Beli Deckel Maho Fp 4 bekas (335)

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), 1 Bcjdpoyddyuefx Af Sju

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jam operasional: 37.300 h, Fungsionalitas: berfungsi sepenuhnya, Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: TNC Heidenhain Spindle speed range (main spindle): 20 – 9,000 rpm Drive power (main spindle): 9 / 13 kW Table size: 700 x 500 mm Tiltable B-axis: 105° (-10°/+95°) manual Rotatable: 360° manual Max. table load: 200 kg Number of T-slots: 7 Centering bore: 30H7 mm Number of tool pockets: 16 positions Bjdpfx Afswm Nqrj Socu Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total weight: 50 kg Rapid traverse rate max.: 10,000 mm/min Total connected load: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 32.966 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 426, tinggi total: 2.534 mm, berat keseluruhan: 3.000 kg, panjang produk (maks.): 1.783 mm, jumlah sumbu: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2001. It features a manual rotary table with a clamping surface of 700 x 500 mm and a maximum load capacity of 200 kg. The spindle speed reaches up to 9,000 rpm, and the machine is equipped with a tool changer offering 16 magazine positions. The machine dimensions are 1,783 x 1,647 x 2,534 mm with a weight of 3,000 kg. Consider the opportunity to acquire this DECKEL MAHO DMU 50 T vertical machining center. Please contact us for further information. • Rotation: 360° • Swivel: -10°/+95° • Spindle speed: 9,000 rpm • Power (100%/40% duty cycle): 9/13 kW • Tool holder: SK 40 DIN 69871 • Feed rate X, Y, Z: 10,000 mm/min • Rapid traverse X/Y/Z: 12 m/min • Manual rotary table with tilting axis • Clamping surface: 700 x 500 mm • Max. load: 200 kg • T-slot pitch/width: 63 mm / 14 H7 • Magazine positions: 16 • Max. tool length: 290 mm • Max. tool weight: 6 kg • Equipped with electronic handwheel Dimensions Bsdpfx Afjx Uqmds Socu Machine depth: 1,647 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 2.265 h, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 810D Powerline, tinggi total: 2.650 mm, beban meja: 600 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, en Bcjdpfx Afox D D Htj Sju

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 22.729 h, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, tinggi total: 2.650 mm, beban meja: 600 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, Pusat pemesinan vertikal 3-sumbu DMG DECKEL MAHO DMC 635V ini diproduksi pada tahun 2007. Mesin ini dilengkapi dengan probe pengukur dan probe 3D, sangat ideal untuk tugas pemesinan presisi. Jika Anda mencari mesin frais berkualitas tinggi, pertimbangkan DMG DECKEL MAHO DMC 635V yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. • Majalah alat: 20 stasiun • Ukuran meja: sekitar 790 × 560 mm Perlengkapan tambahan • Probe 3D • Pendingin: hanya suplai pendingin eksternal (tanpa pendingin internal/spindle berpendingin) Bcedpfx Ajx D Epcsf Sju • Konveyor serbuk: tidak termasuk Dimensi Kedalaman mesin: 2050 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 93.500 h, jarak pergerakan sumbu X: 1.180 mm, jarak lintasan sumbu Y: 710 mm, jarak gerak sumbu Z: 710 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 430, jumlah sumbu: 5, DECKEL MAHO DMC 100 T 5-sumbu ini diproduksi pada tahun 2003. Mesin ini memiliki lintasan sumbu X, Y, dan Z masing-masing 1.180 mm, 710 mm, dan 710 mm, majalah alat SK40 dengan 32 posisi, sistem pendingin internal, dan konveyor serbuk. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal DECKEL MAHO DMC 100 T ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Keunggulan Mesin Keunggulan Teknis Mesin • Pendingin internal • Konveyor serbuk Informasi Tambahan Mesin masih terhubung dengan listrik Spesifikasi Teknis Bodpsx T Dgnefx Af Sjcu Pendingin melalui spindle: Ya

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, berat keseluruhan: 3.600 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 9.000 W, jumlah sumbu: 5, This 5-axis vertical machining center, DMG DECKEL MAHO DMU 50, was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 rpm, and a rotary table with a clamping area of 630 x 500 mm. The machine has been thoroughly overhauled, including complete replacement of the X-axis bearings and installation of a new coolant pump. If you are looking for a high-quality milling machine, consider the DMG DECKEL MAHO DMU 50 we are offering for sale. Please contact us for further information. Additional Equipment • Tool positions: 16 / Max. tool weight: 6 kg / Max. tool length: 300 mm • Max. tool diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm • Total power requirement: 17 kVA • No chip conveyor included / No automatic probe included / No tools included Machine Advantages Qualitative Advantages • Low spindle hours and operating hours. • Never used in series production; operated carefully and in accordance with proper procedures. • Warm-up programs and maintenance routines for optimum performance. Technical Advantages • Torque: 57 / 82 Nm / Rapid traverse (X/Y/Z): 12 m/min / Feed rate: 10,000 mm/min • Table clamping area: 630 x 500 mm • Swivel range: -5 / +110° Bsdpfx Ajx E D U Asf Socu • Max. table load: 200 kg • T-slots: 14 h7 / T-slot spacing: 63 mm • C-axis rotation: +/- 360° • Complete overhaul of the X-axis bearings, including ball screw and bearing unit. / Various hydraulic components overhauled. / Tool changer readjusted and sensors replaced. • New door switch installed. / New glass panes fitted (some chips affecting them). / New coolant pump installed. / New strainer installed. / New handwheel HR410 installed. • The machine is a 5-axis model with a 3+2 configuration. Technical Specification Taper size SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 30.912 h, en Bedpfex D Hqzsx Af Secu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, jam operasional: 26.156 h, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: Siemens 840D, panjang benda kerja (maks.): 850 mm, diameter benda kerja (maks.): 630 mm, berat benda kerja (maks.): 500 kg, tinggi total: 3.100 mm, panjang total: 4.150 mm, kecepatan rotasi (min.): 1.200 rpm, kecepatan spindel (min.): 12.000 rpm, Year of manufacture: 2012 CNC control: Siemens 840D Axes X-axis travel (mm): 600 Y-axis travel (mm): 700 Z-axis travel (mm): 600 C-axis indexing (degrees): 360º (0.001° increments) B-axis indexing (degrees): -30º / 180º (0.001° increments) Feed rates (m/min): 60 Rapid traverse (m/min): 60 Axis acceleration (m/s²): 6/6/5 NC milling/turning table: Number of pallets: 2 Pallet dimensions (mm): Ø630 Max. workpiece size (D x H, mm): Ø630 x 850 Max. workpiece weight (kg): 500 Table rotation speed (rpm): 1200 Spindle Max. spindle speed (rpm): 12000 Spindle drive power (kW): 35/24 (40% duty cycle / continuous) Spindle torque (Nm): 111/77 Cooling Coolant supply through spindle (bar): 40 Tank capacity (litres): 980 Bodpoxuiibefx Af Socu Tool system Tool holder: HSK-A 63 Number of tools in magazine: 60 Tool changer type: Double gripper With free adjacent stations (mm): 120 With occupied adjacent stations (mm): 80 Max. tool length (mm): 450 Max. tool weight (kg): 15 Chip-to-chip time (sec.): 4 Equipment Electronic handwheel Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operating mode 4 Air blast through spindle center selectable via M-function NC rotary tilting table 3D quickSET MPC – Machine Protection Control Machine operating time: Power-on hours: 26,156 Spindle running hours: 16,472 Base machine: Dimensions / Weight Length (mm): 4,150 Height (mm): 3,100 Weight (kg): 10,000

Kondisi: bekas, Tahun pembuatan: 2004, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.100 mm, tinggi total: 4.375 mm, panjang total: 12.300 mm, lebar total: 11.200 mm, lebar meja: 1.400 mm, panjang meja: 1.600 mm, beban meja: 3.500 kg, Perlengkapan: dokumentasi / manual, Deckel Maho DMC-200 U Series 1512 5-Axis CNC Universal Machining Center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Bjdpsx Tulnofx Af Secu Maximum workpiece diameter x height: 1950x1100 mm X-axis travel: 1800 mm Y-axis travel: 2000 mm Z-axis travel: 1100 mm C-axis table rotation: 360° B-axis travel: -7 / 187° Spindle speed: 18,000 rpm Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58,000 kg If you have any questions regarding the machine or would like to schedule an inspection appointment, please feel free to contact us by phone or email.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, konveyor serpihan, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 control, EXCELLENT condition Technical Data: >> Year of manufacture: 2006 >> Manufacturer: Heidenhain, Model: iTNC 530 >> Travels: X 500 / Y 450 / Z 400 mm >> C-axis: 360 degrees >> B-axis: 0 degrees to 161.955 degrees Bsdpfx Afevyr Tdo Sjcu >> Tool holder: HSK A63 >> Max. spindle speed up to 18,000 rpm >> Feed rate steplessly programmable up to X, Y, Z 20,000 mm/min C/B-axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y/Z axis: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface: Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction system >> ICS (internal coolant supply) 40 bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air for measuring system >> Prepared for robotic loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following maintenance work has been carried out: >> Main work spindle completely overhauled >> Full maintenance: All coolant hoses and pneumatic hoses replaced, new filters, all fluids and belts renewed. Wipers and more. Thorough cleaning performed. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with TNC 530 3D path control from Heidenhain. The machine is in excellent condition. The main spindle has been overhauled (replacement spindle), fully serviced, and an inspection protocol is available. Take the opportunity to view and test the machine under power at our facility.

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 84.564 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 12 m/menit, pergeseran cepat sumbu Y: 12 m/menit, pergerakan cepat sumbu Z: 12 m/menit, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, daya nominal (semu): 17 kVA, produsen pengendali: iTNC 530 Heidenhain, model controller: iTNC 530 Heidenhain, tinggi total: 2.500 mm, panjang total: 3.000 mm, lebar total: 3.000 mm, lebar meja: 500 mm, panjang meja: 650 mm, beban meja: 200 kg, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 10.000 rpm, jam operasional spindle: 22.855 h, daya motor spindle: 13.000 W, jumlah slot dalam magazin alat: 16, panjang alat: 300 mm, diameter alat: 130 mm, berat alat: 6 g, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The machine is in well-maintained condition. Several components have recently been serviced or replaced. The following has been overhauled: - Complete X-axis bearing, including ball screw and bearing assembly - Various hydraulic components - Tool changer re-adjusted and sensor replaced - New door switch installed - New windows fitted (unfortunately already with some minor chip impact) - New coolant pump - New monitor, as the previous one was defective - New HR410 handwheel The machine has relatively few spindle and operating hours. It has never been used for serial production, and was always run with care and consideration—warm-up programs, etc. As we are a tool and mold making shop, the machine was mainly used for precise contours rather than heavy machining. I am only selling because I require a simultaneous machining center and larger travels. Technical data: Year of manufacture: 2005 X travel: 500 mm y travel: 450 mm z travel: 400 mm Control: Heidenhain iTNC 530 Main spindle Speed range (main spindle): 20 – 10,000 rpm Spindle drive power: 9 / 13 kW Torque: 57 / 82 Nm Tool interface: SK 40 Rotary table Clamping area: 630 x 500 mm Swivel range: -5 / +110 ° Max. table load: 200 kg T-slots: 14 H7 T-slot pitch: 63 mm C-axis: +/- 360 ° Feed rates: Rapid traverse (X / Y / Z): 12 m/min Feed rate: 10,000 mm/min Tool changer: Magazine places: 16 positions Max. tool weight: 6 kg Max. tool length: 300 mm Bsdpfx Aovtnm Hef Sjcu Max. tool diameter: 80 mm Max. tool diameter with adjacent pockets free: 130 mm Tool interface: SK 40 Total power requirement: 17 kVA Machine weight: approx. 3.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Universal Tool Milling Machine DECKEL MAHO – DMU 50 Please note: No chip conveyor and no automatic probe included! - 5 axes (3+2) - WITHOUT tools Photos of the machine attached. The machine was deliberately not cleaned before taking the pictures – it is shown in its current working condition and is used daily. The operating hours can be seen in the images. Kinematics and geometry are suitable for our requirements, but a geometry inspection could be considered. There have never been any crashes or collisions during our ownership.

Kondisi: bekas, Tahun pembuatan: 2012, translation Bodpsx S Rxnsfx Af Secu

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 73.090 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 350 mm, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, daya nominal (semu): 21 kVA, produsen pengendali: Siemens, model controller: 840D powerline, lebar meja: 380 mm, panjang meja: 500 mm, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 24.649 h, jumlah slot dalam magazin alat: 30, tegangan masuk: 400 V, jumlah sumbu: 5, Perlengkapan: konveyor serpihan, For sale is a machining center from the manufacturer Deckel Maho DMU 50 in well-maintained, technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and technically. It is fully functional, tested, and ready for immediate use. Further equipment: - Paper strip filter - Coolant system (KSS unit) With our all-inclusive package, we personally handle the complete service for you on request—from delivery to commissioning of your new machine. This includes unloading, installation, and alignment of the machining center. Our experienced service technicians then carry out professional commissioning, perform all necessary functional tests, and ensure that your machine operates reliably and precisely. We also offer customized training for your employees, so you can get the most out of the machine right from the start. Even after installation, we are happy to assist you—be it with maintenance, technical inquiries, or future upgrades. With our all-inclusive package, you do not have to worry about a thing—we ensure everything runs smoothly, allowing you to fully focus on your production. Optionally, you can also purchase extraction units, attachments, and accessories from us—in particular, we offer quality Donaldson extraction systems to help make your production even more efficient and cleaner. Our service promise: We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other manufacturers. We value personal consultation and support, even after your purchase. You are welcome to inspect and test the machine under power at any time in our facility. We cordially invite you to see the condition and functionality for yourself on site. With us, you are in the best hands—professional, reliable, and with a passion for machinery! PS CNC Service Germany GmbH & Co. KG Bcsdpfjxwtp Rsx Af Sju All information without guarantee.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Allgemeine Daten Maschinengewicht: 6.500 kg Steuerung Hersteller: SIEMENS Bcodpfx Asx R E Iusf Ssu Modell: Sinumerik 840D Hauptantrieb Drehzahlbereich der Spindel: 18.000 U/min Leistung des Spindelmotors: 35 kW Anzahl der Achsen: 3 Verfahrwege X-Achse: 560 mm Y-Achse: 560 mm Z-Achse: 510 mm Dieses 4-Achsen horizontale Bearbeitungszentrum DECKEL MAHO DMC 50 H wurde 2001 gebaut. Es eignet sich ideal für Präzisionsbearbeitung und überzeugt durch seine robuste Bauweise sowie zuverlässige Leistung. Für weitere Informationen zu dieser Maschine kontaktieren Sie uns bitte. Anwendungsbereiche Fräsen

Kondisi: siap digunakan (bekas), Technical Data – DECKEL MAHO CNC Machining Center General Information Manufacturer: DECKEL MAHO Machine Type: CNC Vertical Machining Center Axes: X / Y / Z (optionally with B and C axis, depending on configuration) Control: Heidenhain TNC 426/430PB Working Area: Travel X-axis: 710 mm Travel Y-axis: 520 mm Travel Z-axis: 520 mm Feed Drive Drives: AC servo motors Feed speed X/Y/Z: infinitely programmable up to 10,000 mm/min Rapid traverse X/Y/Z: 30 m/min Setup mode: 20 – 2,000 mm/min Input increment: 0.01 mm Position Measurement System Resolution X/Y/Z: 0.001 mm Position tolerance: with direct measuring system: 0.010 mm Main Spindle – Variant 1 (Standard) Max. speed: 12,000 rpm Drive: AC servo motor / motor spindle Motor output: 10.0 kW at 100% duty cycle 15.0 kW at 40% duty cycle Speed range: infinitely variable: 20 – 12,000 rpm Setup mode: 20 – 800 rpm Torque: available at spindle, efficiency taken into account (see power curve) Bcodpjxzvn Dofx Af Sju Main Spindle – Variant 2 (Option) Max. speed: 30,000 rpm Motor output: 15.0 kW at 100% duty cycle 20.0 kW at 40% duty cycle Speed range: infinitely variable: 20 – 30,000 rpm Setup mode: 20 – 800 rpm Power curve Power and torque diagrams available for: 12,000 rpm spindle 30,000 rpm spindle Rated for continuous operation (S1) and short-time duty (S6 – 40%) Spindle – Tool Interface SK version Tool interface: SK40 according to DIN 2079 Steep taper shank: DIN 69871 A Tool clamping: hydraulic / mechanical Pull stud: DIN 69872 Form A or ISO/DIS 7388/2 Type B HSK version Tool interface: HSK-E50 according to DIN 69893 Tool clamping: hydraulic / mechanical Tool Changer – SK Magazine positions: 24 (optionally 60) Max. tool length from spindle face: 315 mm Max. tool weight (automatic change): 6 kg Max. total weight in magazine: 80 kg (optionally 180 kg) Tool Changer – HSK Magazine positions: 24 (optionally 60) Max. tool diameter: 40 mm Max. tool length from spindle face: 150 mm Required compressed air: 5.5 – 8.0 bar Working Table Clamping surface (standard): 1,000 × 600 mm Permissible table load: 800 kg NC rotary table (optional): Clamping surface: Ø 700 × 500 mm Load capacity: 350 kg Weight & Transport Machine weight (standard): approx. 5,500 kg Max. installation weight (incl. workpiece, coolant, etc.): approx. 8,100 kg Transport weight: approx. 5,500 kg Transport dimensions (L × W × H): 2.75 × 2.02 × 2.73 m Media / Connection Values Compressed air: Minimum pressure: 5.5 bar Max.: 8.0 bar Ambient temperature: Operation: +15 to +35 °C Optimal: +20 to +25 °C Relative humidity: 20 – 75 % Noise level: < 80 dB(A)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Segera tersedia dari Swiss—divisi pembuatan alat: Mesin Frais 5 Sumbu Deckel Maho Tipe: DMU 35 M Tahun pembuatan: 2000 Kontrol CNC Heidenhain TNC 310 M Handwheel elektronik Meja: 400 x 280 mm Beban meja hingga 100 kg Pergerakan sumbu X/Y/Z: 350/240/340 mm Bjdpeyaydhjfx Af Socu Kecepatan spindle variabel: 0 – 5000 rpm Holder: SK 40 Pergerakan cepat: 5 m/menit Servomotor untuk sumbu X/Y/Z Rentang putar 360 derajat Penguncian meja plus 105/minus 150 derajat Berat: 2 ton Holder, ragum hidrolik Harga: 6.500 Euro + PPN ex lokasi

Kondisi: bekas, Tahun pembuatan: 2002, Merek: DECKEL-MAHO, Tipe: DMU100T, Tahun pembuatan: 2002, Sistem kontrol, Merek Heidenhain, Tipe iTNC 530, 5 sumbu (head swivel, meja putar NC), penukar alat 32 posisi, dudukan alat SK40, kecepatan spindle 10.000 rpm, konveyor serpihan, unit pendingin merek Schimpke, filter sabuk merek Interlith, tipe STB3/600HD, jam kerja tercatat 72.535; 28.209, pemantauan alat merek Brankamp, 4 lemari laci/kontainer, 1 lemari roll up WTS, isi: sekitar 150 dudukan alat SK 40, perlengkapan penjepit, alat ukur, tap ulir, bor center, 1 ragum HD merek Allmatic LC 160-200, probe pengukur inframerah (di penukar alat) +++ Perhatian: Mesin adalah bagian dari lelang online! +++ Bedpjx R Edvsfx Af Socu

Kondisi: bekas, Tahun pembuatan: 2007, Merek: DECKEL-MAHO, Tipe: DMU100P DuoBLOCK, Tahun Pembuatan: 2007, No. Seri: 11450001263, Kontrol, Prod. Heidenhain, Tipe iTNC530, 5 sumbu, Meja putar CNC, Perjalanan sumbu X/Y/Z 1.000 x 1.000 x 1.000 mm, dudukan alat SK 50, kecepatan spindle 12.000 rpm, pemantauan alat, Prod. Brankamp, penukar alat otomatis 60 posisi, konveyor serbuk, sistem filter sabuk, Prod. BMF, Tipe KA600, th. 2007, aksesori, jam operasional tercatat: 67.254; 24.704, 2 lemari rol WTS buatan Lista, 3 lemari laci lebar 1.000 mm, 6/8/9 laci tarik, isi: 100 dudukan alat SK 50 (alat lengkap), milling insert, bor, insert potong, perlengkapan penjepit, alat pengaturan, probe pengukur inframerah, alat bantu pemasangan alat. +++ Perhatian: Mesin ini merupakan bagian dari lelang online! +++ Bodpfx Afsx R Dwzo Sscu

Kondisi: bekas, Tahun pembuatan: 2007, dmc1035specs Bjdpfex R Em Rjx Af Sscu

Kondisi: bekas, Tahun pembuatan: 2011, tech-de-hu-001 Bodsx R Em Djpfx Af Socu

Kondisi: bekas, Tahun pembuatan: 2000, mkp01 Bcsdpfxsu Idffo Af Seu

Kondisi: bekas, Tahun pembuatan: 2001, en-GB:Technical Details: X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm C-axis: Table 360° B-axis: Spindle = right: 90° / left: 10° manual Control: Heidenhain TNC 430 MillPlusM Table size: 1000 x 600 mm Table load: 400 kg Tool holder: SK 40 Spindle speed: 20 – 12,000 rpm Feed rates stepless: X/Y/Z = 20 – 10,000 mm/min Tool magazine: 2 magazines Tool magazine with: 12 positions per magazine Spindle operating hours: 21,212 h Bodpfxsu Idgcs Af Secu Power-on hours: 49,845 h Total power requirement: 20.6 kW Approx. machine weight: 6.7 t Approx. machine dimensions (LxWxH): 3.0 x 2.0 x 2.15 m Equipment: - AC motors for X, Y, and Z axes - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - Stand-alone rotary table Ø 300 mm with hand control unit for tilting the B-axis table -10° / +95° and rotating the C-axis table 360° (not interpolable, selectable electrically via Nikken hand control unit) - Coolant system 8 m³/h (dimensions: L: 1.1 x W: 0.54 x H: 1.2 m) - Hand control unit - 24 tool positions, holders 1/6/7/18/21 broken! - Spindle can be swivelled manually from Y-axis from -10 degrees to 90 degrees - Rotary table “round table” separately programmable (external), tilting range manually 0-90 degrees, own control! As per description.

Kondisi: bekas, Tahun pembuatan: 2007, Technische Details_001 Bsdjw A I Uuepfx Af Sjcu

Kondisi: bekas, Tahun pembuatan: 1996, jam operasional: 8.900 h, Fungsionalitas: berfungsi sepenuhnya, Pusat pemesinan vertikal DMG Model: DMU 50 V Tahun: 1996 5 sumbu Gerakan memanjang: 500 mm Gerakan melintang: 380 mm Gerakan vertikal: 380 mm Spindel: BT 40 Kecepatan spindel: 8.000 RPM Jumlah alat dalam magazine: 24 buah Kontrol: Deckel Maho MillPlus Jam kerja spindel: 8.900 Antarmuka: RS-232 C Arbor pendek Bcsdpfxsyahh Ie Af Sju