Beli Dapat Menekan Pneumatik bekas (3.496)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, gaya penekanan: 200 t, daya: 0,045 kW (0,06 hp),

Kondisi: hampir baru (bekas), NNP Pneumatischer Gitter-Schneider Edelstahl-Pneumatikschneider, ideal für Obst und Gemüse, mit fahrbarem Gestell Dusdohpqwhspfx Ahusr

Kondisi: bekas, OLEO-PNEUMATIC LATHE FOR SMALL PART TURNING LOCATELLI MODEL OMK 300 - USED - Control panel Dujdpfx Ahsrnq Risuor - Bar feeder - Maximum working length: 300 mm - Minimum/maximum working diameter: 8/80 mm - Working stations: * Automatic loading * Turning with 2 gouges (roughing + finishing) * 1st profiling knife * 2nd profiling knife * Discharge of finished part

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 1377, USED STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE COMPLIANT - Equipped with TIGERSTOP electronic positioning stop, 4000 mm - Infeed roller table, 4500 mm Dedpfx Ast U Izpjhusur - Outfeed roller table, 4500 mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (W) x 60 mm (H); 135 mm (H) x 280 mm (W) - Motor: 10 HP - 415 Volt - Serial No.: 1377 - Year: 2007

Kondisi: sangat baik (bekas), pamasol-5934-pneumatischer-beschicker Dujdsqazcyjpfx Ahujr

Kondisi: bekas, Tahun pembuatan: 1988, Pressure 200 t Stroke 30 - 160 mm Stroke rate 40 - 120 /min Upright gap 1500 / 1300 mm Installation height (stroke + ram adjustment at top) 860 mm Lateral column passage 600 x 530 mm Table area 1250 x 1250 mm Through-opening in table 550 x 300 mm Table height above floor 1000 mm Duedsvut S Dopfx Ahuor Ram area 1250 x 1000 mm Ram adjustment 125 mm Material width 30 - 500 mm Material thickness 0.5 - 3.0 mm Feed length 0 - 999.9 mm Drive power 50.0 kW Weight 34.00 t Space requirements approx. 4.0 x 1.7 x 5.2 m (LxWxH) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment.

Kondisi: bekas, Tahun pembuatan: 1978, Pressure 150 t Fixed stroke 80 mm Stroke rate 30 - 150 /min Upright spacing 930 mm Shut height (stroke + ram adjustment at top) 400 mm Lateral upright passage 650 mm Table surface 880x1300 / 1500x600 mm Through-hole in table 760 x 180 mm Table height above floor 1270 mm Ram surface 920x1000 / 1300x600 mm Weight 27.5 t Space requirement approx. 3.1 x 1.8 x 4.3 m (LxWxH) Djdpfx Ahsvut Ursuour Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram weight compensation, central lubrication WITHOUT feed As is, as seen, WITHOUT commissioning Price for commissioning (with new control system) upon request

Kondisi: bekas, Tahun pembuatan: 1996, Pressing force 130 t Distance between uprights 1220/1070 mm Stroke 22 - 96 mm Strokes per minute 20 - 120 spm Die height (stroke + ram adjustment at top) 518 mm Lateral gap between uprights 600 mm Table area 1220 x 880 mm Through-hole in table 450 x 250 mm Table height above floor 950 mm Ram area 1180 x 800 mm Drive power 22.0 kW Machine weight approx. 17.50 t Space requirement approx. 3.7 x 1.75 x 3.55 m Duodpfxsvuubyo Ahusr Ram adjustment 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, automatic stroke adjustment, 8-way roller guide, electronic roller feed with hydraulic intermediate ventilation (Hensel, EVX 500)

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force 50 t Frame gap 800 mm Stroke 4 - 60 mm Strokes per minute 30 - 300 spm Shut height (stroke + ram adjustment at top) 400 mm Side frame opening 350 mm Table area 780 x 640 mm Pass-through opening in table 690 x 140 mm Table height above floor 1150 mm Ram surface 800 x 460 mm Drive power 26.0 kW Machine weight approx. 9.00 t Space requirement approx. 2.4 x 1.7 x 2.9 m Ram adjustment 80 mm Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, automatic stroke adjustment, electronic roller feed (PBK, WV 65-DSM 300P, year 2007) Duedpjvut Hujfx Ahuor Can be offered in current condition, either without or with commissioning – video from seller prior to dismantling available

Kondisi: baru, Tahun pembuatan: 2025, Tekanan: 315 t Jarak antara tiang: 2800 mm Langkah tetap: 35 mm Jumlah langkah: 100 - 250 langkah/menit Dusdpfx Ahjxcp Itjuer Tinggi pemasangan (langkah + penyesuaian slide bagian atas): 560 mm Jalur samping antara tiang: 600 mm Ukuran meja: 2700 x 1200 mm Lubang tembus pada meja: 2450 x 450 mm Ukuran peluncur: 2700 x 800 mm Berat: 80,0 t Kebutuhan ruang (PxLxT): 5,1 x 2,65 x 5,25 m

Kondisi: baru, Tahun pembuatan: 2025, Tekanan: 315 t Jarak antar tiang: 3800 mm Langkah tetap: 35 mm Jumlah langkah: 100 - 250 langkah/menit Tinggi pemasangan (langkah + penyesuaian ram di atas): 560 mm Dsdpfoxcp Imox Ahujur Bukaan samping antar tiang: 600 mm Ukuran meja: 3700 x 1200 mm Lubang tembus di meja: 3400 x 450 mm Ukuran ram: 3700 x 800 mm Berat: 110,0 t Kebutuhan ruang (PxLxT): 6,1 x 2,65 x 5,6 m

Kondisi: baru, de-hu-it-lt-001 Duodpfx Ahod Ab Ndsuer

Kondisi: baru, de-hu-it-lt-001 Duedpfxod Ab Iqo Ahujr

Kondisi: sangat baik (bekas), pamasol-33200 Djdjqazqijpfx Ahuour

Kondisi: bekas, Pneumatic tilting roller table 1500x2000x900mm Pneumatically tiltable roller table, stand. Dodpsuglrzefx Ahuour Dimensions: 1500 x 2000 x 900 mm Height of the table when fully raised/open: 1850 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), gaya penekanan: 1 t, lebar meja: 200 mm, panjang meja: 230 mm, lebar total: 400 mm, tinggi total: 860 mm, berat keseluruhan: 105 kg, tekanan udara: 6 batang, FCP-C 10 kN pneumatic press, single unit for sale Manufacturer: FCP-C Pressing force: 1 t Dodpjv E Sazefx Ahusur Stroke: 75–100 mm Air pressure: 0.2–0.5 MPa Working height: 320 mm Two-hand operation Table size: 200 x 230 mm Shaft diameter: φ15H9 mm x depth: 35 mm Speed regulator Low-friction roller Rotary stop lever Height: 880 mm Length: 360 mm Width: 400 mm Weight: 105 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 2 t, lebar meja: 330 mm, panjang meja: 350 mm, kedalaman tenggorokan: 100 mm, tekanan udara: 6 batang, diameter silinder: 28 mm, Like-new HYUNDAE HP-2000 2t PNEUMATIC PRESS Manufacturer: HYUNDAE MACHINERY & ELECTRIC CO., LTD Model: HP-2000 Year of manufacture: 2021 Max. pressing force: 2t Working height: 300 mm Press table size: 350 x 330 mm Stroke length: 100 mm Cylinder diameter: 28 mm Mounted on a press stand Dodpfx Ahevbfbweusur Two-hand control Voltage: 110 V Air connection hose diameter: 12 mm

Tahun pembuatan: 2001, Kondisi: baik (bekas), Top-closing stapler with clamping anvils, suitable for coil staples. Designed for sealing filled folding cartons made of single or double-wall corrugated cardboard. Cost-effective closure of corrugated cartons by jointing and overlapping flaps using clamping anvils. Suitable for both single and double-wall corrugated board. Dujdjva Nq Hjpfx Ahusr Adjustable penetration depth tailored to the type of carton being processed. Ideally suited for use in packaging lines where high availability and performance must be ensured. • Housing made of hardened steel for long service life. • Clamping anvils return instantly: up to 20 staple cycles per minute. • 1,000 staples per coil: up to 10 times less frequent reloading compared to standard staplers. For convenient operation, use a balancer in combination with a swing arm system and suitable coiled hose. See > accessories. MEROLOCK pneumatic stapler • for CR 1/34 coil staples, 18 mm arm length, • with sound absorber, • with automatic return of the clamping anvil, • clamping anvils are specially hardened for extended service life.

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: BIAIR2, As-new Bilz air damping unit for coordinate measuring machines incl.: - 3 pieces BiAir 2-ED with 1800 kg load capacity per membrane - electronic level control was only used for a very short period of time Dodpfofn Ebijx Ahuour

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Bandwidth: up to 76 mm Feed length: up to 76 mm Strip thickness: 0.076 - 1.91 mm Duedpfx Ahsxaqvsuer Speed: up to 195 strokes/min at full feed length Feed force: 205 N with mechanical control valve or optionally as shown in the photo with solenoid valve (24V or 230V) Also available in: - Bandwidths from 38 to 400 mm - Feed lengths up to max. 300 mm - Strip thicknesses 0.05 to 3.18 mm

Kondisi: baru, Tahun pembuatan: 2025, Band width: max. 38 mm Dsdpfx Aj Ea U Hohuour Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Selectable with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Kondisi: bekas, Technical specifications: Maximum saw blade diameter: 600 mm Minimum saw blade diameter: 590 mm Saw spindle diameter: 30 mm Dusdpfjri Si Dox Ahusr Pneumatic saw feed Maximum cutting height: 210 mm Maximum saw blade protrusion width: 500 mm 2 pneumatic clamps Extraction port diameter: 155 mm Work table size: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Kondisi: baik (bekas), Z.V.B-Pneumatische-Hebebuehne-mit-Gurtfoerderer Dsdpovdpxlofx Ahujur

Kondisi: sangat baik (bekas), Pneumatic Screwdriver PT72 Dedpfx Ajfhqmbohusur 2000 Nm System Norbar Model 18033, PT72, RRP €4,985 Condition: Used. Shipping: Parcel up to 12 kg. You can find more items—new and used—in our shop! International shipping costs upon request!

Kondisi: baik (bekas), PL-001 Djdpfox Tqnrsx Ahuour