Beli Cypress Welding Equipment bekas (43.896)

Kondisi: bekas, Fungsionalitas: belum diuji, jenis arus masuk: tiga fasa, tinggi total: 3.000 mm, panjang total: 3.000 mm, tegangan masuk: 380 V, jenis pendinginan: air, arus pengelasan pada siklus kerja 60%: 1.000 A, arus pengelasan pada siklus tugas 100%: 800 A, arus pengelasan (min.): 250 A, arus pengelasan (maks.): 1.250 A, Dijual: Unit las sub-arc ESAB bekas, buatan ESAB AB / ESAB Welding Equipment AB, Swedia. Unit ini dirancang untuk pengelasan sub-arc terotomatis (UP/SAW), termasuk tandem welding AC/DC. Cocok untuk pengelasan jahitan lurus panjang, balok, profil, struktur pelat, produk silinder, bejana, tangki, dan struktur berat. Produsen: ESAB AB / ESAB Welding Equipment AB Negara: Swedia Proses: UP / SAW – pengelasan sub-arc Tipe: Unit pengelasan terotomatis / sistem tandem welding Keterangan: UP Tandemschweißen Pengelasan: DC + AC dengan sumber listrik ESAB Kepala las: Tersedia, dengan hopper flux Girder/rail: Girder las ESAB panjang / traktor Kondisi: Sudah dibongkar/disimpan, tersedia untuk inspeksi dan pengujian Sumber daya las: ESAB TAE 800 Model: ESAB TAE 800 Rentang: 300 A / 28 V – 800 A / 44 V 100% duty cycle: 800 A / 44 V 60% duty cycle: 1000 A / 44 V Daya masuk: 400 / 415 / 460 / 500 V, 50 Hz Perlindungan: IP23 ESAB LAE 1250 Model: ESAB LAE 1250 Tipe: Rectifier las Rentang: 250 A / 24 V – 1250 A / 44 V 100% duty cycle: 1250 A / 44 V Daya masuk: 220 / 380 / 415 / 500 V, 50 Hz Perlindungan: IP22 Bobot: 490 kg Data pengelasan tandem: Mode Arus Tegangan DC 520–580 A 28–30 V AC 550–620 A 34–36 V Kecepatan pergerakan: 680–800 mm/menit. Kelengkapan: Fpedpfxszimbko Alyok - Girder las ESAB panjang / sistem pengendali gerak - Kepala las - Hopper flux - Kabel dan selang - Kotak kontrol - ESAB TAE 800 - ESAB LAE 1250 - Perlengkapan pengelasan sub-arc Kondisi: Unit pernah digunakan dan kini dibongkar/disimpan di luar operasi. Ada tanda pemakaian, debu, kotoran, dan bekas penonaktifan. Dijual apa adanya, dengan perlengkapan sesuai yang tampak pada foto. Disarankan inspeksi langsung dan pengujian teknis oleh pembeli sebelum transaksi.

Kondisi: belum diuji (bekas), for sale as shown in the picture Fjdoh Ti R Njpfx Alyopk

Kondisi: baik (bekas), Tahun pembuatan: 2007, panjang poros: 1.064 mm, No. Artikel Internal: 26037 Mesin Las Laser Rofin Starweld 90 Tahun Pembuatan: 2007 Laser YAG Daya: 4,5 kW Daya Laser: 90 W Daya Puncak Pulsa: 5,5 kW Durasi Pulsa: 0,3 - 20 ms Panjang Gelombang: 1064 nm Fpedoy D Nlqopfx Alyjk Dimensi (P x L x T): 100 x 50 x 100 cm Diukur tanpa meja dan rakitan tambahan Berat: sekitar 170 kg Sayangnya, mesin ini tidak dapat dioperasikan di tempat saya karena harus terhubung ke sirkulasi air dengan air deionisasi. Selain itu, muncul peringatan error yang mengharuskan pemeriksaan kabel serat optik.

Kondisi: baru, Jumlah: 80 posisi Berat: 150 kg Kondisi: baru Diameter lubang: 28 mm Dimensi P x L x T: 0,8 x 0,6 x 0,05 m Set khusus 80 bagian, sistem 28 mm Bahan: baja kualitas blued Paket pengiriman: lihat gambar Meja tidak termasuk dalam pengiriman!! Fpsdsyv I Eyjpfx Alyjk

Kondisi: baru, de-hu-001 Fsdpfeyq Sumsx Alyspk

Kondisi: baru, 01 Fedpfsyq Sq Iex Alyepk

Kondisi: baru, 0 Fpedpfx Asyq Sqhslyjk

Kondisi: baru, 001 Fpjdpsyq Sqbefx Alyok

Kondisi: baru, 020520 Fsdpfxswirrds Alyspk

Kondisi: baru, Condition: new Stock number: 2486 Delivery time: immediate, subject to prior sale Price: €545 In stock: 1 Fpsdpswirlqsfx Alyjk Bore: 28 mm Tools are not included in the price.

Kondisi: baru, neu-werkzeugsatz-his16 Fjdpfxoyq Sp Ro Alyepk

Kondisi: bekas, USED CONDITION Stock number: 2468D Delivery time: immediate, subject to prior sale Country of origin: Germany Price: €2,970 Stock: 1 unit Special price: €1,890 Weight: 195 kg Hole diameter: 28 mm DEMO SET / AS NEW CONDITION Consisting of: Fsdpfx Aeyq Spqjlyepk * 1x accessory trolley (supplied galvanized) * 4x fixed stop angles 350 x 20 mm * 4x adjustable stop angles 250 x 20 mm * 15x adjustable clamps * 4x multi-clamps * 6x adjustable support brackets 175 x 20 mm * 2x adjustable support brackets 225 x 21 mm * 8x stop rails 225 x 20 mm * 10x dowel pins * 15x plug-in holders * 3x ball locking pins * 4x claw clamp bolts 28 x 100 mm * 15x spacer rings

Kondisi: baru, Clamping range of chuck: 10 – 200 mm Height: 67.5 mm Bore: 65 mm Fpsdpfsfv Awlex Alyek Outer diameter (chuck): 200 mm Outer diameter (clamping lever): 360 mm Weight: 4 kg Features: • Self-centering • Reversible jaws • Fixed clamping levers allow for rapid workpiece changeover • Lightweight, low-profile design minimally affects the center of gravity The D-D quick-action chuck allows for rapid product changeovers and is ideal for frequent part swaps. No loose quick-release wrench is required, as the levers are integrated into the quick-action chuck.

Kondisi: baru, Clamping range of chuck 120 - 380 mm Height 95 mm Passage 170 mm Outer diameter of chuck 400 mm Outer diameter of clamping lever 600 mm Weight 26 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable quick workpiece changes. • Low weight and flat design result in minimal change of the center of gravity. Fodpfjfv Awtox Alyspk The D-D quick-change chuck enables rapid product changes and is excellently suited for frequent component exchanges. No separate quick-change key is required, as the levers are integrated into the quick-change chuck.

Kondisi: baru, Clamping range of the chuck: 200 - 500 mm Height: 110 mm Fedpjfv Awwefx Alyopk Passage: 240 mm Outer diameter of the chuck: 320 mm Outer diameter of the clamping lever: 700 mm Weight: 56 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers allow for rapid workpiece changes. • Low weight and flat design cause minimal shift in the center of gravity. The D-D quick-action chuck allows for fast product changes and is ideally suited for frequent component changeovers. No separate quick-action key is required, as the levers are integrated into the quick-action chuck.

Kondisi: baru, Clamping range of the chuck: 80 - 280 mm Height: 67.5 mm Through-hole: 100 mm Fpedpefv Awpsfx Alyek Outer diameter of chuck: 300 mm Outer diameter of clamping lever: 480 mm Weight: 13 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable rapid workpiece changes. • Low weight and flat design ensure minimal shift in center of gravity. The D-D quick-change chuck enables fast product changeovers and is ideal for frequent component changes. No separate quick-release wrench is required, as the levers are integrated into the quick-change chuck.

Kondisi: baru, Quantity: 70 positions Weight: 90 kg Condition: New Hole diameter: 28 mm Special set 70 / 28 70-piece, 28mm system, consisting of: 3x Tube screw clamp D28 90° – . 4028397 3x Tube screw clamp D28 180° – . 4028396 3x Tube screw clamp D28 45° – . 4028398 3x Tube screw clamp D28 300x150 – . 4028399 3x Tube screw clamp D28 300x200 – . 4028400 15x Ball lock pin D28x50 – . 4027663 10x Locking pin D28x80 – . 4028876 4x Universal stop D28 100x50x25 mm – . 4028469 4x Universal stop D28 150x50x25 mm – . 4028470 4x Universal stop D28 225x50x25 mm – . 4027657 2x Universal stop D28 300x50x25 mm – . 4027659 2x Stop angle clamp D28 75x50x75x25 mm – . 4028657 2x Stop angle clamp D28 175x50x75x25 mm – . 4028658 Fedpfowth N Tjx Alyjpk 2x Stop angle clamp D28 175x50x175x25 mm – . 4028649 2x Stop angle clamp D28 175x50x75x25 mm – . 4028652 2x Stop angle clamp D28 175x50x175x25 mm – . 4028653 2x Stop angle clamp D28 275x50x175x25 mm – . 4028654 2x Stop angle clamp D28 300x275x100 mm (1x left, 1x right) – . 4028847 2x Flat angle bracket D28 175x175x25 mm 1x slot + 3x circular holes – . 4028655

Kondisi: baru, Number of items: 27 positions Weight: 52 kg Condition: new Hole diameter: 28 mm P-Set 1: 27 pieces, 28 mm system (for 15 mm table thickness), consisting of: Clamps: 5 pcs. Sk.100/350 mm Stop: 2 pcs. 500 mm Stop: 2 pcs. 150 mm Angle: 2 pcs. 175 x 175 mm Flat angle: 2 pcs. 350 x 250 mm Flat angle: 2 pcs. 275 x 150 mm Eccentric discs: 2 pcs. 100 mm Quick-release screws: 10 pcs. Fsdogp Dyuopfx Alyepk Number of items: 33 positions Weight: 52 kg Condition: new Hole diameter: 28 mm

Kondisi: baru, de2hu-it-lt-batch1 Fpjdpfeupxkqex Alyjk

Kondisi: baru, Number of positions: 24 Weight: 22 kg Condition: new (0) Basic Set 1 / 24-piece Suitable for table top thicknesses of 15 and 25 mm 4 pcs. clamps, clamping height 300 mm, throat depth variable 8 pcs. clamping bolts 2 pcs. stop 100 mm 4 pcs. stop 150 mm 2 pcs. stop 225 mm 1 pc. torch holder Fsdpfjupxh Aex Alyopk 1 pc. hole brush 30 mm 1 pc. separating lotion 500 ml 1 pc. welding table cleaner, natural/biological base, 500 ml

Kondisi: baru, Number of items: 32 positions Fpodpfx Aoupxfnjlysk Weight: 35 kg Basic Set 2 / 32-piece Suitable for table top thicknesses of 15 and 25 mm 6 pcs. screw clamps 12 pcs. quick-release clamping bolts 2 pcs. universal stop 100 mm 4 pcs. universal stop 150 mm 2 pcs. universal stop 225 mm 2 pcs. stop and clamping angle 175 mm 1 pc. hole brush 300 mm 1 pc. torch holder 1 pc. anti-spatter spray 500 ml, natural, bio-based 1 pc. welding table cleaner 500 ml, natural, bio-based

Kondisi: baru, 43 items Weight: 40 kg Condition: new Basic set 3 / 43-piece For table top thicknesses: 15mm and 25mm 6 pcs. screw clamps Fpjdpfx Asupxbvslyjk 12 pcs. quick-action clamping bolts 6 pcs. universal stop 150mm 4 pcs. universal stop 225mm 2 pcs. universal stop 100mm 2 pcs. stop and clamping brackets 175mm 2 pcs. stop and clamping brackets 275mm 2 pcs. prisms 60mm 1 pc. eccentric stop, 100mm diameter 1 pc. torch holder 1 pc. hole cleaning brush, 30mm 2 pcs. release agent, 500ml, natural, bio-based 2 pcs. welding table cleaner, 500ml, natural, bio-based

Kondisi: baru, de_001 Fsdpfx Asyv I Hdelyjpk

Kondisi: baru, ID-20240608-01 Fedpsyv I Etsfx Alyepk

Kondisi: baru, 93-posisjonssett, vekt: 320 kg, tilstand: ny, hullstørrelse: 28 mm, dimensjoner (L x B x H): 1,0 x 0,6 x 0,85 m, spesialsett 93-deler, 28 mm-system, inkl. verktøyvogn, materiale: brunert kvalitetsstål, leveringsomfang: se bilder. Fodpfx Alsyv I Eajyepk