Beli Demag Pk 2 Nf bekas (508)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, 2 unit DEMAG hoist P425 H11 identik, Kapasitas angkat: 10 ton Hodpfx Aowaflfehwoi Kecepatan angkat: 5,5 m/menit Kecepatan angkat perlahan: 0,5 m/menit Dari stok suku cadang besar, lihat juga penawaran saya yang lain. Info: Kami memiliki lebih dari 20.000 artikel DEMAG di gudang! Lihat juga penawaran lain dari inventaris saya!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Perlengkapan: dokumentasi / manual, demag-systec-100-420-310-2015 Hsdpoyg Eu Sofx Ahwei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 96.986 h, gaya penjepit: 600 kN, diameter sekrup: 30 mm, en-GB Hjdeyg Nfuspfx Ahwsi

Kondisi: bekas, Tahun pembuatan: 1978, de-hu-it-lt-001 Hjdpou Szhpofx Ahwsi

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8754-0010, Plastic injection moulding machine | DEMAG Ergotech – Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar distance horizontal [mm]: 475 Clear tie bar distance vertical [mm]: 450 Diameter of centering ring [mm]: 125 Minimum installation height [mm]: 230 Hjdpfx Asyguk Aohwei Maximum installation height [mm]: 560 Maximum opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread [M]: 16 Multi turntable type: turntable Turntable diameter [mm]: 700 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,160 Maximum tool weight, moving platen [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Unit arrangement: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7174-0115, Plastic injection moulding machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Hsdpoyguhhofx Ahwsi Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Tie bar spacing horizontal [mm]: 470 Tie bar spacing vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Rotary table diameter [mm]: 600 Thread rotary table [M]: 16 Maximum mould weight [kg]: 1,000 Maximum mould weight on moving side [kg]: 500 Screw diameter [mm]: EE1:30, EE2:22 Maximum shot weight [g] PS: EE1:94, EE2:42 Aggregate arrangement: EE1: horizontal, EE2: vertical Equipment: Core pull 2-fold, with robot Inspection available anytime by appointment. Free loaded on truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi110/470

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 862-1053, plastic-injection-moulding-machine-mannesmann-demag-ergotech-500 0-2300 Hodpfxsygikwo Ahwji

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8040-0008, Kunststoff-Spritzgießmaschine-Demag-Ergotech-Systec-280-630-840 Hsdsygidwspfx Ahwoi

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7363-0044, en-001 Hjdoygiafopfx Ahwei

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jarak gerak sumbu Z: 1.500 mm, Perlengkapan: dokumentasi / manual, specs-001 Hedpfx Ahsyfhw Howoi

Kondisi: baik (bekas), Tahun pembuatan: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mould height: 330 x 830 mm Opening stroke: 675 mm Maximum diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Hsdjrgw Exepfx Ahwsi Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner zones: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Manufacturer: Demag Hjdpskqm Aiefx Ahwoi Model: DH520 H20 4/1 F10 Year of manufacture: 2000 Load capacity approx.: 8,000 kg Hook travel approx.: 10,000 mm Trolley gauge approx.: 1,400 mm Reeving: 4/1 Drive group: FEM/ISO 2m/M5 Operating speeds: Hoist approx. 0.8/8.0 m/min Trolley travel approx. 5.0/20.0 m/min Certificate of remaining service life: approx. 80% by certified inspector Equipped with: - Mechanical fine hoist F10 - Wire rope and bottom hook block 4/1 - Trolley drive

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2004, Brand: DEMAG Model: DH1063 H24 4/1 FG10 Year of manufacture: 2004 Load capacity approx.: 25,000 kg Hook path approx.: 12,000 mm Load classification: FEM/ISO 1Bm/M3 Operating speeds: Hoist approx. 6.3/0.6 m/min Certificate for remaining service life of approx. 80% issued by an authorized inspector Equipped with: - Wire rope - Fine lift FG10 Hedpfxegiyf As Ahwoi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 12.611 h, gaya penjepit: 2.500 kN, diameter sekrup: 60 mm, berat injeksi: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It features a clamping force of 2,500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine is equipped with a linear robot system and a 9-zone hot runner mold temperature control. Take advantage of this opportunity to purchase the DEMAG El Exis S250/630-2300 all-electric injection molding machine. Contact us for further information on this machine. • Clamping unit • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 950 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Maximum daylight (open gap): 1,505 mm • Opening stroke: 675 mm • Ejector: 200 mm stroke / 80 kN force • Mold weight capacity: 3,300 kg total (1,100 kg fixed / 2,200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ • Shot weight (PS): 579 g • Injection pressure: 1,351 bar • Screw rotation speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2,420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating capacity: 14.8 kW Hsdpjyftamsfx Ahwoi • Hybrid drive power consumption: • Total installed power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Needle shut-off control: 1x hydraulic / 0x pneumatic • Mold temperature control: integrated 9-zone hot runner • Interfaces: printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle: 2.00 s • Noise level: 74 dB(A) • Owner's note • Describes a hybrid high-speed machine with a larger injection unit (Type 2300 vs. Type 840) than the stock machine mentioned above.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 91.810 h, gaya penjepit: 2.500 kN, diameter sekrup: 60 mm, berat injeksi: 579 g, en1 Hedpfx Ahsyfq Alowji

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1992, panjang total: 23.880 mm, kapasitas angkut: 10.000 kg, tinggi kerja: 10.000 mm, Perlengkapan: dokumentasi / manual, Overhead crane Deman/Demag – Jenis: double girder – Kapasitas: 10 ton – Ketinggian angkat: 10 m Hjdpfx Aeyi Dv Hohwoi – Tahun pembuatan: 1992 – FEM / ISO hoist: 1 Am – Jenis hoist: Demag DH 525 wire rope hoist Dimensi – Rentang: 23.880 mm sumbu ke sumbu Kecepatan: – Mengangkat: 6,3/0,63 m/menit – Pergerakan troli: 25/6,3 m/menit – Pergerakan crane: 40/10 m/menit Fitur: – Kontrol: remote control radio – Buku crane tersedia: ya – Skema kelistrikan tersedia: ya – Kondisi: dalam kondisi baik, terawat dengan baik – Tersedia April 2026

Kondisi: baik (bekas), Overall height: 2,960 mm Lifting range: 1,100–2,400 mm Boom length: 900 mm Hodpfxeik E S Ds Ahwji

Kondisi: baik (bekas), Load capacity: 500 kg Hedpfx Aeg T Ib Hohwoi Overall length: 10 m

Kondisi: bekas, Tahun pembuatan: 2007, 1 Hodpfsw E N S Tox Ahwsi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Several older plastic injection molding machines from Arburg, Demag, and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000 kN, shot weight: 140 g, minimum/maximum mold installation height: 180 mm/480 mm, opening stroke: 320 mm, tie bar spacing: 360 mm/355 mm, screw diameter: 40 mm, core pulls: 1. Hedpfxox Hz Sbo Ahwji 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500 kN, shot weight: 207 g, minimum/maximum mold installation height: 320 mm/550 mm, opening stroke: 430 mm, tie bar spacing: 460 mm/460 mm, screw diameter: 45 mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000 kN, shot weight: 130 g, minimum/maximum mold installation height: 200 mm/400 mm, opening stroke: 350 mm, tie bar spacing: 400 mm/400 mm, screw diameter: 38 mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250 kN, shot weight: 25 g, minimum/maximum mold installation height: 225 mm/not specified, opening stroke: 325 mm, tie bar spacing: 270 mm/270 mm, screw diameter: 20 mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850 kN, shot weight: 108 g, minimum/maximum mold installation height: 250 mm/625 mm, opening stroke: 375 mm, tie bar spacing: 320 mm/320 mm, screw diameter: 35 mm, core pulls: 0. An on-site inspection is possible. Sale of individual machines is possible.

Kondisi: bekas, Tahun pembuatan: 2006, A Demag Ergotech injection moulding machine, including a Wittmann robot and machine enclosure, is available. 1) Demag Ergotech 50/355-200 injection moulding machine, year of manufacture: 2006, tie bar spacing X/Y: 355mm/355mm, min. mold height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, shot weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control system: CDIAS. 2) Wittmann W721 handling robot, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Safety cage. Documentation available. An inspection on site is possible. Hsdpfswvadnjx Ahwsi

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), de-hu-001 Hjdpfxsxrf Nro Ahwoi

Kondisi: baik (bekas), Tahun pembuatan: 2008, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, Perlengkapan: dokumentasi / manual, tech-specs-001 Hsdpfx Ahjyark Tswei

Kondisi: baik (bekas), Tahun pembuatan: 2010, gaya penjepit: 1.600 kN, Perlengkapan: dokumentasi / manual, Sumitomo Demag Systec 160/520 - Injection Unit 430 Clamping Unit Clamping force: 1600 kN Locking force: 1760 kN Max stroke: 500 mm Min. mold height: 275 mm Max. mold height: 585 mm (685 mm with WA) Max. daylight between platens: 1085 mm (1185 mm with WA) Platen size: 770 × 770 mm Tie bar spacing: 520 × 520 mm Max. mold weight: 2200 kg Max. load on moving platen: 1300 kg Max. load on fixed platen: 1700 kg Ejector Ejector stroke: 160 mm Ejector force: 59 kN Ejector return force: 29 kN Injection Unit 430 L/D ratio: 20 Screw diameter: 40 mm Injection pressure: 2025 bar Shot volume: 231 cm³ Shot weight (PS): 210 g Max. dosing stroke: 184 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Hsdpfeyarfdsx Ahwei Nozzle contact force: 80 kN Barrel heating capacity: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Electric screw drive (WA): 22 kW Material hopper capacity: 35 l MACHINE OVERALL Oil tank capacity: 400 l Pump motors: 22 / 30 / 30 kW Total power: 31.4 / 39.4 / 39.4 kW 33.1 / 41.1 / 41.1 kW 33.3 / 41.3 / 41.3 kW EUROMAP 6 (dry cycle): 1.95-364 / 1.75-364 / 1.75-364 Machine weight (without oil): 6800 kg Dimensions (L × W × H): 5.3 × 1.6 × 2.1 m Noise level: 68 / 71 / 68 dB(A)

Tahun pembuatan: 2019, jam operasional: 18.138 h, Kondisi: siap digunakan (bekas), berat keseluruhan: 25.340 kg, SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 ini diproduksi pada tahun 2019. Mesin injeksi listrik yang kokoh ini memiliki diameter ulir 50 mm, gaya penutupan 3.500 kN, dan jarak antara tiang 820 mm. Mesin ini telah mencatat 18.138 jam operasi dengan 12.875.090 siklus. Jika Anda mencari mesin injeksi berkualitas tinggi, pertimbangkan SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 yang kami tawarkan untuk dijual. Informasi tambahan: • Diameter ulir: 50 mm • Volume dosis maksimum: 530 cc • Jumlah siklus: 12.875.090 Hsdpfx Aex D Nxzehwei • Jarak antara tiang: 820 mm • Gaya penutupan: 3.500 kN