Beli Emco 320 bekas (141)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 185 mm, jarak lintasan sumbu Y: 125 mm, jarak gerak sumbu Z: 200 mm, tinggi total: 850 mm, lebar total: 780 mm, berat keseluruhan: 250 kg, kecepatan spindel (maks.): 2.000 rpm, daya motor spindle: 750 W, panjang produk (maks.): 800 mm, jumlah sumbu: 3, en Ncjdpfoy E S Uqox Alker

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, kecepatan spindel (maks.): 5.000 rpm, Diameter batang (maks.): 26 mm, lebar total: 2.200 mm, tinggi total: 2.200 mm, jarak pergerakan sumbu X: 78 mm, jarak lintasan sumbu Y: 210 mm, berat keseluruhan: 2.900 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 840D with EMCO specials, jumlah sumbu: 4, This 4-axis EMCO Turn 420 MC Plus was manufactured in 2005. It offers a maximum turning diameter of 100 mm and a maximum workpiece length of 600 mm. The machine is equipped with a powerful spindle speed range of 0-5000 rpm and a tool changer with 24 positions. If you are looking for a high-quality lathe, you should consider the EMCO Turn 420 MC Plus multi-spindle lathe we are offering for sale. Please contact us for further details. • Condition: Very good; connected and ready for testing • Technical data: • Cross slide travel: 160 mm • Distance between main and sub spindle: 408 mm • Max. turning diameter: 100 mm • Max. workpiece length: 600 mm • Max. bar stock diameter: 26 mm • Travel paths: • X/Z: 78 mm • Main spindle: • Max. torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (front ID): 60 mm • Spindle bore: 38 mm • Sub spindle: • Speed range: 0-5000 rpm • Torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (ID): 60 mm • Clamping length (Ø26 mm): approx. 100 mm • Travel (Z2): 233 mm • C-axis: • Resolution: 0.001° • Rapid traverse: 1000 rpm • Positioning: 3° • Drive power: • Power: 9 kW • Tool changer: • Tool positions: 2 × 12 • VDI slot: VDI 16 • Tool size (square): 16 × 16 mm • Boring bar diameter: 25 mm • Indexing time: 0.4 sec • Driven tools: • Speed range: 0-5000 rpm • Max. torque: 3 Nm • Max. power: 1.6 kW • Number of tools: 2 × 4 • Feed drives: Ncodpoy E Sp Uefx Alksr • Rapid traverse X/Z; X1/Z1: 12/20 m/min • Feed force X: 3000 N • Feed force Z: 3000 N • Acceleration time: 0.1 sec • Coolant system: • Tank capacity: 200 L • Pump output: 0.57 kW • Power consumption: • Connected load: 15 kVA • Supply pressure: 6 bar • Flow rate: 300 L/h • Dimensions: • Center height (top/bottom): 1179 / 1030 mm • Footprint (W × D): 2200 × 1386 mm Additional equipment • Including accessory kit and tool holder Technical Specification Counter Spindle: Yes Driven Tools: Yes

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: Swing diameter over bed: 180 mm Swing diameter over cross slide: 75 mm Turning length: 325 mm Cross travel (X-axis): 56 mm Longitudinal travel (Z-axis): 176 mm Control: Fanuc 21T Spindle speed: 50 - 3,000 rpm Spindle speed range: 0 - 6,300 rpm Spindle nose diameter (front bearing): 50 mm Feed force Z - max.: 3,000 N Spindle bore: 30 mm Main spindle power: max. 3.7 kW Electrical configuration – voltage/frequency: 400 V / 50-60 Hz Machine weight approx.: 1.0 t Machine dimensions approx. (LxWxH): 2.2 x 1.0 x 1.62 m Year of manufacture: 1999, first commissioning in 2000 The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria). It is positioned in the medium performance and size range and is frequently used in training, workshops, and production. It is specifically designed for precision machining of small parts, shafts, and chuck parts. Nodpey Emfwofx Alkjcr Automatic chuck Various accessories Interface for bar feeder available

Kondisi: bekas, Tahun pembuatan: 1999, 9b475c94 Nsdpfx Ajy Emfqelkocr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, daya motor spindle: 22.000 W, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, tinggi total: 2.060 mm, lebar total: 2.800 mm, berat keseluruhan: 6.500 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 828D, panjang produk (maks.): 3.450 mm, jumlah sumbu: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It offers a maximum machining diameter of Ø500 mm and a maximum turning length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D CNC control and features driven tools for greater versatility. If you are looking for high-quality turning and milling capabilities, consider the EMCO EMCOTURN E65 turn-mill center we have for sale. Contact us for further details about this machine. • Working Area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt drive): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing diameter: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Sub spindle: • Speed: 60-5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid traverse speed: 100 rpm • Turret (VDI30): • Tool positions: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Live tooling (VDI30): • Speed: 0-5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed force X: 5000 N • Feed force Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Stroke: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank volume: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optionally 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Electrical supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • Main spindle with C-axis • Driven tools • Hydraulic tailstock • ShopTurn programming • USB and Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional Equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8-95 mm Ncsdpey Enr Ejfx Alksr • Bar length: 150-1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Including part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long swarf, tangled chips, dry and wet machining • Coolant gun (Multiflow): • Adjustable nozzle + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for brass parts! CNC turning and milling center | EMCO HYPERTURN 665 MC Plus with main and sub-spindle, C and Y axes, 2x turrets with 12 driven tool stations each! Technical specifications: Ncsdpfx Asxzq Ncolker Swing diameter over bed: 600 mm Swing diameter over cross-slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm X-axis travel: 270 mm Z-axis travel: 750 mm X2-axis travel: 205 mm Z2-axis travel: 750 mm Y-axis travel: 100 mm (+/- 50 mm) Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Turrets: 2x 12 stations, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with parts ejector Turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tool cabinet with driven and static tool holders, carbide inserts, and toolholders Collet chucks for main and sub-spindle Complete documentation etc. Machine available immediately! Machine ready for operation! We will load the machine! Transport can be organized upon request!

Kondisi: bekas, Tahun pembuatan: 2017, produsen pengendali: Siemens, model controller: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 76 mm Sub Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Ejector: Pneumatic Z-axis travel: 800 mm Turret I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tools: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Turret II (X/Z): Technology: 12-station turret Tool holder: VDI30 Nodpfxey A U Ize Alkscr Driven tools: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/Options: Chip management: Chip conveyor Coolant management: High-pressure coolant system with paper band filter, 40 bar Raw material feed I: Robot interface prepared Raw material feed II: Bar feeder interface prepared Finished parts discharge: Workpiece removal unit with conveyor belt Oil mist extraction: Interface prepared Tool holders: Various fixed and driven holders Additional equipment: Automatic work area door, cleaning pistol

Kondisi: bekas, Tahun pembuatan: 2005, td001 Ncedpfsx Apd Uex Alkjr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 20.941 h, jarak pergerakan sumbu X: 56 mm, jarak gerak sumbu Z: 176 mm, jumlah sumbu: 2, Mesin bubut horizontal, diproduksi pada tahun 1999. EMCO Emcoturn 325 ini memiliki tegangan suplai 3 fasa sebesar 400 V dan arus nominal 9,5 A. Jika Anda mencari kemampuan pembubutan berkualitas tinggi, pertimbangkan mesin EMCO Emcoturn 325 yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Tegangan suplai: 400 V Ncsdpfx Asy A Hw Uelksr • Fase: 3 fasa (3/PE – tiga fasa + grounding/pengaman) • Frekuensi: 50/60 Hz • Arus nominal (IM): 9,5 A • Arus maksimum (Imax): 18 A • Arus hubung singkat (Ik): 6 kA • Duty cycle: S6 – 40% Spesifikasi Teknis Counter spindle: Tidak Driven tools: Tidak

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 11.000 h, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 300 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC620 HSCI, tinggi total: 3.032 mm, beban meja: 50 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 7.000 W, jumlah sumbu: 3, This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features axis travels of 350 mm on the X-axis, 250 mm on the Y-axis, and 300 mm on the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking for high-quality machining capabilities, you should consider the EMCO MAXXMILL 350 vertical machining centre we are offering for sale. Please contact us for further details. Ncodpfjy Aw Nzox Alksr • B-axis swivel range: ±100° • C-axis swivel range: 0-360° • Spindle torque: 33 Nm • Tool magazine: 50 positions • Table surface: Ø 400 mm • Table T-slots: 5 slots, 14 mm size, 75 mm spacing • Table height: 860 mm above floor • Transport dimensions: approx. 1600 mm x 2295 mm • Spindle hours: 11,000 Additional Equipment • Automation: Lang Eco Compact 10 (fully configured/functional) • Chip conveyor: Yes • Supplied accessories: Comprehensive ISO30 tool holder package • Special feature: Custom-made work area hood/cover Technical Specification Taper Size ISO 30

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Segera tersedia dari lokasi: Pusat Pemesinan Vertikal CNC EMCO Tipe VMC 600 Tahun pembuatan 1999 Heidenhain TNC 426 D Handwheel elektronik Perjalanan sumbu X/Y/Z: 1200/410/370 mm SK 40 Magazin alat 24 posisi Kecepatan putar hingga 6000 rpm 3 ragum penjepit Berat 4 ton Harga: Euro 6.500,-- belum termasuk PPN, ex lokasi Nsdpfx Ajy E Nbzelkocr SK 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 15.845 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S6E182501, lubang spindel: 65 mm, kecepatan spindel (maks.): 5.000 rpm, daya motor spindle: 22 W, Mesin sangat terawat, 90% produksi dioperasikan oleh satu orang. Servis dilakukan sesuai rekomendasi pabrikan. Nedsyvtugspfx Alkocr

Kondisi: belum diuji (bekas), Tahun pembuatan: 2002, diameter putar di atas sled silang: 340 mm, panjang pembubutan: 2.000 mm, diameter pembubutan: 570 mm, kecepatan spindel (maks.): 2.500 rpm, berat keseluruhan: 5.000 kg, fagor 8055 lubang spindle 108 mm Ncedpfx Aljx E Au Iskor kapasitas 2000 x 570 mm tatakan steadyl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fanuc 21T control Turning diameter: 158 mm Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm Nedoy Abbnepfx Alkecr 8-position turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Variety of tool holders

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Pusat CNC Bubut dan Milling | EMCO MaxxTurn 45 Produksi komponen bubut lengkap, rentang diameter 6 – 40mm dan panjang 10 – 150 mm Kontrol: FANUC 18i-TF, spindle utama dan spindle belakang, lintasan perjalanan X/Y/Z = 160/+40/-30/510 mm, revolver penukar alat 12 posisi dengan tool driven VDI 25, kecepatan putar maks: 6.000 rpm, pembuangan material, remote control, Ncodpfxjyzy Auj Alker - Pengumpan batang TOP etl 8-50, Tahun 2018, S/N 95692, Panjang = 5.000 mm Inspeksi dapat dilakukan kapan saja sesuai perjanjian.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Pusat CNC Bubut dan Milling | EMCO MaxxTurn 65 Produksi komponen bubut lengkap, rentang diameter 10 – 65 mm dan panjang 10 – 200 mm Kontrol FANUC 31iB, daya 29 kW, spindle utama dan spindle balik, kecepatan spindle maks. 5.000/7.000 rpm, sumbu X/Z = 260/610 mm, revolver pengganti alat 12 posisi dengan alat bertenaga (VDI 40), diameter/panjang pembubutan maks. 320/550 mm, ejektor benda kerja Inspeksi dapat dilakukan kapan saja dengan perjanjian. Ncedeyzywxopfx Alkor

Kondisi: bekas, Tahun pembuatan: 2013, Technical details: Bar diameter: 65 mm Turning length: 644 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 430 mm y-axis: 100 (+-50) mm Spindle speed: 2x 5,000 rpm Indexing per: 2x C-axis, 0.001° degrees Sub-spindle: yes Turret (multiple): 2x 12-position VDI 30 Driven tool stations: 2x 12 positions Tool spindle speed: 2x 4,000 rpm Control: FANUC 18 iTB Total power requirement: 30 kVA Machine weight approx.: 8 t Required floor space approx.: 3.5 x 2.5 x 2.3 m CNC turning center with sub-spindle and Y-axis (upper slide), Water-cooled spindles, High-pressure coolant system 2 x 14 bar, Collet chuck on main and sub-spindle, Bar feeder magazine ENTL 10-65, Nedpfophuwqex Alkjcr Chip conveyor, extensive accessories, Approx. 54,500 power-on hours, approx. 30,500 automatic hours, approx. 14,000 feed hours

Kondisi: baik (bekas), 001 Nodpfxjyz Dg Rj Alkocr

Kondisi: baik (bekas), de__3f4cfb7219 Nedpfjyz Dg Dex Alkecr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A8A R19 52, panjang pembubutan: 225 mm, diameter putar di atas sled silang: 250 mm, diameter pembubutan: 80 mm, daya motor spindle: 4.400 W, kecepatan spindel (min.): 300 rpm, kecepatan spindel (maks.): 6.300 rpm, lubang spindel: 25 mm, jarak pergerakan sumbu X: 100 mm, jarak gerak sumbu Z: 300 mm, Diameter batang (maks.): 25 mm, gores kuas bulu: 50 mm, Perlengkapan: dokumentasi / manual, Info tambahan: turret alat 12-stasiun untuk alat quick change VDI16, logika dua arah untuk alat berputar. Ncjdpfxjxvb Ths Alkor

Kondisi: baik (bekas), Tahun pembuatan: 1995, Description Control: Sinumerik 810M Spindle speed: 5000 rpm Turret head: 12-position Table clamping surface: length 850 mm, width 325 mm Very good condition, regularly serviced. Ncjdpfx Aovt Amuslksr Operating manual in German Number of axes: 3 (X, Y, Z) Travel paths: X 420 mm, Y 330 mm, Z 240 mm Control system: Sinumerik 810 M Max. spindle speed: 5000 rpm Automatic tool changer for 12 tools Tool holder: SK40 Coolant system

Kondisi: baik (bekas), Tahun pembuatan: 1999, Mesin bubut Emco PCturn 120 dengan aksesori dan dokumentasi Ncsdpfxoyhzfys Alkjr

Kondisi: bekas, For sale is a used vertical machining center EMCO VMC 300. Specifications / Details: Manufacturer: EMCO Model: VMC 300 Year of manufacture: approx. 1990 Control: Siemens Sinumerik / 810M Travel ranges: approx. X 420 / Y 330 / Z 400–450 mm Tool holder: SK40 Tool changer: 12-position Table size for comparable machines: approx. 850 x 325 mm Spindle speed for comparable machines: up to 5,000 rpm Machine weight for comparable machines: approx. 2,900 kg Various machine accessories included in storage; can be taken over by arrangement. Comparable VMC-300 offers specify 12-position tool changer, SK40, table 850 x 325 mm, 5,000 rpm and approx. 2,900 kg. Condition: Used, consistent with its age. For visual condition, see photos. Functional status: [The machine was operational until removal / tested under power] Therefore, sale preferably to technically qualified buyers. Scope of delivery: - EMCO VMC 300 - Siemens control - 12-position tool changer - Assorted accessories / storage contents by arrangement Ncsdpfx Aloy D Ut Hjker Notes: Viewing by appointment possible. Loading / collection by arrangement. Sale preferably to commercial customers.

Kondisi: bekas, en Nedpfjy D Utyox Alkecr

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R2DU2101, en-001 Ncjdpsyzn U Eofx Alker