Beli Emco Fb 5 bekas (146)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Pusat CNC Bubut dan Milling | EMCO MaxxTurn 65 Produksi komponen bubut lengkap, rentang diameter 10 – 65 mm dan panjang 10 – 200 mm Kontrol FANUC 31iB, daya 29 kW, spindle utama dan spindle balik, kecepatan spindle maks. 5.000/7.000 rpm, sumbu X/Z = 260/610 mm, revolver pengganti alat 12 posisi dengan alat bertenaga (VDI 40), diameter/panjang pembubutan maks. 320/550 mm, ejektor benda kerja Hnjdeyzywxopfx Adisk Inspeksi dapat dilakukan kapan saja dengan perjanjian.

Kondisi: bekas, Tahun pembuatan: 2013, Technical details: Bar diameter: 65 mm Turning length: 644 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 430 mm y-axis: 100 (+-50) mm Spindle speed: 2x 5,000 rpm Indexing per: 2x C-axis, 0.001° degrees Sub-spindle: yes Turret (multiple): 2x 12-position VDI 30 Driven tool stations: 2x 12 positions Tool spindle speed: 2x 4,000 rpm Control: FANUC 18 iTB Total power requirement: 30 kVA Machine weight approx.: 8 t Required floor space approx.: 3.5 x 2.5 x 2.3 m Hsdjphuwqopfx Adijnk CNC turning center with sub-spindle and Y-axis (upper slide), Water-cooled spindles, High-pressure coolant system 2 x 14 bar, Collet chuck on main and sub-spindle, Bar feeder magazine ENTL 10-65, Chip conveyor, extensive accessories, Approx. 54,500 power-on hours, approx. 30,500 automatic hours, approx. 14,000 feed hours

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S4ES_V16, 1 Hedeyzn Tnopfx Adijnk

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R2EU2002, cnc_drehmaschine_angebot Hnjdpoyzn N Nofx Adiek

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R6L211501, EMCO Turn S65 TM - 2-axis CNC Lathe with EMCO SL1200 Short Bar Loader - 2-axis CNC lathe without tailstock, equipped with driven tools and C-axis - 18 kW drive power - Spindle speed: 0-4200 rpm - Linear guideway system - Digital drive system - Direct spindle encoder - Siemens Sinumerik 828D with ShopTurn conversational programming Equipment - 12-position VDI 30 axial turret with directional logic for up to 12 driven tool holders (5 kW, 20 Nm, 0-5000 rpm) - C-axis for main spindle - Mechanical spindle brake (minimum indexing 0.01°) - Headstock size 65 with spindle interface KK6 (DIN 55026) - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Hydraulic power unit - Chip conveyor interface - Documentation Other - EMCO SL1200 short bar loader ----- Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailored financing options to suit your requirements. Whether it's down payments, installment plans, or customized financing solutions – together, we’ll find the right option for you. On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process, so you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding offer. We provide personal and professional advice. ----- Subject to changes, errors, and prior sale. Hnedpfx Asyzn H Uodijk

Kondisi: perlu perbaikan (bekas), EMCO MAXXTURN 65, tahun produksi 2005, termasuk LM 1200. Mesin saat ini tidak berfungsi. Kemungkinan pompa pada unit pendingin rusak, sehingga collet spindle utama tidak dapat membuka dan menutup. Bar feeder masih berfungsi dengan baik. Hjdpfx Asy Ah Easdionk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, EMCO Concept MILL 55\nYear: 2018\nWith tool changer\nPC-controlled 3-axis universal milling machine for CNC basic training with various industry controls. Machine is fully equipped with complete enclosure, safety devices in accordance with CE, infinitely variable main drive, automatic homing, machine light, electrical and mechanical provisions for automation, PC interface card, PC-to-machine connection cable, data carrier with machine data, tool set for operation, operating manual with spare parts list.\n\nThe interchangeable control system\nThe unique concept of interchangeable control, with which all Concept machines can be equipped, allows the user to be trained on all standard CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians are deployable with great flexibility. And that is a decisive advantage: for both the specialist and the company.\n\nWorking area\n• Longitudinal travel X-axis: 190 mm\n• Cross travel Y-axis: 140 mm\n• Vertical travel Z-axis: 260 mm\n• Min. distance spindle nose – table: 77 mm\n• Max. distance spindle nose – table: 337 mm\n\nMilling table\n• Table size (L x W): 420 x 125 mm\n• T-slots: number, width, spacing: 2 x 11 x 90 mm\n• Max. table load: 10 kg\n\nMilling spindle drive\n• Speed range: 150 - 3500 rpm\n• Power, three-phase asynchronous motor: 0.75 kW\n• Spindle torque: 3.7 Nm\n\nAxes\n• Feed rate: 0 - 2 m/min\n• Maximum feed force X/Y: 800 N\n• Maximum feed force Z: 1000 N\n• Average positioning deviation to VDI 3441 in X/Y: 0.008 mm\n• Average positioning deviation to VDI 3441 in Z: 0.008 mm\n\nTooling system\n• Number of tool stations: 8\n• Tool selection: directional logic\n• Max. tool diameter: 40 mm\n• Max. tool weight: 1 kg\n\nScope of delivery\nEmco Concept Mill 55 with tool changer\nCables\nEasy2Operate\nWinNC Sinumerik Operate\nBase\nLeveling elements\nI/O expansion\nPneumatic expansion\nAutomatic door system\nPneumatic vise\nRobotic interface\nDNC interface\nW-holder package Hnedpfxswkpzlo Adijk

Kondisi: baru, Tahun pembuatan: 2024, EMCO Concept TURN 105 Hodpfjtz S I Hjx Adisnk PC-controlled CNC benchtop lathe Machine complete with full enclosure, safety equipment in accordance with CE, 8-position tool turret, manual tailstock, centralized lubrication, machine lamp, electrical and mechanical preparation for automation, operator's tool kit. Year of manufacture: 2024

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, HT 45 SM2Y / SIEMENS - with driven tools + Y-axis CNC turning center for complete machining of turn-mill parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and subspindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Subspindle - 15 kW Speed range: Main spindle 0 - 7,000 rpm Subspindle 0 - 7,000 rpm Spindle interface (DIN 55026): Main spindle: KK 5 (max. bar capacity ø 45mm) Subspindle: KK 5 Y-axis: • Travel range: +40/-30mm • Rapid traverse speed: 15m/min Includes: • Hollow clamping cylinder on main spindle Hsdpfx Aswvlvvsdionk • Draw tube for main and subspindle • Mechanical spindle brake (main/subspindle) • Parts ejector and flushing through subspindle • Sinumerik 840D-sl / OPERATE control system o SHOPTURN conversational programming o USB interface o Network drive / Ethernet o 15" TFT color monitor o 3D simulation o and much more • 2x 12-station VDI 25 radial tool turrets with direction logic for up to 2x 12 driven tool positions! Swing speed adjustable with feed override switch! Performance data: o Max. 4kW at 2080 rpm o Constant torque 16 Nm o Speed range 0-6000 rpm o C-axis for main and subspindle o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1100mm (hinge belt type) • Coolant unit integrated in chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. wash-down pumps with 3.7 bar • Hydraulic unit • Machine light • Documentation incl.: DE6400 1 pc. Control language German S3Z580 1 pc. 22" multitouch control panel HT45 X3Z160 1 pc. Tool monitoring Siem. 840Dsl X3Z690 1 pc. SHOPTURN/MILL UPGRADE 840DSL/828D X3Z710 1 pc. 4-AXIS TURNING/BALANCE 840DSL/828 S3Z20S 1 pc. Glass scale X1 SIEMENS S3Z21S 1 pc. Glass scale Y1 SIEMENS S3Z23S 1 pc. Glass scale X2 SIEMENS X1Z140 1 pc. Loader interface A8,S2,S3,S4,S6,R2,R6,R9PM S30593 1 pc. Additional price for flat chip conveyor S3Z610 1 pc. Tool measurement HT45 S4Z140 1 pc. Coolant gun S3Z160 1 pc. Cooling unit HT45 S3Z010 1 pc. Oil mist separator MT45/HT45/E45 S3Y300 1 pc. Band filter 600l+conveyor HT45 S30605 1 pc. Preparation HT45 discharge counter spindle S30595 1 pc. Robot interface HT45 S30596 1 pc. Interface to measuring station S30597 1 pc. Interface to unloading automation S30598 1 pc. Wireless probe Renishaw S30599 1 pc. Tool setup by Emco 990717 1 pc. Loading system IRCO ILS-RBL-8008 990718 1 pc. Unloading system IRCO ILS-REX-8008 ..... Year of manufacture: 2018 Machine No. S3A182001

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis and B-axis, designed for complete machining of turn-mill parts. Features integrated spindle motors (ISM) on both main and sub-spindles, equipped with a thermal compensation system (liquid-cooled). Drive power: Main spindle – 29 kW Sub-spindle – 22 kW Speed range: Main spindle: 0-5000 rpm Sub-spindle: 0-7000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (through-bore 65 mm) Sub-spindle: KK 6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered so that resultant cutting forces are distributed across two axes, ensuring extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motorized milling spindle with 24-station tool magazine is integrated on the upper slide system. The swiveling range of 210° can be traversed and interpolated continuously. Preloaded roller guides on all linear axes, digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D CNC control, including: * Hollow clamping cylinder with draw tube * Parts ejector and flushing through the sub-spindle * 12-position VDI 30 turret, radial, with directional logic for up to 12 driven tool stations Swing speed adjustable via feed override Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for both main and sub-spindle - TRANSMIT software for easy C-axis programming Additional features: * Parts catcher for finished workpieces * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (hinged belt type) * Coolant unit integrated into chip conveyor - 1x High-pressure pump (14 bar) - 1x High-pressure pump (14 bar), incl. 20 µm fine filter - 2x Flushing pumps (3.7 bar) * Electrical cabinet climate control unit * Electrostatic oil mist separator * Hydraulic power unit * Machine light * Footswitch interface * Documentation Includes: - Handwheel - PC keyboard - Network readiness - Tool monitoring - Turning window - Cleaning pistol - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401 Hedpfexz Ab Rsx Adisnk

Kondisi: baik (bekas), Tahun pembuatan: 2005, emcoturn345ii-tcm-en Hnedpfx Adeyu Un Rjisk

Kondisi: bekas, Tahun pembuatan: 2016, produsen pengendali: Siemens, model controller: 828D - ShopTurn, Deskripsi: Spindel Utama: Hodpoyxuhyofx Adionk Teknologi: Spindel sabuk Kecepatan: 5.000 rpm Daya (maks): 22 kW Torsi (maks): 305 Nm Lubang batang: 65 mm Penjepitan benda kerja: Chuck 3-jaw, SMW Autoblok 210 BB Pembawa alat (X/Y/Z): Teknologi: Revolver dengan 12 stasiun Pemasangan alat: VDI 30 Penggerak alat: 5.000 rpm, 5 kW, 20 Nm Lintasan X/Y/Z: 260/80/610 mm Kecepatan cepat X/Y/Z: 30/15/30 m/menit Tailstock: Teknologi: Digunakan secara hidrolik Gaya tekan (maks): 8.000 N Langkah: 500 mm Kopis: MK4 Perlengkapan/Aksesoris: Manajemen serpihan: Wadah serpihan Manajemen cairan pendingin: Pompa tekanan tinggi IKZ, 14 bar Pemasokan material mentah: Antarmuka feeder batang siap pakai Pengeluaran bagian jadi: Penangkap bagian dengan konveyor Pemegang alat: Berbagai pemegang tetap dan penggerak bekas Perlengkapan lain: Pistol semprot

Kondisi: baik (bekas), Tahun pembuatan: 2006, Maschine wurde ausschließlich für Kunststoff verwendet. Technische Details sind im beigefügten PDF-Dokument ersichtlich. Die von Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Hnedeu Ibihjpfx Adiok

Kondisi: bekas, Tahun pembuatan: 1999, de-hu-001 Hnedpfoyw Hmfsx Adijk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Integrated spindle motors, counter spindle water-cooled (preloaded roller guides) with Y-axis, on both main and sub spindle. State-of-the-art control technology SINUMERIK ONE with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Spindle speed range: 0–5,000 rpm Hnodpfx Aex E Dncsdiek Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Spindle speed range: 0–7,000 rpm Turret: • 12-position VDI 30 radial turret with directional logic for up to 12 live tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5,000 rpm Y-axis: • Travel: +/-40 mm • Hollow clamping cylinder incl. draw tube • C-axis for both main and sub spindle Further features: • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant material detection • USB interface • Electrical cabinet air conditioning • Enhanced coolant system incl. high-pressure coolant pump (24 bar) • Chuck wash with an additional pump (3.5 bar) • Part ejector and flushing through sub spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English • Electronic handwheel • EMCO TOOL BREAKAGE AND WEAR MONITORING/SINUMERIK ONE • Alternating spindle speeds • SUB SPINDLE AS TAILSTOCK: This cycle enables utilization of the sub spindle with a mounted live center to support workpieces, allowing shaft parts to be clamped and machined on machines without a tailstock using the sub spindle. Max. pressure force is limited to 50% of the maximum axis force. • EMCO PROFI-NET ROBOT INTERFACE for robot integration, with HARTING connector. Signal exchange via Profinet, safety signals 2-channel / potential-free. • Digitization package for Sinumerik. Condition monitoring. • SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard with the following information: - Machine on – AUX ON - Automatic mode - Production mode – program active - Program is running, override between 95-105% - Piece count impulse (M30) - Programmable impulse (M300) 3D MACHINE DATA / MT65-G2: 3D data model of the machine included. Pneumatically actuated finished part catcher for gentle unloading of finished parts, transport into a catch box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connecting the EMCO SL1200 short bar loader. ...etc. Machine available immediately!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 9.848 h, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 640 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and a Y-axis travel of 500 mm, offering versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control system and a spindle speed of 12,000 rpm. If you are looking for high-quality machining options, you should consider the EMCO MC 75-50 vertical machining center that we are offering for sale. Please contact us for further details. Hnodpfx Adeywyq Dsijk • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program Run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, rated current 50 A, max load current 30 A, switching capacity 16 kA • Protection rating: IP54 • Control cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filter unit visible) Additional Equipment • Chip conveyor • Wired electronic handwheel • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted control cabinet cooling unit (Rittal) • Nikken rotary table Technical Specification Taper size SK 40

Kondisi: bekas, Tahun pembuatan: 2006, Diameter of swing: 500 mm Turning length: 1300 mm Control: Fanuc 18i TB Spindle speed range (main spindle): 0 – 3,500 rpm Drive power (main spindle): 33 kW Max. torque: 800 Nm Number of tool stations: 12 axial / 12 direct positions Tool holder: VDI 40 Max. power: 8 kW Max. torque: 35 Nm Speed range – driven tools: 0 – 4,000 rpm X-axis travel: 318 mm Z-axis travel: 1,360 mm Y-axis travel: -60 / +80 mm Tailstock quill taper: MK 4 According to our assessment, the machine is in good used condition and can be inspected under power by appointment. Machine includes: - Cooling unit for spindle head - Hollow chuck cylinder incl. draw tube - Emco interface for bar loader or feeder - Fanuc 18iTB control / Manual Guide dialog programming - Operator’s manuals - Coolant system integrated in chip conveyor with 3.5 bar coolant pump - Chuck flushing system - Control cabinet air conditioning - Hydraulic power unit - Hinged belt chip conveyor, discharge height: 1.15 m - Documentation / MaxxTurn 95 machine manual in German Hodoxrg Dwopfx Adienk - CE certificate Accessories, depicted tools, and clamping devices are only included in the delivery scope if specifically mentioned in the additional information. Technical specifications and information are subject to change and error. Sale subject to prior sale!

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 4.262 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R7AV13, diameter pembubutan: 65 mm, Dapat dinyalakan, kondisi feeder batang tidak diketahui, dilepas dari produksi karena mesin baru tiba. Pada kedua kepala revolver, penggunaan dudukan alat putar dimungkinkan di setiap posisi. Hodpfxjyxxhqj Adisnk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, panjang pembubutan: 744 mm, diameter pembubutan: 430 mm, lubang spindel: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed 600 mm * over cross slide 500 mm Distance main spindle - sub spindle 975 mm Maximum turning diameter 430 mm Maximum turning length 744 mm Maximum bar diameter 65 mm Workpiece size with sub spindle, max. ø 200 x 200 mm Main spindle Drive power 29 kW Speed range 0–5000 rpm Hnodpfeyx U Hiox Adisk Maximum bar passage 65 mm Maximum chuck size 200 mm C-axis *Resolution 0.001° Sub spindle Drive power (100/40% DC) 17/22 kW Speed range 0–7000 rpm Maximum chuck size 200 mm Travel (Z-axis) 750 mm C-axis *Resolution 0.001° Upper tool turret Disc turret with directional logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0–4000 rpm Travel range *X-axis 270 mm *Z-axis 750 mm *Y-axis + 50 mm Lower tool turret Disc turret with directional logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0–4000 rpm Travel range *X-axis 205 mm *Z-axis 750 mm EQUIPMENT/ACCESSORIES  Fully enclosed, electrically interlocked with sliding doors and machine lamp  Bar loader magazine IEMCA Master 890 MP (left side) for bar length 3300 mm, including: – Guide channel – Centering device – Axial displacement  Thermo-compensation systems for integrated spindle motors (liquid cooled)  Hollow clamping cylinder with draw tube for main spindle  Solid clamping cylinder with draw bar for sub spindle  C-axes for main and sub spindle  Transmit software for easy C-axis programming  Y-axis in upper turret (cutting force distribution on 2 axes results in extremely high rigidity)  Drive unit in upper and lower turret  Parts ejector and flushing through the sub spindle  Parts catcher for finished parts Finished part max. ø 65 x 200 mm Finished part weight max. 4.5 kg  Conveyor belt for discharging finished parts from the machine  Turret steady rest including VDI 30 base holder, centrally controlled via coolant supply (14 bar), For diameter range 10–70 mm  Coolant system with 2 high-pressure pumps, each 14 bar, and 2 flushing pumps, each 3.7 bar  Cleaning gun for cleaning clamping devices, covers, and the entire work area with coolant  Chip conveyor (hinged belt) in extended design for portal version, suitable for: – Long steel chips – Chip nests – Wool chips – Dry and wet machining  Electronic oil mist separator, 800–1000 m³/h  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and sub spindle  Foot switch for actuating the clamping devices  HAINBUCH collet chuck size 65 for main spindle, without end stop (without collets)  HAINBUCH collet chuck size 65 for sub spindle, with end stop Type 100 (without collets)  3-color signal lamp (red, green, white)  Serial interface  Levelling elements  Documentation

Kondisi: siap digunakan (bekas), emco-test-m4c-025-hardness-tester Hnodpfx Aeyybt Eediok

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 85 mm, panjang pembubutan: 300 mm, lubang spindel: 25 mm, kecepatan spindel (maks.): 6.300 rpm, kecepatan spindel (min.): 60 rpm, tinggi total: 1.900 mm, panjang total: 1.700 mm, lebar total: 1.300 mm, berat keseluruhan: 1.400 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, EMCO EMCOTURN E25 Mesin Bubut CNC dengan Kontrol Siemens Kondisi: Sangat terawat, siap pakai Lokasi penyimpanan: Graz Produsen/Model: EMCO EMCOTURN E25 Kontrol: Siemens Tahun pembuatan: 2008 GAMBAR/VIDEO: Untuk gambar dan video tambahan dari mesin yang sedang berjalan, silakan hubungi kami Data Teknis: Area kerja: Perjalanan sumbu X: 100 mm Perjalanan sumbu Z: 300 mm Revolver alat: 12 posisi Diameter pembubutan: Ø 85 mm Hedeyxvwiopfx Adienk Jari-jari putar: 225 mm Lubang spindle: Ø 25,5 mm Kecepatan: Minimum: 60 rpm Maksimum: 6300 rpm Pompa pendingin: Ya Berat mesin: 1400 kg Dimensi: Panjang: 1700 mm Lebar: 1300 mm Tinggi: 1900 mm Kontak: Silakan hubungi kami untuk mengatur jadwal kunjungan atau permintaan penawaran!

Kondisi: baik (bekas), Tahun pembuatan: 1999,

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R7 A-Q-2701, Mesin bubut CNC bekas Hnjdpsx Tbcysfx Adijk Merek: EMCO Tipe: Hyperturn 665 Tahun pembuatan: 2002 Kontrol: 840 D Dilengkapi dengan konveyor serpihan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 12.125 h, daya motor spindle: 29.000 W, kecepatan spindel (maks.): 5.000 rpm, produsen pengendali: SIEMENS, model controller: SINUMERIK 840D, jumlah sumbu: 6, This 6-axis EMCO Hyperturn 665MC Plus turning-milling center was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers spindle speeds of up to 5000 rpm on the main spindle and 7000 rpm on the counter spindle. It includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking for high-quality turning and milling capabilities, you should consider the EMCO Hyperturn 665MC Plus machine that we are offering for sale. Contact us for further information about this machine. Hedpfx Adsx D Hwnoisnk Additional Equipment • Tool turret: 12-station VDI 30 radial turret with directional logic for up to 12 driven tool stations • B-PowerMill: Motorized milling spindle with 24-position tool magazine, 210° swivel range • Optional tooling package: Includes static and live tool holders, collet chuck holders, reduction sleeves, and actuation clamps • Hollow clamping cylinder with draw tube / part ejector and flushing through the counter spindle / finished part removal device • Finished part collection device / coolant system in the chip conveyor / high-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / control cabinet air conditioning unit / electrostatic oil mist separator • Hydraulic power unit / machine light / interface for foot switch / signal light • Documentation with handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Workholding device for main spindle: Hainbuch BZI 80 center draw/ Machine Advantages Technical Advantages • Counter spindle: 22 kW / Counter spindle: 0-7000 rpm • Main spindle: kk 6 (bar capacity 65 mm) / Counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • The machine does not have Shopturn programming. It must be programmed using ISO code, with simple cycles available for drilling, milling, indexing, etc. • 12-station turret and a milling spindle

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 4.741 h, produsen pengendali: SIEMENS, model controller: Sinumerik 828D, Horizontal lathe from 2011. This EMCO TURN E25 offers a maximum turning diameter of 85 mm and a turning length of 225 mm. It features a VDI 16 disc turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking for high-quality lathes, consider the EMCO TURN E25 machines we have for sale. Contact us for more information. 2 units available. • Availability: 2 units • Working area: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar passage: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle nose: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tool system: • Turret: VDI 16 disc turret with directional logic • Tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feed & axis performance: • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning accuracy (Ps): 3 µm • Utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA Hnsdsympxnjpfx Adiek • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Additional equipment • Chip conveyor (in relation to the specified machine weight)