Beli Cytomics Fc 500 bekas (16.715)

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, warna: lain, Tahun pembuatan: 2025, de Fjdpfx Aasxqhy Regjfw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, berat keseluruhan: 1.550 kg, kecepatan pemotongan: 2.800.000 mm/menit, el Ffjdpfeyhfm Dsx Aagew

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 210 mm, jarak gerak sumbu Z: 525 mm, produsen pengendali: HEIDENHAIN, model controller: NA, jumlah sumbu: 3, en Fjdpfx Ajylagtsagjfw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, tinggi total: 2.300 mm, berat keseluruhan: 13.800 kg, panjang produk (maks.): 6.900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can process sheet thicknesses up to 6 mm. The machine can handle workpieces weighing up to 150 kg and offers a working area of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar compressed air. Contact us for further information about this machine. Fjdpfx Aasx Uqzzogofw • Maximum punching force: 220 kN (approx. 22 t) • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis working area: 2500 mm without repositioning • Y-axis working area: 1250 mm • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Electrical connected load: approx. 19 kVA • Required compressed air pressure: 6 bar • Includes a large set of punches, dies, and tool holders • The machine is in operational condition. Dimensions Machine depth 6000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 65.000 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, tinggi total: 2.355 mm, berat keseluruhan: 14.000 kg, panjang produk (maks.): 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has logged approximately 65,000 operating hours, and is in excellent condition. Please contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Clamping platen opening stroke: 1,300 mm • Clamping platen dimensions (W x L): 1,270 x 1,260 mm • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 Ffsdox Nr Uxepfx Aagew • Locating ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 6.929 h, produsen pengendali: HEIDENHAIN, model controller: TNC 530, jumlah sumbu: 5, This 5s POSmill H 500 U was manufactured in 2017. It is equipped with a Heidenhain TNC 530 control, a tool magazine with 60 stations, and a KESSLER rotary table with a diameter of 500 mm. The machine features advanced systems such as automatic coolant level monitoring and a BLUM laser tool measurement system. Take the opportunity to purchase this POSmill H 500 U vertical machining center. Contact us for further information. • Tool magazine: 60 stations, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through spindle • Internal coolant supply: 20 bar, with belt filter system • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media feed in table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D probe system); including workpiece measuring preparation • Viewing: Includes rotary viewing window • Collision monitoring: POS DCM collision monitoring module • Condition: Excellent condition • Operating hours: 6,929 • Accessory note: Without tool holders and without quick-clamping system Additional equipment Fedpfxoyir Dxe Aagefw • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic power unit, controlled via M function

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 590 mm, daya motor spindle: 11.000 W, tinggi total: 2.120 mm, berat keseluruhan: 5.500 kg, panjang produk (maks.): 2.900 mm, jumlah sumbu: 3, This DMG Mori Seiki NLX1500MC/500 horizontal lathe was manufactured in 2014. It offers a maximum turning diameter without interference of 366 mm, an X-axis travel of 260 mm, and a Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret featuring 12 live stations, this is a unique opportunity to acquire a DMG Mori Seiki NLX1500MC/500 horizontal lathe. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all live), index time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status indicator • Air-conditioned control cabinet • Condition/Availability: Machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Fjdpfsyg Iclsx Aagsfw Additional equipment • Chip conveyor • Bar loader interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1,000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus, size 65 • HAINBUCH collets: Ø 6.5 - 10 - 16 - 18 - 20 - 25 - 26 - 30 - 40 mm • Square collets: 20×20 - 35×35 - 40×40 mm • Hexagonal collet: 14 mm • Tool measuring probe • 7 driven tool holders (3 axial, 4 radial) • 15 static tool holders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation and CD-ROM • Clamping brackets for transport and handling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, produsen pengendali: MITSUBISHI, jumlah sumbu: 3, MORI SEIKI NL 2000 SY/500 3-sumbu ini diproduksi pada tahun 2005. Ini adalah mesin bubut horizontal dengan antarmuka BF dan alat bertenaga, serta memiliki penukar alat pada kedua spindle. Jika Anda mencari mesin bubut dan milling berkualitas tinggi, pertimbangkan MORI SEIKI NL 2000 SY/500 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Keunggulan Mesin Keunggulan Teknis Mesin • Alat bertenaga akan menyusul • Penyetelan alat pada kedua spindle Fjdpfxsyaim Es Aagjfw Informasi tambahan Mesin masih dalam keadaan terpasang listrik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 61.469 h, produsen pengendali: TRUMPF, model controller: TASC 6000, This TRUBEND Cell 5000 featuring the TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, equipped with 6-axis backgauge sensor technology. Ensures highest repeat accuracy thanks to angle measuring technology (ACB) in automated operation. Features a robust all-steel frame, electro-hydraulic upper drive, and modern block hydraulics. The machine is controlled by the TRUMPF TASC 6000 with a 15-inch touchscreen and network capability. The TRUMPF TruBend Cell 5000 press brake is ideal for precise bending tasks. Contact us for further information on this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Press beam with spherical bearings and tilt adjustment • Electro-hydraulic upper drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure scale • Measurement system with glass scale and spring compensation • Hydraulic oil within the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Backgauge/stop • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool displacement, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz Ffedpfx Aox Imqljagow • 2 GB RAM • 15-inch touchscreen • Network capable • Teleservice via modem • Operation • Control panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety equipment • BendGuard safety device for upper tools up to 390 mm • CE marking Additional Equipment • TRUMPF BendMaster automation (standard equipment) • Robot/handling • Stable base and manipulator made of die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile, welded floor rail • Sheet sensor for contour detection • Rotary union for easy gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double-sheet detection • NC gripper handover station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operating terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access door World's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Highest repeatability thanks to angle measuring technology (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 17.550 h, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 360 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530 HSCI, berat keseluruhan: 6.800 kg, kecepatan spindel (maks.): 42.000 rpm, jumlah sumbu: 3, Mesin 3-sumbu +GF+ MIKRON MILL S 500 ini diproduksi pada tahun 2017. Mesin ini memiliki lintasan 600mm x 450mm x 360mm, kecepatan spindle hingga 42.000 rpm, dan ukuran meja kerja 590x450mm. Mendukung berat benda kerja maksimal 200 kg. Ideal untuk pekerjaan pemesinan yang detail dan presisi. Hubungi kami untuk informasi lebih lanjut. • Kecepatan sumbu (X/Y/Z): 61 m/menit • Ukuran meja kerja: 590 x 450 mm • Berat benda kerja maksimum: 200 kg Fodpsx Nr Rgsfx Aagjfw • Dimensi benda kerja maksimum: 1000 x 700 x 400 mm • Antarmuka / kontrol: Heidenhain TNC 640 • Catu daya: 3x400 V, 3 fasa, 50 Hz

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 3.371 h, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 470 mm, tinggi total: 2.933 mm, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 18.500 W, berat alat: 8.000 g, panjang produk (maks.): 2.570 mm, jumlah sumbu: 5, This Mazak CV5-500 5-axis vertical machining center was manufactured in 2023. It features a maximum spindle speed of 12,000 rpm, a two-stage electric gearbox, and rapid traverse speeds of 36 m/min in the X, Y, and Z axes. The machine supports a table load of 200 kg and is equipped with a 30-position automatic tool changer. Ideal for complex, multi-axis precision machining. Please contact us for further information on this machine. • Electrical Load • Apparent Power (40% duty cycle): 45.5 kVA • Continuous Apparent Power: 43.4 kVA • Electrical Connection: 3-phase AC 380/400/415/440/460/480 V ±10%; 50/60 Hz ±1 Hz • Pneumatics • Pressure: 5–9 bar • Flow rate: 26 l/min • Air blow through spindle: 345 l/min • Spindle • Spindle nose: steep taper 40° • Gear stages: 2-stage (electric) • Rated power (AC inverter motor): 18.5 kW (10% duty cycle), 15.0 kW (25%), 11.0 kW (40% and continuous) • Maximum torque: 119.4 Nm (10%), 95.5 Nm (25%), 70.0 Nm (40%); continuous 57.3 Nm • Axes, feed rates, rapid traverse • Number of simultaneously controlled axes: 5 • Rapid traverse X/Y/Z: 36 m/min • Rapid traverse B/C: 30 min⁻¹ • Feed rates X/Y/Z: 36,000 mm/min • Table • Diameter: 500 mm • Threaded holes: M16 × 2 • Reference hole: Ø50 mm H6 (+0.016 / -0.000 mm) • Workpiece capacity • Maximum diameter: 500 mm • Maximum height: 320 mm • Travels / Working range • B-axis swiveling/indexing: 220° (±110°), 0.0001° • C-axis swiveling: 360° • Distance, spindle nose to table surface (horizontal): 50–520 mm • Distance, spindle nose to table center (vertical): 95–565 mm • Automatic tool changer • Tool positions: 30 (optional magazine: 48) • Selection: random, shortest path • Tool holder: MAS BT 40 or SK 40 • Pull stud: Yamagaxi ANSI type • Max. tool diameter: 80 mm (adjacent occupied) / 125 mm (adjacent free) • Max. tool length: 300 mm • Tool change time (chip-to-chip): 4.60 s • Tank capacities • Guideway/ballscrew lubrication: 1.80 l • Hydraulic oil: 5.0 l • Coolant for spindle: 26.0 l • Option: 18,000 rpm spindle coolant (oil tank): 60 l • Total tank volume: 320.0 l Additional equipment • Monitoring / data acquisition package • Analog inputs: 4 × 0–10 V • Digital inputs: 8 • ACC-SENSOR.1AXIS.10M: 1-axis acceleration sensor with 10 m cable • Active power sensor (dimensions: 8105 × H85 mm) • Toolscope IP for DIN rail Rev.4 Fodpfoyf H Tyjx Aagefw • Industrial PC functionality in the control cabinet • Communication and control via HMI • PM: tool and process monitoring • Tool breakage detection • Self-learning wear limit • Fixed and dynamic tolerance bands • Process performance monitoring strategy • Collision monitoring with all Goliog • DIN rail mounting in control cabinet • Dimensions: 812 × H90 × D62 mm • Documentation including Toolscope • Chip conveyor (dimensions: machine width 3,365 mm including chip conveyor)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 510 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: MAZATROL, model controller: Matrix, lebar meja: 400 mm, panjang meja: 500 mm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.000 W, jumlah slot dalam magazin alat: 40, jumlah sumbu: 5, Mazak Variaxis 500-5X II 5-sumbu ini diproduksi pada tahun 2007. Ideal untuk tugas pemesinan yang kompleks dan presisi, pusat pemesinan vertikal ini menawarkan fleksibilitas dan keandalan. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan Mazak Variaxis 500-5X II yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. Perlengkapan tambahan • Konveyor serbuk sisa pemotongan Keunggulan mesin Fedoyalk Hopfx Aagsfw Keunggulan teknis • Sumbu A: -120° / +30° • Sumbu C: 360° Informasi tambahan Mesin masih dalam kondisi tersambung listrik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 710 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: FANUC, model controller: Series 0i-MC, lebar meja: 500 mm, panjang meja: 500 mm, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 18.500 W, jumlah sumbu: 3, Leadwell LCH-500 Horizontal Machining Center ini dibuat pada tahun 2006. Mesin ini dilengkapi dengan kontrol Fanuc Seri 0i-MC dan memiliki 3 sumbu. Mesin memiliki kecepatan spindle 10.000 rpm dan dalam kondisi baik. Perlengkapan tambahan • Konveyor serpihan Keunggulan mesin Keunggulan kualitas • Kondisi baik Keunggulan teknis • Jarak meja–hidung spindle: 50–660 mm • Sambungan spindle ISO 40 • Majalah alat 40 posisi • Tekanan pendingin 20 bar Fsdjyi Elvspfx Aagefw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 552 mm, jarak gerak sumbu Z: 300 mm, tinggi total: 2.750 mm, lebar total: 3.015 mm, berat keseluruhan: 9.500 kg, kecepatan spindel (maks.): 42.000 rpm, daya motor spindle: 14.000 W, panjang produk (maks.): 2.510 mm, jumlah sumbu: 3, This 3-axis vertical machining center RÖDERS RHP 500 was manufactured in 2007. It features a machining range of 500 mm × 552 mm × 300 mm and a table size of 600 mm × 540 mm. The machine is equipped with a milling spindle capable of up to 42,000 rpm and has a tool changer with 42 positions. If you are looking for high-quality machining capabilities, you should consider the RÖDERS RHP 500 machine we are offering for sale. Contact us for further details. Fedpfx Aoymm T Noagofw • Table size: 600 × 540 mm • Maximum distance between spindle nose and table: 455 mm • Maximum workpiece weight: 400 kg • Feed rate: 0-60,000 mm/min • Milling spindle (standard): HSK E40, max. tool diameter 16 mm (others on request) • Tool changer: 42 positions, chain-type, loadable during machining; integrated tool measurement laser • Chip disposal: Double-screw discharge into rear chip box Additional equipment • Optional chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jarak pergerakan sumbu X: 620 mm, jarak lintasan sumbu Y: 820 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC-530, This 5-axis POSmill H 500 U from 2018 is a vertical machining center featuring travel ranges of X-620, Y-820, Z-650 mm and a tool magazine with 60 stations. It is equipped with internal coolant supply as well as air cooling, and is controlled by a Heidenhain iTNC-530 for true 5-axis simultaneous milling. If you are seeking high-quality milling machines, consider the POSmill H 500 U that we are offering for sale. Please contact us for further details about this machine. Additional equipment Fedpfx Ajx D Niasagsfw • Optional chucks and approx. 260 HSK63 holders with rack available • CAD-CAM Hypermill OPEN MIND license for 5-axis simultaneous milling not included, but available for sale • Note: The Y-axis is louder than normal—we recommend replacing the Y-axis bearings. The machine is fully operational and remains in production. Machine Advantages Technical benefits of the machine: • 60-station tool magazine / internal cooling / internal coolant supply plus air cooling Additional information Spindle speed S = 18,000 rpm, HSK-A 63, Heidenhain—linear measurement system X, Y, Z / air purge for all linear measurement systems / active air-to-air electrical cabinet cooling / active cooling for the 4th and 5th axes, controlled / network & USB interface / controlled spindle cooling / Heidenhain iTNC 530 panel, right side / Heidenhain rotary encoder system / POS kinematics module incl. reference sphere / POS contour lock / automatic crane loading hatch / external hinged belt chip conveyor / coolant pump at head via M functions / chip flushing pump / chip rinsing unit / water gun / machine status light / air at the spindle / electromechanical oil/coolant separator / automatic coolant level monitoring / three-media connection at table center / hydraulic power unit incl. M-function control / mobile electronic handwheel / variants included in special price / spindle through-blow / 60-fold HSK-A 63 tool changer / internal coolant supply 20 bar with belt filter system / Kessler rotary table diameter 500 mm / prepared for workpiece measurement / infrared workpiece measurement – 3D probe / tool measurement via BLUM laser / swiveling inspection window / POS DCM collision module

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 14.674 h, diameter sekrup: 45 mm, produsen pengendali: ENGEL, model controller: CC300 microcomputer, This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a compact two-platen design, a minimal footprint, and intelligent servo hydraulics for reduced energy consumption. The machine is equipped with a CC300 microcomputer control system, including a 21.5-inch full HD touchscreen, and an advanced material package suitable for thermoplastics up to 350°C. For further information about this injection moulding machine, please contact us. Additional Equipment • Mould heating: 32 control circuits, max. heating capacity 60 kW • Vacuum compressed air circuits: with venturi nozzle and pressure switch • Air solenoid valves: 2/2-way, R1/2 inch • Autoprotect injection monitoring: self-learning system for mould protection • Advanced material package: for thermoplastics up to 350°C, max. reinforcement level 30% Machine Advantages Qualitative Machine Benefits • High-precision and sensitive mould protection • Advanced control system with 21.5" full HD touchscreen and user authorization system Ffsdpfxjx Nr Tnj Aagjw Technical Machine Benefits • Clamping plate stroke: 1800 mm • Max. distance between clamping plates: 2650 mm • Mould installation height: min. 850 mm, max. 1740 mm • High operational safety due to robust platen guidance and precise platen parallelism • Energy efficient with reduced power consumption and intelligent servo-hydraulics (Engel ecodrive) • Multi-circuit hydraulics for simultaneous movements (ejector, core pull, nozzle) Additional Information Machine still under power

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), berat keseluruhan: 10.500 kg, tinggi total: 2.000 mm, This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications and offers robust performance and reliability. An ideal solution for efficiently handling a variety of woodworking tasks. Contact us for more information regarding this machine. Additional Equipment • Press (front press): pressing force 6 – 12 t, power consumption 52 kW • Compressed air consumption: 350 NL/min for milling machine, 500 NL/min for press • Extraction volume: 10,600 m³/h • The machine ensures fast transport cycles with precise alignment • Features a hydraulic pressing system for continuous jointing • Equipped with integrated dust extraction and collection system Machine Advantages Ffedpfx Aajyabawogjw Technical Advantages • Feeding & transport: conveyor belt with a speed of 75 m/min and power consumption of 11 kW / infeed station maximum feed rate: 120 m/min, power consumption 22 kW • Workpiece dimensions: length: 150 – 2,000 mm / width: 50 – 205 mm / height: 35 – 50 mm / final length: 3,000 – 00 mm • Milling machine: turbo milling combination with a power rating of 63 kW / milling spindle motor: 22 kW, 3,000 rpm / cutting motor: 55 kW, 2,880 rpm Dimensions Machine depth: 18,500 mm

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en Fjdpfeyaihpox Aagefw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 345 mm, jarak gerak sumbu Z: 462 mm, produsen pengendali: MAZATROL, model controller: Smooth G, jumlah sumbu: 2, en Ffsdpfx Aaoyalppogow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 60.159 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, This Krauss Maffei 500-4300 CX 3s injection moulding machine was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is suitable for high-quality injection moulding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Please contact us for further details. • Locking device • Mould weight: Moving side 3950 kg / Fixed side 5260 kg (total 7900 kg) • Min. mould diameter: 560 mm • Opening stroke: 1170 mm • Mould installation height: min 480 mm; max - • Max. platen distance: 1650 mm • Mounting platens (H × V): 1270 × 1200 mm • Tie-bar clearances: H 900 mm / V 800 mm • Centring ring diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / Controls • Core pull controls: 2 (moving platen) + 2 (fixed platen) • Shut-off nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12x USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. shot volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticising rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle orifice: 6 mm • Pump output / heating output: 90 kW / 44 kW • Other • Max. crane load: 10 tonnes Fedpfoyg Hz Hsx Aagsfw • 2K capability: no • Filter nozzle/granulator: no • This is a standard fully hydraulic two-platen clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment: • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 40.507 h, gaya punching: 22 t, jarak pergerakan sumbu X: 2.500 mm, berat keseluruhan: 11.050 kg, produsen pengendali: BOSCH, jumlah sumbu: 2, en Ffjdpfxoyn Dkze Aagow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 510 mm, tinggi total: 2.850 mm, berat keseluruhan: 6.000 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 22.000 W, berat alat: 20.000 g, jumlah sumbu: 3, translation_001 Fodpoyq E Imsfx Aagsfw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 51.135 h, gaya punching: 22 t, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.600 mm, berat keseluruhan: 13.800 kg, produsen pengendali: BOSCH, jumlah sumbu: 2, en Ffodpfxoyn Dd Ij Aagow

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 13.392 h, daya motor spindle: 13.000 W, kecepatan spindel (maks.): 6.000 rpm, produsen pengendali: SIEMENS, model controller: 840D with ShopTurn 3G, jumlah sumbu: 3, EN Ffedpfxex D Efwj Aagsw

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 525 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.000 kg, tinggi benda kerja (maks.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – In Excellent Technical and Visual Condition The machine has undergone comprehensive and professional refurbishment at our facility and is in very good condition both technically and visually. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as necessary, including, among others, ball rollers and drive spindles. This was followed by complete geometric measurement, alignment, and additional inspection using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely renewed. In addition, the machine received a complete new paint finish and presents itself in a very well-maintained visual condition. The generator and control system were cleaned and technically checked. The generator’s cooling unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing in accordance with OPS Ingersoll’s quality and inspection specifications. The machine is immediately ready for use and ideally suited for reliable production operation. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Fodpfxeyrqpfs Aagsfw Type: Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of Manufacture: 2009 Control System: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld – multifunctional hand control unit Manual EDM operation with Powertec Handheld High-speed jump max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up disc changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special Features: Linear measuring systems on all axes (Z-axis standard)