Beli Elba bekas (107)

Kondisi: bekas, Power supply, rectifier, power source, switch-mode power supply, DIN rail power supply, power supply unit, servo module. - Manufacturer: Pilz, power supply unit type P10 APS Hedepk Iq Njpfx Aanjnl - Power supply: ELBA-Electric type Euro Power ESPS835515/X - Plug-in board block: Phoenix Contact SKBI 64/H15 - Dimensions: 120 / 70 / H190 mm - Weight: 0.5 kg/unit.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Scraping capacity at 20m: 108 m³/h, outreach: 20 m, boom angle: 15°, slewing radius: 2080 mm, bucket width: 1170 mm, volume: 1050 l, tilt angle: 320°, max. pulling force: 62 kN, max. load moment: 322 kNm, connected load: 47 kW. Machine dimensions L/W/H: approx. 3200 mm / 2150 mm / 2350 mm, weight: approx. 4600 kg. An on-site inspection is possible. Hedpfxsvf Iz Us Aanjnl

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2003, Pabrik beton dalam kondisi baik. Hodjxaw U Nopfx Aanenl

Kondisi: baru, Offered is a new ELBA hoisting bucket, 2 m³ capacity, track width: 2.08 m. Hedev Tb Epspfx Aanenl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.820 mm, lebar total: 1.400 mm, tinggi total: 1.800 mm, berat keseluruhan: 950 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, kapasitas angkut: 100 kg, Perlengkapan: dokumentasi / manual, Dijual MAFAC Elba sebagai mesin pembersih 2 bak, tahun 2019, dengan sekitar 2500 siklus pembersihan dalam kondisi sangat baik. (Penjualan hanya di dalam Austria) Hnjdpfjwyc Siox Aanol Perlengkapan: - Peniupan impuls udara panas berputar - Sistem pengeringan udara panas stasioner - Filtrasi halus aliran utama MT 1 - Filtrasi halus aliran utama MT 2 - Kontrol kecepatan rotasi keranjang - Lemari kontrol dengan lampu atas - Set penyeimbang - Timer - Kisi pengaman MW 20 - Dosis kimia proporsional terhadap air bersih (2 unit) - Untuk keranjang standar Euro: 600 P x 400 L x 288 T mm

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Tank capacity: 775 l, max. batch weight: 100 kg, heating power: 26 kW, max. temperature: 75°C, basket dimensions (X/Y/Z): 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions (X/Y/Z): approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Includes basket rotation with swivel drive, automatic water filling, and oil separation with a coalescence separator unit and oil collection container. Documentation available. An on-site inspection is possible. Hedswr Dxhepfx Aanonl

Kondisi: baru, ELBARON COB-H13 COBARON Filter Udara Mekanis SN:67494, belum digunakan, 100% berfungsi, lingkup pengiriman sesuai foto. PERHATIAN: Biaya kemasan dan pengiriman silakan ditanyakan secara terpisah! Hjdpfsi D Urbjx Aanonl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1965, Fungsionalitas: berfungsi sepenuhnya, de-001 Hnsdpeyylhasfx Aanol

Kondisi: sangat baik (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, ae97d002 Hnodpfewuutbex Aanol

Kondisi: bekas, Tahun pembuatan: 1955, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M42L/8940, Nomor Penawaran: M42L/8940 Hnedpfx Ajwi Tdbsansl Jenis Mesin: Mesin Press Tenggelam Merek: SACK & KIESSELBACH Tipe: 1000 Tahun Pembuatan: 1955 Daya Tekan: 1000 ton Jarak Bebas: 585 mm Tinggi Kerja: 410 mm Langkah: 380 mm Ukuran Meja: 0/700 mm Lokasi: Di gudang kami

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet. Hjdpfx Aashrnbksnsnl

Kondisi: bekas, Tahun pembuatan: 1997, elektrischer-luftreiniger-2024 Hnedpfjyqux Ujx Aanjl

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Pressing force: max. 630 t Installation height: max. 375 mm Hjdpegwv S Ujfx Aansnl Stroke: max. 275 mm Weight: 4,500 kg.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are being placed on drive system components. Increased power transmission and higher torques with simultaneously smaller installation sizes are the key challenges. As a result of this development, demand for cold-formed splines has increased. With the Vertical Splines Press (VSP), Sack & Kiesselbach provides customers with a solution that offers both technological and logistical advantages compared to conventional technologies such as rolling or broaching. This relatively compact and highly user-friendly press can be configured for either manual or fully automated operation. In addition to the splines press, customers can also obtain the corresponding tooling system and relevant process technology all from a single source. 1 used Vertical Splines Press Make: Sack & Kiesselbach Model: VSP 50/30 Year of manufacture: 2015 Technical Data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Hjdpfsgtty Tjx Aansnl Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between uprights: 530 mm Splines cylinder speed: 3–9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special Equipment: Digital position measuring system Spline tooling for internal toothing

Kondisi: baik (bekas), Tahun pembuatan: 1971, gaya penekanan: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Operation: Oil-hydraulic Table height: 1,175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid downstroke speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Hnedpfx Aajwxw Amonel Drive power: 11 kW Electrical system: 550 V / 60 Hz Specifications subject to confirmation

Kondisi: baik (bekas), 1 used down-stroke press Manufacturer: SACK & KIESSELBACH Year of manufacture: 1962/74 Serial number: 31900 Pressing force: 630 t Stroke: 310 mm Shut height: 320 mm Hnjdpfjul U Svex Aanel Working height: 1200 mm Drive power: 10 kW

Kondisi: bekas, Tahun pembuatan: 1952, Type of machine: Punch Press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of manufacture: 1952 Pressing force: 500 t Hsdpfx Aswxw H Esanjnl Clear opening: 450 mm Location: In Germany

Kondisi: hampir baru (bekas), ITEC/KELBASSA sole washer/hygiene sluice. Brush length: 1600 mm. Hnjdpfjh Eyyaox Aanjl Total dimensions: Length: 2700 mm. Width: 800 mm. Height: 1400 mm. TROO.18

Kondisi: baik (bekas), dimensions (l x w x h) approx.: 3550 x 2400 x 2300 mm Weight approx. 7000 kg Coil weight: 6000 kg Coil width: 1250 mm Max. coil diameter: 2500 mm Coil inner diameter: 480–510 mm Hedpfx Aehhyzcoanjnl Without control cabinet!

Kondisi: baik (bekas), de.001 Hodpeb A Rlrefx Aanenl

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally designed as an automatic transfer press, the machine was converted to manual operation in 2012, but can be retrofitted for automatic operation. The press is still assembled, connected to power, and is in very good condition. Year of manufacture: 2001 Hnodehfwqzjpfx Aansl Pressing force (t): 200 Oil capacity (liters): 1100 Stroke (mm): 300 Table dimensions (LxW) (mm): 600 x 600 Installation space (mm): 1000 Upper ejector stroke (mm): 25 Upper ejector force (t): 10 Total weight (kg): 12,000 Operating pressure (bar): 6 Rapid approach lowering speed (mm/sec): 375 Working speed (mm/sec): 18 - 40

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally designed as an automatic transfer press, it was converted to manual operation in 2012 but can be retrofitted for automatic operation again. The press remains installed, under power, and is in very good condition. Press force in t: 200 Oil capacity in litres: 1100 Stroke in mm: 300 Table dimensions (LxW) in mm: 600 x 600 Hnsdpehtaaqofx Aanel Installation space in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12,000 Operating pressure in bar: 6 Rapid approach speed in mm/sec: 375 Working speed in mm/sec: 18 - 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, de-01 Hsdpexvdr Hjfx Aanenl

Kondisi: baru, stapelbak-verz-met-voorklep-en-deksel-1000-x-800-x-500 Hodjw Nigqopfx Aanjnl

Kondisi: bekas, TECHNICAL DATA - Mobile extractor for dust, smoke, and gas, produced during laser applications. Hedeuhb Eajpfx Aanonl Applicable to the sectors of engraving, welding, and sintering. - Power supply: 230 [V]