Beli Veb Wema Zeulenroda bekas (17)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, daya: 17 kW (23,11 hp), jenis arus masuk: tiga fasa, gaya penekanan: 160 t, panjang langkah: 500 mm, kecepatan operasi: 200 mm/dtk, kecepatan mundur: 125 mm/dtk, lebar meja: 900 mm, panjang meja: 630 mm, kedalaman tenggorokan: 800 mm, lebar pelat tuas: 700 mm, panjang pelat penekan: 450 mm, kapasitas tangki oli: 500 l, panjang total: 22.000 mm, lebar total: 12.500 mm, tinggi total: 34.500 mm, berat keseluruhan: 7.000 kg, tekanan kerja: 160 batang, tinggi pemasangan: 800 mm, tekanan: 250 batang, Press hidrolik PYE 160 S/1M. Tahun produksi 1984. Produsen VEB Wema Zeulenroda (Jerman). Mesin telah menjalani pemeriksaan menyeluruh. Spesifikasi: Gaya tekan maksimum 160 ton. Tekanan kerja 16 MPa. Meja atas 700 x 450 mm. Meja bawah 900 x 630 mm. Celah bebas 800 mm. Langkah silinder 500 mm. Kecepatan turun 200 mm/dtk. Kecepatan naik 125 mm/dtk. Kebutuhan daya 17 kW. Kapasitas oli dalam tangki 500 l. Berat 7000 kg. Tinggi 3450 mm, panjang 2200 mm, lebar 1250 mm. Mesin dalam kondisi sangat baik. Dapat dilakukan inspeksi dan pengujian mesin saat beroperasi. Gsdpfeqy E I Rox Alkobl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 250 t, panjang langkah: 500 mm, kecepatan operasi: 200 mm/dtk, kecepatan mundur: 110 mm/dtk, lebar meja: 900 mm, panjang meja: 630 mm, kedalaman tenggorokan: 800 mm, lebar pelat tuas: 750 mm, panjang pelat penekan: 450 mm, kapasitas tangki oli: 500 l, panjang total: 2.200 mm, lebar total: 1.250 mm, tinggi total: 3.700 mm, berat keseluruhan: 8.000 kg, Presa hidrolik PYE 250 SS. Produsen: WMW VEB Zeulenroda (Jerman). Tahun: 1985. Spesifikasi: Gaya penekanan maksimum 250 ton. Tekanan kerja 18,6 MPa. Meja atas 750x450 mm. Meja bawah 900x630 mm. Ruang bebas 800 mm. Langkah silinder 500 mm. Kecepatan ke bawah 200 mm/detik. Kecepatan ke atas 220 mm/detik. Daya yang dibutuhkan 24 kW. Berat 8.500 kg. Tinggi 3680 mm, panjang 2200 mm, lebar 1250 mm. Kondisi teknis mesin sangat baik. Mesin telah menjalani overhaul penuh. Gjdpfx Asvcb Tljlkjbl

Kondisi: belum diuji (bekas), Mesin kombinasi pemotong dan pelipat, panjang pelipatan 6000 mm Gbodpsy Rfpfefx Alkjl

Kondisi: bekas, Tahun pembuatan: 2009, Internal grinding diameter max. 600 mm External grinding diameter max. 800 mm Control: Siemens Sinumerik 840 D Maximum internal grinding depth: 800 mm Maximum external grinding length: 600 mm Speed range – stepless: 1–795 rpm Maximum workpiece length: 800 mm Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1-axis): -0.5°/+12° - Workpiece spindle drive power: 8.5 kW - Speed range (steplessly adjustable): 1–795 rpm - Setup speed (jog mode): 10 rpm - Spindle nose size A 8 to DIN 55026 - Through bore: 58.5 mm - Maximum workpiece diameter: 830 mm - Maximum workpiece length (unsupported): 800 mm - Maximum workpiece length (supported between centers): 800 mm - Maximum headstock load: 6100 N Internal grinding unit (Z1/X1/B2): - Travel (Z1-axis): 1100 mm - Travel (X1-axis): 150 mm - Swivel angle (B2-axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Internal grinding spindle drive power (steplessly adjustable) Belt-driven grinding spindles: 7.5 kW - Mounting hole for grinding head (diameter): 100 mm / 125 mm - Mounting length for grinding head: 220 mm - Grinding diameter: max. 600 mm - Grinding depth: max. 800 mm External and face grinding unit (Z2/X2): - Travel (Z2-axis): 800 mm - Travel (X2-axis): 470 mm - Swivel angle (B2-axis): 270° - External grinding spindle drive power: 7.5 kW - Mounting hole for grinding head: Ø 140 mm - Grinding diameter: max. 800 mm - Grinding length max.: 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Equipment/Accessories: - Various grinding spindles - Various flanges / grinding wheel mounts - Various chuck jaws Godpfxjwp S Tns Alksbl - Coolant system - Oil mist filter - Cooler - Technical documentation

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Singulation system for small-diameter timber and stakes for RH milling machines or other applications. Gbsdpowqdc Refx Alkjl Consisting of: inclined infeed with retaining hooks. Disc singulation / cascade with 3 singulation stages. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Singulation system for small-diameter timber and stakes for RH milling machines or other applications. Consisting of: inclined infeed with retaining hooks. Disc singulation / cascade with 3 singulation stages. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Gbjdpfxjwqf S He Alkol Ready for demonstration.

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 053-497, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, CNC machining center Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Model: HPC FLEX-V100 (special-purpose machine) Year of manufacture: 2005 Serial number: 053-497 CNC special-purpose machine model HPC FLEX-V100 by Werkzeugmaschinenfabrik Vogtland. The system is configured as a single-spindle machining module with horizontal/vertical machining capability and an automatic pallet changer. It has been specifically designed for processing bearing cages. The machining unit is based on a combination of two NC rotary tables (A and B axis), allowing for various machining positions and indexing angles. Using this 2-axis combination, a pallet with a clamping device is swiveled from the loading position to the machining position. Loading is performed via an automatic pallet changer with a separate pallet infeed station. Direct loading within the machining area is not structurally intended. The machine is equipped with comprehensive peripheral systems, including a coolant system with a high-pressure unit, chip conveyor, hydraulic power pack, water chiller, central lubrication, and oil and emulsion mist extraction. Machine control is via Siemens SINUMERIK 840D. Used industrial special-purpose machine from a production environment. The unit is fully assembled and equipped with extensive peripherals. Visually, it shows age- and operation-appropriate wear in the working area. Machine inspection possible by appointment. Dismantling, loading, and transport to be done by the buyer. Machine specifications • Installation dimensions (L × W × H): approx. 14,900 × 8,100 × 4,800 mm • Total weight: approx. 85 t • Maximum transport unit: approx. 18 t • Number of machining stations: 1 • Machine capacity: approx. 1 workpiece/hour (depending on type) Machining • Workpieces: various bearing cages • Material: CuZn40Pb2 (brass alloy) • Operations: drilling, tapping, milling, facing, brushing Workpiece clamping • Manufacturer: RAKO GmbH • Design: 12-jaw chuck • Operation: manual with power tool • Pallet size: 1250 × 1250 mm Control and drives • CNC control: Siemens SINUMERIK 840D • System control: Siemens S7 • NC axis drives: Siemens 1FT6 • Main spindle: KESSLER DMS132.AL.4.FFS • Drive controller: Siemens SIMODRIVE 611D Electrical data • Operating voltage: 400 V • Frequency: 50 Hz • Rated current: 300 A • Connected load: 150 kW • Control voltage: 24 V DC Hydraulic system • Manufacturer: Parker Hannifin GmbH • Hydraulic oil: HLP 46 Gjdpfx Asyt I I Ujlkjbl • Tank capacity: 90 l • Maximum pressure: 130 bar Pneumatics • Operating pressure: 6 ± 0.6 bar • Air consumption: approx. 300 m³/h Central lubrication • Manufacturer: Willy Vogel AG • Type: MFE5-KW6-S1+299 • Lubricant: CGLP 220 • Lubrication interval: every 10 min • Tank volume: 6 l Coolant system • Manufacturer: MANN + HUMMEL • Filtration system: K90 L T63-PF750D-T-ND-SSP • Pump capacity: 500 l/min at 4.4 bar (10 µm filter) High-pressure system • Manufacturer: MANN + HUMMEL • High pressure: 80 bar • Pump capacity: 50 l/min • Pump: ALLWEILER Chip disposal • Scraper belt conveyor with pump unit • Pump capacity: 550 l/min at 1.3 bar Extraction system • Manufacturer: IFS Industriefilter GmbH • Type: IFM 2000 Chiller unit • Manufacturer: BKW GmbH • Type: WRK30-2KK2P • Cooling capacity: 8 kW Pallet changer • Manufacturer: Fördertechnik Mayer GmbH & Co. KG • Type: F.M. 2667-0

Kondisi: bekas, en001 Gbodpfsu Idvwsx Alksl

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000x850x2350 mm No. 2: LxWxH: 1250x650x2230 mm No. 3: LxWxH: 650x600x1700 mm No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT with 3 working stations equipped with 15 drilling and milling spindles For example: production of industrial fittings in larger quantities (see photo). Gsdpfxsu Idxfs Alkjbl Further technical details regarding the machine: - Workpiece carrier: workpiece holding drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holding fixture; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. spindle speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - Left side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - 1st thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 125 mm; spindle speed 35.5 - 900 rpm; reversible (right/left) - 2nd thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 80 mm; spindle speed 45 - 560 rpm; reversible (right/left) Equipment: - 2 hydraulic power units - Chip conveyor system - Band filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Hand-held control unit This machine is not connected. Sale as is! Subject to prior sale.

Kondisi: bekas, Technical details: Number of spindles: 15 units Gedpou Idv Defx Alkjbl Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: - No. 1 (LxWxH): 1000 x 850 x 2300 mm - No. 2 (LxWxH): 1250 x 850 x 2500 mm - No. 3 (LxWxH): 1000 x 850 x 2100 mm - No. 4 (LxWxH): 1000 x 500 x 2350 mm Required floor space (approx.) (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT featuring 3 working stations with 15 drilling and milling spindles For example, for the production of fittings in larger quantities Further technical data of the machine: - Workpiece carrier: Workpiece drum Ø 800mm for 8 workpiece clamping stations, indexing time 10 sec. - Drilling-milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. spindle speed 2240 rpm - Left: 3x drilling and milling spindles and drilling spindles, and 2x thread cutting spindles - Right: 2x drilling and milling spindles and 2x thread cutting spindles, and 1x U-axis, as well as radial 2x adjustable thread cutting spindles, 2x drilling and milling spindles (one adjustable), and 1x adjustable U-axis - 1st thread cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left - 2nd thread cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter from Filtertechnik Gera (fleece belt 430mm) - Control panel - Manual pushbutton Subject to prior sale.

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Approx. machine weight: 17.0 t Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m Machine dimensions: LxWxH: 2400x2800x2800 mm Control cabinet dimensions No. 1: LxWxH: 1000x850x2350 mm Control cabinet dimensions No. 2: LxWxH: 1250x650x2230 mm Control cabinet dimensions No. 3: LxWxH: 650x600x2300 mm Control cabinet dimensions No. 4: LxWxH: 1300x650x2350 mm TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles E.g. for series production of fittings in large quantities Further technical specifications of the machine: - Workpiece carrier: Workpiece holding drum Ø 800mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm - Left: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm, as well as 3x radial drilling and milling spindles, including 1x U-axis and 1x thread-cutting spindle - 1st thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left - 2nd thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power packs - Chip conveyor - Band filter by Filtertechnik Gera (nonwoven band 430mm) - Operator panel - Hand-held pushbutton controller Godsu Idxrepfx Alkjbl i.D.

Kondisi: bekas, Wema Probst profile milling machine Main motor: 11 kW Dismantled and ready for loading Gbsdpsc N N U Njfx Alkjl

Kondisi: baru, The VKM supplies spare parts for the entire range of VKM and Oswald machines, as well as selected Bezner-Oswald and Wema Probst machines, plus BÖGLI bandsaws and replacement knives manufactured to drawing for various woodworking machines. Some parts are available directly from stock. Below is a selection of the most frequently requested parts: Gsdpfx Aleg Rn Avoksbl Centering roller, bore 40mm €112.00/each Centering roller, bore 50mm €156.00/each Feed roller, bore 40mm €118.00/each Feed roller, bore 50mm €138.00/each Take-off roller, bore 40mm €102.00/each Feed roller, bore 50mm €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We would be pleased to provide you with a quotation including our commercial terms. Additional spare parts available on request.

Kondisi: baru, Tahun pembuatan: 2025, VKM supplies spare parts for VKM, the complete Oswald product range, and certain Bezner-Oswald and Wema Probst machines, as well as BÖGLI bandsaws and replacement knives manufactured to drawing specifications for various woodworking machines. Some items are available for immediate delivery from stock. Below are some of the most frequently requested parts: Gbsdpfx Alswagxmekjl Centering roller, 40 mm bore, €112.00/each Centering roller, 50 mm bore, €156.00/each Feed roller, 40 mm bore, €118.00/each Feed roller, 50 mm bore, €138.00/each Take-off roller, 40 mm bore, €102.00/each Feed roller, 50 mm bore, €126.00/each Bezner WP35 peeling disc, €3,920.00/each Oswald RM162 guide slide RM7072W, €302.00/each Oswald RM162 knife holder RM7066W, €215.00/each We would be pleased to provide a quotation including commercial terms. Additional spare parts available on request.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Wema Probst QF50 cross machining machine Cross milling machine for processing round timber, equipped with a swiveling table to set the milling angle. Gjdpowc Tdnjfx Alksbl 2x processing stations 1x cross milling unit 1x drilling unit

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Wema Probst RHM 250 II-H milling machine – NEW - Diameters from 100mm to 250mm - Electronic feed adjustment - 2 milling heads - Head 1: diameter 150–300mm - Head 2: diameter 100–250mm - Feed rate 6–34m/min Gbedpfjubbryox Alkel - Complete electrical cabinet and control panel

Tahun pembuatan: 2020, Kondisi: bekas, 3233 Horizontal Drilling Machine Wema Probst QBV 200 Used, year of manufacture 2020 The machine is in as-new condition, with fewer than 30 drilling operations performed. Designed for making transverse milling and drilling operations in round-milled or profiled timber. This machine allows for the production of form-fit connections in round timber with three-dimensional manual adjustment. Typical applications include corner joints for log houses, timber frame structures, or products in the "garden wood" sector such as fences, carports, planters, raised beds, safety barriers, etc. The horizontal drilling machine consists of a base frame with welded steel construction, a swiveling drilling device, gas spring-assisted drilling column, and an adjustment system for positioning the drilling column. The timber is clamped with two centering vices. With the special tool (circular saw), asymmetric or end-face machining can be carried out. Gsdpfx Aswt Abwelkjbl The machine also allows for drilling 90° holes of up to 120 mm diameter in timber using flat drills. Accessories: Collet chuck for 25 mm tool shank diameter, no tools included Timber diameter: 60 - 200 mm Adjustment range of the tool: - +/- 60° for 60 mm diameter - +/- 45° for 80–140 mm diameter - +/- 30° for 160–200 mm diameter Motor power: 2.2 kW Speed: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm (L x W x H) Weight approx. 380 kg Sale on behalf of customer, ex location near 46026 Valencia (Spain), without dismantling, transport, or installation included Dismantling, loading, and transport by us available as an option Subject to prior sale and errors in description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by prior appointment. Sale as is Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the sale is made on an “as seen and inspected” basis Pictures and videos serve as examples and do not represent the actual delivery scope Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery conditions: ex location