Beli Dapat Menekan bekas (78)

Kondisi: bekas, Screw Press REG-MAC for drying films and fibers, and for compacting foam materials (e.g. Styrofoam, EPS) Iodpoxgtd Hjfx Adqstn drive motor 55 kW

Kondisi: bekas, Tahun pembuatan: 1982, Press force 30 t Stroke 8 - 40 mm Strokes per minute 100 - 600 /min Upright width 330 mm Installation height (stroke + ram adjustment at top) 280 mm Lateral upright passage 300 mm Table area 540 x 470 mm Through-hole in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Material thickness - 3.0 mm Feed length - 60 mm Drive power 5.5 kW Weight 2.6 t Space requirements approx. 1.5 x 1.2 x 2.2 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feeder (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm As is, where is, WITHOUT being put into operation Isdsvuk Hrjpfx Adqstn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Tekanan 25 t Langkah 7 - 62 mm Jumlah langkah 120-600 langkah/menit Kebutuhan daya total 4 kW Berat mesin sekitar 2,5 t Itjdpfxjxiy Abs Adqen Dengan feeder penjepit RC 11 Dokumentasi tersedia. Mesin bekas dan komponen bekas lainnya (paket lengkap) dijual sesuai kondisi pada saat diperiksa, tanpa garansi dan tanggung jawab, bebas muat truk di gudang kami di Solingen.

Kondisi: baru, Tahun pembuatan: 2025, agri-machinery-szsz2 Itodpfx Ajxh Swujdqen

Kondisi: baru, Thread diameter M20 - M52 mm Infinitely adjustable speed: 38 / 136 rpm Working range: 320 - 1500 mm Motor power: 1.3 kW Weight: 42 kg Electric tapping machines for M20 - M52 threads, Angle adjustable. 11 quick-change chucks with slip clutch included. Settings adjustable via display: Variable speed, adjustable depth, material selection, choice of main rotation direction, thread selection. Optional: Iedpfjd Iinkox Adqjtn Clamping table with T-slots: 990x700x800 mm. Magnetic base. Images show an M16 machine.

Kondisi: bekas, darley-ehp80-3125-hu Isdpfewnhc Nox Adqotn

Kondisi: baru, Tahun pembuatan: 2025, Tekanan: 315 t Jarak antara tiang: 2800 mm Isdpfxjxcp Itj Adqjtn Langkah tetap: 35 mm Jumlah langkah: 100 - 250 langkah/menit Tinggi pemasangan (langkah + penyesuaian slide bagian atas): 560 mm Jalur samping antara tiang: 600 mm Ukuran meja: 2700 x 1200 mm Lubang tembus pada meja: 2450 x 450 mm Ukuran peluncur: 2700 x 800 mm Berat: 80,0 t Kebutuhan ruang (PxLxT): 5,1 x 2,65 x 5,25 m

Kondisi: bekas, Thread diameter M3 - M12 mm Speed infinitely variable 400 rpm Torque 25 Nm Air pressure 6 - 8 bar Working range radius 1000 mm Machine weight approx. 12 kg Demonstration machine! Ijdpfx Asfg U Smsdqjtn Pneumatically driven tapping machine for M3 - M12 threads, equipped with: - robust and flexible working arm - 6 quick-change chucks with slip clutch Documentation in English!! Optional: - Clamping table with T-slot clamping surface 900 x 600 mm

Kondisi: baru, Tahun pembuatan: 2025, Tekanan: 315 t Jarak antar tiang: 3800 mm Langkah tetap: 35 mm Jumlah langkah: 100 - 250 langkah/menit Tinggi pemasangan (langkah + penyesuaian ram di atas): 560 mm Bukaan samping antar tiang: 600 mm Ukuran meja: 3700 x 1200 mm Lubang tembus di meja: 3400 x 450 mm Ukuran ram: 3700 x 800 mm Berat: 110,0 t Kebutuhan ruang (PxLxT): 6,1 x 2,65 x 5,6 m Ijdpsxcp Imsfx Adqetn

Kondisi: baru, Thread diameter M10 - M33 mm Infinitely variable speed 35/115 rpm Torque 320 Nm Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine is equipped, among other features, with a pneumatic motor featuring a quick-change chuck and a robust, flexible working arm. The tapping arm can be mounted directly onto the worktable using the mounting flange and is immediately ready for operation, allowing for rapid changeover times. It is possible to bring the tap directly to the desired tapping hole without needing to position the component under the tap. Itsdpfofg U Slex Adqen The unit design includes an adjustable angle, allowing the quick-change chuck to be tilted so that horizontal tapping is also possible. Pneumatic tapping machines for M3 - M12 threads, with adjustable angle. 6 quick-change chucks with safety clutch included. Options: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm - Magnetic base.

Kondisi: bekas, Tahun pembuatan: 1995, Pressure: 100 t Stroke: 20 - 120 mm Strokes per minute: 40 - 240 /min Upright clearance: 1300 mm Installation height (stroke + ram adjustment at top): 670 mm Side frame opening: 400 mm Table surface: 1200 x 800 mm Table through opening: 900 x 200 mm Table height above floor level: 1150 mm Ram area: 1130 x 650 mm Ram adjustment: 80 mm Material width: 250 mm Iodpfowc U Nlex Adqstn Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1 - 9999.9 mm Drive power: 22.0 kW Weight: 16.0 t Space requirement (W x D x H): 3.7 x 2.5 x 3.7 m Height above floor: 3.7 m Approved for automatic operation according to CE standard with infinitely variable drive (PIV gearbox), pneumatic clutch/brake combination (Ortlinghaus), electronic press force monitoring (dual-channel), automatic stroke adjustment, motorized ram adjustment, pneumatic ram weight compensation, motorized oil circulation lubrication Electronic roller feed, manufacturer: Kaiser, model: KWV 250

Kondisi: baru, Thread diameter M5 - M16 mm Infinitely variable speed 250 rpm Torque 48 Nm Air pressure 6 – 8 bar Working range 150 – 1900 mm The pneumatically powered D-JSC tapping arm features, among other things, a compressed air motor with quick-change chuck and a robust, flexible working arm. The tapping arm can be mounted directly onto the workbench using the mounting flange and is ready for immediate use. This ensures quick changeover times. The tap can easily be aligned to the desired hole without having to position the workpiece underneath the tapping head. Design with adjustable angle—the quick-change chuck can be tilted, enabling horizontal tapping operations. Pneumatic tapping machines for M5 – M16 threads, adjustable angle. Supplied with 6 quick-change chucks with slip clutch. Optional accessories: Itedpefg U Siofx Adqsn - Clamping table with T-slots: 750x600x650 mm or 990x700x800 mm - Magnetic base.

Kondisi: bekas, Tahun pembuatan: 1997, de2hu-001 Itjdsvuugcopfx Adqon

Kondisi: baru, Thread diameter M3 - M8 mm Electric tapping machines for M3 - M8 threads, Adjustable angle. 5 quick-change chucks with slip clutch included. Via display adjustable: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: - Clamping table with T-slots: 990x700x800mm. - Magnetic base. Iedpfx Adsfg U Snjqotn

Kondisi: bekas, Tahun pembuatan: 1990, Pressure 32 t Clearance between uprights 680 / 550 mm Iodsvuuf Sjpfx Adqetn Stroke 8 - 50 mm Strokes per minute 85 - 500 spm Installation height (stroke + slide adjustment at top) 300 mm Lateral opening between uprights 250 mm Table surface 620 x 450 mm Through-hole in table 450 x 110 mm Table height above floor 915 mm Ram surface 560 x 350 mm Drive power 7.5 kW Machine weight approx. 5.60 t Space requirements approx. 3.6 x 1.65 x 2.8 m Ram adjustment 50 mm Approved for automatic operation according to German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch, pneumatic ram weight compensation, mechanical gripper feed (ZR 18 D) Can be offered as-is, either in working or non-working condition

Kondisi: baru, Thread diameter M3 - M16 mm Continuously variable speed up to 187 rpm Working range 180 - 2000 mm Itjdpfxjfg U Sqe Adqjn Motor power 0.7 kW Electric tapping machines for threads M3 - M16, Adjustable angle. 9 quick-change chucks with slip clutch. Settings via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: Clamping table with T-slots: 990x700x800 mm. Magnetic base. Also available for: M14 to M24 and M27 to M33.

Kondisi: bekas, Tahun pembuatan: 1994, Pressure: 250 t Distance between uprights: 1650 / 1400 mm Fixed stroke: 150 mm Stroke rate: 30 - 75 strokes/min Shut height (stroke + ram adjustment at top): 665 mm Side upright opening: 550 mm Table surface: 1600 x 900 mm Passage opening in table: 1000 x 300 mm Table height above floor: 980 mm Ram surface: 1400 x 900 mm Drive power: 42.0 kW Machine weight: approx. 33.00 t Space requirement: approx. 2.8 x 2.5 x 4.4 m Approved for automatic operation according to German accident prevention regulations (UVV) Itedpfx Adovuucweqsn with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic ram weight compensation, FIXED stroke, motorized ram adjustment, motorized central lubrication Electronic roller feeder (Normatic, AESL 500-2.8) with motor (Indramat), motorized lateral band guide, motorized height adjustment Tool change system Distance table - ram without tool change system approx. 765 mm Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: baru, Screw thread diameter: M3 – M12 mm Infinitely variable speed: 400 rpm Torque: 28 Nm Air pressure: 6 – 8 bar Working range: 150 – 1900 mm Machine weight: approx. 12 kg The pneumatically driven D-JSC tapping machine features, among other things, a pneumatic motor with quick-change chuck and a robust yet flexible working arm. Ijdpfx Asd Iinusdqstn The tapping arm can be mounted directly onto the workbench using the mounting flange and is ready for operation immediately, ensuring minimal changeover times. It is possible to easily bring the tap to the desired borehole without having to position the workpiece under the tapping unit. This version is equipped with an adjustable angle, allowing the quick-change chuck to be tilted, which also makes horizontal tapping possible. Pneumatic tapping machines for threads M3 – M12, angle adjustable. 6 quick-change chucks with slip clutch included. Optional accessories: - Clamping table with T-slots: 750x600x650 mm or 990x700x800 mm - Magnetic base.

Kondisi: bekas, Tahun pembuatan: 1996, Pressing force 130 t Distance between uprights 1220/1070 mm Stroke 22 - 96 mm Strokes per minute 20 - 120 spm Die height (stroke + ram adjustment at top) 518 mm Lateral gap between uprights 600 mm Iedpfjvuubyjx Adqetn Table area 1220 x 880 mm Through-hole in table 450 x 250 mm Table height above floor 950 mm Ram area 1180 x 800 mm Drive power 22.0 kW Machine weight approx. 17.50 t Space requirement approx. 3.7 x 1.75 x 3.55 m Ram adjustment 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, automatic stroke adjustment, 8-way roller guide, electronic roller feed with hydraulic intermediate ventilation (Hensel, EVX 500)

Kondisi: baru, Thread diameter: 12 mm Infinitely variable speed: 375 rpm Itedpfx Adefg U Spoqon Working range: 180 - 1000 mm Motor power: 0.7 kW Electric tapping machines for M3 - M12 threads, with adjustable angle. Includes 7 quick-change chucks with slip clutch. Adjustable via display: - Variable speed - Adjustable depth - Material selection - Choice of main rotation direction - Thread selection Optional: Clamping table with T-slots: 990x700x800 mm. Magnetic base. Also available for M14 to M24 and M27 to M33 threads.

Kondisi: bekas, Tahun pembuatan: 1976, Pressing force 200 t Clear width between uprights 1,550 mm Stroke 30 - 160 mm Stroke rate 30 - 90 strokes/min Shut height (Stroke + slide adjustment, up) 745 mm Itsdevuubaopfx Adqon Side frame opening 800 mm Table area 1,500 x 1,150 mm Pass-through opening in table 450 mm Table height above floor 810 mm Slide area 1,500 x 1,000 mm Drive power 38.0 kW Machine weight approx. 26.5 t Space requirement approx. 5.1 x 1.6 x 3.7 m Slide adjustment 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) Features: - Infinitely variable drive - Pneumatic clutch/brake combination (Ortlinghaus) - Hydraulic overload protection in the slide - Pneumatic slide weight compensation - Motorized slide adjustment Can be offered either without commissioning, or alternatively with new Siemens S7-1500 F control.

Kondisi: baru, Thread diameter M6 - M30 mm Infinitely variable speed 58 - 205 rpm Working range 320 - 1500 mm Motor power 0.85 kW Weight 36 kg Electric tapping machines for threads M6 - M30, Adjustable angle. 11 quick-change chucks with safety clutch included. Adjustable via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Ijdpfx Adsd Iinlsqjtn Optional: Clamping table with T-slots: 990x700x800 mm. Magnetic base. Images show an M16 machine.

Kondisi: baru, Thread diameter: M3 – M16 mm Infinitely variable speed, max. 187 rpm Working range: 180 – 1000 mm Motor power: 0.7 kW Weight: 22 kg Electric tapping machines for threads M3 – M16, adjustable angle. Isdpfx Aded Iinmoqetn Includes 9 quick-change chucks with slip clutch. Settings via display: - Variable speed - Adjustable depth - Material selection - Selection of main rotation direction - Thread selection Options: - Clamping table with T-slots: 990 x 700 x 800 mm - Magnetic base. Also available for: M14 to M24 and M27 to M33.

Kondisi: baru, Thread diameter 12 mm Infinitely variable speed 375 rpm Working range 180 - 2000 mm Motor power 0.7 kW Itodjd Iinnjpfx Adqon Weight 28 kg Electric tapping machines for M3 - M12 threads, angle adjustable. With a working range of 180 - 2000 mm. 7 pcs. quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, choice of main rotation direction, thread selection.

Kondisi: baru, Thread diameter M6 - M22 mm Infinitely variable speed 60/200 rpm Torque 105 Nm Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine features, among other things, a compressed air motor with quick-change chuck and a robust yet flexible working arm. The tapping arm can be mounted directly onto the worktable via the mounting flange and is immediately ready for use, ensuring quick changeover times. Itodpsfg U Skefx Adqjn Thread taps can be easily brought to the required hole location without needing to position the workpiece underneath the tapping machine. The unit features an adjustable angle design, allowing the quick-change chuck to be tilted so that horizontal tapping is also possible. Pneumatic tapping machines for M3 - M12 threads, angle adjustable. Includes 6 quick-change chucks with slip clutch. Optional accessories: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - Magnetic base.