Beli Dmg Sprint 20 5 bekas (396)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 8.574 h, de Redex D Izbspfx Alaet

Tahun pembuatan: 2020, jam operasional: 6.056 h, Kondisi: siap digunakan (bekas), de-001 Redpex D Iv Ejfx Alajt

Tahun pembuatan: 2018, jam operasional: 5.080 h, Kondisi: siap digunakan (bekas), Data Umum Berat mesin: 4700 kg Tinggi mesin: 1852 mm Dimensi Panjang mesin: 1928 mm Unit Kontrol Merek: SIEMENS Model: 840D Penggerak Utama Jumlah sumbu: 3 Kecepatan spindle: 5000 RPM Daya motor spindle: 16,5 kW Rjdpox D Huasfx Alajt Pergerakan Gerakan sumbu X: 242,5 mm Gerakan sumbu Z: 540 mm Gerakan sumbu Y: 80 mm Spesifikasi Teknis Perkakas berputar: ya DMG CLX 350 V4 3-sumbu ini diproduksi tahun 2018 dan memiliki diameter pembubutan maksimum 320 mm, kecepatan spindle hingga 5.000 rpm, serta kapasitas batang Ø 65 mm. Mesin ini dilengkapi turret VDI 30 dengan 12 stasiun untuk perkakas berputar, menambah fleksibilitasnya. Ideal untuk pembubutan presisi dengan kecepatan gerak cepat dan kontrol Siemens 840D sl untuk operasi lanjutan. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Tipe Aplikasi Bubut

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 31.460 h, jarak pergerakan sumbu X: 935 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530 HSCI, beban meja: 1.500 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 60, jumlah sumbu: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It offers an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine features a robust table diameter of 1,040 mm and a maximum table load capacity of 1,500 kg. If you are looking for high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining center we have for sale. Contact us for further details. • Maximum feed rate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operation mode 4: Machining process control (operation with open work area door allowed) • Repairs/Maintenance: • C-axis seal replaced shortly after warranty period (upgraded version) • Spindle replaced (05/2021) Rodpfxeyt Rdre Alast • Machine calibrated last year - circular interpolation (ballbar test) within tolerance • Typical application: • Duralumin machining 80% in total • 3-axis: 50% • 5-axis: 40% (up to 10% simultaneous 5-axis) Additional equipment • Touch probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electronic handwheel • Air gun • Chip conveyor Technical Specification Taper size HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 15.208 h, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 730 mm, jarak gerak sumbu Z: 880 mm, berat keseluruhan: 12.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 21.000 W, jumlah sumbu: 4, This 4-axis DMG MORI NHX 5000 machining center was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and travel ranges of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine is equipped with a robust pallet size of 500 x 500 mm and has a tool capacity of 40 tools. If you are looking for high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining center we are offering for sale. Please contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool holder: BT40 • Tool magazine capacity: 40 tools (optional magazine for 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B-axis: direct drive, indexing 0.001°, max. speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct measuring system; linear scale standard • Control unit: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal light • Water-glycol spindle cooling • Application tuning cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA Rsdjyt Hwzspfx Alaet • Max. input current: 67 A • Protection: 125 A • Short-circuit current: 1.25 kA • Max. supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating hours: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll flow monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper size: BT 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.035 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, jumlah slot dalam magazin alat: 20, produsen pengendali: Heidenhain, tinggi total: 2.665 mm, panjang total: 3.250 mm, lebar total: 2.779 mm, berat keseluruhan: 4.100 kg, panjang meja: 1.200 mm, lebar meja: 560 mm, model controller: Heidenhain TNC 620, torsi: 83 Nm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, daya nominal (semu): 17 kVA, jumlah spindel: 1, pergerakan cepat sumbu Z: 25 m/menit, gerak cepat sumbu X: 25 m/menit, pergeseran cepat sumbu Y: 25 m/menit, kecepatan spindel (maks.): 9.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 720 kg, diameter alat: 80 mm, panjang alat: 300 mm, berat alat: 6.000 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: Used DMC 1035 V eco – Powerful Vertical Machining Centre Upgrade your manufacturing processes with this robust and high-performance DMC 1035 V eco from DMG MORI! This vertical machining centre is ideal for a wide range of milling applications and delivers excellent performance when machining various materials. Rjdpoytryzofx Alaot Key Features: - High rigidity and stability: Ensures precise machining results and long service life. - Large working area: Provides ample space for processing large workpieces. - High spindle speed: Enables fast and efficient machining operations. - Robust construction: Guarantees a long service life and reliable performance. - CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: - Year of manufacture: 2010 - Condition: good, used - Control: Heidenhain TNC 620 - Travel: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 9,000 rpm Ideal For: - General machining - Tool and mould making - Single part and small batch production - Mechanical engineering Why choose this DMC 1035 V eco? This machine has been regularly maintained and is in good used condition. It offers a cost-effective way to expand your production capacity and boost your productivity.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 113 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AL150210302, panjang pembubutan: 336 mm, diameter pembubutan: 440 mm, lubang spindel: 61 mm, kecepatan spindel (maks.): 6.000 rpm, model controller: DMG MORI COMPACT LINE, 1 Redpeytbqvofx Alaot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, DMG MORI CMX 50 U 3+2 tahun 2022 Kontrol Siemens SlimLine Pergerakan: X-500 mm Y-450 mm Z-400 mm B -5 / +110 ° C 360 ° Spindle maksimum 15.000 rpm Magasin alat 60 posisi BBT40 Pendinginan melalui spindle 70 Bar Konveyor serpihan Kertas filter Pompa coolant tekanan tinggi Rsdexyi Hwopfx Alajt Probe benda kerja, probe alat Quickset (kalibrasi sumbu putar) Mesin dalam kondisi sangat baik, tersedia di gudang kami di Prancis, 01360 Loyettes Spesifikasi lengkap di bawah dalam PDF

Kondisi: baik (bekas), Tahun pembuatan: 2016, CNC_Spec_2024 Rjdpfx Aloyyc Dleaet

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 540 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 700 mm, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos control system with Siemens 840D sl Operate, an integrated ytterbium-cw fiber laser, and a compact design with a footprint of just 4 m². Ideally suited for machining diamond tools up to Ø 355 mm and 420 mm in length. If you are looking for high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine that we are offering for sale. Please contact us for further information. • Control system: CELOS with Siemens 840D sl Operate; 21.5" ERGOline control with multi-touch screen • Processes: Laser fine-cutting, laser drilling, laser welding • Machining capacity: Machining of diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC rotary-swivel table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W peak pulse power and 450 W average power • Machining head: 80 mm focal length; collision switch Redpfxeyfv Tvs Alast • Image processing: Camera through beam path for fiber laser • Structure: Robust mineral cast base • Footprint: Approx. 4 m² • Condition/Usage: ~100 operating hours (like new) • Remarks: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment: • Fanuc robot automation • Automatic Keller extraction system • Keller extraction unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, produsen pengendali: SIEMENS, model controller: 840D Powerline, jumlah sumbu: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It is equipped with a Siemens 840D Powerline control unit, VDI 40 tool holder, Y-axis, chip conveyor, and a sub-spindle. The machine has been completely overhauled by Eichten Werkzeugmaschinen GmbH and is therefore in excellent condition. If you are looking for a high-quality turn-mill center, you should consider the DMG CTX 420 Linear V6 that we offer for sale. Please contact us for further information. Rodpfx Alox D R Hgoast Additional Equipment • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Sub-spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter turret with angled tools • Bar loader preparation Machine Advantages Technical Machine Advantages • In the event of a sale, several tool holders, including driven tools, would also be included. Additional Information The machine was completely dismantled, cleaned, all functions tested, and overhauled by Eichten Werkzeugmaschinen GmbH prior to commissioning in December 2023. Therefore, it is in technically excellent condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 22.729 h, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, tinggi total: 2.650 mm, beban meja: 600 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, Pusat pemesinan vertikal 3-sumbu DMG DECKEL MAHO DMC 635V ini diproduksi pada tahun 2007. Mesin ini dilengkapi dengan probe pengukur dan probe 3D, sangat ideal untuk tugas pemesinan presisi. Jika Anda mencari mesin frais berkualitas tinggi, pertimbangkan DMG DECKEL MAHO DMC 635V yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. • Majalah alat: 20 stasiun • Ukuran meja: sekitar 790 × 560 mm Perlengkapan tambahan • Probe 3D • Pendingin: hanya suplai pendingin eksternal (tanpa pendingin internal/spindle berpendingin) • Konveyor serbuk: tidak termasuk Rodpfx Asx D Epcjlaot Dimensi Kedalaman mesin: 2050 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 17.450 h, jarak pergerakan sumbu X: 835 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: SIEMENS, model controller: 840D with ShopMill, lebar meja: 560 mm, panjang meja: 1.000 mm, beban meja: 800 kg, berat keseluruhan: 4.200 kg, jumlah sumbu: 4, Mesin DMG DECKEL MAHO DMC 835V 4-sumbu ini diproduksi pada tahun 2006. Mesin bekas ini sangat ideal untuk pengolahan presisi vertikal dan meskipun usianya, tetap memiliki fungsi yang kokoh. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal DMG DECKEL MAHO DMC 835V ini. Hubungi kami untuk informasi lebih lanjut. Perlengkapan tambahan • Sistem pengukuran linear encoder • Sumbu-A • Handwheel elektronik • Pendingin internal – 25 bar / 30 l/min • Atap kabin • Bantalan spindle baru Rodpfjyrd Hwox Alast Keunggulan mesin Keunggulan teknis mesin • Dudukan alat: sk 40 Informasi tambahan Mesin masih terhubung listrik Dimensi Kedalaman mesin 2100 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 18.071 h, berat keseluruhan: 6.000 kg, jumlah sumbu: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. The machine is ideal for precision vertical turning and is distinguished by its robust construction and reliability. If you are looking for high-quality turning capabilities, you should consider the DMG MORI Gildemeister CTV 250 2nd, which we offer for sale. Contact us for further details. Additional Equipment • Shopturn option Machine Advantages Technical advantages of the machine • Available from • Weight: 6,000 kg • 40 kVA • 58 A max in • 63 A • 400 V • 50 Hz • Control: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5,000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holders • Turret diameter: 340 mm • Hinge belt chip conveyor • 4-color status indicator lamp • Air blower through the main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Travel range Y-axis: mm • Linear guide system • Ball screw spindle • AC servomotor with integrated absolute encoder • Glass scale on guide rails • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply to all turret stations via turret disc • Belt filter system filtration rate: 40 µm • Coolant level monitoring • Integrated work area extraction max. 400 m³/h • Renishaw LP2DD workpiece probe • Probe installed at the loading and unloading station • Probe stylus with pneumatically actuated flap and electric control • Measuring accuracy: 10 µm • Functional plate for additional tools • Machine cabinet temperature regulation max. 40°C • Control cabinet cooling up to 40°C • Hydraulic oil cooler • Remote diagnostic support via internet Rsdpfxox D Nl Is Alaot • Work area flush with 3 flushing unions • Two separately switchable valves with 8 bar pressure • Workpiece outfeed conveyor for parts transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag-chain design • Storage capacity: 30 workpieces diameter 30–70 mm, max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm, max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor with transport prisms • Drag-chain movement controlled by NC axis • Set of drag frames • Minimum workpiece diameter 30 mm, maximum 160 mm • Light barrier for workpiece transport system pickup station • Hold-down device for SRA 160 pallet loading • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and faceplate chuck • Intermediate storage mounted on functional plate • Air blow cleaning for the inner workpiece area • Probe with air blow and two nozzles front and rear • Clamping pressure adjustment with motor-operated valves • Clamping pressure programmable via NC program • Extension of the chip chute at the chip conveyor by 300 mm • Aluminum machining package • Modified sludge pump on chip conveyor • Forced indexing of the belt filter • Larger chip container • Extension of the insert screens on the chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 20.325 h, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 880 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: TNC430, tinggi total: 3.200 mm, lebar meja: 1.250 mm, panjang meja: 1.000 mm, beban meja: 2.000 kg, berat keseluruhan: 18.000 kg, kecepatan spindel (maks.): 8.000 rpm, jumlah slot dalam magazin alat: 120, panjang produk (maks.): 6.000 mm, jumlah sumbu: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It is equipped with a Heidenhain control, an SK50 spindle taper, and 120 tool stations. With a total of 22,180 spindle hours, you should not miss the opportunity to purchase this DMG DMU 125 P hi-dyn universal machining center. Contact us for further details on this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel paths: 1250 x 880 x 800 mm • Tool holder: SK50 • Tool changer: 120 positions in chain magazine Redpfxsx Sz Dhs Alaot • Gripper type: double gripper • Control unit: Heidenhain TNC 430 • Working area: longitudinal 1250 mm, transverse 880 mm, vertical 800 mm • Dimensions: approx. 6 x 8 x 3.20 m (height) • Weight: approx. 18,000 kg • B-axis is indexed Additional Information: • Full enclosure • Through-spindle coolant • Blow air through spindle retrofitted • Chip conveyor • Coolant tank: 600 liters • NC rotary table D1250 x 1000 mm • Maximum table load in center: 2,000 kg • Clamping grid: 9 slots 18H7 at 100 mm intervals • Motor assembly with SK50 gearbox – spindle speed up to 8,000 rpm • Renishaw MP10 SK50 infrared probe • Electronic handwheel • 4 operating modes possible • Rinsing pistol with pump Technical Specification Taper size: SK 50 Through-spindle coolant: Yes Dimensions Machine depth: 8,000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 590 mm, daya motor spindle: 11.000 W, tinggi total: 2.120 mm, berat keseluruhan: 5.500 kg, panjang produk (maks.): 2.900 mm, jumlah sumbu: 3, This DMG Mori Seiki NLX1500MC/500 horizontal lathe was manufactured in 2014. It offers a maximum turning diameter without interference of 366 mm, an X-axis travel of 260 mm, and a Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret featuring 12 live stations, this is a unique opportunity to acquire a DMG Mori Seiki NLX1500MC/500 horizontal lathe. Contact us for further details. • Operating hours: 11,996 Rjdpfjyg Iclox Alaet • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all live), index time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status indicator • Air-conditioned control cabinet • Condition/Availability: Machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar loader interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1,000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus, size 65 • HAINBUCH collets: Ø 6.5 - 10 - 16 - 18 - 20 - 25 - 26 - 30 - 40 mm • Square collets: 20×20 - 35×35 - 40×40 mm • Hexagonal collet: 14 mm • Tool measuring probe • 7 driven tool holders (3 axial, 4 radial) • 15 static tool holders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation and CD-ROM • Clamping brackets for transport and handling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, tinggi total: 2.670 mm, lebar total: 3.288 mm, kecepatan spindel (maks.): 14.000 rpm, daya motor spindle: 15.000 W, panjang produk (maks.): 2.275 mm, jumlah sumbu: 3, This 3-axis DMG DMC 635 V vertical machining center was manufactured in 2008. It features a maximum spindle speed of 14,000 rpm and a powerful 18.5 kW spindle. The machine offers a working area with a table size of 560 × 790 mm and can handle workpieces weighing up to 600 kg. If you are looking for high-quality machining capabilities, you should consider the DMG DMC 635 V, which we are offering for sale. Contact us for further details. • Distance table surface/spindle nose: 720 mm • Working area • Number of pallets: 1 • Table dimensions: 560 × 790 mm • Maximum workpiece weight: 600 kg • Spindle • Maximum torque: 100 / 74 Nm • Tool magazine • Tool holder: SK40 • Tool magazine positions: 20 • Max tool diameter (with adjacent pockets free): 130 mm • Max tool diameter (with adjacent pockets occupied): 80 mm • Maximum tool length: 300 mm • Tool change time: 1.6 s • Chip-to-chip tool change time: 6 s Rsdeykaawepfx Alast • Equipment / Features • Electronic handwheel • Air blast through spindle activated via M-function • Operating hours • Power-on time: 34,484 h • Spindle running time: 25,110 h • Rated power: 35 kVA Technical Specification Taper Size SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 19.478 h, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: SIEMENS, model controller: 840D powerline, beban meja: 600 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, Mesin DMG DECKEL MAHO DMC 635V 3-sumbu ini diproduksi pada tahun 2007. Dilengkapi kontrol Siemens 840D, kecepatan spindle 10.000 rpm, dan pengubah alat dengan 20 posisi. Meja berukuran 790 x 560 mm dengan kapasitas beban maksimum 600 kg. Kecepatan rapid traverse mencapai 30 m/menit. Pertimbangkan untuk membeli pusat pemesinan vertikal DMG DECKEL MAHO DMC 635V ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Rsdjyca Npjpfx Alaot • Jam operasional: 19.478 jam • Ukuran meja: 790 x 560 mm • Kecepatan rapid traverse: 30 m/menit • Pengubah alat: 20 posisi • Kondisi: Kedua mesin dalam kondisi operasional baik Spesifikasi Teknis Ukuran Kerucut SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 17.641 h, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: SIEMENS, model controller: 840D powerline, beban meja: 600 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, Mesin DMG DECKEL MAHO DMC 635V 3-sumbu ini diproduksi pada tahun 2008. Dilengkapi dengan kontrol Siemens 840D, kecepatan spindle 10.000 rpm, dan penukar alat dengan 20 posisi. Mesin ini memiliki ukuran meja 790 x 560 mm dan kapasitas beban maksimum meja 600 kg. Jika Anda mencari mesin frais berkualitas tinggi, pertimbangkan DMG DECKEL MAHO DMC 635V yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Jam operasi: 17.641 jam • Ukuran meja: 790 x 560 mm • Rapid traverse: 30 m/menit Rjdpoyca I Ssfx Alast • Penukar alat: 20 posisi • Kondisi: Kedua mesin dalam kondisi operasional yang baik Spesifikasi Teknis Taper SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 12.421 h, jarak pergerakan sumbu X: 1.035 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 620, kecepatan spindel (maks.): 13.000 rpm, daya motor spindle: 13.000 W, jumlah sumbu: 3, en Redpfx Alsyizk Usast

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: HEIDENHAIN, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 25.000 W, jumlah sumbu: 5, Diese 5-Axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for vertical precision machining, this used machine is a valuable addition to any workshop. Take the opportunity to purchase this vertical machining center DMG DECKEL MAHO DMC 60U RS5, including a Schuler automation system. Contact us for further details. Additional Equipment • Tool Changer & Magazine: Horizontal double gripper / magazine type: chain magazine / capacity: 60 tool stations / tool clamping: according to DIN 69872 / tool breakage control: mechanical version • Schuler automation • Coolant tank: 900 L • ICS (internal coolant supply): Form AD with paper band filter • Probe: Heidenhain TS 641 (infrared) • Tool measurement: Blum laser for measuring tool length and diameter, horizontal/vertical • Rotating viewing window Machine Advantages Rjdsyaam Aspfx Alaet Technical Advantages of the Machine • Production hours: 54,347 operating hours, spindle hours 26,748 (new spindle has 3,500 hours) • Universal milling head with controlled B-axis • Very well-maintained machine, used for high-end applications • Spindle replaced in 2021 at a cost of approx. 40,000 EUR • Service history available Additional Information Disc changer and 4 pallets included, control system: 3D Heidenhain path control "Millplus IT with Millplus IT handwheel" Optional: more pallets Regularly serviced Geometry protocol dated February 5, 2026 Spindle taper regrinding: €1,500-€3,000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 2.265 h, jarak pergerakan sumbu X: 635 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 460 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 810D Powerline, tinggi total: 2.650 mm, beban meja: 600 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah sumbu: 3, en Rjdpfsx D D Htsx Alaet

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 489 h, kecepatan spindel (maks.): 3.250 rpm, daya motor spindle: 33.000 W, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 2, Horizontal lathe from 2021. This DMG MORI CLX 550 features a maximum turning diameter of 480 mm and a turning length of 1,240 mm. It is equipped with a 12-position turret and a maximum spindle speed of 3,250 rpm. If you are looking for a high-quality lathe, you should consider the DMG MORI CLX 550, which we have for sale. Contact us for further details on this machine. • Main spindle • Spindle type: A2-8", AC motor • Max. torque: 630 Nm (40% duty cycle) • Bar capacity: Ø 80 mm • Working area and capacity • Max. turning diameter: 480 mm • Max. turning length: 1,240 mm • Rapid traverse (X/Z): 30 m/min • Axes: Linear guides in all axes (size 45 mm) • Bed: Enhanced bed construction for increased stability • Tooling and turret Rjdpfx Aleympiaoajt • Turret type: VDI 40 • Stations: 12-position turret (one station defective) + 6 BT stations • Measuring system: Direct measuring system for the X-axis • Control and software • Control panel: DMG MORI SLIMline multi-touch • CNC: 19" SIEMENS 840D • Software: ShopTurn, 3D control technology

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, daya motor spindle: 14.000 W, kecepatan spindel (maks.): 5.000 rpm, tinggi total: 2.470 mm, berat keseluruhan: 10.000 kg, jumlah sumbu: 5, This 5-axis DMG MORI CLX 450 TC + Robo2GO was manufactured in 2024. It features a universal turning/milling center with a main spindle speed of up to 5,000 rpm and a milling spindle speed of up to 12,000 rpm. The machine offers a B-axis of ±120°, a Y-axis travel of ±100 mm, and a 30-position chain magazine. It is equipped with a Siemens 840D sl control unit, ensuring high precision. Consider the opportunity to purchase this DMG MORI CLX 450 TC + Robo2GO turning-milling center. Contact us for further information. Additional Equipment • Dynamic dual-pressure clamping for main and counter spindle • Tailstock function for the counter spindle with foot switch Machine Benefits Technical Advantages • Torque: 275/345 Nm • Hollow clamping device: Ø67 mm • B-axis: ±120° • Y-axis: ±100 mm • 30-position chain magazine • Tailstock: hydraulically operated with foot pedal • Document No.: 4224449 Additional Information Rsdpfsx D R U Rsx Alajt Performance: 11 kVA Max input current: 16 A Short-circuit current: 1.25 kA Max voltage: 440 V ±10% Control voltage: 230 V Signal voltage: 24 V Turning/milling spindle—drive power: 8.8/10.5 kW Torque: 73/90 Nm Speed range: 0-12,000 rpm Interface: HSK-A 63 DIN 69893 Dimensions Machine depth: 3,900 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 31.960 h, produsen pengendali: HEIDENHAIN, jumlah sumbu: 2, en Redpfx Ajx Nr T Uolaot