Beli Emco Bs 2 bekas (133)

Kondisi: bekas, Tahun pembuatan: 2005, Mesin digunakan untuk pelatihan Emco E 65, tahun pembuatan 2005, kendali Siemens 840 D, jangkauan X/Z 210/610 mm, kapasitas batang maksimum Ø 65 mm, alat digerakkan, Hjdpswv N Susfx Adqsfn sumbu C, spindel utama hingga 4.200 rpm, turret 12 posisi, pemegang alat VDI 30, tailstock, konveyor serbuk, sistem pendingin, penyedot kabut oli,

Kondisi: baik (bekas), jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 500 mm, Manufacturer: EMCO Model: MAXXMILL 500 (new 2014) Control: SIEMENS 840D Year of manufacture: 2014 High-performance spindle: 34.5 kW and 110 Nm torque Single setup to machine 500 x 500 x 475 mm (5-sided machining) Top machine for medium production runs: 15 to 300 parts Spindle hours: 3,560 Specifications Metric X-axis travel: 650 mm Y-axis travel: 550 mm Z-axis travel: 500 mm A-axis: -100° to +100° B-axis: 360,000° Table length: 600 mm Table width: 600 mm Table load: 250 kg X-axis feed rate: 30,000 mm/min Y-axis feed rate: 30,000 mm/min Z-axis feed rate: 30,000 mm/min Tool holder: ISO 40 ISO/BT/MK Spindle power: 34 kW Spindle speed: 10,000 rpm Tool changer: 30 positions ICS (Internal Coolant Supply): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant system: Yes Approximate dimensions Hfedpfjtw Rnfsx Adqen Length: 2,900 mm Width: 3,300 mm Height: 3,000 mm Weight: 9,200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, it does not constitute a representation or contract. We recommend verifying all key details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, working_range Longitudinal travel (X) 350 mm Cross travel (Y) 250 mm Usable vertical travel (Z) 300 mm Distance spindle nose – table surface (min.-max.) 120 – 420 mm Milling Table Cast iron table, ground Clamping surface (LxW) 520 x 300 mm Table surface height above floor 900 mm Max. table load 100 kg Number of T-slots 5 Hsdpow N Nvlefx Adqsfn T-slot size to DIN 650 12 mm T-slot spacing 45 mm Milling Spindle Speed range – direct drive 0 – 10,000 RPM (Three-phase asynchronous motor) Torque (100/60% duty cycle) 33 / 41 Nm Power (100/60% duty cycle) 7 / 8.5 kW Tool holder to DIN ISO 69 871-A SK 30 Drawbar to DIN ISO 69 872 (similar to 7388/2) M12, Type A Tool holder balanced G2.5 (to DIN ISO 1940, at 10,000 rpm) Slide Drives (Servo Motors) Working feed in X / Y / Z 24 m/min Rapid traverse in X / Y / Z 24 m/min Feed force in X / Y / Z 3000 / 3000 / 4000 N Mean positional deviation to VDI 3441 in X / Y / Z 4 / 4 / 4 µm Tool Magazine Tool changer based on S-arm principle with random configuration Number of tool positions 20 Tool change time, direct 2.5 s Max. tool diameter Ø 63 mm Max. tool diameter with free adjacent station Ø 80 mm Max. tool length 200 mm Max. tool weight 5 kg Retraction force 1500 N Max. magazine load 60 kg Coolant Unit (Option) Coolant supply to the milling spindle via 3 nozzles Standard tank capacity 140 l Pump pressure at 50 Hz 3.5 bar Delivery rate at 3.5/1 bar 15 / 65 l/min Pneumatics Supply pressure 6 bar Connection line Ø 10 mm Supply quantity 50 l/min Compressed air quality to DIN ISO 8573-1 Purity class 4 Lubrication System Main spindle bearing Lifetime grease lubrication Guides automatic central oil lubrication Feed screws automatic central oil lubrication Electrical Connection Power supply 3/PE 400 ~ V Permissible voltage fluctuation +10 / -10 % Frequency 50 / 60 Hz Connected load 9 kVA Max. pre-fuse for the machine 20 A gG Required short-circuit current 700 kVA Dimensions / Weights Total height 2200 mm Installation area W x D (without coolant and options) 1600 x 1710 mm Total machine weight 1970 kg (without coolant and options) Standard coolant tank (empty) 60 kg Chip Conveyor Hinged belt conveyor for wet and dry machining Discharge height 500 mm 4th Axis / NC Rotary Table Resolution 0.01 ° Max. speed 44 RPM Max. torque 20 Nm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Technische Daten: • Umlaufdurchmesser über Planschlitten: 430 mm (max. Drehdurchmesser 220 mm) • Drehlänge: max. 670 mm • Spindelbohrung (Freimachungsdurchmesser): 45 mm • HS-Spindelaufnahme DIN 55026 A2-5 • Hauptantriebsleistung: 13 kW • Max. Drehmoment: 78 (100) Nm • Drehzahlbereich: 0–6.300 min⁻¹ • Gegenspindelaufnahme: DIN 55026 A2-4 • Anzahl Werkzeuge: 12 angetriebene Werkzeuge, max. Drehzahl: 0–6.000 min⁻¹ • Werkzeugaufnahme: VDI 25 • Druckerhöhungsstation E45 für zentrale Kühlmittelanlage; Kreiselpumpe 14 bar; Hebepumpe min. 1,5 bar • Späneförderer: Scharnierbandförderer, Auswurfhöhe 1.200 mm • Schwenklader Emcoturn E45 mit Be- und Entladesystem; 2-Finger-Parallelgreifer / 90° Drehmodul • Gurtförderer für RT-Teilezuführung: Länge 1.300 mm / Breite 567 mm; Kettenteilung 27,1 mm (1800L) • Steuerung: Siemens 828 D ⸻ • Anschlusswert: ca. 46 kVA • Spannung: 400 V / 50 Hz • Gewicht: ca. 4.300 kg • Stellfläche: ca. 15 m² Hedpfx Aewl Uu Hodqefn

Kondisi: belum diuji (bekas), Mesin bubut dengan leadscrew dan feed rod, Produsen: Emco, Tipe: Maximat Mentor 10 Hedpfx Asw U Rdhsdqjfn

Kondisi: baik (bekas), EMCOTurn 120 CNC lathe. 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over cross slide: 75 mm, spindle bore: 21 mm, speed range: 150–400 rpm, 8-station tool turret. Ex-college machine. Hfedpfxeu Rd S Ro Adqon

Kondisi: baik (bekas), Tahun pembuatan: 2003, Internal Item No.: 25045 Universal Milling Machine Emco FB4 Year of Manufacture: 2003 + Accessories (Hydraulic machine vice Allmatic 110 / 12x SK40 tool holders in rack) + Electrically inspected until 11/2028 (as per inspection sticker) + 3-axis digital readout Heidenhain ND780 Travel distances: X 450 / Y 300 / Z 350 mm Quill stroke: 100 mm Main drive: 3.2 kW Speed range: 63 - 3150 rpm Milling table: 800 x 400 mm Hfjdpow Hrycofx Adqsn Automatic central lubrication Dimensions (LxWxH): 200 x 200 x 200 cm Weight: 2100 kg

Tahun pembuatan: 1985, Kondisi: siap digunakan (bekas), de Hsdpfx Adsw Epzhsqjfn

Kondisi: bekas, Tahun pembuatan: 2017, Emcomat E300 untuk dijual. Mesin tahun pembuatan 2017. Tipe mesin: EM300x1500 SIEM Beberapa perbaikan telah dilakukan, dan kami mengetahui kekurangan berikut: Geometri telah diperiksa. Hodjw I S Uuopfx Adqefn Rel pemandu Z di area spindle utama (chuck) agak aus. Slider Z miring pada sumbu X dan Y di bawah beban hingga 0,1 mm, artinya pada area ini dengan tekanan penjepit tinggi tidak memungkinkan pengerjaan presisi lagi. Pemutar alat telah diperiksa dan disetel. Sabuk sumbu X diganti dan titik nol mesin diatur. Pelumasan sabuk otomatis - kehilangan oli: masalah sudah diperbaiki setelah pengecekan, saluran oli pelumas diganti. Mesin berfungsi – dengan catatan pada pemandu sumbu Z.

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), X-axis: 210 mm, Z-axis: 610 mm, swing diameter over bed/cross slide: 540/360 mm, max. turning diameter: 310 mm, length: 1,730 mm, width: 2,860 mm, height: 1,880 mm, weight: 4.3 t, equipped with FMB unirobot MH5L-XP automation. Hfsdpfxog Rcf Is Adqon

Kondisi: baik (bekas), Tahun pembuatan: 2000, Swing diameter 340 mm Turning length 2000 mm Control unit FAGOR 8055 Max. workpiece diameter over bed 550 mm Spindle bore 108 mm Spindle speeds - stepless up to 2,500 rpm Drive power 16.5 kW Quill stroke 220 mm Hfsdevwgpbjpfx Adqsn Quill diameter 100 mm Total power requirement 19 kW Machine weight approx. 4,300 kg Space required approx. 4,300 x 1,600 x 1,800 mm This EMCO E 300x2000 cycle lathe is offered including complete accessories. Description: - Coolant system - 1 steady rest, open, 20–145 mm - 1 steady rest, closed, 15–185 mm - 1 faceplate - 1 3-jaw chuck - 1 wedge bar chuck D=400 mm - Parat 4-position tool holder - Various tool holders

Kondisi: bekas, Turning diameter . mm Turning length . mm Swing diameter over cross slide . mm Emco Hyperturn 665, 3 units • Technology: Lathe • Machine designation: EMCO Hyperturn 665 Lathe • Year of manufacture: 2003 / 2012 / 2013 • Control system: Siemens Sinumerik 840D-PCU 50 V1 • Attachments: Coolant system; chip conveyor • Electrical supply data: • Rated current: 110.00 A Hsdpfoqn A Rrjx Adqefn • Backup: 125.00 A • Connected load: 56.00 kW

Kondisi: baik (bekas), Tahun pembuatan: 2006, Maschine wurde ausschließlich für Kunststoff verwendet. Technische Details sind im beigefügten PDF-Dokument ersichtlich. Die von Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Hedpfxou Ibiho Adqefn

Kondisi: bekas, Swing diameter 340 mm Turning length 300 mm Center height 158 mm Control Sinumerik 810T Spindle bore 53 mm Hfsdpfx Adowzyrpsqjn Speed range 60 - 4000 rpm Quill stroke 120 mm Quill diameter 60 mm Tailstock quill taper MT 4 Total power requirement 11/15 kW Machine weight approx. 2200 kg Space requirement approx. 2300 x 2100 x 1800 mm Machine comes from a vocational school Equipment: - SIEMENS control Sinumerik 810T - 8-position tool turret - Coolant system - Collet chuck - Machine lamp - Machine feet - Operating manual

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Werkzeugfräsmaschine Emco Emcomat FB-450 Linear with Position Display – As New Condition, CE-Compliant! Technical Specifications: >> Year of manufacture: 2013 Machine no.: F9A124962 >> Milling table clamping surface: 800 x 400 mm T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 150 kg >> Infinitely variable spindle speeds: 10-5000 rpm >> Infinitely variable feed rates: 10-5000 mm/min Rapid traverse (X-axis): 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (L x W x H): approx. 2.5 x 2 x 2 m >> Main drive motor: 10 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Swing-type enclosure >> Coolant system >> Machine lamp >> Indexing head Hodpowycv Isfx Adqsfn >> Rotary table >> Machine vice >> Steady rest About the machine: Offered for sale is a Emco Emcomat FB-450 Linear universal milling machine with position display. This universal milling machine is in like-new condition. It comes from a government facility, where it was only minimally used for training purposes. The control system is very easy to operate. In addition, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal configuration is very straightforward, thanks to the swiveling vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to inspect and test the machine under power at our facility.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), X-axis: 210 mm, Z-axis: 610 mm, swing diameter over bed/cross slide: 540/360 mm, max. turning diameter: 310 mm, length: 1730 mm, width: 2860 mm, height: 1880 mm, weight: 4.3 t, equipped with FMB unirobot MH5L-XP automation. Hfjdpfsg Rcf Sex Adqon

Kondisi: bekas, Tahun pembuatan: 2007, translation-001 Hjdpfx Adjwx R Rkjqsfn

Kondisi: bekas, Tahun pembuatan: 1990, diameter putar di atas sled silang: 210 mm, lubang spindel: 31 mm, diameter pembubutan: 320 mm, tinggi pusat: 165 mm, Machine can be tested under power and is fully operational. Includes accessories. Collet equipment is included. Hedpewpkd Sefx Adqefn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R6AN3701, panjang pembubutan: 520 mm, diameter pembubutan: 360 mm, jarak pergerakan sumbu X: 210 mm, jarak gerak sumbu Z: 610 mm, kecepatan rotasi (maks.): 6.300 rpm, tinggi total: 1.872 mm, panjang total: 1.941 mm, lebar total: 3.074 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, TECHNICAL DETAILS Working Range Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Slide travel X/Z: 210 / 610 mm Distance between main spindle and tailstock: 805 mm Max. workpiece size with tailstock: Ø160 x 520 mm Main Spindle Spindle nose to DIN 55026: A5 Spindle external diameter in front bearing: Ø80 mm Solid clamping cylinder with draw bar for chuck parts up to: Ø160 mm Hollow clamping cylinder with draw tube max. passage: Ø45.5 mm Max. chuck size (spindle size Ø45): Ø160 mm Tailstock Internal taper: MT4 Tailstock travel: 500 mm Max. thrust force (hydraulically controlled): 8,000 N Feed Drives Feed force X/Z: 5,000 / 7,000 N Rapid traverse speed X/Z: 24 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning repeatability X/Z/Z2: 3 / 5 / 4 µm Main Spindle Drive AC motor power S1/S6 (100/40% duty cycle): 9 / 13 kW Speed range (infinitely variable): 0-6,300 rpm Max. torque: 89 Nm MACHINE DETAILS Dimensions (W x D x H): 3074 mm x 1941 mm x 1872 mm Hfedpowxw H Sofx Adqon

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Tool Milling Machine Emco C40 Linear with Digital Readout, Path Control - Excellent Condition, CE Compliant!! Technical Specifications: >> Year of manufacture: 2008 | Machine no.: BA1DW2503 >> Milling table clamping area: 800 x 400 mm Clamping slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Max. table load: 300 kg >> Infinitely variable spindle speeds: 10-5000 rpm >> Infinitely variable feed rate: 10-2000 mm/min Rapid traverse X: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm Hsdowxxd Ejpfx Adqofn >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Approx. dimensions: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts lists, operating manual >> Enclosure (sliding cabin) >> Coolant system >> Machine lamp >> Indexing head with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered here is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in nearly new condition. It comes from a state-owned facility where it has seen very little use. The control system is very user-friendly. Additionally, the machine features hydraulic clamping both for vertical and horizontal operations. Conversion from vertical to horizontal is very straightforward, simply by swinging the vertical head aside. The Emco has been mechanically and electrically inspected by us. You are welcome to view and test the machine under power at our facility.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R2AP3901, panjang pembubutan: 700 mm, diameter pembubutan: 220 mm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 310 mm, kecepatan rotasi (maks.): 6.300 rpm, tinggi total: 1.940 mm, panjang total: 1.980 mm, lebar total: 2.630 mm, TECHNICAL DETAILS Work Area Swing diameter over bed: Ø430 mm Distance between centres with standard tailstock: 700 mm Maximum turning diameter: Ø220 mm Maximum part length: 510 mm Maximum bar capacity: Ø45 mm Cross slide travel X: 160 mm Longitudinal slide travel Z with manual tailstock: 310 mm Main Spindle Spindle mount to DIN 55026: A5 Spindle nose diameter in front bearing: Ø80 mm Solid clamping cylinder with drawbar for chuck parts up to: Ø165 mm Hollow clamping cylinder with draw tube max. through-hole: Ø45 mm Max. chuck size: Ø160 mm Main Spindle Drive AC motor, power (100% / 40% duty cycle) with integrated holding brake: 9 / 13 kW Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotary Axis) Rotary axis resolution: 0.001° Rapid traverse: 100 rpm Feed Drives AC motors on X and Z axis Feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position repeatability Ps to VDI 3441 in X/Z: 3 / 5 µm Tool System Disc-type turret with directional logic Toolholders to DIN 69880: VDI 30 Hodswxw Aaopfx Adqefn Tool shank section for square tools: 20 x 20 mm Shaft diameter for boring bars: Ø32 mm Number of tool stations: 12 Turret indexing time: 0.14 s Standard Tailstock Travel: 460 mm Quill stroke: 120 mm Quill diameter: Ø60 mm Internal taper for live centre: MT4 Quill thrust: 5,000 N MACHINE DETAILS Installation area: 2.63 m x 1.98 m x 1.94 m Footprint: 3.0 x 1.92 m Height: 1.88 m Weight: 3.8 t

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, EMCO C40 Linear Tool Milling Machine with Digital Display and Path Control - Excellent Condition, CE Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping area: 800 x 400 mm Number of T-slots: 8 T-slot width: 14 mm H8 T-slot pitch: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speed: 10-5000 rpm >> Infinitely variable feed rate: 10-2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions: approx. 2.5 x 2 x 2 m Hjdpfx Adjwxxdfeqsfn >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Swing-away enclosure >> Coolant system >> Machine lamp >> Indexing head with tailstock >> Counter-support >> Röhm machine vice About the machine: For sale is an Emco C40 Linear tool milling machine with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it saw very little use. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal milling is very straightforward thanks to the pivoting vertical head. The Emco has been mechanically and electrically inspected at our facility. Take advantage of the opportunity to view and test the machine under power at our location.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R2EV3502, panjang pembubutan: 310 mm, diameter pembubutan: 220 mm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 310 mm, kecepatan rotasi (maks.): 6.300 rpm, panjang total: 1.630 mm, lebar total: 2.250 mm, berat keseluruhan: 3.300 kg, saluran batang: 45 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, TECHNICAL DETAILS Swing diameter over bed: ø 430 mm Maximum turning diameter: ø 220 mm Maximum turning length: 310 mm Maximum bar passage: ø 45 mm Distance between centers (spindle nose – tailstock center): 687 mm Cross slide travel X-axis travel: 160 mm Z-axis travel: 310 mm Main spindle Spindle mount according to DIN 55026: KK5 Spindle nose diameter at front bearing: ø 80 mm Main spindle drive AC motor, power (100%/40% duty cycle): 9/13 kW With integrated holding brake for driven tools Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-axis (rotary axis) Rotary axis resolution: 0.001° Input for Sinumerik/Fanuc drives: 1,000 / 100 rpm Spindle indexing (disc brake, for driven tools): 0.01° Feed drives AC motors on X and Z axes Feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning accuracy Pₛₙ according to VDI 3441 in X/Z: 3 / 3 µm Tool system Disc turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool interface for square tools: 20 × 20 mm Shank diameter for boring bars: ø 32 mm Number of tool stations: 12 Turret indexing time: 0.14 s MACHINE DETAILS Hfjdpfx Adswxwvaoqjn Total power requirement: 17 kW Machine weight: approx. 3.3 t Space required: 2.25 x 1.63 x 1.94 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters Hedowag Stspfx Adqefn >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis digital position display >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 Hfsdpfxjwvuf To Adqon >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.