Beli Cold Storage bekas (9.131)

Kondisi: siap digunakan (bekas), fr-001 Gbedpfsurm Upex Alksl

Kondisi: bekas, Tahun pembuatan: 1994, Overview These two isobaric pressure tanks (each 15,000 L) were manufactured in 1994 by TMCI Padovan, originate from the wine industry, and were previously used for sparkling wine production. Equipped with full cooling jackets and a pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are made of carbon steel with a food-grade epoxy coating on the interior, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-effective alternative to stainless steel vessels, particularly for operations with lower capital requirements. Each tank is fully insulated and features a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, regular renewal of the interior lining is necessary depending on use and product conditions. TECHNICAL DATA Manufacturer: TMCI Padovan Year of manufacture: 1994 Quantity: 2 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 15,000 L per tank Material: Shell: Carbon steel Interior coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure rating: 6 bar Dimensions (per tank): Outer diameter: approx. 2,400 mm Cylinder height: approx. 4,000 mm Gbodpfxjy Hknxo Alksl

Kondisi: bekas, Tahun pembuatan: 1992, Overview These 4 isobaric pressure tanks (each 20,000 liters) were manufactured by TMCI Padovan in 1992, originate from the wine industry, and were previously used for sparkling wine production. Featuring full-surface cooling jackets and a nominal pressure of up to 6 bar, these vessels are suitable for the fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel and feature an internal food-grade epoxy coating—a technology that was common before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, especially for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, allowing for temperature-controlled processes. Please note that due to the coating system, periodic inspections and reapplication of the epoxy lining are required depending on use and product type. Technical Data - Manufacturer: TMCI Padovan - Year of manufacture: 1992 - Quantity: 4 units - Type: Isobaric pressure vessel with full-area cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages Gbodpfey Hkl Dex Alkel - Capacity: 20,000 L (200 hl) per tank - Materials: - Shell: Carbon steel - Internal coating: Food-grade epoxy resin - Insulation: approx. 100 mm polyurethane, stainless steel cladding - Pressure rating: 6 bar - Dimensions (per tank): - External diameter: approx. 2,200 mm - Cylinder height: approx. 7,000 mm - Total height: approx. 9,000 mm

Kondisi: bekas, Tahun pembuatan: 1985, Overview These 5 insulated pressure tanks (each with a capacity of 100 hl), manufactured by TMCI Padovan in 1985, originate from the wine industry and were previously used for sparkling wine production. Thanks to their pressure resistance and fully jacketed cooling construction, they are suitable for fermentation, maturation, and storage of carbonated products. The vessels are made of carbon steel with a food-grade epoxy internal coating – a technology widely used in the sector before stainless steel became the standard. While they are now less common than stainless steel tanks, these tanks offer a cost-effective alternative, especially for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling temperature-controlled processing. It should be noted that the epoxy coating must be regularly renewed, depending on usage and product type. Technical Data Manufacturer: TMCI Padovan Year of manufacture: 1985 Quantity: 5 units Gbodpsy Hkkyofx Alkol Type: Pressure vessel with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 100 hl per tank Material: - Shell: Carbon steel - Inner coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure rating: 6 bar Dimensions (per tank): - Outer diameter: approx. 2,200 mm - Cylindrical height: approx. 4,000 mm

Kondisi: bekas, Tahun pembuatan: 2005, Overview Gjdpfxjy Hkkaj Alkobl These 8 isobaric pressure tanks (each with a capacity of 500 hl), manufactured in 2005 by Sirio Aliberti, originate from the wine industry and were previously used for sparkling wine production. With an operating pressure of up to 6 bar and full insulation, these tanks are ideally suited for the fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with a food-grade epoxy coating on the interior, combined with polyurethane insulation and an external stainless steel cladding. This design offers a traditional and cost-effective alternative to stainless steel tanks, which became the industry standard in later years. Thanks to their large volume and isobaric properties, these tanks are particularly well-suited for high-throughput production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA Manufacturer: Sirio Aliberti Year of manufacture: 2005 Quantity: 8 units Type: Isobaric pressure vessel Application: Fermentation, maturation, storage of carbonated beverages Capacity: 500 hl per tank Material: - Base: Carbon steel - Internal coating: Food-grade epoxy resin - Insulation: Polyurethane - Outer cladding: Stainless steel sheet Operating pressure: 6 bar Dimensions (per tank): - Internal diameter: approx. 3,200 mm - External diameter: approx. 3,450 mm - Cylinder height: approx. 5,250 mm - Foot height: approx. 1,200 mm - Overall height: approx. 7,800 mm

Kondisi: baik (bekas), Tahun pembuatan: 2004, Hänel Rotomat 400 Paternoster The Hänel Rotomat 400 is a vertical carousel system (paternoster) that operates on the 'goods-to-user' principle and is suitable for both industrial storage and as an office lift for archiving purposes. This system optimally utilizes the available room height to maximize storage capacity on a minimal footprint. Fields of Application Gbjdpey Nxp Asfx Alkjl The Hänel Rotomat 400 is used across a range of industries: Industry: For storing tools, measuring devices, electronic components, and small parts. Office & Administration: As an automated archive system for suspension files or document folders. Medical sector: For sterile storage of surgical instruments. Overall dimensions (L): 260 cm Overall dimensions (W): 130 cm Overall dimensions (H): 285 cm Admissible shelf load: 150 kg Electrical requirements: 3~ N+PE 400V / 50Hz/ 5.5 kW Year of manufacture: 2004 Dismantling and transport to be carried out by the buyer. Dismantling service: Professional dismantling by our specialized assembly team can be provided upon request (EUR 5,000 net). Item location: Czech Republic Upgrade your Paternoster A vertical carousel is only as efficient as its internal layout. Our custom-fit storage bins utilize the tray surface down to the last millimeter. Find the right sizes for your system in our other auctions. "One-stop solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de You can find more vertical lifts – new and used – in our shop! International shipping rates available on request!

Kondisi: sangat baik (bekas), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/350-A. This device is designed for conducting thermal shock tests and is typically used in industrial, research, and quality assurance applications. Fields of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Gbodpfey Hkgbex Alksl Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerants: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control unit with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital target/actual value display - 2-zone system (hot and cold chambers) - Automatic carriage for shock tests Technical design: - Separate hot and cold chambers - Carriage system for rapid temperature change - Test chamber made of stainless steel - Removable shelf / grid rack - Viewing window in the door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Unit installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following steps are carried out in advance on the chambers we offer: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Specifications and data subject to change and errors!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance. Application areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and cyclical temperature testing Technical data: - Type: TSS-70/130 - Test volume: 130 liters - Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C - Heating rate: approx. 6 K/min from ambient to +180°C - Cooling rate: approx. 4 K/min from ambient to -60°C - Temperature deviation: ±1 K over time ±2 K spatially - Rate of temperature change: max. 100 K/min on average for thermal shock testing without radiant heat - Transfer time between chambers: ≤ 15 min in the range from -65°C to +200°C with 10 kg ICs - Switching time: < 10 seconds Electrical data: - Connection: 400 V, 3/N, 50 Hz - Rated power: approx. 16.7 kW - Rated current: approx. 26.8 A - Site-side fuse: 32 A (slow blow) - Connector: Cekon 32 Refrigeration system: - Refrigerants: R404A / R23 - Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control panel - Microprocessor controlled regulation and monitoring system - Programmable operation - Up to 100 test programs possible - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external test specimen control - Failure warning via potential-free contact - Load up to 30 V-DC, 2 A - EMC tested Technical design: - Hot and cold chambers - Trolley with spindle drive - Test compartment / trolley made of stainless steel, material no. 1.4301 - Removable basket made of stainless steel wire - Pipe sleeve NW 50 with closure plug - Compressed air connection 1/4" male thread - Condensate drain (non-pressurized) R 1/2" internal thread Gbedpfx Aoy Hkfdjlkjl - Safety door lock - Lockable door with window Dimensions as per installation drawing: - External dimensions approx.: 2335 x 940 x 1820 mm - Delivery opening approx.: 1990 x 940 x 1652 mm - Test space dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm - Window: 300 x 300 mm Additional data: - Protection class: IP 22 - Noise level: < 60 dB(A) - Weight: approx. 950 kg - Average consumption per test cycle: approx. 8 kWh For your safety as a buyer, please note: The following points are carried out in advance for all chambers we offer: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerants if required 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change or errors!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a premium thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Applications: - Material testing - Aging tests - Electronic and component testing - Thermal shock and temperature cycling tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature constancy: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock tests Without radiant heat Transfer rate: ≤ 15 min in range from -65°C to +200°C with 10 kg ICs Transfer time: Gjdpfx Ajy Hkd Helksbl < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Site-side protection: 32 A slow-blow Connection: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for customer test item activation - Fault indication via potential-free contact (Load up to 30 VDC, 2 A) - EMC tested Technical design: - Hot and cold chamber - Drawer carriage with spindle drive - Test space / basket made of stainless steel, material no. 1.4301 - Insert basket made of stainless steel wire - Tube feedthrough NW 50 with sealing plug - Compressed air connection 1/4" external thread - Gravity condensate drain, R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation sketch: External dimensions approx.: 2335 x 940 x 1820 mm Installation dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm; Width approx. 480 mm; Depth approx. 660 mm Window: 300 x 300 mm Further data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption per test cycle: approx. 8 kWh For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data reserved!) Further questions? We are happy to answer them by phone.

Kondisi: baik (bekas), Tahun pembuatan: 2010, Rak penyimpanan batang panjang KASTO UniTower C 1,5, No. 5079 001 006, tahun pembuatan 2010, 20 kaset (tipe 1 + 2), ukuran kaset 6.500 x 840 mm, kapasitas beban per kaset 1.000 atau 1.500 kg, termasuk alat pengambil. Gbsdpfxjy N Tuyj Alkjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, nomor mesin/kendaraan: 381-30-09/21, Lini khusus untuk pemotongan profil ALU. Lini 3-sumbu untuk pemotongan 90° profil alu pendek. Dimensi profil: 30 x 15 mm. Panjang potongan: 14 mm. Gjdsy Nxh Sepfx Alkebl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500003520, en Gbedpoyvrh Eefx Alkol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 500003519, en Gbjdeyvrbfopfx Alksl

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, kapasitas baterai: 465 Ah, kapasitas baterai yang tersisa: 76 persen, tegangan baterai: 80 V, panjang total: 1.025 mm, lebar total: 565 mm, tinggi total: 785 mm, berat keseluruhan: 1.238 kg, jenis bahan bakar: listrik, jenis arus keluaran: Arus searah (DC), produsen baterai: Hawker, Baterai forklift 80V 3PzS465 UJI 76% TERUJI Tahun pembuatan: 2020 Dimensi (p x l x t): 1025mm x 565mm x 785mm Berat 1238kg Baterai telah dirawat dan diuji oleh perusahaan profesional. Godpfsy N Dvnex Alksbl Uji kapasitas (uji pelepasan C5) 358/465 Ah Kapasitas tersisa: 76% Dilengkapi sistem pengisian air Aquamatik (BFS) Dengan baut terminal, namun TANPA pelepasan akhir Cocok, misalnya, untuk: Crown TSP 1500 Crown TSP 7000 STILL R60-20 Compact Linde K233-011 Silakan periksa ukuran!

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, kapasitas baterai: 775 Ah, kapasitas baterai yang tersisa: 82 persen, tegangan baterai: 48 V, panjang total: 835 mm, lebar total: 630 mm, tinggi total: 785 mm, berat keseluruhan: 1.118 kg, jenis bahan bakar: listrik, Baterai forklift 48V 5PzS775, baterai 82% TERUJI Tahun pembuatan: 2022 Dimensi (p x l x t): 835mm x 630mm x 785mm Berat: 1118kg Baterai telah dirawat dan diuji oleh perusahaan spesialis. Tes kapasitas (uji pengosongan C5): 635/775 Ah baterai Kapasitas tersisa: 82% Dengan sistem pengisian Aquamatik (BFS) Gjdpfsy N Dttjx Alkobl Dengan baut terminal tetapi TANPA pembuangan akhir

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, kapasitas baterai: 775 Ah, kapasitas baterai yang tersisa: 83 persen, tegangan baterai: 48 V, panjang total: 1.035 mm, lebar total: 530 mm, tinggi total: 785 mm, berat keseluruhan: 1.118 kg, jenis bahan bakar: listrik, Baterai forklift 48V 5PzS775, baterai 83% TERUJI Dimensi (p x l x t): 1035mm x 530mm x 785mm Berat: 1118kg Baterai telah dirawat dan diuji oleh perusahaan spesialis. Tes kapasitas (Tes pengosongan C5): 649/775 Ah baterai Kapasitas sisa: 83% Dilengkapi sistem pengisian Aquamatik (BFS) Gedpfx Ajy N Drcjlkjbl Dengan baut kutub namun TANPA terminal akhir

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, produsen baterai: Stuba, model baterai: 4PzS620, kapasitas baterai: 620 Ah, kapasitas baterai yang tersisa: 71 persen, tegangan baterai: 80 V, berat baterai: 1.558 kg, tinggi total: 785 mm, panjang total: 1.028 mm, lebar total: 708 mm, Baterai Forklift 80V 4PzS620 71% TERUJI Tahun pembuatan: 2019 Dimensi (p x l x t): 1028mm x 708mm x 785mm Berat: 1558kg Baterai telah dirawat dan diuji oleh perusahaan spesialis. Gbjdjy N Dpnopfx Alkel Tes kapasitas (uji pelepasan C5): 444/620 Ah Sisa kapasitas: 71% Dengan sistem pengisian Aquamatik (BFS) Dengan baut terminal tetapi TANPA kabel akhir

Kondisi: sangat baik (bekas), de2hu_001 Gbodpfx Aey Hiymolksl

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, produsen baterai: AIM, model baterai: 24v 8PzS1000, kapasitas baterai: 1.000 Ah, kapasitas baterai yang tersisa: 76 persen, tegangan baterai: 24 V, berat baterai: 755 kg, tinggi total: 630 mm, panjang total: 830 mm, lebar total: 485 mm, warna: abu-abu, Baterai forklift 24V 8PzS1000 76% TERUJI Tanggal pengujian: 2025 Godpoy N Dh Dsfx Alkjbl Berat: 755kg Dimensi: 830mm x 485mm x 630mm Setara dengan 24V 8PzS920 Baterai dirawat dan diuji oleh perusahaan ahli. Pengujian kapasitas (pengujian pengosongan C5): 768/1000 Ah baterai Kapasitas tersisa: 76% Dengan sistem pengisian Aquamatik (BFS) Dengan baut kutub namun TANPA terminal akhir

Kondisi: bekas, Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, doppeldruckpresse_01 Gbsdpfxjy N N Iij Alkel

Kondisi: bekas, Fungsionalitas: belum diuji, Kabinet penyimpanan/flush gas cleanroom Hammerlit bekas (lemari penyimpanan dengan sistem pembilasan nitrogen/XCDA). Pabrikan: Hammerlit Tegangan: 220-240 V Dimensi: 78 x 111 x 233 cm (kedalaman x lebar x tinggi) Beberapa unit tersedia. Gedpfsyka Unex Alkobl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, nomor mesin/kendaraan: 376-30-07/21, Lini khusus untuk pemotongan profil aluminium. Lini pemotongan 6-sumbu untuk profil aluminium panjang. Ukuran profil: 160x200 mm. Panjang potongan: 1500 mm. Gbedpfxoy Nkp Is Alkel

Kondisi: bekas, Tahun pembuatan: 1979, de-to-hu-it-lt-lv-nb-nl-pl Gbjdpfxey N D Nne Alkol

Kondisi: baru, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €4,200 Saw blade diameter: 315 mm Saw blade dimensions: 315x32x63 mm Saw blade speed: 45 / 90 rpm Mitre left: 45° Mitre right: 45° Cutting capacity at 0° (round): 105 mm / (square): Cutting capacity at 45° right (round): 90 mm / (square): Cutting capacity at 45° left (round): 90 mm / (square): Motor: 1.3 / 1.8 kW Width: 600 mm Depth: 1000 mm Height: 1400 mm Weight: 200 kg Gsdpfx Aowmzfzslkebl Manual vice Sturdy double joint Low-voltage start/stop switch integrated in the handle Mitre cuts 45 degrees left and 45 degrees right Divided vice (clamps in front of and behind the saw blade) Saw blade not included

Kondisi: baru, 001 Gbedpeynngaefx Alkel