Beli Dedusting bekas (187)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
iklan kecil
Bad Sooden-Allendorf
11.053 km
Deduster
SpänexSMU 1500
Hubungi
Kondisi: diremaj di bengkel (bekas), Rated power of the motor: 2.2 kW / 5.2 A
Rated voltage: 380 V / 50 Hz / 3~Ph
Rated air flow: 1,350 m³/h
Rated negative pressure: 2,850 Pa
Lsdpfx Adev Azcyeqsah
Main switch + start and stop
Manual filter cleaning
Extraction nozzle: 140 mm
1 container, diameter 800 mm
iklan kecil
Yerville
11.721 km
Turbin
LödigeLHC 170
Hubungi
Kondisi: bekas, Tahun pembuatan: 2001, nomor mesin/kendaraan: 14873, LODIGE Coating and Film Coating Turbine
Model: LHC170
Year: 2001
Partially perforated drum volume: 550 litres
Drum material: AISI 316, polished K240 grain
CIP (Clean-In-Place) system
Batch size: 165–550 kg
Included with the machine:
Lsdpfxowpwt He Adqsah
- Main turbine unit
- Air handling unit comprising:
- 2-stage filtration (F8 + H13)
- Pre-heating coil (steam)
- Dehumidification coil (chilled water)
- Main heating coil (steam)
- Supply air fan
- Cart with Watson Marlow 5-head spray pump
- Dust extractor
- Exhaust air filter
- Extraction fan
- Noise attenuator
- Electropneumatic control cabinets
- Siemens S7-300 PLC
- Operator panel
- PC with Lödige supervision software under WinCC
- Operator panel language: German and French
- CIP skid with Prominent dosing pump
- All necessary peripheral equipment:
- Charging chute
- Discharge chute
- Sight glass stopper
- 5 spray nozzles
- Flexible connecting hoses for the CIP skid
Dimensions: L3000 x W2300 x H2700 mm
Weight (turbine part): 3 tonnes
Complete documentation (French) including:
- P&ID
- Layout drawing
- Operator manual
- Technical datasheets
- Material certificates
- Etc.
Full program backup performed prior to decommissioning.
iklan kecil
Siedlce
10.199 km
Knalpot industri
CORMAKDCV4500E
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Trouble-free operation confirmed by our customers, who face demanding assignments on a daily basis.
Contaminants from the filter fall directly into a hermetically sealed bag, enabling fast unloading.
Designed primarily for filtering chips and very fine dust particles in the woodworking and furniture manufacturing industry.
Advantages
We guarantee cleaning quality!
Compact footprint, yet capable of extracting large quantities of dust and chips
Reliability confirmed by manufacturing facilities that handle demanding assignments every day
Robust, vibration-free, heat-treated design for maintenance-free machine operation!
Dynamically balanced metal impeller for noise reduction
200 mm diameter metal suction nozzle allows for significantly higher airflow!
Enables the construction of an overhead system for simultaneous operation of multiple machines with DCV E extractors
Large filter surface area!
Features specially designed blades for higher efficiency and performance, also contributing to energy savings
Highly airtight suction system for optimal air quality within the facility and, during the heating season, preventing heat loss
Quick change of foil containers, designed to ensure 99.99% system hermeticity
The DCV 4500E is another step forward in the production of efficient dust extractors, with consistent extraction parameters maintained throughout the entire operating cycle.
This type of extraction unit ensures excellent cleanliness at the workplace, directly impacting the quality of your products.
Perfectly compatible with machines such as sanders, panel saws, edgebanders, circular saws, and panel saws
The use of this extraction unit in an explosive atmosphere is strictly prohibited
This extractor is designed for woodworking industry use with sawdust, chips, and dust (not suitable for wet material, e.g., wet sawdust)
Polyester filter stops dust particles down to 5 microns. For smaller particles, use a filter such as HEPA
Technical Specifications
MOTOR POWER FOR CONTINUOUS OPERATION S1
3.0 kW / 400 V, 50 Hz
RPM
Lsdouc Uchopfx Adqoah
2900 rpm
EXTRACTION CAPACITY
4500 m3/h
SUCTION NOZZLE DIAMETER
200 mm
SUCTION VELOCITY
28-32 m/s
FILTER SURFACE AREA
170 x 1035 mm
FILTER MATERIAL
Polyester, 5 microns
NUMBER OF FILTERS
12
DIMENSIONS
1530 x 665 x 2200 mm
WEIGHT
120 kg
iklan kecil
Neckartailfingen
11.158 km
Baler dengan sistem ekstraksi debu
mütek
Hubungi
Tahun pembuatan: 2024, Kondisi: baru, Overview – Various Configuration Options
*Not all items may be required:
Optional:
- Bale Breaker MHB starting from €24,990 net
- Straw Mill MHZ starting from €7,980 net
- Special Hopper €970 net
- Cyclone from €3,750 net
- Sheet Metal Silo demonstration unit with discharge (only sketched in the picture)
*Optional, if feeding by wheel loader is desired
Unit price net from €14,750 – demo unit
- Dedusting Screw Conveyor – approx. 4 m length
Four screens are mounted underneath for suction extraction.
Net unit price from: €9,750
- Exhaust Components / Hoses flat rate €945 net
- Control System for Complete Plant
Net unit price: €2,750
- Demonstration Unit Extraction Device MMJET 160, with cleaning system
Connection: 160 mm
Fan 2.2 kW
Airflow: 1850 m³/400 V
Automatic compressed air cleaning
Net unit price from: €6,950
- Baling Press B 400
Lasdpeff Sbiofx Adqoh
Bale size approx. 400 x 400 x 800 mm (height adjustable)
Up to 30 bales per hour at ±20 kg
From €59,995 net
* A reference installation (baling press) is located at postal code: 64579 Gernsheim
Technical Data:
Bale size (WxDxH): 400 x 400 x 800 mm (height adjustable on request)
Bale weight ±20 kg (material-dependent)
Performance: approx. 30 bales per hour
Feed hopper capacity: approx. 0.7 m³
Min./max. level sensors in hopper
Hydraulic pre-compactor
Hydraulic pressing ram
Hydraulic unit, valve block with oil tank
Pump 18.5 kW / 50 liters
Rollers in pressing channel for easy bale ejection
Dimensions (L x W x H): 3105 x 2830 x 2455 mm
Weight: approx. 1,500 kg
mütek baling presses / packaging machines are designed for producing bales from a wide variety of materials such as shredded miscanthus or elephant grass, wood chips, sawdust, and chopped straw. These machines feature robust construction, ensuring consistent quality during continuous operation.
The baling press compacts material filled into the storage hopper by hydraulic pressure without the use of binding agents and packs the material into plastic bags. The material volume can be significantly reduced using the baling press. The volume reduction factor depends on the material. The maximum material moisture content must not exceed 18% ATRO.
The hopper of the mütek baling press can be loaded automatically or manually and has a capacity of approx. 0.7 m³. Hoppers with higher volumes or with integrated extraction and filter systems as complete disposal units are also available. In addition to automatic feeding by deduster, mütek offers feeding by screw conveyors. For both options, automatic dedusting is possible.
mütek baling presses are equipped with a control cabinet.
In standard version, bale dimensions are (WxDxH): 400 x 400 x 800 mm. Height can be adjusted to customer requirements on request.
Baling offers the following advantages:
- Simple and safe storage
- No loose dust
- Minimization of storage space
- Low transport volume
*Raw Material Requirements:
- Dry (max. 30% ATRO)
- Maximum length 35 mm
iklan kecil
Leipzig
10.887 km
Deduster
WINTERWIB-160
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Dimensions (length/width/height): 2000 x 800 x 2500 mm
Weight: 400 kg
Total power requirement: 2.2 kW
Dust extractor, complies with H3 standard WIB-160
- 2 chip bins with clamping brackets
- Residual dust content: 0.1 mg/m3
- On/off switch
Ljdpfxev A Hxys Adqoah
- Power consumption: 2.2 kW
- Mains voltage: 400 V / 50 Hz / 3-phase~
- Filter area: 10.2 m2
- 30 filter bags
- Automatic filter cleaning with shaking motor
- Dust bin volume: 2 x 70 l
- Suction nozzle: 160 mm
- Nominal air flow: 1900 m3/h
- Minimum air flow: 1400 m3/h
- Negative pressure: 2200 Pa
- Max. sound pressure level: 72 dB (A)
- Transport dimensions: L=2000 mm, W=800 mm, H=2500 mm
- Weight: 400 kg
Temukan lebih banyak mesin bekas
iklan kecil
Saerbeck
11.190 km
Laser cutting mesin
DURMAHD-FS 3015 Fiber
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 15 h, Manufacturer: DURMA
Model: HD-FS 3015 Fiber
Working Area X-Y-Z: 3100 x 1550 x 125 mm
Laser Power: 2000 watts
Control: Siemens Sinumerik 840D
Operating Hours: 15 h
Sheet Thickness - Mild Steel: 12 mm
Sheet Thickness - Stainless Steel: 6 mm
Sheet Thickness - Aluminium: 6 mm
Sheet Thickness - Brass: 6 mm
Sheet Thickness - Copper: 3 mm
Sheet Size: 3048 x 1524 mm
Load Capacity: 200 kg/m²
X-Y Axis Speed: 100 m/min
Simultaneous X-Y Axis Speed: 141 m/min
Positioning Accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Installation Area (L/W/H): approx. 10,000 x 7,000 x 2,300 mm
Weight: approx. 13,700 kg
Standard Equipment:
- Manual single table
- Sinumerik 840D control
- Manually focusing cutting head Precitec Procutter F125 focus
- Automatic sheet position and size measurement system
- Automatic nozzle cleaning
- Positioning laser diode
- Central lubrication system
- Chip conveyor
- Simple user interface parameter page (power-speed-pressure)
- External CAD/CAM programming software with auto-nesting, choice of Metalix or Lantek
- Work area lighting
- Warning beacon
- Multi-chamber extraction system
- Special laser cutting options
- Remote maintenance
- CE marking
Additional Equipment:
- IPG fiber laser source 2000 watt including chiller
- Filter, compact dedusting system Vanterm
Laedpfx Adedx Ewgeqjh
- Automatic pallet changer
- Automatic laser head positioning
- Cloud license
- Control cabinet air conditioning
The machine can be viewed and demonstrated at our showroom in Staufenberg by appointment at any time.
Further machines are available for demonstration at our premises in Staufenberg.
Further information available upon request.
iklan kecil
Bad Sooden-Allendorf
11.053 km
Deduster
ULMIA OTTAG 3
Hubungi
Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Nominal volumetric flow rate Vnom 750 m³/h, extraction nozzle D=100 mm, minimum volumetric flow rate Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz -
Ledev Azfzopfx Adqjah
iklan kecil
Jerman
10.992 km
Deduster
SchukoVacomat 2000
Hubungi
Kondisi: bekas, Tahun pembuatan: 1993, Used dust extractor
Year of manufacture: 1995
Motor: 2.2 kW
Extraction connection: 160 mm
Filter area: 20 m²
Lajdpfxovymgfe Adqeh
Nominal airflow: 1900 m³/h
With automatic pneumatic cleaning
Equipped with 2 filter cartridges and 2 dust collection bins
Height: 2500 mm
Length: 2200 mm
Availability: short-term
Location: Röllbach
iklan kecil
Lambsborn
11.273 km
Deduster
SpänexSMU R15
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Spänex mobile extraction unit SMU-R15
Year of manufacture: 2020, unused
140 mm Ø extraction nozzle, 1500 m³/h airflow
2100 Pa negative pressure, 65 dB, H3 tested
165 l container, dimensions: 1320 mm length, 750 mm width, 1905 mm height
Weight: 345 kg
Ljdpfx Adowanf Uoqoah
iklan kecil
Jettingen-Scheppach
11.076 km
Deduster
AL-KOPOWER UNIT 160 P
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, The POWER UNIT 160 P is a tested clean air dust extractor with a self-supporting sheet metal construction, made from powder-coated steel. The unit complies with the latest regulations and is certified with the BG–GS test mark according to GS-HO-07, and carries the H3 test mark for residual dust concentration. This means that extractors of this size can be installed directly in the workplace without requiring any additional fire or explosion protection measures.
Laodpfx Adsfydzbeqeh
The POWER UNIT 160 P is suitable both for individual extraction and as an extension to a stationary system.
This dust extractor is designed as a decentralized extraction solution for universal applications with a wide range of materials, such as wood and wood-based materials, paper, plastics, metals, stone, and more. Due to its compact dimensions, the unit can also be installed in workshops with limited space.
Your Advantages:
• Compact design
• Maximum reliability
• High extraction capacity
• Integrated pre-separator
• 100% air recirculation, residual dust content < 0.1 mg/m³
• Low noise emission
• Extended filter service life
• Easy emptying
• Supplied ready to plug in
• Optional with rotary valve or briquetting press
Technical Data:
• Inlet diameter: 160 mm
• Nominal motor power: 2.2 kW; 4.6 A, 3-phase; 400 V/50 Hz
• Max. airflow: 2,000 m³/h
• Airflow at inlet at 20/22 m/s: 1,448/1,592 m³/h
• Negative pressure at inlet at 20/22 m/s: 2,503/2,399 Pa (with loaded and cleaned filters)
• Filter surface: 9.1 m² (23 x Ø 125 mm, 1,000 mm long)
• Filter cleaning: Compressed air cleaning, AL-KO OPTI-JET®
• Filter material: Cat. M, antistatic, white, washable
• Filter load: 159 m³/(m² x h)
• Maximum sound pressure level: 71 dB(A) (free-field measurement according to DIN EN 11201, measured at 1 m distance)
• Chip collecting volume: approx. 165 (241) liters
• Electrical connections: 5 m connection cable with CEE plug
• 5-pin, 16 A with phase inverter
• Compressed air supply: ½” standard plug with maintenance unit (compressed air consumption: 108 Nl/min / 6 bar)
• Airflow monitoring: Differential pressure switch with warning lamp on the control cabinet
• Dimensions: (L x W x H) 1,718 x 830 x 2,050 mm
• Chassis: 4 plastic castors, 125 mm (two swivel, one with locking brake)
• Weight: approx. 340 kg
• Configuration / operator side: optionally right / left
• Paint finish: RAL 7001 (silver grey) and RAL 7035 (light grey)
iklan kecil
Leipzig
10.887 km
Deduster
WINTERJET-250
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3480 x 1100 x 2500 mm
Weight: 900 kg
Total power requirement: 5.5 kW
Dust extractor, complies with H3 standard JET-250
- 2 chip containers with clamping brackets
- Residual dust content: 0.1 mg/m³
- On/off switch
- Power consumption: 5.5 kW
- Mains voltage: 400 V / 50 Hz
- Rated current: 32 A
- Filter area: 23.5 m²
- 60 filter bags
- Automatic, pneumatic JET system filter cleaning
- Dust bin volume: 2 x 200 L, total 400 liters
- Suction connection: 250 mm
- Nominal air volume: 5400 m³/h
- Minimum air volume: 3500 m³/h
- Negative pressure: 2800 Pa
Laodpfx Adovz Hc Aeqeh
- Transport dimensions: L = 3480 mm, W = 1,100 mm, H = 2,500 mm
- Weight: 900 kg
iklan kecil
Saerbeck
11.190 km
Laser cutting mesin
DURMAHD-FS 3015 Smart Fiber 6 kW
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024,
iklan kecil
Bad Sooden-Allendorf
11.053 km
Deduster
Dust-ControlMobil 200
Hubungi
Kondisi: belum diuji (bekas), Tahun pembuatan: 1995, Rated power supply 380V 2.2kW
Lasdpfx Adovz Uhyeqeh
Suction nozzle 200 mm
mobile
2x chip bins of 190L each
Airflow 2500 m³/h
Dimensions (H x W x L): 2160 x 830 x 1900 mm
iklan kecil
Jerman
11.122 km
Deduster
HolzkraftRLA 160 PM
Hubungi
Kondisi: baru, Tahun pembuatan: 2021, New machine
Year of manufacture: 2021
Designed for wood dust and chips
Engineered for commercial use
Motor: 2.2 kW, IE3
Speed: 2,874 rpm
Extraction port: 160 mm
Filter area: 9.21 m²
Automatic pneumatic filter cleaning
Sound pressure level: 73 dB(A)
Nominal air flow: 1,448 m³/h
Vacuum: 2,247 Pa
Ledpfjqrw Erjx Adqoah
Chip collection volume: 2x165 l
Dimensions (LxWxH): 1,755 x 830 x 1,654 mm
Weight: approx. 274 kg
Availability: short-term
Location: Hochheim
iklan kecil
Menslage
11.162 km
Pengisi tekanan GAI 4033RE-HP (2022)
GAIDruckfüller
Hubungi
Kondisi: bekas, Tahun pembuatan: 2022, Overview
The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used for filling sparkling wine into cylindrical bottles ranging from 0.2L to 1.5L. It is equipped with a rinser (air or water), 16 spouts, 24 electropneumatic filling valves, and 3 capping turrets (each with 3 capping heads). Each capping turret has its own system for feeding and supplying closures. A cork dedusting system is installed. The machine features an integrated overpressure hood with pre-filters and absolute filters. It is sold complete with an automatic CIP system and two Win&tech pallet microfiltration units. The machine is still in operation and available for inspection. Its condition is as new, having only 200 operating hours.
Technical Data
Working direction: left to right
Capacity:
- 0.187 L – 4,500 bottles per hour at 4°C & 15°C
- 0.375 L – 4,500 bottles per hour at 4°C & 15°C
- 0.750 L – 4,000 bottles per hour at 4°C & 2,900 bottles per hour at 15°C
- 1.5 L – 2,000 bottles per hour at 4°C & 1,500 bottles per hour at 15°C
Currently set up for:
Glass bottles: 0.187 L, 0.375 L, 0.750 L, 1.5 L
Closures/Corks:
- Natural corks (boucheuse liège)
- Screw caps
Ledsv Aag Djpfx Adqsah
- Decorative closures (champagne style)
Including CIP system and wine filtration.
iklan kecil
Strassberg
11.178 km
Mesin pemotong pipa
TrumpfTruLaser Tube 5000 FIBER 3kW (T06)
Hubungi
Kondisi: bekas, Tahun pembuatan: 2015, Operating hours laser on: 32,824 h
Operating hours beam on: 28,572 h
Laser power: 3,000 kW
Max. mild steel: 8 mm
Max. stainless steel: 5 mm
Max. aluminium: 6 mm
Max. copper: 4 mm
Max. brass: 4 mm
Length: 18,000 mm
Width: 9,000 mm
Height: 2,800 mm
Machine weight: 21,000 kg
Max. tube raw material length: 6,500 mm
Max. finished part length: 4,500 mm
Ljdeuqdg Tjpfx Adqjah
Max. sleeve outer diameter: 152 / 170 mm
Min. sleeve outer diameter: 12 mm
Max. tube weight: 25 kg/m
Standard features
Machine:
- Robust machine frame
- Tube support for raw material with automatic retractable tube supports
- Push-through chuck with self-centering parallel clamping rollers
- High-precision drives
- LoadMaster Tube 6.5 m with bundle tray
- Discharge station
- Parts deposit
- Finished part tube support with extendable guide rollers
- Scrap conveyor belt with container
- Enclosed beam guide via fiber optic cable (LLK)
- PierceLine
- NitroLine
- FocusLine
- Programmable cutting gas pressure
- Automatic shutdown
- Ergonomic control panel with touch color screen
Trumpf TruLaser:
- External solid-state laser TruDisk 3001 with 1 fiber optic output, diode-pumped disk laser with 1.03 nm wavelength
- Excitation via pump diodes
- Laser power control
- Laser logbook function
Cutting unit:
- Universal cutting unit
- Single-head cutting strategy ControlLine
Control:
- Sinumerik 840 D SL
- Easy operation
- Online help
- Integrated technology data
- Teleservice via Internet
Data transfer:
- RJ45 network connection
- USB
Safety:
- CE marking
- Multi-beam light barriers
- Monitoring system for gas pressure, temperature and cooling water
- Compact extraction unit
- Protective cabin with certified safety glass
Optional equipment
- RapidCut technology package
- Bevel cutting - finished part length +1.5 m (to 4.5 m)
- SeamLine Tube
- Wireless Operation Point
- Low-scratch version LoadMaster Tube 6.5 m
- Tube diameter 15 mm
Automation
- LoadMaster Tube 6.5 m with bundle support
iklan kecil
Leipzig
10.887 km
Deduster
WINTERJET-350
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 5470 x 1100 x 2500 mm
Weight: 1100 kg
Total power requirement: 11 kW
Dust extractor, compliant with H3 standard JET-350
- 4 chip bins with clamping brackets, 600 x 500 mm
- Residual dust content: 0.1 mg/m³
- Including powder extinguisher
- On/off switch
- Power consumption: 11.0 kW
- Mains voltage: 400 V / 50 Hz
Ljdjvz E Nhopfx Adqoah
- Current draw: 32 A
- Filter area: 45.2 m²
- 120 filter bags
- Automatic, pneumatic filter cleaning with JET system
- Dust bin volume: 4 x 200 L, total 800 liters
- Suction inlet: 350 mm
- Airflow volume: 8640 m³/h
- Negative pressure: 3600 Pa
- Dimensions: L = 5470 mm, W = 1,100 mm, H = 2,500 mm
- Weight: 1100 kg
iklan kecil
Saerbeck
11.190 km
BARU! Sistem Pemotongan Laser Serat 6 kW
DURMAHD-FL 3015
Hubungi
Kondisi: baru, Tahun pembuatan: 2024, Brand: DURMA
Model: HD-F 3015 III Fiber
Year of Manufacture: New to order (Delivery time: 6–8 weeks)
Working area X-Y-Z: 3060 x 1530 x 160 mm
Laser power: 6000 W IPG
Lajdpjfkpamjfx Adqoh
Control system: Siemens Sinumerik 840D
Operating hours: 0 h
Sheet thickness – Mild steel: 25 mm
Sheet thickness – Stainless steel: 15 mm
Sheet thickness – Aluminium: 20 mm
Sheet size: 3048 x 1524 mm
Loading capacity: 200 kg/m²
X/Y axis speeds: 100 m/min
Simultaneous X/Y axis speed: 280 m/min
Positioning accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Installation area (L x W x H): approx. 14500 x 7500 x 2420 mm
Weight: approx. 12,000 kg
Standard Equipment:
- Automatic pallet changer
- Sinumerik 840D CNC control
- Automatic focus cutting head, Precitec Procutter F150 focus
- Automatic sheet position and size measurement system
- Automatic nozzle cleaning
- Positioning laser diode
- Centralized lubrication
- User-friendly parameter page (power-speed-pressure)
- External CAD/CAM programming software with optional Lantek autonesting
- Workspace illumination
- Warning beacon
- Multi-chamber extraction system
- Special laser cutting options
- Remote maintenance
- CE marking
Extended Equipment:
- IPG fiber laser source 6000 W incl. chiller
- Vanterm compact dust extraction & filtration unit
- Motorised chip conveyor for small parts/scrap
- Laser service kit
- Cloud licence
- Lantek Expert Inside software
- Lantek software with positioning laser diode and automatic sheet layer detection & measurement
- Pierceline
- Focusline
iklan kecil
Bad Sooden-Allendorf
11.053 km
Deduster
SpänexSMU 25
Hubungi
Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25-28/2018, laju aliran nominal: 2.500 m³/jam, lebar total: 750 mm, panjang total: 2.000 mm, tinggi total: 1.980 mm, sambungan udara terkompresi: 6 batang, daya: 3 kW (4,08 hp), SPÄNEX dust extractor, type SMU 25
Lodpfxotwp Nzj Adqjah
Connected load: 380V, 5.6A, 3kW
Weight: approx. 400 kg
mobile
Extraction nozzle: 180 mm
Nominal airflow: 2,500 m³/h
Operating modes: manual / automatic
Electro-pneumatic filter cleaning
Pneumatic connection: 6 bar
Dimensions (HxLxW): 1,980 x 2,000 x 750 mm
iklan kecil
Leipzig
10.887 km
Deduster
WINTERJET-300
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Dimensions (Length/Width/Height): 4,590 x 1,100 x 2,500 mm
Weight: 1,000 kg
Total power requirement: 7.5 kW
Dust extractor, compliant with H3 standard JET-300
- 3 chip collection containers with clamping brackets, 600 x 500 mm
- Residual dust content: 0.1 mg/m³
- Start/stop switch
- Power consumption: 7.5 kW
- Mains voltage: 400 V / 50 Hz
- Rated current: 32 A
- Filter area: 35.32 m²
- 90 filter bags
- Automatic, pneumatic filter cleaning (JET system)
- Chip bin volume: 3 x 200 liters
- Suction nozzle: 300 mm (right side)
- Nominal air flow rate: 6,000 m³/h
- Minimum air flow rate: 5,100 m³/h
Laedovz E Iqopfx Adqeh
- Negative pressure: 3,400 Pa
- Transport dimensions (L x W x H): 4,590 mm x 1,100 mm x 2,500 mm
- Weight: 1,000 kg
iklan kecil
Saerbeck
11.190 km
Laser cutting mesin
DURMA10 kW HD-F 3015 III Fiber
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, daya laser: 10.000 W, ketebalan lembaran (maks.): 30 mm, ketebalan pelat baja (maks.): 30 mm, tebal plat aluminium (maks.): 30 mm, ketebalan lembaran kuningan (maks.): 20 mm, ketebalan pelat tembaga (maks.): 15 mm, kecepatan pemposisian: 5 m/menit, akurasi pengulangan: 5 mm, berat keseluruhan: 12.000 kg, masa garansi: 12 bulan, jangkauan kerja: 3.050 mm, Perlengkapan: penghadang cahaya keselamatan, Manufacturer: DURMA
Model: HD-F 3015 III Fiber
Working Area X-Y-Z: 3060 x 1530 x 160 mm
Laser Power: 10,000 Watt IPG
Control: Siemens Sinumerik 840D
Operating Hours: 0 h
Sheet Thickness Mild Steel: 30 mm
Sheet Thickness Stainless Steel: 26 mm
Sheet Thickness Aluminium: 15 mm
Sheet Thickness Brass: 20 mm
Sheet Thickness Copper: 15 mm
Sheet Size: 3048 x 1524 mm
Load Capacity: 200 kg/m²
X-Y Axis Speed: 100 m/min
Simultaneous X-Y Axis Speed: 280 m/min
Positioning Accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Installation Dimensions (L/W/H): approx. 14,500 x 7,500 x 2,420 mm
Weight: approx. 12,000 kg
Standard Equipment
- Automatic pallet changer
- Sinumerik 840D control
- Precitec Procutter F150 focus autofocus cutting head
- Automatic sheet position and size measuring system
- Automatic nozzle cleaning
- Positioning laser diode
- Central lubrication
- User-friendly interface (parameter page: power-speed-pressure)
- External CAD/CAM programming software with optional Lantek auto-nesting
- Work area lighting
- Warning light
- Multi-chamber extraction system
- Special laser cutting options
- Remote maintenance
- CE marking
Advanced Equipment
- IPG fiber laser source 10,000 W including chiller
- Vanterm compact dust extraction filter
Ljdpfx Asdx Naljdqoah
- Motorised chip conveyor for small parts/scrap
- Laser service set
- Cloud license
- Lantek Expert Inside software
- Lantek software with positioning laser diode and automatic sheet detection & measurement
- Automatic nozzle changer
The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time.
Further machines are ready for demonstration at our Staufenberg facility.
Further information available on request.
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

iklan kecil
Bad Sooden-Allendorf
11.053 km
Deduster
NestroNE 200
Hubungi
Kondisi: bekas, Electrical connection: 480V, 4 kW
Filter surface area: 15.8 m²
Nominal airflow: 3,200 m³/h
Minimum airflow: 2,262 m³/h
Extraction connection: diameter 200 mm
Weight: approx. 550 kg
Ledpfx Asvz U Srodqjah
Dimensions (LxWxH): 2,400 x 900 x 2,100 mm
iklan kecil
Saerbeck
11.190 km
Laser cutting mesin
DURMAHD-F 3015 III Fiber
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Manufacturer: DURMA
Model: HD-F 3015 III Fiber
Year of manufacture: 2024
Working area X-Y-Z: 3060x1530x160 mm
Laser power: 4000 Watt IPG
Control: Siemens Sinumerik 840D
Operating hours: 0 h
Sheet thickness mild steel: 20 mm
Sheet thickness stainless steel: 10 mm
Sheet thickness aluminium: 12 mm
Sheet thickness brass: 10 mm
Sheet thickness copper: 6 mm
Sheet size: 3048x1524 mm
Max. sheet loading weight: 200 kg/m²
X-Y axis speeds: 100 m/min
Simultaneous X-Y axis speed: 280 m/min
Positioning accuracy: +/- 0.05 mm
Repeatability: +/- 0.05 mm
Footprint L/W/H: approx. 14500x7500x2420 mm
Weight: approx. 12,000 kg
Standard features
- Automatic pallet changer
- Sinumerik 840D control system
- Precitec Procutter F150 focus auto-focus cutting head
- Automatic sheet position and size measuring system
- Automatic nozzle cleaning
- Positioning laser diode
- Central lubrication
- User-friendly parameter page interface (power–speed–pressure)
- External CAD/CAM programming software with automatic nesting, optionally Lantek software
- Work area lighting
- Warning beacon
- Multi-chamber exhaust system
- Special laser cutting options
- Remote maintenance
Laodpfx Ajd Sd Tnsdqeh
- CE marking
Extended features
- IPG fiber laser source 4000 Watt including chiller
- Filter, compact dust extraction unit Vanterm
- Motorised chip conveyor for small parts/waste
- Laser service set
- Cloud license
- Lantek Expert Inside software
- Lantek software with positioning laser diode and automatic sheet position recognition/measurement
- Automatic nozzle changer
- Integrated camera
The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time.
Further machines are available for demonstration at our premises in Staufenberg.
Further information available upon request.
iklan kecil
Bad Sooden-Allendorf
11.053 km
Sistem ekstraksi udara bersih
HolzkraftRLA 125
Hubungi
Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2433345525, Extraction nozzle 125 mm
Nominal volume flow rate 884 m³/h
Motor power 2.2 kW 16A
mobile
Weight approx. 194 kg
Laedpfxsiw D U No Adqoh
LxWxH: 1000 x 840 x 1650 mm
Container size 730 x 660 mm
Manual shaker
iklan kecil
Bad Sooden-Allendorf
11.053 km
Deduster
RiedexDM-200/M-B
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 200642, laju aliran volumetrik: 3.200 m³/jam, RIEDEX – dust extractor
Model DM-200/M-B
max. volumetric flow rate: 3200 m³/h
motor power: 4.0 kW
Laedpfx Adjtwz Hljqoh
without extinguishing device
left-hand version
motorized cleaning
with chip bins
Kami memudahkan pencarian untuk Anda: "dedusting"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
























































































































































































