Beli Depo bekas (7)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Depo ZPS Hjdpfx Ajzdrahshnjfh Tipe MCFV 1260 S Tahun Pembuatan 2010 Konveyor serpihan Kontrol: -Heidenhain iTNC 530 -Handwheel elektronik Spindel utama: -kecepatan maksimum 8000 rpm -Toolholder SK50 Meja: -Area penjepitan 1450 x 590 mm -Kapasitas beban maksimum meja 1350 kg Penukar alat: -24 slot majalah Sumbu gerak: -X - 1270, Y - 610, Z - 760 mm Aksesori: -Probe pengukuran 3D inframerah Waktu pengiriman: -Segera

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, The Depo/ZPS machining center is equipped with an overhead gantry design. As a result, all machine movements are carried out by the tool, which ensures that all moving masses – the workpiece and clamping fixtures – remain constant during machining. Year of manufacture: 2008 Spindle hours: approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 electronic handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Specifications Travel distances: - X: 1,000 mm, Y: 900 mm, Z: 600 mm Worktable: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1–18,000 rpm - Torque S1/100%: 80 Nm - Tool holding fixture: HSK 63 Form A - Main spindle with jacket cooling - Air through the spindle for tool cooling (ILZ) - Coolant supply with 40 bar through the spindle (IKZ) Feed rates: - Max. feed in X-, Y-, and Z-axes: 40 m/min - Rapid traverse in X-, Y-, and Z-axes: 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside work area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic compensation of tool and component dimensions: - Tool radius and length measurement Hjdey Hp Rrspfx Ahnefh - Tool breakage detection - Blum laser (Inspect) for workpiece measurement Chip disposal system: - Gooseneck slat conveyor - (Chip trolley must be provided by the buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area safety cladding - Crane loading possible by removing the chip protection in the front area - Work area illumination with two fluorescent lamps on the side walls Machine data: - Space requirement incl. service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. auxiliary units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making facility. The machine is equipped with an exceptionally good and practice-oriented configuration and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 6.900 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 760 mm, berat benda kerja (maks.): 1.350 kg, jam operasional spindle: 5.500 h, Perlengkapan: konveyor serpihan, DEPO/ZPS MCV 1060 | 3-sumbu Heidenhain TNC 640 SK40 (spindle putih) Pendingin air dari luar. Udara melalui spindle. Penukar alat 30 posisi. Hjdeu Db Hxepfx Ahnofh Kondisi sangat baik! Syarat pembayaran fleksibel. Tersedia segera!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 220 294-0025, jarak pergerakan sumbu X: 1.650 mm, jarak lintasan sumbu Y: 810 mm, jarak gerak sumbu Z: 810 mm, model controller: HEIDENHAIN TNC 426 PB, kecepatan spindel (maks.): 6.000 rpm, RINCIAN TEKNIS Perpindahan Sumbu X: 1.650 mm Perpindahan Sumbu Y: 810 mm Perpindahan Sumbu Z: 810 mm Kerucut Spindel: ISO 40 Kecepatan Spindel: 30 - 6.000 rpm Motor Spindel: 17 / 20,5 kW Jumlah alat: 2 x 16 Luas meja: 1.800 x 780 mm Jumlah alur-T: 5 Hfodpfeyg Dmmjx Ahneh Kecepatan rapid x/y/z: 20 m/menit DETAIL MESIN Kontrol: HEIDENHAIN TNC 426 PB Dimensi & Berat Kebutuhan ruang: sekitar 5.585 x 2.440 x 2.360 mm Berat mesin: sekitar 11.400 kg PERLENGKAPAN 2x majalah alat dengan 16 slot Konveyor serpihan Sistem pendingin Manual pengoperasian

Kondisi: baik (bekas), Collet chuck, tool holder, tool arbor, milling arbor, milling tool, short shank system Hedpjhupulefx Ahnefh - Manufacturer: DEPO, milling arbor SK50 - Type: 100 5 77 - Milling tool holder: tapered, Ø 34/24 mm, M16 - Overall dimensions: Ø97 x 385 mm - Weight: 5.9 kg

Kondisi: bekas, Tahun pembuatan: 2003, Travel (X) 1000 mm Travel (Y) 800 mm Travel (Z) 700 mm Control HEIDENHAIN iTNC 530 Total power requirement 50 kW Machine weight approx. 16 t Required space approx. m DEPO SPEED (Taiwan) Vertical Machining Center in portal design with HEIDENHAIN CNC control Type 530 Model Speed 1008 Year of manufacture 2003 Table size 1,350 x 1,300 mm X-axis – cross slide 1,000 mm Y-axis – cross beam 800 mm Z-axis – vertical quill 700 mm Max. table load approx. 8,000 kg Height under spindle approx. 800 mm Max. workpiece dimensions approx. 1,100 x 900 x 600 mm Spindle taper HSK-A 80 Spindle speed, stepless 30 – 14,000 rpm Feedrates/rapid traverse for X/Y/Z axes 20/24 m/min Acceleration in XYZ-axes 3.5 m/s² Feed drive torques 42 Nm Milling spindle torque 150 Nm Spindle drive 25/27 kW Total drive approx. 50 kW - 400 V - 50 Hz Weight approx. 16 tons Accessories / Special equipment: Hjdpfx Ahjt Hw Hrensfh • HEIDENHAIN CNC path control Type iTNC 530 with all essential subprograms, large monitor and hand control unit • Tool magazine with 10 positions for tools max. 80x300x12 kg • Internal coolant supply and minimum quantity lubrication (presumably also cool air) • Separate rotary and tilting table to mount on main table with its own, approx. 400 x 400 mm table top, as 4th and 5th axis, type DEPOTABLE • RENISHAW laser measuring system for tool measurement and breakage control • m&h probing system for workpiece measurement with infrared transmitter • Separate control cabinet, spindle cooling, hydraulic unit, chip conveyor • Approx. 20 tool holders, dust extraction, complete enclosure, etc. Condition: good – very good, extremely stable machine with high feed force, precise positioning, and stationary workpiece. Can be shown under power, inspected by factory technician. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Various milling machines and machining centers of all types and sizes always in stock!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.000 mm, The horizontal machining centers of the XpertK series are distinguished by outstanding modularity. Choose from a variety of table configurations and matching milling heads, complemented by a wide range of spindles. XpertK machines are ideal for specialized applications where standard machines are insufficient, offering tailor-made flexibility and individuality. Xpert K 3512 • Horizontal machining center • Series: Xpert K • Travel X/Y/Z: 3500 x 1200 x 1000 mm • Optional Y-Axis: 1600 mm • Milling head: Fork-type milling head M-Series • Spindle: 12,000 rpm / 53 kW / 253 Nm • Tool holder: HSK-A100 • Control: Heidenhain TNC 640 • Clamping surface: 4,000 x 2,200 mm • Payload: 15,000 kg • Rapid traverse: 30 m/min • Acceleration: 3 m/s² Modular expansion, further options: • Sliding table X-axis • Cross table X and W axes • Rotary table X and C axes (Ø 2,000 mm) Hfjdjr H Hhnepfx Ahnsh • Table travel X-axis up to 6,000 mm • Table travel W-axis 1,200 mm • Traversing work unit Y (vertical), Z (slide), and W axes (1,250 mm) • Milling-turning machining possible • 18 spindle variants • Clamping surface extendable up to 6,000 x 2,500 mm