Beli Ddr bekas (51)

Kondisi: sangat baik (bekas), pl-hu-01 Hedpfxsyzum Io Al Iel

Kondisi: bekas, Technical Details: Band width: 80 mm Sheet thickness: 1.5 mm Hodpfx Alou Ic E Re Isl Number of rollers: 5 Total power requirement: 1.2 kW Approx. machine weight: 150 t Space requirement approx. LxWxH: 1.1 x 0.7 x 1.4 m Leveling rollers: - 2 upper rollers, 3 lower rollers - Material feed via two pneumatically controlled rollers - Pneumatic connections not installed In original condition.

Tahun pembuatan: 1977, Kondisi: baik (bekas), 2 units GDR emergency power generators Engine manufacturer: VEB SKL Magdeburg GDR Type: 8NVD26 A2 Year of manufacture: 1977 Continuous output: 294 kW Maximum output: 323 kW Displacement: 52.96 liters Compression ratio: 14 Speed: 750 rpm Specific fuel consumption: 224 g/kWh Fuel consumption over 8 hours: 640 liters Boost pressure ratio: 1.38 Charge air temperature after turbocharger: 60°C Hsdpfx Aloigyt Ho Iol Generator: Manufacturer: VEM Dessau Type: SSED 509-8a Voltage: 400 Volts Electrical output: 330 kVA Power factor: 0.8 Dimensions: Length 4,270 mm, Width 1,516 mm, Height 2,030 mm Total weight approx. 8,500 kg per unit !! For further information, please inquire by phone only !!!

Kondisi: sangat baik (bekas), For sale: DDR motor pump. - 800 l/min - 28 HP - Very good condition. Hsdpfx Aev Nrf Ejl Ijl

Kondisi: hampir baru (bekas), Lini untuk pembersihan dan pengeringan (pemanggangan) biji wijen, biji labu, biji kopi, dll. Mesin: kapasitas 15-30 t/jam filter siklon dengan pra-saringan dan agen descaling Hedpfx Aoyycukjl Ijl silo sekam pengering tempat tidur fluida pembersihan akhir biji menggunakan penyortir optik Storex Z+ Kondisi sempurna!

Kondisi: baik (bekas), Tahun pembuatan: 2020, Gear motor Hedpfx Alsv Uh S Es Isl - Nord Drivesystems - 0.75 kW - 4 rpm - Type SK 9043.1VF-80LP/4 - Year 2020 - Weight: 160 kg - Price listed per unit.

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran), 1 unit heavy-duty gear unit Manufacturer: NORD DRIVESYSTEMS Model: SK9082.1/52 1 unit, left-hand version Shaft diameter: 110 mm Shaft length: 210 mm Output torque (M/2): 12,000 Nm i = 123.13 Dimensions (horizontal position): Hsdpfx Aljh Igwho Ijl Length: 1200 mm Width (including shaft 210 mm): 600 mm Height: 600 mm Weight each: 620 kg Condition: Like new, only used for test run. Can be installed horizontally or vertically.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We are offering a highly productive 3D printer for industrial series production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling protocols and functional reports are available, confirming that the machine was operational before disassembly. All axes have been properly secured by professionals. The machine can be transported on a standard truck. Hsdpfx Aevu Syysl Isl TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser operating hours: Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring options included Filter unit Accessories: 2 build cylinders 3 dosing cylinders 1 used overflow container 1 new overflow container Manuals 4 new heat exchangers 2 new Easy Filters 3 NTRON SIL02 oxygen analyzers with new sensors 1 new oxygen sensor And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the containers is also in stock and can be offered as an option. Faster to premium 3D components The highly productive, semi-automated TruPrint 5000 3D printing system is your entry into industrial series production. With features such as optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are fully equipped for demanding, industrial applications. The machine quickly and reliably produces high-quality parts from various metallic materials—meeting rigorous quality standards in tool and mold making, for 3D printing on preform blanks, as well as in aerospace and medical technology. Optionally, the entire process chain can run under a protective gas atmosphere: sieving, printing, cooling, de-powdering. Combined with external component and powder management and TRUMPF monitoring solutions, it's ideal for industrial series additive manufacturing. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. Additively manufactured structures are applied to a preform blank. This innovative option is especially suitable for simple handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm: Ø 300 x H 400, Ø 290 x H 390 (reduced with preheating >200°C) Processable materials: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate [2] cm³/h: 5 - 180 Layer thickness [3] μm: 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W: 3 x 500 Laser spot diameter [3] μm: 100 - 500 Min. detectable oxygen content ppm: Up to

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We offer a high-productivity 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the following options: Zirox sensor, single laser, powder bed monitoring. Trumpf TruPrint 3000 incl. filter unit Hedpfx Ajvu Ticel Iel Serial number: S0721Q0022 Laser runtime: Laser beam on 17,508 hours The system was last used with aluminum AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling protocols and functional documentation are available, proving that the machine was operational prior to disassembly. All axes have been properly secured by specialists. The machine can be transported on a standard commercial truck. Accessories: - 4x dosing containers - 1x build cylinder - 1x overflow container - Various spare parts such as protective glass, etc. - Manuals The Armanni CAR.Elev. pallet truck for container replacement is also in stock and can optionally be included in the offer. Rapid production of high-quality 3D components D1. Machine Concept The TruPrint 3000 is a universal medium-format machine with external part and powder management for the industrial production of complex metallic components using 3D printing. Its large build volume offers high flexibility regarding the size, quantity, and geometry of the respective application. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials5: Weldable metals in powder form, such as stainless steels, tool steels, aluminium, nickel-base, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate6 cm³/h: 5 – 60 Layer thickness7 μm: 20 – 150 Laser source (TRUMPF fiber laser) W: 500 Beam diameter μm: 100 – 500 O₂ concentration ppm: 100 Exposure speed (powder bed) m/s: 3 Monitoring: Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C: 200 Shielding gas: Nitrogen, argon Power supply V / A / Hz: 400 – 32 – 50/60 Dimensions (incl. filter) mm: 3385 x 1435 x 2225 Weight (incl. filter) kg: 4300 Subject to change. The details provided in our quotation and order confirmation are decisive. Technical Data TruPrint 3000 Table 3

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.772 mm, tinggi total: 1.683 mm, lebar total: 2.027 mm, berat keseluruhan: 2.869 kg, en Hodpfx Aleytckqs Iol

Kondisi: bekas, Tahun pembuatan: 1992, The Elcos 2-head drilling machine is a 1992 unit manufactured by Elcos, featuring a format of 45 x 150 mm. It is currently stored in Germany and offers a drilling distance of 45 - 150 mm, with a clearance behind the drill heads of 100 mm. This is a double-head paper drilling machine operated by lever and runs on single-phase 240 volts. Delivery terms are FCA. Format: 45 x 150 mm Features: Double-head paper drill Hedpfx Alswvuube Iel Drilling distance: 45 - 150 mm Clearance behind drill heads: 100 mm Operation: Lever-actuated, single-phase 240 volts

Kondisi: sangat baik (bekas), konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 01/2022, panjang total: 13.860 mm, lebar total: 2.550 mm, tinggi total: 4.000 mm, suspensi: udara, ukuran ban: 385/65 R 22.5, jarak roda: 8.790 mm, warna: putih, Tahun pembuatan: 2022, Perlengkapan: ABS, tail lift,

Kondisi: bekas, jarak tempuh: 442.312 km, daya: 240 kW (326,31 hp), pendaftaran pertama: 12/2008, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 01/2027, warna: perak, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, lebar total: 2.550 mm, tinggi total: 3.700 mm, Perlengkapan: ABS, derek, pendingin udara, penggerak semua roda,

Kondisi: bekas, jarak tempuh: 442.312 km, daya: 240 kW (326,31 hp), pendaftaran pertama: 12/2008, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 01/2027, warna: perak, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, lebar total: 2.550 mm, tinggi total: 3.700 mm, Perlengkapan: ABS, derek, pendingin udara, penggerak semua roda,

Kondisi: bekas, jarak tempuh: 442.312 km, daya: 240 kW (326,31 hp), pendaftaran pertama: 12/2008, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 01/2027, warna: perak, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, lebar total: 2.550 mm, tinggi total: 3.700 mm, Perlengkapan: ABS, derek, pendingin udara, penggerak semua roda,

Tahun pembuatan: 2016, Kondisi: baru, nomor mesin/kendaraan: 435505660, Complete new winch for asphalt silo *NEW* Further information Hedpfxomwit Ts Al Iel Intended use: Construction, Applicable material: Asphalt,

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys J35 Pro 3D printers are immediately available. Each unit undergoes a comprehensive inspection according to strict guidelines, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and an economically attractive alternative to a new machine. The machines differ in year of manufacture, features, and printing hours. Details about condition as well as information on the price range are available upon request. The Stratasys J35 Pro is a compact industrial PolyJet multi-material 3D printer with a build area of 1,174 cm². This machine is suitable for lifelike design and functional prototypes as well as highly detailed models, and can process up to three materials simultaneously in a single print job. Hsdpjywvgzsfx Al Iel This allows for the combination of various material properties—such as rigid, transparent, flexible, or impact-resistant areas—within a single component. With a layer thickness of 18.75 µm and high dimensional accuracy, the J35 Pro delivers precise, repeatable print results with extremely fine details and smooth surfaces.

Kondisi: siap digunakan (bekas), * Model: Antriebs- und Umlenktrommeln * Nr. 1 Antriebstrommel: Trommellänge 750 mm - Trommel-Ø 650 mm - Achslänge 1370 mm - Achs-Ø 80/70 mm - mit Lagern * Nr. 2 Umlenktrommel: Trommellänge 750 mm - Trommel-Ø 500 mm - Achslänge 1150 mm - Achs-Ø 70 mm - mit Lagern Hsdpfx Alsywm Ebe Iel * Nr. 3 Antriebstrommel: Trommellänge 750 mm - Trommel-Ø 650 mm - Achslänge 1570 mm - Achs-Ø 125 mm - mit Lagern * Nr. 4 Umlenktrommel: Trommellänge 1150 mm - Trommel-Ø 520 mm - Achslänge 1550 mm - Achs-Ø 100 mm - mit Lagern * Nr. 5 Umlenktrommel: Trommellänge 950 mm - Trommel-Ø 630 mm - Achslänge 1290 mm - Achs-Ø 100 mm - mit Lagern * Nr. 6 Antriebstrommel: Trommellänge 750 mm - Trommel-Ø 650 mm - Achslänge 1370 mm - Achs-Ø 80/70 mm - mit Lagern * Nr. 7 Umlenktrommel: Trommellänge 1300 mm - Trommel-Ø 630 mm - Achslänge 1870 mm - Achs-Ø 160 mm - mit Lagern * Nr. 8 Umlenktrommel: Trommellänge 950 mm - Trommel-Ø 650 mm - Achslänge 1350 mm - Achs-Ø 110 mm - mit Lagern * Nr. 9 Umlenktrommel: Trommellänge 750 mm - Trommel-Ø 600 mm - Achslänge 1150 mm - Achs-Ø 110 mm - mit Lagern * Nr. 10 Umlenktrommel: Trommellänge 1150 mm - Trommel-Ø 520 mm - Achslänge 1610 mm - Achs-Ø 90 mm - mit Lagern * Nr. 11 Umlenktrommel: Trommellänge 1150 mm - Trommel-Ø 520 mm - Achslänge 1610 mm - Achs-Ø 90 mm - mit Lagern * Nr. 12 Umlenktrommel: Trommellänge 750 mm - Trommel-Ø 520 mm - Achslänge 1150 mm - Achs-Ø 90 mm - mit Lagern * Nr. 13 Umlenktrommel: Trommellänge 750 mm - Trommel-Ø 490 mm - Achslänge 1150 mm - Achs-Ø 90 mm * Nr. 14 Umlenktrommel: Trommellänge 750 mm - Trommel-Ø 490 mm - Achslänge 1150 mm - Achs-Ø 90 mm * Nr. 15 Umlenktrommel: Trommellänge 750 mm - Trommel-Ø 520 mm - Achslänge 1130 mm - Achs-Ø 70 mm - mit Lagern * Nr. 16 Umlenktrommel: Trommellänge 1100 mm - Trommel-Ø 650 mm - Achslänge 1700 mm - Achs-Ø 130 mm - mit Lagern * Nr. 17 Antriebstrommel: Trommellänge 750 mm - Trommel-Ø 650 mm - Achslänge 1750 mm - Achs-Ø 70 mm - mit Lagern * Nr. 18 Umlenktrommel: Trommellänge 950 mm - Trommel-Ø 630 mm - Achslänge 1470 mm - Achs-Ø 120 mm - mit Lagern * Nr. 19 Antriebstrommel: Trommellänge 950 mm - Trommel-Ø 670 mm - Achslänge 1720 mm - Achs-Ø 100 mm - mit Lagern * Nr. 20 Umlenktrommel: Trommellänge 1300 mm - Trommel-Ø 630 mm - Achslänge 1870 mm - Achs-Ø 160 mm - mit Lagern * Nr. 21 Umlenktrommel: Trommellänge 1150 mm - Trommel-Ø 600 mm - Achslänge 1650 mm - Achs-Ø 125 mm - mit Lagern * Nr. 22 Umlenktrommel: Trommellänge 1300 mm - Trommel-Ø 630 mm - Achslänge 1870 mm - Achs-Ø 160 mm - mit Lagern * Nr. 23 Umlenktrommel: Trommellänge 1150 mm - Trommel-Ø 600 mm - Achslänge 1650 mm - Achs-Ø 125 mm - mit Lagern * Nr. 24 Antriebstrommel: Trommellänge 950 mm - Trommel-Ø 540 mm - Achslänge 1900 mm - Achs-Ø 120 mm * Nr. 25 Umlenktrommel: Trommellänge 1150 mm - Trommel-Ø 500 mm - Achslänge 1550 mm - Achs-Ø 100 mm - mit Lagern * Nr. 26 Umlenktrommel: Trommellänge 1300 mm - Trommel-Ø 630 mm - Achslänge 1870 mm - Achs-Ø 160 mm - mit Lagern * Nr. 27 Umlenktrommel: Trommellänge 1300 mm - Trommel-Ø 630 mm - Achslänge 1870 mm - Achs-Ø 160 mm - mit Lagern * Nr. 28 Antriebstrommel: Trommellänge 750 mm - Trommel-Ø 650 mm - Achslänge 1580 mm - Achs-Ø 120 mm - mit Lagern * Nr. 29 Antriebstrommel: Trommellänge 750 mm - Trommel-Ø 530 mm - Achslänge 1290 mm - Achs-Ø 60 mm - mit Lagern * Nr. 30 Antriebstrommel: Trommellänge 750 mm - Trommel-Ø 660 mm - Achslänge 1360 mm - Achs-Ø 70 mm - mit Lagern.

Kondisi: siap digunakan (bekas), * Merek: FAM * Model: drum kepala (belum pernah dipakai) * Lebar sabuk: 2000 mm * Panjang roller: 2200 mm, Ø 830 mm * Termasuk: bantalan dan pelapis karet Hodjywl Uhspfx Al Iel

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, iAM Marketplace - the official used machinery partner of Stratasys! Several professionally refurbished Stratasys Fortus 450mc 3D printers are now immediately available. Each unit undergoes comprehensive inspection according to strict specifications, with all print-critical components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and an economically attractive alternative to purchasing new equipment. The machines differ in year of manufacture, configuration, generation, and number of print hours. Detailed information on condition and price range is available upon request. Hodpjyvz Smsfx Al Iol The Stratasys Fortus 450mc is an industrial FDM 3D printer offering a build volume of 406 x 355 x 406 mm. This machine is ideal for functional prototypes, production tools, end-use parts, and small batch manufacturing. It delivers outstanding dimensional accuracy, repeatable print results, and reliable performance for industrial applications. With its broad range of compatible materials—including high-performance and ESD-compatible materials—the Fortus 450mc is a versatile solution for a wide range of applications across manufacturing, aerospace, automotive, and general industry.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2004, Modul perpanjangan Koenig DR-RR 400 - untuk pembagi adonan Mini Rex 4000 - bekas - tahun pembuatan: 2004 - rentang berat: 20-135 g Hsdpfjyywdaox Al Isl - mesin setelah direkondisi - mesin tersedia sebelum rekondisi - pengambilan dari gudang / opsi pengiriman - harga atas permintaan

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys J850 3D printers are immediately available. Each machine undergoes comprehensive inspection according to strict guidelines, with a focus on all print-relevant components being refurbished and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to a new machine. The machines differ in year of manufacture, configuration, and print hours. Detailed information on condition as well as price range is available upon request. Hsdpfxoyu Racs Al Iol The Stratasys J850 Prime is an industrial PolyJet full-color 3D printer with a build envelope of 490 × 390 × 200 mm. The machine is ideal for realistic design and functional prototypes as well as sophisticated models, processing up to seven base resins simultaneously for multi-material parts in over 500,000 colors, including transparent and flexible sections. It is PANTONE validated and offers layer thicknesses down to 14 µm (55 µm in Super High-Speed mode) along with high dimensional accuracy for repeatable print results.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, nomor mesin/kendaraan: 153, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 100 h, de2hu-it-lt-001 Hsdpfx Ajylbi Aol Iel

Kondisi: baru, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, UNGENUTZTE TEMA INDUSTRIELLE TROCKNUNGSANLAGE – FLUIDBETTTROCKNER – KOMPLETTSYSTEM Eine vollständige „Industrielle Trocknungsanlage, hergestellt von TEMA Process B.V. (Niederlande)“ steht zum Verkauf. Das System basiert auf der Shaking Fluid Bed Dryer-Technologie und wurde ursprünglich für das Trocknen von industriellen Materialien wie Klärschlamm, Mineralien, chemischen Rohstoffen und anderen feuchtehaltigen Industrieprodukten konzipiert. Die Anlage wurde nie installiert oder in Betrieb genommen und befindet sich seit der Anlieferung im Lager. Betriebsstunden: 0 Es handelt sich nicht nur um einen Trockner, sondern um eine komplette industrielle Trocknungsanlage inklusive Förder-, Filter- und Steuerungstechnik. --- # Allgemeine Informationen Hersteller: TEMA Process B.V. (Niederlande) Systemtyp: Schüttel-Fluidbetttrockner / Kühler Baujahr: 2014 Zustand: Ungebraucht – Nie installiert – Seit Kauf eingelagert --- # Kapazität * Wasserverdampfungskapazität: ca. 2,1 t/h * Trocknergutzuführung: ca. 12.000 kg/h * Endproduktleistung: ca. 1.900 kg/h --- # Feuchtigkeitsbereich Eingangsfeuchte: 40 – 60 % Endfeuchte: 10 – 15 % --- # Trocknungssystem * Schüttel-Fluidbetttrockner mit integrierter Kühlerzone * Trocknungslufttemperatur: 120 – 250°C (nominal 190°C) * Direkt befeuerter Erdgas-Lufterhitzer * Trocknungsluftstrom: ~44.000 kg/h Hsdpfxoyrxwwo Al Iol --- # Trocknerabmessungen Fluidbettfläche: 8,4 m² Trocknergröße: 7,3 m x 1,15 m --- # Energieverbrauch Installierte elektrische Leistung: ~218 kW Elektrischer Verbrauch: ~160 kW Erdgasverbrauch: max. 190 Nm³/h --- # Lieferumfang (Komplettanlage) Die Anlage umfasst folgende Komponenten: Trocknungseinheit * Schüttel-Fluidbetttrockner / Kühler * Luftversorgungssystem * Direkt befeuerter Erdgas-Lufterhitzer * Umluftventilator * Verbrennungsluftventilator * Kühlluftventilator --- Staubabscheidung und Filtration 2 Zyklonabscheider 1 Schlauchfilter (Baghouse) Staubschleuse (Rotary Valve) Abluftventilator und Kanalsystem 4 Berstscheiben (Explosionsdruckentlastung) --- Materialfördersystem * Doppelschaft-Paddelmischer * Granulator * Schneckenförderer * Doppelschneckenförderer * Becherwerk * Produktförderstrecke --- Automatisierung und Steuerung * MCC / SPS-Steuerung * Siemens S7-300 SPS-Plattform * HMI-Bedienpanel * Oberleitsystem für SCADA-Anbindung vorbereitet --- # Typische Anwendungen Die Anlage ist einsetzbar zur Trocknung verschiedenster Industriegüter, u.a.: * Klär- und Industrieschlamm * Mineralien und Bergbauprodukte * Chemische Rohstoffe * Recyclingmaterialien * Papier- und Zellstoffrückstände * Düngemittel und organische Materialien * Biomasse und weitere industrielle Stoffe --- Zustand * Nie installiert * Nie in Betrieb genommen * Seit Lieferung eingelagert * Komplette Anlage vorhanden --- Standort Türkei Die Anlage kann vor Ort besichtigt werden. Weitere technische Unterlagen und Fotos sind für ernsthafte Interessenten verfügbar.

Kondisi: bekas, Tahun pembuatan: 2013, Venjakob Perfect Spray Coating Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped configuration with 180° transfer Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space for sanding machine (optional) 3. VEN SPRAY PERFECT automatic spray machine, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180° transfer station with nozzle dryer 7. Fresh air supply unit for transfer station, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters Hsdpfx Alsu Afu Re Isl 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge section, belt from UV dryer 13. Hall supply air unit, 30,000 m³/h Further information: On request