Beli Demag Df 115 C bekas (532)

Kondisi: siap digunakan (bekas), Clamping force: 350 kN, tie bar distance: 280 mm/280 mm, platen dimensions X/Y: 410 mm/410 mm, minimum mold installation height: 180 mm, maximum opening stroke: 350 mm, maximum platen distance: 530 mm, screw diameter: 22 mm, shot volume: 47.5 cm³, shot weight (PS): 41 g, injection pressure: 2440 bar, control system: NC4, heating capacity: 6.3 kW. Machine dimensions X/Y/Z: approx. 3100 mm/1100 mm/1600 mm, weight: approx. 1800 kg. An on-site inspection is possible. Iodpfxswaa H Do Alcsib

Kondisi: bekas, Tahun pembuatan: 2002, Opportunity to acquire a DEMAG injection moulding machine with 1000T clamping force and 140,000 operating hours. Can be inspected in operation by appointment. Availability: 06/2026 Iodpfx Alsyq Dqgoceib Important: The information on this page has been obtained to the best of our knowledge and belief. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, this information is non-binding and does not constitute a contractual condition. We recommend that you verify all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, we recommend organising a live video inspection in most cases. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mould height: 500 mm Max. mould height: 1200 mm Tie bar spacing: 1400 × 1120 mm Platen size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ({P_{max}}): 190 bar Max. flow rate ({Q_{max}}): 486 l/min System current: 409 A Heating current: 154 A

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 5.281 h,

Kondisi: baru, Tahun pembuatan: 2015, nomor mesin/kendaraan: 40600039, Partai tersedia. Beberapa unit tersedia di stok. Produk-produk ini baru dan belum pernah digunakan. Iedpfxoywy Ens Alceib

Kondisi: sangat baik (bekas), Steuerschalter Brand: DEMAG Type: DSE 10 C/CS Iiodpfx Alof Ezbtecob Documentation available

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 150,78 kW (205,00 hp), jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 300 l, berat keseluruhan: 53.523 kg, berat muatan maksimum: 112.000 kg, Tahun pembuatan: 2006, nomor mesin/kendaraan: 506081, Perlengkapan: derek, hidrolik, kabin, GEBRAUCHTER DEMAG KRAN ZUM VERKAUF DEMAG RAUPENKRAN Iisdpjumqy Eefx Alcsb MODELL: A600 C BAUJAHR: 2006 Guter Betriebszustand Die Maschine wird im aktuellen Zustand verkauft Für weitere Informationen bitte kontaktieren: Vijay JPN Industrial Trading Pte Ltd, 13A, Pandan Crescent, Singapore-128478

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2400 bar Dosage volume: 22.8 cc Clamping Unit: Clamping force: 25 t Tie bar spacing: 280 x 280 mm Platen size: 410 x 410 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Isdpfsy Smivex Alceib Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20 x 1.30 x 1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Isdpfx Ajy Sl Anolcsib Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air valve x 5 Hydraulic core pull with proportional valve, controlled x 1 Hot runner controller x 5 Injection unit hardened – bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servo motors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel range in axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor possible at additional cost Dimensions: Weight: 15,750 kg Length/width/height: 8.26x2.01x2.27 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping Unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional Equipment: Euromap 67 Robot interface Control system with air valve Control system with 5 hot runner zones Hardened injection unit - bimetallic barrel Moog proportional valve on injection unit – precise injection Parallel movements Central lubrication 3 variable-displacement hydraulic pumps Built-in printer The machine has been regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR853 Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, telescopic Y, Z, B, C Axis travel ranges: X-1200, Y-2400, Z-4000 Touchscreen control panel Robot safety package Ijdsy Sl Ahjpfx Alcoib Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor available at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection Unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen dimensions: 600x600 mm Ejector: hydraulic Clamping system: hydraulic Control system: NC5 Additional equipment: Iiodpfxoy Slzws Alcsb Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Main motor of the machine - Servo motor driven with inverter - Energy saving Built-in printer Machine has been regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servo motors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, protective enclosure Purchase of the robot at extra cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: bekas, jarak tempuh: 221.291 km, Tahun pembuatan: 2009, jam operasional: 15.356 h, Antrieb: Rad Leergewicht: 22.000 kg Hubkapazität: 30.000 kg Abmessungen des Laderaums: 830 x 240 x 345 cm Seriennummer: 86584 Zustand der Bereifung vorne: 70 Isdowwqbyjpfx Alcsib Zustand der Bereifung hinten: 70 Wenden Sie sich an PFEIFER GROUP, um weitere Informationen zu erhalten.

Kondisi: bekas, jarak tempuh: 62.585 km, Tahun pembuatan: 2020, jam operasional: 5.422 h, Tujuan penggunaan: Konstruksi Penggerak: Roda Berat kosong: 48.000 kg Iedpfxjwk T Uis Alcsib Kapasitas angkat: 220.000 kg Nomor seri: 82609 Kondisi ban depan: 90 Kondisi ban belakang: 90 Dimensi transportasi (P x L x T): 15,3x3x4 Silakan hubungi PFEIFER GROUP untuk informasi lebih lanjut.

Kondisi: bekas, jarak tempuh: 62.585 km, Tahun pembuatan: 2020, jam operasional: 5.422 h, Penggerak: Roda Berat kosong: 48.000 kg Ijdpfxswk Aw Hj Alcjib Kapasitas angkat: 220.000 kg Nomor seri: 82609 Kondisi ban depan: 90 Kondisi ban belakang: 90 Dimensi transportasi (P x L x T): 15,3 x 3 x 4 m Hubungi PFEIFER GROUP untuk informasi lebih lanjut.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Perlengkapan: dokumentasi / manual, demag-systec-100-420-310-2015 Iijdpfxoyg Eu Se Alcjb

Kondisi: bekas, Tahun pembuatan: 2000, overview This complete hot filling line for non-carbonated beverages/juices was assembled by the previous operator and ran smoothly until it was decommissioned. The system is designed for the processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes equipment for thermal pretreatment, filling, post-cooling, and final packaging. The line is still installed and can be inspected on site at any time. Technical Data Output: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.5 l / 0.7 l / 1.0 l / 1.5 l Application: Hot filling of juice and non-carbonated beverages Configuration: • Heating/pasteurization system (plate heat exchanger-based) • Rotary filler with 28 filling valves and 4 capping heads • Cooling tunnel with 3 zones • Manual layer de-palletizing crane system • Rotary bottle rinser • Carton erecting and sealing system Supply: Compressed air, electrical power Scope of Supply De-palletizing crane system | DEMAG | Manual de-palletizing of layers with air-cushion gripper system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot filling Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger-based heating system Carton erecting machine | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton erecting unit Carton sealing machine | BORTOLIN | Hotmelt carton sealing Adhesive system | Nordson | Series 3400 | Hotmelt unit Iisdpfxoy Rmfbj Alcob Conveyor systems | Various transport conveyors

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 17.577 h, gaya penjepit: 1.600 kN, tinggi total: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart available for sale. Please contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Advantages • Clamping unit: 160 / Clamping force: 1,760 kN / Maximum opening stroke: 495 mm / Minimum mould installation height: 275 mm / Maximum mould installation height: 585 mm • Maximum distance between platen faces: 1,080 mm / Mounting platen size (H x V): 760 x 785 mm / Clear tie bar distance (H x V): 520 x 520 mm • Ejector stroke: 125 mm / Ejection force: 35 kN • Injection unit: 340 / Screw diameter: 35 mm / L:D ratio: 20 / Injection rate (PS) without accumulator: 288 cm³/s • Metering stroke: 162 mm / Maximum nozzle stroke: 350 mm / Nozzle immersion depth (SVO): 20 mm / Nozzle contact force: 30 kN • Material hopper capacity: 35 L / Max. injection speed, standard: 300 mm/s / Max. injection speed, enhanced: 500 mm/s • Net weight without oil fill: 7,300 kg Additional Information Electrical and Pneumatic Interfaces: Power Sockets: 2 x Schuko (1Ph, 230V, 10A) 2 x IECEE (3Ph, 400V, 16A) – disconnectable via main switch Additional Schuko socket also provided (same rating) Valves: 1 x pneumatic 5/2 valve on moving platen (programmable) 2 x pneumatic 5/2 valves on stationary platen (programmable) I/O: 3 digital inputs / 3 digital outputs (freely programmable) Terminal block outside control cabinet Air & Cooling: Centralised air supply and piping Cooling system: open circuit Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) Separate water supply connection for cooling (mould + machine) Deactivation of mould cooling (programmable by time) Mechanical Properties and Movement: Clamping and injection unit colours: Jet black (RAL9005): bed, pump unit, base cabinet Signal white (RAL9003): clamping unit, injection unit, safety guards, covers, safety doors Mould mounting platens: E-standard arrangement (similar to EUROMAP, March 1996) No lateral ejector plate Ejector: held in front position against spring-loaded ejector in mould Standard mould height Standard closing speed Motion only active with safety guard closed Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter Non-return valve: 3-piece, ring design Control, Programming and Monitoring: Inputs/outputs and interlock logic: freely programmable Switching programs (e.g., dry cycle, start-up scrap counter, timer-controlled cooling) Injection process: Max. injection force at max. injection speed: 200 mm/s Back pressure programmable via 6-step polygon Hold pressure switchover dependent on melt pressure Post-injection, back pressure, metering: closed-loop control Feed throat temperature control: closed-loop, max. 90°C ±9°C Reduced nozzle closure force (programmable) Clamping force: closed-loop control Isdsx D Hnmjpfx Alceib

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 67.553 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 500 kN, diameter sekrup: 30 mm, jarak antara tiang: 355 mm, volume langkah: 106 cm³, berat injeksi: 96 g, tinggi cetakan (min.): 210 mm, langkah pembukaan: 400 mm, lebar pelat: 480 mm, tinggi pelat: 480 mm, tinggi pemasangan: 400 mm, kapasitas pemanasan: 8,3 kW (11,28 hp), daya: 11 kW (14,96 hp), Mesin DEMAG Ergotech Extra 50-200 dengan robot penangan SEPRO Axess S3. Siap produksi dan dapat dilihat sewaktu-waktu. 2 kaskade pneumatik, 1 core puller AS, 6 zona hot runner terintegrasi. Iiedpfjx Ex R Esx Alcsb

Kondisi: bekas, Tahun pembuatan: 2003, (1) Mesin cetak injeksi, Penanganan: Sepro Robotique | Success 7 | 2016 Kontrol suhu: HB Therm | Lain-lain: 1x Penutup Pelindung 1x Sabuk Konveyor, perusahaan RAU Maschinenbau 1x Pengendali Hot Runner 1x Sabuk Konveyor, perusahaan SAS Grillet, 1x Unit Konveyor, perusahaan Motan Rincian Teknis: Ukuran mesin: 500/370-200 Catu daya: 3/N/PE AC 400 V Frekuensi (Hz): 50 Arus (A): 94 Berat (t): 3,3 Tekanan (bar): 210 Aliran (l/menit): 130 Isdpfx Asy N R U Rslcjib

Kondisi: bekas, Tahun pembuatan: 2000, (1) Mesin injection molding, Penanganan: Wittmann | WX142-0325 | 2023 Lain-lain: 1x penutup pelindung 1x Sistem Penanganan, merek Wittmann Seri 9 1x Sabuk Konveyor incl. fungsi pergantian boks 1x Saluran pembuangan produk cacat V2A 1x konversi Euromap 12/67 1x Unit Hot Runner eksternal, merek Mold Masters M1-06-12 (tahun pembuatan 2016), 12 zona 1x Unit konveyor, merek Motan Rincian Teknis: Catu daya: 3x400 V Frekuensi (Hz): 50 Arus 1 (A): 196 Arus 2 (A): 110 Arus 3 (A): 86 Arus 4 (A): 67 Berat (t): 9,7 Iisdpfoy N R Uqjx Alcob Tekanan (bar): 190 Debit (l/menit): 190

Kondisi: bekas, Tahun pembuatan: 2014, (1) Mesin injeksi molding, Penanganan: Sepro Robotique | Success 22 | 2016 Pengendalian suhu: GWK Lain-lain: 1x Penutup Pelindung 1x sabuk konveyor, 1x unit konveyor, merek Somos FG 204; tahun pembuatan 2022 Rincian Teknis: Gaya penjepit (kN): 2100 Jarak antar tie bar (mm): 580 Unit injeksi: 430 Catu daya: 3/400 V Frekuensi (Hz): 50 Arus 1 (A): 175 Arus 2 (A): 116 Arus 3 (A): 59 Berat (t): 8,93 Iisdpey N R R Esfx Alceb Tekanan (bar): 190

Kondisi: bekas, Tahun pembuatan: 2003, (1) Mesin injeksi, Penanganan: Wittmann | W621 | 2003 Pengontrol suhu: HB Therm | HB-100 Z1 | 2013 Ijdpfxsy N R Iqj Alceib Lain-lain: 1x Pelindung Keselamatan 1x Sabuk Konveyor 1x Pengontrol Hot Runner, merek Mold Masters, 1x Unit Konveyor, merek Motan Detail Teknis: Catu daya: 3x400 V Frekuensi (Hz): 50 Arus 1 (A): 189 Arus 2 (A): 152 Arus 3 (A): 37 Berat (t): 10,1 Tekanan (bar): 190 Aliran (l/menit): 206

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, gaya penjepit: 500 kN, diameter sekrup: 22 mm, jarak antara tiang: 355 mm, volume langkah: 41 cm³, tekanan injeksi: 2.800 batang, berat injeksi: 37 g, tinggi cetakan (min.): 210 mm, Gaya penutupan: 50 t Tahun produksi: 2006 Unit injeksi .../200 Diameter sekrup: 22 mm Tekanan injeksi spesifik: 2800 bar Volume injeksi: 41,8 ccm Sistem penutupan cetakan 50/... Gaya penutupan: 50 t Ukuran pelat cetakan: 520 x 520 mm Jarak antar kolom: 355 x 355 mm Tinggi cetakan: 210 mm Jarak buka: 400 mm Jarak maksimum pelat: 610 mm Berat: 2700 kg Iijdpfxjyz Sd Ds Alcsb Dimensi (P x L x T): 3,8 x 1,1 x 2,1 m Kontrol: NC4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, gaya penjepit: 3.000 kN, berat keseluruhan: 13.900 kg, en Iodpfx Aoy Icikjlcoib

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Panduan tali untuk DEMAG DH Iiodpfxsxu Di Ae Alceb kiri 5-6/14 kiri 1/7,5 kiri 3-4/11 kanan 5-6/11,3 kiri 10/20 kiri 20/25 Atas permintaan tersedia banyak motor KBH / KBF / KBV / K-Motor lainnya, suku cadang, rem, dan lainnya. Faktur termasuk PPN.

Kondisi: baik (bekas), Tahun pembuatan: 2008, gaya penjepit: 500 kN, Demag Systec 50/370-120 (2008) Isdpfxsy Eyq He Alcsib