Beli Cross-Léger bekas (8.433)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Panel saw with side carriage, in good working condition Lrsdpfx Abofv Hpho Neu

Tahun pembuatan: 2013, Kondisi: bekas, Technical specifications for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of opened bales: 674 pcs Operating time: only 3 days, exclusively for commissioning the entire system upon initial installation Opening cycle: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum bale weight: 2,000 kg Conveyor height: 1,400 mm Maximum conveyor width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of delivery: - Infeed conveyor 3,500 x 1,200 x 1,400 mm - Feed conveyor to opener 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Lrsdpeu Tg I Defx Ab Nsu Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for the short operating period: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The background for the installation was to ensure that in case of a malfunction or during maintenance of the incineration plant, municipal waste could still be received, compacted, wrapped, and stored, until normal operations resumed. Afterwards, all bales could be opened and the waste fed into the standard incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and has never been used in regular operation since. Only during the commissioning and initial trial runs in 2015 were 674 bales opened over a period of three days. The system is in excellent, immediately operational condition. Due to reconstruction work at the incineration plant, the installation site of the bale opener was required for other purposes. Therefore, the complete line is now available for sale. Brief description of the bale opening process: Pressed bales are placed onto the feed conveyor from the side or from behind using a forklift truck. For opening, the bales must be positioned so that the wire or twine strapping runs horizontally to the conveyor; otherwise, the bales must be rotated by 90°. The infeed conveyor advances one bale at a time to the cutting unit. The gripper holds the wires or twine strapping firmly. The rotating knife cuts the bale longitudinally. Afterwards, the gripper returns to its home position. The opened bale is then conveyed to the discharge chute and falls onto the downstream conveyor technology. Remarks: Original purchase price of the entire system: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. The system has been dismantled into shipping units, placed in storage, and is available at short notice for inspection and loading. We accept no liability for the technical data provided or for any potential errors.

Kondisi: hampir baru (bekas), Range (depending on lighting conditions) up to: 15 m Ledpfxjd Ecncj Ab Nsru Range with laser receiver: 30 m or more Levelling accuracy at 5 m: +/- 1 mm Self-levelling range: 4° ± 0.5° Horizontal line accuracy at 5 m: ± 1.5 mm Vertical line accuracy at 3 m: ± 0.75 mm Number of laser lines: 2 Weight: 485 g

Kondisi: bekas, Förderband mit Kettenquerverschub Kann nach dem Nachschnitt eingesetzt werden. Ledpfx Abji Sdk Sj Neru - Elektromotor: 1,1 kW - Elektromotor: 0,75 kW - Elektromotor: 1,1 kW

Kondisi: bekas, Tahun pembuatan: 1996, Stop yes yes/no Machine dimensions: 1000 x 1000 x 1300 mm Weight: 800 kg Technical data: - Year of manufacture: 1996 - Serial No.: 57/9961 - Function tested - Includes milling tools 1. Milling unit for upper 90° mortising 2. Milling unit for lower 90° mortising 3. Milling unit for rear notching 4. Milling unit for processing the counterpart without repositioning - Length stop with electronic measuring system up to approx. 2500 mm - Tool diameter: 2 x 130 mm / 2 x 160 mm - Motors: 3 x 1.1 kW - Voltage: 400 V, 50 Hz - Workpiece max. 56 x 80 mm – min. 8 x 6 mm - Extraction nozzle D = 150 mm - Machine dimensions: L=1000 mm, W=1000 mm, H=1300 mm - Length stop dimensions: L=3000 mm, W=1000 mm, H=2000 mm - Total weight approx. 800 kg The crossbar milling machine KSF-2/4 is successfully used worldwide. Our customers appreciate the precision, robustness, and versatility of this proven machine. The mortising for the crossbars is performed in a single operation by an upper and a lower milling unit, while the notching is accomplished by a third milling unit. After positioning the workpiece, it is automatically clamped at the push of a button, the crossbar is milled, and the workpiece is released. Lredpfx Aboxq Hiqs Neu With an additional front grooving unit (the fourth unit), it is possible to manufacture completely tear-free crossbars on the visible side of already pre-profiled bars. This ensures the high fitting accuracy of all crossbars produced with our KSF-2/4 crossbar milling machine.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Wema Probst QF50 cross machining machine Cross milling machine for processing round timber, equipped with a swiveling table to set the milling angle. 2x processing stations 1x cross milling unit Ledpfowc Tdnjx Ab Noru 1x drilling unit

Kondisi: bekas, Gergaji kap otomatis optimalisasi (gergaji geser) Dimter tipe OptiCut S 75-4 untuk memotong kayu atau plastik berdasarkan cacat (kapur fluoresen) dan panjang, termasuk konveyor melintang untuk pengumpanan. Lsdpfx Abexq D Uks Njru

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 260105, diameter mata gergaji: 800 mm, berat keseluruhan: 2.960 kg, panjang meja: 700 mm, Perlengkapan: Penandaan CE, DETAIL TEKNIS Diameter pisau minimum: 790 mm Diameter pisau maksimum: 800 mm Diameter pisau poros: 40 mm Panjang meja masuk: 700 mm Panjang meja keluar: 700 mm DETAIL MESIN Daya motor utama: 15,0 kW Dimensi & Berat Dimensi (P x L x T): 3.600 x 2.550 x 2.100 mm Berat: 2.960 kg PERLENGKAPAN Lodpfx Abexq Au Aj Njru Penandaan CE

Kondisi: bekas, kapasitas tangki: 1.850 l, GENERAL Equipment: crane lugs Design: upright Rotational speed: 300 rpm Internal diameter: 1,178 mm Total height: 3,350 mm Heating/cooling: available Insulation: available Power: 1.5 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Shaft seal: mechanical seal with thermosiphon vessel Agitator: cross-blade agitator Support type: feet Location: Bremen Technical documents: drawing, TÜV-certificates Lodpfxsxqahge Ab Neru Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,850 litres Double jacket volume: 100.0 litres Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 1,500 mm TANK Max. operating temperature tank / °C: 100 °C Tank heads: dished end Number of support legs: 3 pcs HEATING/COOLING JACKET Bottom tempering: double jacket INSULATION Insulating jacket: hermetically welded EQUIPMENT Manhole / dome: in top head (DN 400) Outlet: clamp Outlet (alternative): 40 mm Note: pressure marks on the insulating jacket AGITATOR Agitator manufacturer: Stelzer Voltage: 230/400 Volt Agitator arrangement: eccentric in top head

Kondisi: baik (bekas), Coating Thickness Gauge, Layer Thickness Gauge -Manufacturer: Elcometer, cross hatch cutter with case -Type: Elcometer 107 -Material: Stainless steel / aluminium Lrodpfsr H Nlhjx Ab Nou -Accessories: see photos -Dimensions: 300/270/H75 mm -Weight: 1.1 kg

Kondisi: belum diuji (bekas), For quick and precise cross-cutting of multiple timber pieces simultaneously, which can be placed side by side and/or stacked, with a maximum carriage travel of approximately 3.3 m. Table total length: approx. 4.15 m; table overall width: approx. 0.85 m; maximum clamping height: approx. 160 mm; maximum timber width: approx. 220 mm. Equipped with a positioning drive with 2 electric disc brakes, a highly swiveling positioning carriage, and 2 pneumatic clamping tongs, each with 4 spring-loaded upper clamping fingers, as well as 10 lower clamping jaws. Designed for self-assembly on a crosscut saw. Lrsdpfxeiqn D De Ab Nju

Kondisi: baik (bekas),

Kondisi: baik (bekas), Mesin cut-off ganda pneumatik untuk pemotongan kayu, bingkai, kusen, joinery, furnitur, dan berbagai material lainnya Data teknis: Panjang kerja mm 3000 Diameter mata pisau mm 300 Daya motor Hp 2,5 – Rpm 3000 Penggerakan manual 2 kepala Sudut potong dari 0 hingga 45° kanan dan kiri Pedal pneumatik untuk menurunkan kepala 2 penjepit pneumatik untuk mengunci benda kerja 2 port hisap diameter mm 50 Ljdpfx Aoxnxumob Njru Udara terkompresi 6 bar Dimensi keseluruhan mm 4000 x 700 x 1250 h Berat kg 520

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Mesin cross cut optimasi Salvador super push 200 Lrjdsxp Ig Uopfx Ab Neu

Kondisi: sangat baik (bekas), Gunting Bingkai Morso F Potongan miring ganda 45° Potongan miring lurus hingga 90° Lebar kerja maks.: 100 mm Ljdpfxsxmii Se Ab Njru Tinggi kerja maks.: 160 mm Penampang maks.: 65/65 mm Umpan hidrolik

Kondisi: baru, Tahun pembuatan: 2025, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to dust extraction Machine mounted on a mobile base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range Horizontal 45°- 90°- 25° Mitre range Vertical 60°- 90°- 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - Ljdpfow Hl Aqsx Ab Nsru We are also happy to offer you the appropriate saw blade upon request.

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 40.350 h, Baler Presona LP 85 VH2 with cross-tying, year of manufacture 2018 Technical specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Motor power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Filling chute: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 – 650 kg Theoretical throughput: 1,200 cbm/h Throughput at 30–100 kg/cbm: 13–30 t/h Ljdpsxm Shqjfx Ab Noru Tying: 5-fold vertical, 3-fold horizontal Hydraulic tank capacity: 2,000 L Transport dimensions (press): 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for any errors or inaccuracies in the information given. The offer is subject to prior sale, non-binding, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, dari mesin erosi (EDM) Pergerakan di X: 220 mm Ljdpfxsxmuy No Ab Njru Pergerakan di Y: 160 mm Display digital 2-sumbu Mitutoyo dengan akurasi tampilan 1/1000 mm . Kerangka bawah tanpa penilaian .

Kondisi: bekas, Tahun pembuatan: 1989, - Tinggi potong maks. [mm]: 80 - Diameter mata gergaji maks. [mm]: 350 - Kecepatan poros maks. [rpm]: 3700 - Tahun pembuatan: 1989 - Dokumentasi tersedia: Tidak - Nomor seri: 106 - Tegangan [V]: 380 Informasi keuangan PPN: Harga yang tertera belum termasuk PPN PPN/Perpajakan selisih: PPN dapat dikreditkan untuk pengusaha Pengiriman dan pengambilan tukar tambah selalu mungkin untuk semua peralatan industri Lrodpfx Abjxaniwe Neu Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2011, untertischkappsaege_avola_gama_65k_2011 Lrsdpfxewng S No Ab Neu

Kondisi: bekas, Tahun pembuatan: 2001, tertundergersåg HM-D 6500-R Serienummer: 319 Tilkoblingsspenning: 400V-11kW Vekt: 2450 kg Sagblad maks: 550 mm Ljdpfx Ajwng Sieb Nsru Sagblad min: 500 mm Borehull: 30 mm Lengde automatisk mate: ukjent Tilgjengelig fra august 2024 - Produksjonsår: 2001 - Dokumentasjon tilgjengelig: Nei - Serienummer: 319 Finansiell informasjon Merverdiavgift: Oppgitt pris er ekskl. merverdiavgift MVA / differansebeskatning: Merverdiavgift fradragsberettiget for næringsdrivende Levering og innbytte mulig når som helst innenfor industrisektoren Yorick Diebels

Kondisi: bekas, UTKS-HMZN8500-277 Ledpfxjwnhz Sj Ab Noru

Kondisi: bekas, Tahun pembuatan: 2005, tinggi total: 1.750 mm, panjang total: 1.350 mm, lebar total: 1.350 mm, 01 Lrjdpowq U Dxsfx Ab Nju

Kondisi: bekas, Tahun pembuatan: 2004, de-to-hu-it-lt-001 Lrodpfxewnhk He Ab Nou

Kondisi: bekas, Tahun pembuatan: 2002, - Tahun pembuatan: 2002 - Dokumentasi tersedia: Tidak Informasi keuangan PPN: Harga yang tertera belum termasuk PPN PPN/pajak selisih: PPN dapat dikreditkan untuk pengusaha Pengiriman dan tukar tambah selalu memungkinkan untuk segala jenis peralatan industri Yorick Diebels Lredpfxewnh T Ie Ab Nju