Beli Donau Dr 32 bekas (56)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Guodou Dg D Aepfx Aa Hjg Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Gedpfx Aajxn A Spo Heug Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Gjdpfx Asylnpija Hjug Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base Guodpfx Aasvv Spke Hjg • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: bekas, Tahun pembuatan: 1971, Milling length: 1750 mm Guodpfx Aaey Ayrrj Hog Milling width: 260 mm Module - max.: 10 Table dimensions incl. coolant channel: 460 x 2100 mm Clamping area of the table: 250 x 1850 mm Maximum cutter width: 100 mm Feed rate of milling slide, stepless: 0 - 500 mm/min Rapid traverse: 3000 mm/min Milling head - swivelling: +/- 30° Spindle speed range, 9 steps: 29 - 178 rpm Milling head swivels on both sides for helical gearing: 30° Total power requirement: 4 kW Machine weight approx.: 4 t Space required approx.: 4 x 1.85 x 1.85 m Equipment/Accessories - 7 vices - Change gears - Clamping tools - Documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: ZFM300H 76 2301, Mesin pemotong rak gigi Guodpfxsykpl Nj Aa Hjg