Beli Ctx Beta 500 bekas (16.641)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, KM 500-3500 C2 Tahun pembuatan: 2007 Jam operasional dalam mode otomatis: 60.000 jam Unit Penutup Gaya penjepitan: 5.000 kN Ukuran plat pemasangan: 1.270 x 1.310 mm Jarak antar tiang: 900 x 800 mm Tinggi cetakan minimum/maksimum: min 480 mm Lebar bukaan maksimal: 1.650 mm Unit Injeksi Diameter sekrup: 80 mm Volume injeksi: 1.543 cm³ Berat injeksi: 1.404 g Tekanan injeksi: 2.205 bar Peralatan Listrik dan Hidrolik Daya nominal motor pompa: 90 kW Daya pemanas: 44 kW Dimensi dan berat Berat bersih dengan panel kontrol: 27.090 kg Kledpfxsx Uqade Aa Nol Dimensi (P x L x T): 7,65 m x 2,55 m x 2,55 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, tinggi total: 2.300 mm, berat keseluruhan: 13.800 kg, panjang produk (maks.): 6.900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can process sheet thicknesses up to 6 mm. The machine can handle workpieces weighing up to 150 kg and offers a working area of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar compressed air. Contact us for further information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis working area: 2500 mm without repositioning • Y-axis working area: 1250 mm • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Electrical connected load: approx. 19 kVA • Required compressed air pressure: 6 bar • Includes a large set of punches, dies, and tool holders Ksdpjx Uqzzofx Aa Noll • The machine is in operational condition. Dimensions Machine depth 6000 mm

Kondisi: bekas, jarak tempuh: 680.000 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 04/2012, jenis bahan bakar: diesel, berat keseluruhan: 32.000 kg, konfigurasi gandar: 8x4, Perlengkapan: derek,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 406 mm, jarak gerak sumbu Z: 406 mm, berat benda kerja (maks.): 200 kg, lebar meja: 500 mm, kecepatan spindel (min.): 10.000 rpm, Perlengkapan: konveyor serpihan, For sale: HAAS UMC-500 5-Axis Universal Machining Center Condition: Brand new machine. Only one test workpiece manufactured. The unit has not been used and has been in storage for 2 years. Main Technical Specifications Travels: X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm Table: Diameter: 500 mm Maximum workpiece weight: 200 kg 5-axis rotary/tilting table (trunnion type) Spindle: Inline direct-drive 10,000 rpm 30 HP (22.4 kW) CAT 40 taper Through-spindle coolant: 300 psi (21 bar) Tool Changer: 30 tool positions Kodpsxg Nd Nefx Aa Njll Side-mount, high speed Accuracy and Compensation: Thermal compensation DWO/TCPC – Dynamic Work Offsets / Tool Center Point Control Rigid tapping Configuration and Equipment: Haas NGC CNC control (compatible with FANUC) 1 GB memory Ethernet port, WiFi connectivity USB port, 15” color LCD display Early power-failure detection module Memory lock (keyswitch) Spindle cooling system Protective enclosure with doors Worklight Centralized lubrication system Top cover Measurement and Calibration Equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macro programming, spindle orientation, coordinate rotation and scaling) Rotary-Axis calibration tool Remote jog pendant (RJH) with color display Chip and Coolant Systems: Coolant tank – 95 gallons (360 L) First fill with Blaser coolant emulsion Chip conveyor (belt-type, CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application The Haas UMC-500 is a compact yet powerful universal 5-axis machining center, designed for the production of complex, multi-sided, and free-form surface components. Suitable for both simultaneous 5-axis machining and 3+2 technology, enabling a significant reduction in part setups and ensuring high accuracy. For further questions, please do not hesitate to contact us.

Kondisi: baik (bekas), Anschlagwinkel, Schlosserwinkel, Kontrollwinkel - Hersteller: Horex, Anschlagwinkel DIN 875/2 - Typ: 1000 x 500 mm - Genauigkeitsgrad: 2 - Anzahl: 5x Anschlagwinkel vorhanden - Preis: pro Stück - Abmessung: 1010/500/H50 mm - Gewicht.: 7 kg/St. Kledpfx Aajx Tn U Ns Nel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 18.000 rpm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 100 mm, beban meja: 20 kg, Harga baru mesin sebesar 39.875 EUR! RINCIAN TEKNIS Area gerak Perjalanan sumbu X: 500 mm Perjalanan sumbu Y: 500 mm Perjalanan sumbu Z: 100 mm Meja alur X: 700 mm Y: 570 mm Kjdpfx Aaex Hfzms Nsll Beban maksimal meja: 20 kg Data spindle Daya spindle HFS: 80 W Kecepatan spindle HFS: 18.000 rpm Gerakan Kecepatan rapat: 100 mm/detik Akurasi pengulangan: 0,01 mm Konektor alat: 6 mm RINCIAN MESIN Koneksi listrik: 240 V Perangkat lunak: Signumeric PERLENGKAPAN Penutup pelindung tipe bellows Rantai penuntun kabel Spindle gravir Jäger 42-2 W27 FS inkl. inverter frekuensi Konstruksi bawah diperkuat Pembuangan panas melalui dudukan spindle Kabel keluar 2 m Adaptor fleksibel untuk alat penanda listrik pelanggan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Area kerja: 2500 x 1280 mm Kekuatan punching: 220 kN Kljdpfx Ajx Tr S Soa Nol Untuk ketebalan pelat hingga: 8 mm Berat sekitar: 11 t

Kondisi: baik (bekas), jarak tempuh: 706.712 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 06/2017, jenis bahan bakar: diesel, ukuran ban: 315/80R22,5, konfigurasi gandar: 4x2, jarak roda: 3.700 mm, bahan bakar: diesel, warna: biru, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: baja-udara, panjang total: 5.920 mm, lebar total: 2.550 mm, tinggi total: 3.600 mm, Tahun pembuatan: 2017, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kunci sentral, pemanas parkir, pendingin udara, pengaturan jendela elektrik, spion elektrik,

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 6.000 h, de-to-hu-it-lt-lv-nb-nl-pl Klodpfx Aaexy Etyj Nol

Kondisi: bekas, Tahun pembuatan: 1997, 1 Ksdpevuk T Ejfx Aa Nsll

Kondisi: bekas, Tahun pembuatan: 1991, Pressure: 500 t Upright spacing: 3,200 mm Stroke: 1,250 mm Distance table/ram, max. stroke up, adjustment up: 1,810 mm Table size: 3,000 x 1,900 mm Cushion pressure in ram: 150 t Cushion stroke in ram: 200 mm Cushion area in ram: 2,400 x 1,200 mm Ram area: 3,160 x 1,900 mm Downstroke speed: from 400 mm/s Return stroke speed: 250 mm/s Working speed: 18 - 58 mm/s Height above floor: 6.5 m Drive power: 90.0 + 36.5 kW Weight: 110 t Approved for manual loading operations according to German accident prevention regulations (UVV) Features: - Oil-hydraulic drive - Hydraulic cushion in ram Kjdpfjvuk Txox Aa Nsll - Ram lock Year of construction: 1976 – Modernized: 1991 Condition: As is, not commissioned, partially disassembled and stored

Kondisi: bekas, Tahun pembuatan: 1983, Pressing force: 500 t Column gap: 2,240 mm Stroke: 1,180 mm Distance table/ram, max. stroke up, adj. up: 1,800 mm Table surface: 2,050 x 1,800 mm Blank holder force in table: 250 t Blank holder stroke in table: 380 mm Blank holder area in table: 1,800 x 1,200 mm Blank holder force in ram: 122 t Blank holder stroke in ram: 200 mm Blank holder area in ram: 1,800 x 1,200 mm Ram surface: 2,215 x 1,800 mm Table height above floor: 500 mm Kjdpfx Ajvuk Tloa Nsll Speed downwards: from 400 mm/s Speed upwards: 10 - 400 mm/s Working speed: 10 - 100 mm/s Height above floor: 6.8 m Foundation depth: 3.0 m Drive power: 120 kW Weight: 110.0 t Space requirement (WxDxH): 3.6 x 2.2 x 8.5 m Approved for manual loading according to German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic blank holder in table and ram, cutting stroke damping, ram locking Foundation depth approx. 3.0 m As is, as stored, partially disassembled

Kondisi: bekas, Tahun pembuatan: 1978, Material width 500 mm Coil weight 6.5 t Material thickness 0.5 - 1.5 mm Kledpfx Ajvuunaja Nel Coil inner diameter 420 - 560 mm Coil outer diameter 1500 mm Number of straightening rolls 17 Straightening roll diameter 50 mm Number of feed rolls 4 Speed 6 - 60 m/min Space requirement of straightening machine (WxDxH) 2.3 x 1.3 x 1.7 m Space requirement of decoiler (WxDxH) 1.3 x 1.2 x 2.0 m Straightening machine (Type R 500) with continuously adjustable drive, manually and centrally adjustable roller housing Double decoiler (Type LH 2-1.5-500) with hydraulic central expansion, hydro-mechanical overrun brake as is and as it stands, WITHOUT commissioning, WITHOUT hydraulic power unit

Kondisi: bekas, Tahun pembuatan: 1993, Pressing force 500 t Ksdevuk I Nspfx Aa Noll Upright distance 2,240 mm Stroke 1,180 mm Distance table/ram, max. stroke up, adjustment up 1,800 mm Table surface 2,050 x 1,800 mm Cushion force in table 250 t Cushion stroke in table 380 mm Cushion area in table 1,800 x 1,200 mm Cushion force in ram 122 t Cushion stroke in ram 200 mm Cushion area in ram 1,800 x 1,200 mm Ram area 2,215 x 1,800 mm Table height above floor 500 mm Speed down from 400 mm/s Speed up 10 – 400 mm/s Working speed 10 – 100 mm/s Foundation depth 3.0 m Drive power 122 + 75 + 64.5 kW Weight 110.0 t Space requirement (W x D x H) 3.6 x 2.2 x 8.5 m Height above floor 6.8 m Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table and ram, blanking shock absorber, ram locking Foundation depth approx. 3.0 m Press currently being overhauled with Siemens S7 control / Pilz safety control A sister machine can also be offered as-is, partially disassembled.

Kondisi: bekas, Tahun pembuatan: 1990, de-HU-01 Klodovut Tbjpfx Aa Nsl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Mori Seiki NL2000Y/500 Mesin Bubut CNC (05/2007) Pabrikan: Mori Seiki Tipe: NL2000Y/500 Tahun pembuatan: 05/2007 Kondisi: bekas, sangat baik, dalam produksi Kontrol: MSX-850II Opsional dengan alat dan aksesori. Klodpfx Aaox Tp N Is Njl

Kondisi: bekas, Tahun pembuatan: 1999, Diameter penggerindaan 300 mm Panjang penggerindaan 500 mm Tinggi senter 150 mm Tampilan digital 2 sumbu Mitutoyo Ka Counte Perangkat filter sabuk Knoll PF 70 Chuck magnetik: ya Pelat tipe tidak ditemukan Ksdpfxoxzu Aaj Aa Nell

Kondisi: baik (bekas), Scale Brand: Massi Klsdpfx Aedx D T Eoa Nel Measuring length: 500 mm Jaw length: 150 mm Total length: 670 mm

Kondisi: sangat baik (bekas), Tuschier plate Space requirement: Width: 600 mm Kodpfxsg Af U Eo Aa Noll Depth: 500 mm Height: 90 mm

Kondisi: bekas, Micrometer caliper Kodpfx Aajby Rggo Njll Measuring range: 475 - 500 mm Supplied in wooden case

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Mesin perfect binder dalam kondisi sangat baik Klsdpfxsyalvvj Aa Nol

Kondisi: bekas, jarak tempuh: 331.000 km, Tahun pembuatan: 2019,

Kondisi: baik (bekas), Konveyor rol yang digerakkan, Panjang 2450 mm, lebar 620 mm, Motor gearbox NORD, data sesuai dengan nameplate, Untuk pengoperasian konveyor rol diperlukan pemasangan kontrol, sebaiknya dengan inverter frekuensi untuk mengatur kecepatan. Konveyor rol telah dipasang di atas lantai. Lihat foto terlampir dengan pelat perata. Harga per unit Tersedia 24 unit Kodjx Tfrxepfx Aa Nell

Tahun pembuatan: 2019, Kondisi: baik (bekas), The granulation line consists of a belt conveyor, an agglomerator technologically integrated with the extruder, and a two-stage, co-rotating twin-screw extruder with L/D ratios of 28:1 and 12:1. The extruder is equipped with a degassing system, hydraulic screen changer, water ring pelletizer, centrifuge, vibratory feeder with screen, pneumatic conveyors, buffer tank, and automatic control system with a control cabinet. This line is a reliable recycling machine suitable for plastic film, bags, scraps (≤ 0.5 mm), and other soft PE/PP waste. It features a compact design, ergonomic layout of individual components, smooth operation, easy maintenance, low noise, and low energy consumption. The control panel is dedicated exclusively to the line and contains all electrical parts for all devices in the line, all equipped with international high-quality components, including Siemens low-voltage equipment, Fuji inverter, Omron temperature controller, etc., which ensures reliable operation of the production line. Additionally, the control panel is equipped with a door interlock safety device. When the door is opened, the power supply is cut off and there is no voltage in the panel, making inspection and maintenance much safer with no risk of electric shock. Once the door is closed, the power is restored. Feed material requirements: - Washed PE/PP films or bags - Thickness ≤ 0.5 mm - Raw materials must be free of oil, metals, and other contaminants. Environmental operating conditions: - No freezing or condensation points - Temperature: 0 ~ 40°C Kodpfjvlxufox Aa Nsll Operating conditions: - Power supply: 3-phase 380V, 50Hz - Installed power: ~480 kW - Required water supply: ~10 m³/h Year: 2019 Model: PRP-500

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, WEEKE BHX 500 – Operator Side Right Weeke machining center with one machining support each on the top and bottom Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2500 mm Min. workpiece width: 70 mm Max. workpiece width: 1000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit, each located in the upper and lower machining support, with 21 drilling spindles each (individually addressable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in the upper and lower machining support, each with 10 drill spindles individually selectable via the control software: 8 spindles each in the X-direction 2 spindles each in the Y-direction N2 X-Y 90° Grooving saw unit, each located in the upper and lower machining support for machining in the X-Y direction, swiveling 90°. Cutting depth: 30 mm SUPPLEMENT FOR GROOVING SAW BLADE Saw blade width may be 8.4 mm. The chip removal cross-section must not exceed 70mm². F2-ETP-6 KW Milling unit, each located in the upper and lower machining support, suitable for use with shank tools. Klodpfx Aasx S Hzle Nsl Manual tool change. Tool clamping: manual hydro quick-release system ETP 25 Rotation direction: clockwise/counterclockwise Spindle speed: 6,000 – 18,000 rpm, infinitely programmable Processing up to 3000 mm Infeed table with automatic workpiece feeding and positioning Workpiece removal area with cross-belt conveyor and lifting arms – Workpiece length measuring system integrated in the machine – Movable operator terminal – Barcode software incl. scanner