Beli Cross Meja bekas (11.172)

Kondisi: baru, Cross table with rotary plate Table length: 600 mm Table width: 240 mm X travel: 370 mm Y travel: 130 mm Table height: 165 mm Weight: 60 kg Ledpfxefgvzuj Aglorg Dimensions (L x W x H): 0.8 x 0.45 x 0.2 m

Tahun pembuatan: 2013, Kondisi: bekas, Technical specifications for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of opened bales: 674 pcs Operating time: only 3 days, exclusively for commissioning the entire system upon initial installation Opening cycle: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum bale weight: 2,000 kg Conveyor height: 1,400 mm Maximum conveyor width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of delivery: - Infeed conveyor 3,500 x 1,200 x 1,400 mm - Feed conveyor to opener 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for the short operating period: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The background for the installation was to ensure that in case of a malfunction or during maintenance of the incineration plant, municipal waste could still be received, compacted, wrapped, and stored, until normal operations resumed. Afterwards, all bales could be opened and the waste fed into the standard incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and has never been used in regular operation since. Only during the commissioning and initial trial runs in 2015 were 674 bales opened over a period of three days. The system is in excellent, immediately operational condition. Due to reconstruction work at the incineration plant, the installation site of the bale opener was required for other purposes. Therefore, the complete line is now available for sale. Brief description of the bale opening process: Pressed bales are placed onto the feed conveyor from the side or from behind using a forklift truck. For opening, the bales must be positioned so that the wire or twine strapping runs horizontally to the conveyor; otherwise, the bales must be rotated by 90°. The infeed conveyor advances one bale at a time to the cutting unit. The gripper holds the wires or twine strapping firmly. The rotating knife cuts the bale longitudinally. Afterwards, the gripper returns to its home position. The opened bale is then conveyed to the discharge chute and falls onto the downstream conveyor technology. Lredou Tg I Dopfx Aglsg Remarks: Original purchase price of the entire system: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. The system has been dismantled into shipping units, placed in storage, and is available at short notice for inspection and loading. We accept no liability for the technical data provided or for any potential errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Panel saw with side carriage, in good working condition Lrodpfjfv Hphjx Agljg

Kondisi: hampir baru (bekas), Range (depending on lighting conditions) up to: 15 m Lrjdjd Ecncepfx Agleg Range with laser receiver: 30 m or more Levelling accuracy at 5 m: +/- 1 mm Self-levelling range: 4° ± 0.5° Horizontal line accuracy at 5 m: ± 1.5 mm Vertical line accuracy at 3 m: ± 0.75 mm Number of laser lines: 2 Weight: 485 g

Kondisi: bekas, Förderband mit Kettenquerverschub Kann nach dem Nachschnitt eingesetzt werden. - Elektromotor: 1,1 kW - Elektromotor: 0,75 kW Lsdpfx Asi Sdk Sjglerg - Elektromotor: 1,1 kW

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 4.602 h, 2006 | Holland-Lift Q135-DL24 Monostar (13.5 m) | Used Scissor Lift Table | 4,602 hours 📍Location: Lithuania Lrodpfx Aeyc Ihaogljg 🚛 Delivery available to your location – Use our shipping calculator to estimate transport costs! 💰 Buy now for EUR 10,000 or make an offer. Payment upon delivery is available for a reasonable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points: 35 approved ✅ 4 minor issues ℹ️ 1 deficiency ⚠️ 📌 Inspector’s Comment: Given the age of the machine, everything is working as it should. 📄 Want to see the full inspection, additional photos, or a video? Tip: The reference "38109 Equippo" is commonly used when searching for more details online. 💡 Why choose this machine and our service: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We provide helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 128 h, 2006 | Holland-Lift N165-12EL 18.50 m | Used Scissor Lift Table | 128 operating hours 📍Location: Lithuania 🚛 Delivery available to your location – Use our shipping calculator for transport cost estimates! 💰 Buy Now for EUR 9,800 or Make an Offer. Payment upon delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points: 28 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector’s Comment: Considering the age of the machine, all components and functions operate as expected. No major issues or anomalies were found during inspection. 📄 Want the full inspection report, extra photos, or a video? Tip: The reference "38101 Equippo" is commonly used to search for more information online. 💡 Why this machine and our service stand out: ✔ Comprehensive inspection by professionals ✔ Delivery direct to your jobsite ✔ Money-back guarantee ✔ Secure and flexible payment options Lredpfx Agsyb Ui Uoleg 🔄 Looking for other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: sangat baik (bekas), Four-sided planer infeed table TECHNICAL SPECIFICATIONS: - Maximum workpiece length: 5000 mm Ledpfx Agehtq Amelorg - Minimum workpiece length: 400 mm - Maximum workpiece width: 330 mm - Maximum workpiece thickness: 120 mm - Feed roller motor power: 1.1 kW - Chain drive motor power: 1.5 kW - Feed speed adjustable via inverter - 7 guiding chains - 13 steel feed rollers - Roller diameter: 90 mm - Roller height from base: 820 mm - Pneumatic pressure system - Overall dimensions (L/W/H): 600 / 240 / 155 cm - Weight: ~1500 kg

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang spindle milling: 130 mm, jenis penyesuaian ketinggian: mekanis, panjang meja: 2.070 mm, jenis arus masuk: tiga fasa, diameter spindel: 30 mm, kecepatan spindel (maks.): 10.000 rpm, diameter sambungan ekstraksi: 100 mm, tegangan masuk: 400 V, kecepatan rotasi (min.): 3.500 rpm, kecepatan rotasi (maks.): 10.000 rpm, panjang kerja spindel: 130 mm, Perlengkapan: rem mesin, pl-hu-001 Lodpfx Ageycqiyelorg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Gergaji potong multi arah untuk produksi balok dan setengah jadi bubut Lrjdpfxjych N Dj Aglog

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 5.321 h, 2006 | Holland-Lift B195-DL25 (21m) | Used Scissor Lift Table | 5321 hours 📍Location: Lithuania 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy now for EUR 13,200 or make an offer. Payment on delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 40 approved ✅ 0 incomplete ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Lrodpfxoyaug Rs Aglsg All functions are working, machine leveling takes some time, no problems during inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38099 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Clamping force: 25 tonnes Version: Exchangeable table Opening force/stroke min.-max.: 100/225 mm Mould height variable min.-max.: 122-222 mm Stroke of exchangeable table: 500 mm Weight on exchangeable table: max. 120 kg Ejector force/stroke: max. 16/40 kN/mm Screw diameter: 22 mm Effective screw length L/D: 20 Screw stroke: max. 90 mm Shot volume: 34 cm³ Shot weight: 31 g Injection pressure: 2,000 bar Ledju Epy Njpfx Aglorg Operating hours: 12,500 h

Kondisi: baru, Tahun pembuatan: 2024, Hardcover-Buchdeckenfertigungstisch - Kaschiermaschine - Das Gerät ist brandneu und verfügt über 12 Monate Garantie. Europäische Produktion, basierend auf Markenkomponenten. Arbeitsablauf: Der Bediener legt das Überzugsmaterial manuell in das Leimauftragssystem, bei dem der Heißleim automatisch aufgetragen wird (Betriebstemperatur 60-70°C). Lrodpfx Agoya Iuhsleg Ein mit Leim versehenes Stück Überzugsmaterial legt der Bediener manuell auf den Saugtisch und platziert anschließend manuell die Graupappenzuschnitte und den Buchrücken. Der vorbereitete Umschlag wird manuell in das Gerät eingelegt, das die Ober- und Unterkanten des Überzugsmaterials mit Hilfe eines patentierten Bürstensystems umschlägt und verklebt. Während des Kantenumschlags wird der Umschlag durch Führungswalzen gepresst. Die fertigen Buchdecken sind direkt für die Weiterverarbeitung einsatzbereit. Die Maschine ist ausgestattet mit: – Leimauftragsmodul für den Oberbogen – Saugtisch – Führungen zum Fixieren des Überzugsmaterials und der Graupappe – Umschlageinheit – Auslagetisch Technische Daten: Max. Format: 840 x 500 mm Min. Format: 100 x 100 mm Leistung: 100-150 Decken/h Stärke des Überzugsmaterials: 80-200 g/m² Graupappestärke: 1-4 mm Überlappung Überzugsmaterial: 13-20 mm Klebstofftemperatur: 30-100 °C Leimvorrat: 2-3 kg Stufenlose Regulierung der Drehgeschwindigkeit von Walzen und Bürsten Verarbeitbare Materialien: Gewebe, beschichtetes Papier, Fotopapier, Kunstleder, PVC, Polyurethan Abmessungen der Maschine: 1500 x 1000 x 1000 mm Stromversorgung: 380 V Leistungsaufnahme: 3,7 kW Maschinengewicht: 500 kg

Kondisi: bekas, Tahun pembuatan: 2022, Meja geser: 3200 mm, lebar potong: 1000 mm, pagar paralel CNC, unit skor, penghenti sudut dengan indikator digital, kemiringan dan pengaturan ketinggian secara elektromotorik, panel kontrol setinggi mata. Lokasi penyimpanan: Nattheim. Lrjdpfx Agsxqtvqjljg

Kondisi: bekas, nomor mesin/kendaraan: 007087, Working area X-axis: 4300 mm Working area Y-axis: 2200 mm Working table: nesting table Main spindle power: 12 kW Lredpfx Agoq U D D Holsg Number of controlled axes: 4 axes Number of drilling spindles: 40 Number of tool positions: 30

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel INSERT 330H/90 Control system: CC100 Condition: fully functional Vertical machine with horizontal injection Rotary table diameter: 1100 mm Clamping force: 90 tons Max. opening: 570 mm Min. opening: 270 mm Platen size: 590 x 340 mm Screw diameter: 40 mm Screw length: 160 mm Injection volume: 201 cm³ Injection pressure: 1230 bar Motor: 15 kW Weight: 5600 kg Lredpfju Dbkdox Agljg Height: 2800 mm

Kondisi: bekas, Tahun pembuatan: 2007, 2007 | Holland-Lift Q 135 El 24 (15m) | Used Scissor Lift Table 📍 Location: Estonia Ledpfjyailbex Aglerg 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8,900 or Make an Offer. Payment on delivery available for a modest fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points: 26 approved ✅ 6 imperfect ℹ️ 0 critical issues ⚠️ 📌 Inspector’s Comment: The hour meter is defective, and the guard plate near the drive motor is bent. The drive motor is in good condition and all functions work, except for the leveling sensor, which occasionally fails. The customer thawed the remote control before the inspection and charged the batteries. 📄 Want to see the full inspection, additional photos, or a video? Tip: The reference "38110 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stand out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 1.197 h, 2014 | Holland-Lift N195-12EL 21.40 m | Used Scissor Lift Table | 1,197 operating hours 📍Location: Estonia 🚛 Delivery available to your location – Use our shipping calculator to estimate transport costs! Lrodjyaikwjpfx Agljg 💰 Buy now for EUR 22,500 or submit an offer. Payment upon delivery available for a low fee (subject to approval)* 👷‍♂️ Examined by an independent expert 31 inspection points: 31 approved ✅ 0 incomplete ℹ️ 0 issues ⚠️ 📌 Inspector’s comment: Considering the age of the machine, all components and functions are working as expected, and no major issues or anomalies were found during inspection. 📄 Want to view the full inspection, additional photos, or a video? Tip: The reference "38107 Equippo" is commonly used for searching for further details online. 💡 Why choose this machine and our service? ✔ Comprehensive inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking at other equipment? We offer useful tools and resources for all equipment owners and operators – conveniently accessible on our platform.

Kondisi: sangat baik (bekas), 7837 Lrjdpfx Agsx Arhcjljg

Kondisi: siap digunakan (bekas), T-Nut-Tisch, T-Nut-Arbeitstisch, T-Nut-Spanntisch 3000 x 1750 mm, Gebrauchtmaschine Lrodpfov R Dqvox Agleg Gesamtabmessungen: 3000 x 1750 x 350 mm Nutgröße: 65x27 mm Gewicht: 3500 kg

Kondisi: bekas, nomor mesin/kendaraan: 008173, Bidang kerja sumbu X: 4430 mm Lodjx A Tdfjpfx Aglorg Bidang kerja sumbu Y: 1540 mm Meja kerja: Dengan dudukan vakum konsol Daya spindle utama: 10 kW Jumlah sumbu yang dikontrol: 4 sumbu Jumlah spindle bor: 29 Jumlah tempat alat: 7

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Arburg 1200 T 2000-800 Clamping force: 200 tons Maximum opening force kN/mm: 115/500 Screw diameter: 45 mm Shot volume: 318 cm³ Shot weight: 291 g Injection pressure: 2,470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticising unit: Thermoplastic cylinder 45 mm, high wear resistance 4. Screw: Reinforced screw coupling for wedge-shaped coupling geometry Lrjdpfxswugcze Agleg 5. Control system: SELOGICA 'direct' control 6. Technology level: Stage 2, servo-driven with 2 variable-displacement pumps 7. Rotary table: Advanced ergonomics special version, 2-stage, 180° alternating forward/reverse 8. Nozzles: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric &

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1987, Fungsionalitas: fungsi terbatas, en Lrodpfxeycq Ayj Aglsg

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 2.000 kg, 3-axis turning and tilting positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters These units have proven themselves in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. Ideal for welding, assembly, machining, etc. With their stable and robust design, flexible 3-axis positioning capability (including overhead), and user-friendly operation, these positioners facilitate welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal positioning of the workpiece improves weld quality and enables higher deposition rates - Enhanced safety by greatly reducing hazardous crane handling Ledpfx Ajxbhp Hogljrg - Positioning along up to three axes simultaneously without labor-intensive repositioning - Simple operation and ergonomic handling protect and support the operator - Flexibility through modular adaptability and customer-specific custom designs possible Basic principle: Thanks to the arrangement of the carrying arm rotary axis above the clamping plate, the arm acts as a counterweight to the workpiece. This makes these machines significantly more powerful than traditional rotary-tilt tables or rotary-tilt positioners. This principle allows handling of the specified loads in any position. The two axes can rotate endlessly and, combined with the additional lifting movement, all workpiece positions (including overhead) can be achieved. - Steplessly adjustable turntable speed: 0.05 to 0.6 rpm - 2000 kg load capacity - Radio remote control - Rotation range: 360° endless - Tilt range: 360° endless - Lift: 1000–1500 mm - Arm outreach radius: 1.2 meters

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008,