panjang tempat tidur antara pusat: 1250 mm Kecepatan spindle (variabel tak terhingga): 15-3250 rpm Mounting hidung spindle (Camlock): D1-4 Lubang spindle: 42 mm Motor spindle: 7,5 kW Lebar over bedways: 318 mm Perjalanan eretan silang: 250 mm Perjalanan eretan atas: 100 mm Perjalanan laras tailstock: 145 mm Dedpfxsycg Thj Abhscc Taper dalam laras tailstock: No. 4MT Mesin dengan eksekusi Imperial MESIN DILENGKAPI DENGAN Sistem DRO 2 sumbu Newall DP700 Chuck 3 jaw Quick change toolpost dan 3 toolholder Bedstop Penerangan Pelindung chuck Sistem pendingin Splashguard belakang

Kondisi: sangat baik (bekas), Swing diameter over bed 360 mm Distance between centers 650 mm Spindle speeds 20–3250 rpm Various accessories Dcodpfxorx Rwnj Abhec MARCELS MASCHINEN CH

Kondisi: baru, Tahun pembuatan: 2025, Swing diameter over bed: 350 mm Swing diameter over cross slide: 196 mm Turning length: 650 mm Center height: 170 mm Dcodpfx Ajxxb Azobhoc Spindle bore: 42 mm Drive power: 7.5 kW - New machine - with 3-axis ACU-RITE digital readout including constant cutting speed and traversable over the entire bed length, MULTIFIX quick-change toolpost, size MB * For more information regarding the exact standard equipment and available options, please visit our website or contact us directly *

Kondisi: baik (bekas), Tinggi center: 195 mm Jarak antar center: 1250 mm Diameter kerja maksimum di atas alas/kereta support: 400/265 mm Lubang/spindle mount: Camlock D1-6"/54 mm Kerucut penerimaan senter tailstock: MK 5 Dodpjxlg Dwofx Abhjcc Kecepatan spindle dalam 3 grup, variabel tanpa langkah: 0 - 2500 rpm Feed memanjang: 0,018 - 1,2 mm Feed melintang: 1/2 dari feed memanjang 51 pitch ulir metrik: 0,2 - 14 mm 56 ulir inchi: 2 - 56 TPI 20 ulir modul: 0,2 - 3,5 modul 20 ulir diametral pitch: 8 - 56 DP Sambungan listrik: 400 V, 7,5 kW Berat: 1500 kg Dimensi ruang: 2500 x 1300 x 1300 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 400 mm, diameter pembubutan di atas carriage atas: 240 mm, tinggi pusat: 200 mm, panjang pembubutan: 1.100 mm, panjang total: 2.500 mm, lebar total: 1.100 mm, tinggi total: 1.900 mm, kecepatan spindel (maks.): 2.500 rpm, berat keseluruhan: 1.500 kg, diameter chuck tiga rahang: 240 mm, machine-001 Dodpfxsw U Tn Ns Abhscc

Kondisi: sangat baik (bekas), Swing diameter over bed 400 mm Centre distance 650 mm Spindle speeds 0-2500 rpm Dsdeq Dll Dspfx Abhscc Various accessories MARCELS MASCHINEN CH

Kondisi: baru, Tahun pembuatan: 2025, d-0001 Djdpfxjxcyxcj Abhjcc

Kondisi: baru, Tahun pembuatan: 2025, Swing diameter over bed 330 mm Swing diameter over cross slide 210 mm Turning length 635 mm Centre height 167 mm Spindle bore 40 mm Drive power 2.2 kW - New machine - with 3-axis digital readout ACU-RITE and Dodswp Tfxopfx Abhjcc MULTIFIX quick-change tool post, size MA * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Kondisi: baru, Tahun pembuatan: 2024, Swing diameter over bed: 350 mm Swing diameter over cross slide: 196 mm Turning length: 650 mm Center height: 170 mm Spindle bore: 42 mm Drive power: 7.5 kW - New machine - with 3-axis ACU-RITE digital readout including constant cutting speed and traversable over Dsdpfx Abowp Tpkehecc the entire bed length, MULTIFIX quick-change toolpost, size MB * For more information regarding the exact standard equipment and available options, please visit our website or contact us directly *

Kondisi: bekas, Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LVT50 GMRJA/04069, SPESIFIKASI MESIN Tinggi senter: 195 mm Dcjdpfjxldidjx Abhsc Diameter ayun di atas bed: 400 mm Diameter ayun di atas eretan silang: 246 mm Diameter ayun di bagian gap: 585 mm Lebar di depan pelat muka: 165 mm Panjang bed antara senter: 1250 mm Kecepatan spindle (tak terbatas): 0-2500 rpm Mounting hidung spindle (Camlock): D1-6 Diameter lubang spindle: 54 mm Motor spindle: 7,5 kW Lebar atas bedways: 318 mm Gerak eretan silang: 250 mm Gerak eretan atas: 130 mm Gerak laras tailstock: 178 mm Taper pada laras tailstock: No. 5 MT Berat kira-kira: 1800 kg Mesin dalam eksekusi metrik MESIN DILENGKAPI DENGAN Sistem Pembaca Digital 2 Axis Newall Chuck Rahang 3 Toolpost Quick Change Ainjest attachment ulir kecepatan tinggi Pelindung Chuck Pencahayaan Sistem Pendingin Pelindung percikan belakang

Kondisi: baru, Tahun pembuatan: 2026, Centre lathe swing over bed: 330 mm Swing over cross slide: 210 mm Turning length: 1000 mm Centre height: 167 mm Spindle bore: 40 mm Drive power: 2.2 kW - New machine - with 3-axis ACU-RITE digital readout and MULTIFIX quick-change tool post size MA Djdoygm Srjpfx Abhscc * For further information regarding the exact standard equipment and available options, please visit our website or contact us directly *

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, de Dcjdpfsx H Anwex Abhsc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, jarak pergerakan sumbu X: 290 mm, jarak gerak sumbu Z: 1.920 mm, daya motor spindle: 11.000 W, 9362 Dcsdeyfd Hwspfx Abhoc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: X1T126, lubang spindel: 42 mm, panjang pembubutan: 650 mm, diameter pembubutan: 350 mm, kecepatan spindel (maks.): 3.500 rpm, produsen pengendali: Fanuc, RINCIAN TEKNIS Panjang putar maks.: 650 mm Diameter putar maks.: 350 mm Lubang spindle: 42 mm Kecepatan putar spindle maks.: 3.500 rpm RINCIAN MESIN Kontrol: Fanuc Dimensi & Berat Dimensi (P x L x T): 2.400 x 1.700 x 1.500 mm Berat: 1.800 kg PERLENGKAPAN Chuck rahang 3 Banyak rahang cadangan Chuck collet Dodsyg Hvwopfx Abhecc Collet Dudukan tetap (steady rest) Piringan muka Pemegang alat Parat

Kondisi: baik (bekas), diameter putar di atas sled silang: 267 mm, diameter pembubutan: 432 mm, lebar di tengah: 1.500 mm, 3-jaw chuck, diameter 250 mm Tool post Steady rest Tailstock Coolant system Technical Data: Centre distance: 1500 mm Swing over bed: 432 mm Swing over cross slide: 267 mm Swing in gap: 710 mm Spindle bore: 76 mm Spindle speed range: 20–1600 rpm Drive power: 9.3 kW Dcedpetq Exrofx Abhjc Machine weight approx.: 2310 kg Technical data, accessories and machine description are non-binding.

Kondisi: diremajakan ulang (bekas), Maschine mit Flachbett Spitzenweite: 1.270 mm (50") Umlaufdurchmesser über Bett: 380 mm (15") Umlaufdurchmesser über Planschlitten: 230 mm (9") Dcjdov I Ddqspfx Abhoc Spindeldrehzahlen: 25 bis 2.000 U/min (16 Stufen) Spindelbohrung: 51 mm (2" Durchgang) Vollständiger Gewindeschneidsatz (Längs- und Quervorschub) Planscheibenaufnahme: D16 Reitstockkonus: MK 4 3- und 4-Backenfutter sowie Planscheibe Kühlmitteleinrichtung 2-Achsen-Digitalanzeige (DRO) Hauptmotor: 5,5 kW (7,5 PS) Maschine in gutem Zustand Gewicht ca.: 1,5 t Abmessungen ca.: 2.100 x 1.200 x 1.500 mm Schnellwechselstahlhalter mit 3 Einsätzen

Kondisi: diremajakan ulang (bekas), Gapbett-Drehmaschine Spitzenweite: 1.520 mm Umlaufdurchmesser über Bett: 560 mm Spindeldrehzahlen: 18 - 1400 U/min Spindelbohrung: 90 mm (3,5") Spannfutteraufnahme: D1-11 Reitstockkegel: Morsekonus Nr. 5 Schnellwechselstahlhalter mit 4 Haltern & Schlüsseln Neues 3-Backenfutter Kühlmitteleinrichtung Neues 2-Achsen-Digitalanzeigesystem (DRO) Dcjdeq N Ay Aepfx Abhoc Spannfutter-Schutzvorrichtung: wird noch bestätigt 6 Monate Gewährleistung